linux_dsm_epyc7002/arch/arm64/Makefile
Ard Biesheuvel 751c263bb7 arm64: remove TEXT_OFFSET randomization
TEXT_OFFSET was recently changed to 0x0, in preparation for its removal
at a later stage, and a warning is emitted into the kernel log when the
bootloader appears to have failed to take the TEXT_OFFSET image header
value into account.

Ironically, this warning itself fails to take TEXT_OFFSET into account,
and compares the kernel image's alignment modulo 2M against a hardcoded
value of 0x0, and so the warning will trigger spuriously when TEXT_OFFSET
randomization is enabled.

Given the intent to get rid of TEXT_OFFSET entirely, let's fix this
oversight by just removing support for TEXT_OFFSET randomization.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200615101939.634391-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2020-06-15 13:10:59 +01:00

190 lines
6.3 KiB
Makefile

#
# arch/arm64/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies.
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1995-2001 by Russell King
LDFLAGS_vmlinux :=--no-undefined -X
CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
ifeq ($(CONFIG_RELOCATABLE), y)
# Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour
# for relative relocs, since this leads to better Image compression
# with the relocation offsets always being zero.
LDFLAGS_vmlinux += -shared -Bsymbolic -z notext -z norelro \
$(call ld-option, --no-apply-dynamic-relocs)
endif
ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
ifeq ($(call ld-option, --fix-cortex-a53-843419),)
$(warning ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum)
else
LDFLAGS_vmlinux += --fix-cortex-a53-843419
endif
endif
ifeq ($(CONFIG_ARM64_USE_LSE_ATOMICS), y)
ifneq ($(CONFIG_ARM64_LSE_ATOMICS), y)
$(warning LSE atomics not supported by binutils)
endif
endif
cc_has_k_constraint := $(call try-run,echo \
'int main(void) { \
asm volatile("and w0, w0, %w0" :: "K" (4294967295)); \
return 0; \
}' | $(CC) -S -x c -o "$$TMP" -,,-DCONFIG_CC_HAS_K_CONSTRAINT=1)
ifeq ($(CONFIG_BROKEN_GAS_INST),y)
$(warning Detected assembler with broken .inst; disassembly will be unreliable)
endif
KBUILD_CFLAGS += -mgeneral-regs-only \
$(compat_vdso) $(cc_has_k_constraint)
KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
KBUILD_CFLAGS += $(call cc-disable-warning, psabi)
KBUILD_AFLAGS += $(compat_vdso)
KBUILD_CFLAGS += $(call cc-option,-mabi=lp64)
KBUILD_AFLAGS += $(call cc-option,-mabi=lp64)
ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
prepare: stack_protector_prepare
stack_protector_prepare: prepare0
$(eval KBUILD_CFLAGS += -mstack-protector-guard=sysreg \
-mstack-protector-guard-reg=sp_el0 \
-mstack-protector-guard-offset=$(shell \
awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}' \
include/generated/asm-offsets.h))
endif
# Ensure that if the compiler supports branch protection we default it
# off, this will be overridden if we are using branch protection.
branch-prot-flags-y += $(call cc-option,-mbranch-protection=none)
ifeq ($(CONFIG_ARM64_PTR_AUTH),y)
branch-prot-flags-$(CONFIG_CC_HAS_SIGN_RETURN_ADDRESS) := -msign-return-address=all
# We enable additional protection for leaf functions as there is some
# narrow potential for ROP protection benefits and no substantial
# performance impact has been observed.
ifeq ($(CONFIG_ARM64_BTI_KERNEL),y)
branch-prot-flags-$(CONFIG_CC_HAS_BRANCH_PROT_PAC_RET_BTI) := -mbranch-protection=pac-ret+leaf+bti
else
branch-prot-flags-$(CONFIG_CC_HAS_BRANCH_PROT_PAC_RET) := -mbranch-protection=pac-ret+leaf
endif
# -march=armv8.3-a enables the non-nops instructions for PAC, to avoid the
# compiler to generate them and consequently to break the single image contract
# we pass it only to the assembler. This option is utilized only in case of non
# integrated assemblers.
branch-prot-flags-$(CONFIG_AS_HAS_PAC) += -Wa,-march=armv8.3-a
endif
KBUILD_CFLAGS += $(branch-prot-flags-y)
ifeq ($(CONFIG_SHADOW_CALL_STACK), y)
KBUILD_CFLAGS += -ffixed-x18
endif
ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
KBUILD_CPPFLAGS += -mbig-endian
CHECKFLAGS += -D__AARCH64EB__
# Prefer the baremetal ELF build target, but not all toolchains include
# it so fall back to the standard linux version if needed.
KBUILD_LDFLAGS += -EB $(call ld-option, -maarch64elfb, -maarch64linuxb)
UTS_MACHINE := aarch64_be
else
KBUILD_CPPFLAGS += -mlittle-endian
CHECKFLAGS += -D__AARCH64EL__
# Same as above, prefer ELF but fall back to linux target if needed.
KBUILD_LDFLAGS += -EL $(call ld-option, -maarch64elf, -maarch64linux)
UTS_MACHINE := aarch64
endif
CHECKFLAGS += -D__aarch64__
ifeq ($(CONFIG_ARM64_MODULE_PLTS),y)
KBUILD_LDS_MODULE += $(srctree)/arch/arm64/kernel/module.lds
endif
ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_REGS),y)
KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
CC_FLAGS_FTRACE := -fpatchable-function-entry=2
endif
# Default value
head-y := arch/arm64/kernel/head.o
# The byte offset of the kernel image in RAM from the start of RAM.
TEXT_OFFSET := 0x0
ifeq ($(CONFIG_KASAN_SW_TAGS), y)
KASAN_SHADOW_SCALE_SHIFT := 4
else
KASAN_SHADOW_SCALE_SHIFT := 3
endif
KBUILD_CFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
KBUILD_CPPFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
KBUILD_AFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
export TEXT_OFFSET
core-y += arch/arm64/
libs-y := arch/arm64/lib/ $(libs-y)
core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
# Default target when executing plain make
boot := arch/arm64/boot
KBUILD_IMAGE := $(boot)/Image.gz
all: Image.gz
Image: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
Image.%: Image
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
zinstall install:
$(Q)$(MAKE) $(build)=$(boot) $@
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
# We use MRPROPER_FILES and CLEAN_FILES now
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
ifeq ($(KBUILD_EXTMOD),)
# We need to generate vdso-offsets.h before compiling certain files in kernel/.
# In order to do that, we should use the archprepare target, but we can't since
# asm-offsets.h is included in some files used to generate vdso-offsets.h, and
# asm-offsets.h is built in prepare0, for which archprepare is a dependency.
# Therefore we need to generate the header after prepare0 has been made, hence
# this hack.
prepare: vdso_prepare
vdso_prepare: prepare0
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso include/generated/vdso-offsets.h
$(if $(CONFIG_COMPAT_VDSO),$(Q)$(MAKE) \
$(build)=arch/arm64/kernel/vdso32 \
include/generated/vdso32-offsets.h)
endif
define archhelp
echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
echo ' Install using (your) ~/bin/installkernel or'
echo ' (distribution) /sbin/installkernel or'
echo ' install to $$(INSTALL_PATH) and run lilo'
endef