linux_dsm_epyc7002/drivers/mfd
Tony Lindgren a613b739b8 mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree
I noticed a regression where the omap sys_clkreq signal will never
trigger for omap3 when booted with device tree while it triggers
when booted in legacy mode. This means voltage scaling does not
do anything when booted with device tree.

Turns out the reason is we fail to initialize the SmartReflex
enable bit in twl4030 with the following error:

twl: not initialized

And that happens because we are wrongly tinkering with the twl4030
registers in arch/arm/mach-omap2/omap_twl.c before the driver is
initialized. Looking at the the SmartReflex bit enable code in
omap_twl.c, we need to always set it.

So let's fix the issue by always enabling the twl4030 SmartReflex
bit in the drivers/mfd/twl-core.c probe, and drop the related
code in omap_twl.c.

Note that we still have some twl4030 tinkering left in omap_twl.c
for the twl6030 case, but that's a different patch.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-23 15:31:05 +01:00
..
88pm80x.c mfd: 88pm80x: Change chip id definition and detection 2013-06-18 09:41:10 +02:00
88pm800.c mfd: marvell: Constify struct mfd_cell where possible 2014-01-06 09:13:26 +00:00
88pm805.c mfd: marvell: Constify struct mfd_cell where possible 2014-01-06 09:13:26 +00:00
88pm860x-core.c mfd: 88pm860x: Remove redundant of_match_ptr 2013-10-23 16:21:53 +01:00
88pm860x-i2c.c mfd: Convert struct i2c_msg initialization to C99 format 2012-09-21 23:40:34 +02:00
aat2870-core.c mfd: aat2870: Fix sparse error 2013-10-23 16:20:44 +01:00
ab3100-core.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
ab3100-otp.c mfd: ab3100-otp: Convert to managed resources for allocating memory 2013-06-13 12:11:39 +02:00
ab8500-core.c mfd: ab8500: Use irqdomain to map interrupts 2014-01-21 08:27:49 +00:00
ab8500-debugfs.c mfd: ab8500-debugfs: Move dereference after check for NULL 2014-01-06 09:13:17 +00:00
ab8500-gpadc.c mfd: ab8500-gpadc: Add CONFIG_PM_SLEEP to suspend/resume 2013-08-14 18:52:51 +01:00
ab8500-sysctrl.c mfd: ab8500-sysctrl: Let sysctrl driver work without pdata 2013-05-21 23:23:21 +02:00
abx500-core.c mfd: abx500-core: Convert to managed resources for allocating memory 2013-06-13 12:11:41 +02:00
adp5520.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
arizona-core.c mfd: Constify struct mfd_cell where possible 2014-01-06 09:13:29 +00:00
arizona-i2c.c mfd: arizona: Include linux/of.h header 2013-10-23 16:22:06 +01:00
arizona-irq.c mfd: arizona: Integrate wm8997 into Arizona mfd 2013-06-18 00:49:52 +02:00
arizona-spi.c mfd: arizona: Include linux/of.h header 2013-10-23 16:22:06 +01:00
arizona.h mfd: arizona: Integrate wm8997 into Arizona mfd 2013-06-18 00:49:52 +02:00
as3711.c mfd: as3711: Include linux/of.h header 2013-10-23 16:22:03 +01:00
as3722.c mfd: as3722: Add watchdog support 2014-01-06 09:13:30 +00:00
asic3.c mfd: Constify struct mfd_cell where possible 2014-01-06 09:13:29 +00:00
cros_ec_i2c.c mfd: cros ec: i2c: Use consistent function names 2014-01-21 08:13:35 +00:00
cros_ec_spi.c mfd: cros ec: spi: Add delay for raising CS 2014-01-21 08:28:06 +00:00
cros_ec.c mfd: Constify struct mfd_cell where possible 2014-01-06 09:13:29 +00:00
cs5535-mfd.c mfd: Remove DEFINE_PCI_DEVICE_TABLE macro 2014-01-21 08:27:45 +00:00
da903x.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
da9052-core.c mfd: dialog: Constify struct mfd_cell where possible 2014-01-06 09:13:25 +00:00
da9052-i2c.c mfd: da9052: Avoid multiwrite mode due to silicon errata 2013-10-23 16:20:32 +01:00
da9052-irq.c mfd: da9052: Introduce da9052-irq.c 2012-11-20 12:21:10 +01:00
da9052-spi.c mfd: da9052: Use spi_get_drvdata() and spi_set_drvdata() 2013-04-09 12:18:16 +02:00
da9055-core.c mfd: dialog: Constify struct mfd_cell where possible 2014-01-06 09:13:25 +00:00
da9055-i2c.c ASoC: da9055: Fix device registration of PMIC and CODEC devices 2014-02-10 13:43:52 +00:00
da9063-core.c mfd: dialog: Constify struct mfd_cell where possible 2014-01-06 09:13:25 +00:00
da9063-i2c.c mfd: da9063: Add Dialog DA9063 core driver 2013-08-20 03:15:52 +02:00
da9063-irq.c mfd: da9063: Add IRQ support 2013-08-20 03:16:00 +02:00
davinci_voicecodec.c mfd: davinci_voicecodec: Provide a regmap for register I/O 2013-09-02 10:27:49 +02:00
db8500-prcmu.c mfd: Constify struct mfd_cell where possible 2014-01-06 09:13:29 +00:00
dbx500-prcmu-regs.h mfd: dbx500: Remove any mention of the BML8580CLK 2013-09-26 11:04:16 +02:00
dm355evm_msp.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
ezx-pcap.c mfd: ezx-pcap: Drop devm_free_irq of devm_ allocated irq 2013-10-23 16:21:17 +01:00
htc-egpio.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
htc-i2cpld.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
htc-pasic3.c mfd: Constify struct mfd_cell where possible 2014-01-06 09:13:29 +00:00
intel_msic.c mfd: intel: Constify struct mfd_cell where possible 2014-01-06 09:13:28 +00:00
janz-cmodio.c mfd: Remove DEFINE_PCI_DEVICE_TABLE macro 2014-01-21 08:27:45 +00:00
jz4740-adc.c mfd: Constify struct mfd_cell where possible 2014-01-06 09:13:29 +00:00
Kconfig mfd: mc13xxx: Remove useless symbol MFD_MC13783 2014-01-21 08:28:09 +00:00
kempld-core.c mfd: Add support for COMe-bHL6 and COMe-cTH6 to Kontron PLD driver 2013-08-14 18:53:19 +01:00
lm3533-core.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
lm3533-ctrlbank.c mfd: Use SI-units for the lm3533 max-current interface 2012-05-20 17:27:02 +02:00
lp3943.c mfd: Add LP3943 MFD driver 2014-01-21 08:27:59 +00:00
lp8788-irq.c mfd: Add lp8788 mfd driver 2012-09-23 20:51:34 +02:00
lp8788.c mfd: Constify struct mfd_cell where possible 2014-01-06 09:13:29 +00:00
lpc_ich.c mfd: Remove DEFINE_PCI_DEVICE_TABLE macro 2014-01-21 08:27:45 +00:00
lpc_sch.c mfd: Remove DEFINE_PCI_DEVICE_TABLE macro 2014-01-21 08:27:45 +00:00
Makefile mfd: Add LP3943 MFD driver 2014-01-21 08:27:59 +00:00
max8907.c mfd: maxim: Constify struct mfd_cell where possible 2014-01-06 09:13:27 +00:00
max8925-core.c mfd: maxim: Constify struct mfd_cell where possible 2014-01-06 09:13:27 +00:00
max8925-i2c.c mfd: max8925: Remove redundant of_match_ptr 2013-10-23 16:21:49 +01:00
max8997-irq.c mfd: Add irq domain support for max8997 interrupts 2012-07-09 00:16:13 +02:00
max8997.c mfd: max8997: Naturalise cross-architecture discrepancies 2014-02-19 13:30:23 +00:00
max8998-irq.c mfd: max8998: Add irq domain support 2013-06-30 23:29:44 +02:00
max8998.c mfd: max8998: Naturalise cross-architecture discrepancies 2014-02-19 13:30:25 +00:00
max14577.c mfd: max14577: max14577_{suspend,resume}() should depend on CONFIG_PM_SLEEP 2014-02-19 13:30:32 +00:00
max77686-irq.c mfd: Allow to specify max77686 interrupt through DT or platform file also 2012-07-09 15:13:42 +02:00
max77686.c mfd: max77686: Fix regmap resource leak on driver remove 2014-01-21 08:28:13 +00:00
max77693-irq.c mfd: max77693: Fix up bug of wrong interrupt number 2013-11-04 09:41:19 +01:00
max77693.c mfd: max77693: Set proper maximum register for MUIC regmap 2014-01-21 08:28:13 +00:00
mc13xxx-core.c mfd: mc13xxx: Simplify probe() & remove() 2014-01-21 08:28:10 +00:00
mc13xxx-i2c.c mfd: mc13xxx: Simplify probe() & remove() 2014-01-21 08:28:10 +00:00
mc13xxx-spi.c mfd: mc13xxx: Simplify probe() & remove() 2014-01-21 08:28:10 +00:00
mc13xxx.h mfd: mc13xxx: Simplify probe() & remove() 2014-01-21 08:28:10 +00:00
mcp-core.c Disintegrate and delete asm/system.h 2012-03-28 15:58:21 -07:00
mcp-sa11x0.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
menelaus.c mfd: menelaus: Use devm_*() functions 2013-08-20 08:51:32 +01:00
mfd-core.c mfd: Revert "mfd: Always assign of_node in mfd_add_device()" 2014-01-21 08:28:14 +00:00
omap-usb-host.c mfd: omap-usb-host: Raw read and write endian fix 2014-01-06 09:13:22 +00:00
omap-usb-tll.c mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync() 2014-01-21 08:29:01 +00:00
omap-usb.h mfd: omap-usb-tll: Move configuration code to omap_tll_init() 2013-04-09 09:46:23 +02:00
palmas.c mfd: palmas: Remove redundant of_match_ptr 2013-10-23 16:22:01 +01:00
pcf50633-adc.c mfd: pcf50633-adc: Use devm_*() functions 2013-08-20 09:27:35 +01:00
pcf50633-core.c mfd: pcf50633: Correct device name for pcf50633 regulator 2013-12-02 17:58:58 +00:00
pcf50633-gpio.c mfd: Include linux/mfd/pcf50633/pmic.h in pcf50633-gpio.c 2012-03-06 18:46:51 +01:00
pcf50633-irq.c mfd: Include linux/mfd/pcf50633/mbc.h in pcf50633-irq.c 2012-03-06 18:46:51 +01:00
pm8xxx-irq.c mfd: remove use of __devexit 2012-11-28 12:22:27 -08:00
pm8921-core.c mfd: pm8921: Potential NULL dereference in pm8921_remove() 2013-11-11 11:22:19 +00:00
rc5t583-irq.c mfd: rc5t583: Fix array subscript is above array bounds 2012-11-26 12:10:51 +01:00
rc5t583.c mfd: Constify struct mfd_cell where possible 2014-01-06 09:13:29 +00:00
rdc321x-southbridge.c mfd: Remove DEFINE_PCI_DEVICE_TABLE macro 2014-01-21 08:27:45 +00:00
retu-mfd.c mfd: Constify struct mfd_cell where possible 2014-01-06 09:13:29 +00:00
rtl8411.c mfd: rtsx: Fix sparse non static symbol warning 2014-01-21 08:28:14 +00:00
rts5209.c mfd: mmc: rtsx: Change default tx phase 2013-08-30 14:24:07 +02:00
rts5227.c For the 3.12 merge window we have one new driver for the DA9063 PMIC 2013-09-07 20:14:19 -07:00
rts5229.c mfd: mmc: rtsx: Change default tx phase 2013-08-30 14:24:07 +02:00
rts5249.c mfd: rtsx: Modify rts5249_optimize_phy 2013-10-23 16:20:59 +01:00
rtsx_pcr.c MFD changes due for the v3.14 merge window 2014-01-21 10:58:17 -08:00
rtsx_pcr.h mfd: rtsx: Add support for card reader rtl8402 2014-01-21 08:28:11 +00:00
sec-core.c mfd: sec-core: sec_pmic_{suspend,resume}() should depend on CONFIG_PM_SLEEP 2014-02-19 13:30:34 +00:00
sec-irq.c mfd: sec: Constify regmap configs and regmap irqs 2014-01-21 08:13:37 +00:00
si476x-cmd.c mfd: si476x: Use get_unaligned_be16() for unaligned be16 loads 2013-05-16 19:15:07 +02:00
si476x-i2c.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
si476x-prop.c mfd: si476x: Add chip properties handling code 2013-04-19 18:37:59 +02:00
sm501.c mfd: Remove DEFINE_PCI_DEVICE_TABLE macro 2014-01-21 08:27:45 +00:00
smsc-ece1099.c mfd: smsc: Add support for smsc gpio io/keypad driver 2012-10-01 15:27:48 +02:00
ssbi.c mfd: ssbi: Mark match table const 2014-01-21 08:28:08 +00:00
sta2x11-mfd.c mfd: sta2x11-mfd: Use named constants for pci_power_t values 2014-01-21 08:29:00 +00:00
stmpe-i2c.c mfd: support stmpe1801 18 bits enhanced port expander 2013-04-09 14:15:58 +02:00
stmpe-spi.c mfd: stmpe: Use spi_get_drvdata() 2013-04-09 12:18:16 +02:00
stmpe.c mfd: stmicro: Constify struct mfd_cell where possible 2014-01-06 09:13:24 +00:00
stmpe.h mfd: stmicro: Constify struct mfd_cell where possible 2014-01-06 09:13:24 +00:00
stw481x.c mfd: Add STw481x driver 2013-10-23 16:21:12 +01:00
syscon.c For the 3.12 merge window we have one new driver for the DA9063 PMIC 2013-09-07 20:14:19 -07:00
t7l66xb.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
tc3589x.c mfd: toshiba: Constify struct mfd_cell where possible 2014-01-06 09:13:26 +00:00
tc6387xb.c mfd: toshiba: Constify struct mfd_cell where possible 2014-01-06 09:13:26 +00:00
tc6393xb.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
ti_am335x_tscadc.c mfd: input: iio: ti_amm335x: Rework TSC/ADC synchronization 2014-01-07 08:45:00 +00:00
ti-ssp.c mfd: ti-ssp: Fix build 2013-11-27 09:35:11 +01:00
timberdale.c mfd: Remove DEFINE_PCI_DEVICE_TABLE macro 2014-01-21 08:27:45 +00:00
timberdale.h
tmio_core.c
tps6105x.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
tps6507x.c mfd: ti: Constify struct mfd_cell where possible 2014-01-06 09:13:29 +00:00
tps6586x.c mfd: tps6586x: Add version detection 2014-01-21 08:28:01 +00:00
tps65010.c mfd: tps65010: Use devm_*() functions 2013-08-20 08:51:48 +01:00
tps65090.c mfd: ti: Constify struct mfd_cell where possible 2014-01-06 09:13:29 +00:00
tps65217.c mfd: tps65217: Naturalise cross-architecture discrepancies 2014-02-19 13:30:30 +00:00
tps65910.c mfd: ti: Constify struct mfd_cell where possible 2014-01-06 09:13:29 +00:00
tps65911-comparator.c mfd: remove use of __devexit 2012-11-28 12:22:27 -08:00
tps65912-core.c mfd: ti: Constify struct mfd_cell where possible 2014-01-06 09:13:29 +00:00
tps65912-i2c.c mfd: tps65912: Convert to managed resources for allocating memory 2013-06-13 12:11:39 +02:00
tps65912-irq.c
tps65912-spi.c mfd: tps65912: Convert to managed resources for allocating memory 2013-06-13 12:11:39 +02:00
tps80031.c mfd: ti: Constify struct mfd_cell where possible 2014-01-06 09:13:29 +00:00
twl4030-audio.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
twl4030-irq.c For the 3.11 merge we only have one new MFD driver for the Kontron PLD. 2013-07-10 11:10:27 -07:00
twl4030-madc.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
twl4030-power.c mfd: twl4030-power: Staticize local functions 2013-08-01 09:55:33 +01:00
twl6030-irq.c mfd: twl6030: Fix endianness problem in IRQ handler 2014-01-21 08:28:57 +00:00
twl6040.c mfd: twl6040: Fix sparse non static symbol warning 2014-01-21 08:28:56 +00:00
twl-core.c mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree 2014-04-23 15:31:05 +01:00
twl-core.h mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files 2012-03-22 13:04:33 +01:00
ucb1x00-assabet.c MFD: ucb1x00-assabet: add support for UCB1x00 GPIO switches 2012-02-18 23:15:44 +00:00
ucb1x00-core.c mfd: ucb1x00-core: Fix error return code in ucb1x00_probe() 2013-10-23 16:20:49 +01:00
ucb1x00-ts.c MFD: ucb1x00: convert to use genirq 2012-02-18 23:15:43 +00:00
ucb1400_core.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
vexpress-config.c mfd: vexpress: Handle pending config transactions 2013-04-26 16:10:03 +02:00
vexpress-sysreg.c mfd: vexpress: Make the driver optional for arm and arm64 2013-06-19 11:32:00 +02:00
viperboard.c mfd: Constify struct mfd_cell where possible 2014-01-06 09:13:29 +00:00
vx855.c mfd: Remove DEFINE_PCI_DEVICE_TABLE macro 2014-01-21 08:27:45 +00:00
wl1273-core.c mfd: wl1273: Use devm_*() functions 2013-08-20 08:51:58 +01:00
wm831x-auxadc.c mfd: Convert wm831x to irq_domain 2012-05-20 17:27:07 +02:00
wm831x-core.c mfd: wolfson: Constify struct mfd_cell where possible 2014-01-06 09:13:25 +00:00
wm831x-i2c.c mfd: wm831x: Use PM ops for shutdown 2014-01-21 08:27:51 +00:00
wm831x-irq.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
wm831x-otp.c mfd: wm831x: Feed the device UUID into device_add_randomness() 2012-07-19 10:38:31 -04:00
wm831x-spi.c mfd: wm831x: Use PM ops for shutdown 2014-01-21 08:27:51 +00:00
wm5102-tables.c mfd: arizona: Mark missing AOD registers as volatile 2013-10-23 16:21:46 +01:00
wm5110-tables.c MFD changes due for the v3.14 merge window 2014-01-21 10:58:17 -08:00
wm8350-core.c mfd: Remove custom wm8350 cache implementation 2012-07-09 00:16:10 +02:00
wm8350-gpio.c
wm8350-i2c.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
wm8350-irq.c mfd: Rely on regmap cache in wm8350 interrupt controller 2012-07-09 00:16:10 +02:00
wm8350-regmap.c mfd: Remove custom wm8350 cache implementation 2012-07-09 00:16:10 +02:00
wm8400-core.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
wm8994-core.c mfd: wm8994-core: Naturalise cross-architecture discrepancies 2014-02-19 13:30:27 +00:00
wm8994-irq.c mfd: Use dev_get_platdata() 2013-07-31 13:01:29 +01:00
wm8994-regmap.c mfd: wm8994: Implement support for WM1811 devices with higher cust_ids 2012-09-14 09:52:11 +02:00
wm8994.h
wm8997-tables.c mfd: arizona: Integrate wm8997 into Arizona mfd 2013-06-18 00:49:52 +02:00