mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 17:09:44 +07:00
4a7bc07f5c
Add nodes for GPU (Mali 400) to Exynos3250. This is still limited and not tested: 1. No dynamic voltage and frequency scaling, 2. Not sure what to do with CLK_G3D clock responsible for gating entire IP block (it is now being disabled as unused). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
873 lines
18 KiB
Plaintext
873 lines
18 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Samsung's Exynos3250 based Rinato board device tree source
|
|
*
|
|
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* Device tree source file for Samsung's Rinato board which is based on
|
|
* Samsung Exynos3250 SoC.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "exynos3250.dtsi"
|
|
#include "exynos4412-ppmu-common.dtsi"
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/clock/samsung,s2mps11.h>
|
|
|
|
/ {
|
|
model = "Samsung Rinato board";
|
|
compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
|
|
|
|
aliases {
|
|
i2c7 = &i2c_max77836;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &serial_1;
|
|
};
|
|
|
|
memory@40000000 {
|
|
device_type = "memory";
|
|
reg = <0x40000000 0x1ff00000>;
|
|
};
|
|
|
|
firmware@205f000 {
|
|
compatible = "samsung,secure-firmware";
|
|
reg = <0x0205F000 0x1000>;
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
|
|
power_key {
|
|
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_POWER>;
|
|
label = "power key";
|
|
debounce-interval = <10>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
i2c_max77836: i2c-gpio-0 {
|
|
compatible = "i2c-gpio";
|
|
gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
max77836: subpmic@25 {
|
|
compatible = "maxim,max77836";
|
|
interrupt-parent = <&gpx1>;
|
|
interrupts = <5 IRQ_TYPE_NONE>;
|
|
reg = <0x25>;
|
|
wakeup-source;
|
|
|
|
muic: max77836-muic {
|
|
compatible = "maxim,max77836-muic";
|
|
};
|
|
|
|
regulators {
|
|
compatible = "maxim,max77836-regulator";
|
|
safeout_reg: SAFEOUT {
|
|
regulator-name = "SAFEOUT";
|
|
};
|
|
|
|
charger_reg: CHARGER {
|
|
regulator-name = "CHARGER";
|
|
regulator-min-microamp = <45000>;
|
|
regulator-max-microamp = <475000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
motor_reg: LDO1 {
|
|
regulator-name = "MOT_2.7V";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <2700000>;
|
|
};
|
|
|
|
LDO2 {
|
|
regulator-name = "UNUSED_LDO2";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3950000>;
|
|
};
|
|
};
|
|
|
|
charger {
|
|
compatible = "maxim,max77836-charger";
|
|
|
|
maxim,constant-uvolt = <4350000>;
|
|
maxim,fast-charge-uamp = <225000>;
|
|
maxim,eoc-uamp = <7500>;
|
|
maxim,ovp-uvolt = <6500000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
haptics {
|
|
compatible = "regulator-haptic";
|
|
haptic-supply = <&motor_reg>;
|
|
min-microvolt = <1100000>;
|
|
max-microvolt = <2700000>;
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu_thermal: cpu-thermal {
|
|
cooling-maps {
|
|
map0 {
|
|
/* Corresponds to 500MHz */
|
|
cooling-device = <&cpu0 5 5>,
|
|
<&cpu1 5 5>;
|
|
};
|
|
map1 {
|
|
/* Corresponds to 200MHz */
|
|
cooling-device = <&cpu0 8 8>,
|
|
<&cpu1 8 8>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&adc {
|
|
vdd-supply = <&ldo3_reg>;
|
|
status = "okay";
|
|
assigned-clocks = <&cmu CLK_SCLK_TSADC>;
|
|
assigned-clock-rates = <6000000>;
|
|
|
|
thermistor-ap {
|
|
compatible = "ntc,ncp15wb473";
|
|
pullup-uv = <1800000>;
|
|
pullup-ohm = <100000>;
|
|
pulldown-ohm = <100000>;
|
|
io-channels = <&adc 0>;
|
|
};
|
|
|
|
thermistor-battery {
|
|
compatible = "ntc,ncp15wb473";
|
|
pullup-uv = <1800000>;
|
|
pullup-ohm = <100000>;
|
|
pulldown-ohm = <100000>;
|
|
io-channels = <&adc 1>;
|
|
};
|
|
};
|
|
|
|
&bus_dmc {
|
|
devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
|
|
vdd-supply = <&buck1_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_leftbus {
|
|
devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
|
|
vdd-supply = <&buck3_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_rightbus {
|
|
devfreq = <&bus_leftbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_lcd0 {
|
|
devfreq = <&bus_leftbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_fsys {
|
|
devfreq = <&bus_leftbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_mcuisp {
|
|
devfreq = <&bus_leftbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_isp {
|
|
devfreq = <&bus_leftbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_peril {
|
|
devfreq = <&bus_leftbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_mfc {
|
|
devfreq = <&bus_leftbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu0-supply = <&buck2_reg>;
|
|
};
|
|
|
|
&exynos_usbphy {
|
|
status = "okay";
|
|
vbus-supply = <&safeout_reg>;
|
|
};
|
|
|
|
&hsotg {
|
|
vusb_d-supply = <&ldo15_reg>;
|
|
vusb_a-supply = <&ldo12_reg>;
|
|
dr_mode = "peripheral";
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi_0 {
|
|
vddcore-supply = <&ldo6_reg>;
|
|
vddio-supply = <&ldo6_reg>;
|
|
samsung,burst-clock-frequency = <250000000>;
|
|
samsung,esc-clock-frequency = <20000000>;
|
|
samsung,pll-clock-frequency = <24000000>;
|
|
status = "okay";
|
|
|
|
panel@0 {
|
|
compatible = "samsung,s6e63j0x03";
|
|
reg = <0>;
|
|
vdd3-supply = <&ldo16_reg>;
|
|
vci-supply = <&ldo20_reg>;
|
|
reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
|
|
te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&fimd {
|
|
status = "okay";
|
|
|
|
i80-if-timings {
|
|
cs-setup = <0>;
|
|
wr-setup = <0>;
|
|
wr-act = <1>;
|
|
wr-hold = <0>;
|
|
};
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&buck3_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c_0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-slave-addr = <0x10>;
|
|
samsung,i2c-max-bus-freq = <100000>;
|
|
status = "okay";
|
|
|
|
s2mps14_pmic@66 {
|
|
compatible = "samsung,s2mps14-pmic";
|
|
interrupt-parent = <&gpx0>;
|
|
interrupts = <7 IRQ_TYPE_NONE>;
|
|
reg = <0x66>;
|
|
wakeup-source;
|
|
|
|
s2mps14_osc: clocks {
|
|
compatible = "samsung,s2mps14-clk";
|
|
#clock-cells = <1>;
|
|
clock-output-names = "s2mps14_ap", "unused",
|
|
"s2mps14_bt";
|
|
};
|
|
|
|
regulators {
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "VAP_ALIVE_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "VAP_M1_1.2V";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "VCC_AP_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo4_reg: LDO4 {
|
|
regulator-name = "VAP_AVDD_PLL1";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo5_reg: LDO5 {
|
|
regulator-name = "VAP_PLL_ISO_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "VAP_VMIPI_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "VAP_AVDD_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo8_reg: LDO8 {
|
|
regulator-name = "VAP_USB_3.0V";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo9_reg: LDO9 {
|
|
regulator-name = "V_LPDDR_1.2V";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo10_reg: LDO10 {
|
|
regulator-name = "UNUSED_LDO10";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo11_reg: LDO11 {
|
|
regulator-name = "V_EMMC_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "V_EMMC_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
ldo13_reg: LDO13 {
|
|
regulator-name = "CAM_AVDD_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo14_reg: LDO14 {
|
|
regulator-name = "UNUSED_LDO14";
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2700000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo15_reg: LDO15 {
|
|
regulator-name = "TSP_AVDD_3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo16_reg: LDO16 {
|
|
regulator-name = "LCD_VDD_3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo17_reg: LDO17 {
|
|
regulator-name = "V_IRLED_3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo18_reg: LDO18 {
|
|
regulator-name = "CAM_AF_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo19_reg: LDO19 {
|
|
regulator-name = "TSP_VDD_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo20_reg: LDO20 {
|
|
regulator-name = "LCD_VDD_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo21_reg: LDO21 {
|
|
regulator-name = "CAM_IO_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo22_reg: LDO22 {
|
|
regulator-name = "CAM_DVDD_1.2V";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo23_reg: LDO23 {
|
|
regulator-name = "HRM_VCC_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo24_reg: LDO24 {
|
|
regulator-name = "HRM_VCC_3.3V";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo25_reg: LDO25 {
|
|
regulator-name = "UNUSED_LDO25";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "VAP_MIF_1.0V";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "VAP_ARM_1.0V";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "VAP_INT3D_1.0V";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "VCC_SUB_1.95V";
|
|
regulator-min-microvolt = <1950000>;
|
|
regulator-max-microvolt = <1950000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "VCC_SUB_1.35V";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c_1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-slave-addr = <0x10>;
|
|
samsung,i2c-max-bus-freq = <400000>;
|
|
status = "okay";
|
|
|
|
fuelgauge@36 {
|
|
compatible = "maxim,max77836-battery";
|
|
interrupt-parent = <&gpx1>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
|
reg = <0x36>;
|
|
};
|
|
};
|
|
|
|
&i2s2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpeg {
|
|
status = "okay";
|
|
};
|
|
|
|
&mshc_0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
broken-cd;
|
|
non-removable;
|
|
cap-mmc-highspeed;
|
|
desc-num = <4>;
|
|
mmc-hs200-1_8v;
|
|
card-detect-delay = <200>;
|
|
vmmc-supply = <&ldo12_reg>;
|
|
clock-frequency = <100000000>;
|
|
max-frequency = <100000000>;
|
|
samsung,dw-mshc-ciu-div = <1>;
|
|
samsung,dw-mshc-sdr-timing = <0 1>;
|
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
|
|
bus-width = <8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&serial_0 {
|
|
assigned-clocks = <&cmu CLK_SCLK_UART0>;
|
|
assigned-clock-rates = <100000000>;
|
|
status = "okay";
|
|
};
|
|
|
|
&serial_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&tmu {
|
|
vtmu-supply = <&ldo7_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rtc {
|
|
clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
|
|
clock-names = "rtc", "rtc_src";
|
|
status = "okay";
|
|
};
|
|
|
|
&xusbxti {
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
&pinctrl_0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&initial0 &sleep0>;
|
|
|
|
initial0: initial-state {
|
|
PIN_IN(gpa1-4, DOWN, LV1);
|
|
PIN_IN(gpa1-5, DOWN, LV1);
|
|
|
|
PIN_IN(gpc0-0, DOWN, LV1);
|
|
PIN_IN(gpc0-1, DOWN, LV1);
|
|
PIN_IN(gpc0-2, DOWN, LV1);
|
|
PIN_IN(gpc0-3, DOWN, LV1);
|
|
PIN_IN(gpc0-4, DOWN, LV1);
|
|
|
|
PIN_IN(gpd0-0, DOWN, LV1);
|
|
PIN_IN(gpd0-1, DOWN, LV1);
|
|
};
|
|
|
|
sleep0: sleep-state {
|
|
PIN_SLP(gpa0-0, INPUT, DOWN);
|
|
PIN_SLP(gpa0-1, INPUT, DOWN);
|
|
PIN_SLP(gpa0-2, INPUT, DOWN);
|
|
PIN_SLP(gpa0-3, INPUT, DOWN);
|
|
PIN_SLP(gpa0-4, INPUT, DOWN);
|
|
PIN_SLP(gpa0-5, INPUT, DOWN);
|
|
PIN_SLP(gpa0-6, INPUT, DOWN);
|
|
PIN_SLP(gpa0-7, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpa1-0, INPUT, DOWN);
|
|
PIN_SLP(gpa1-1, INPUT, DOWN);
|
|
PIN_SLP(gpa1-2, INPUT, DOWN);
|
|
PIN_SLP(gpa1-3, INPUT, DOWN);
|
|
PIN_SLP(gpa1-4, INPUT, DOWN);
|
|
PIN_SLP(gpa1-5, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpb-0, PREV, NONE);
|
|
PIN_SLP(gpb-1, PREV, NONE);
|
|
PIN_SLP(gpb-2, PREV, NONE);
|
|
PIN_SLP(gpb-3, PREV, NONE);
|
|
PIN_SLP(gpb-4, INPUT, DOWN);
|
|
PIN_SLP(gpb-5, INPUT, DOWN);
|
|
PIN_SLP(gpb-6, INPUT, DOWN);
|
|
PIN_SLP(gpb-7, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpc0-0, INPUT, DOWN);
|
|
PIN_SLP(gpc0-1, INPUT, DOWN);
|
|
PIN_SLP(gpc0-2, INPUT, DOWN);
|
|
PIN_SLP(gpc0-3, INPUT, DOWN);
|
|
PIN_SLP(gpc0-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpc1-0, INPUT, DOWN);
|
|
PIN_SLP(gpc1-1, INPUT, DOWN);
|
|
PIN_SLP(gpc1-2, INPUT, DOWN);
|
|
PIN_SLP(gpc1-3, INPUT, DOWN);
|
|
PIN_SLP(gpc1-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpd0-0, INPUT, DOWN);
|
|
PIN_SLP(gpd0-1, INPUT, DOWN);
|
|
PIN_SLP(gpd0-2, INPUT, NONE);
|
|
PIN_SLP(gpd0-3, INPUT, NONE);
|
|
|
|
PIN_SLP(gpd1-0, INPUT, NONE);
|
|
PIN_SLP(gpd1-1, INPUT, NONE);
|
|
PIN_SLP(gpd1-2, INPUT, NONE);
|
|
PIN_SLP(gpd1-3, INPUT, NONE);
|
|
};
|
|
};
|
|
|
|
&pinctrl_1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&initial1 &sleep1>;
|
|
|
|
initial1: initial-state {
|
|
PIN_IN(gpe0-6, DOWN, LV1);
|
|
PIN_IN(gpe0-7, DOWN, LV1);
|
|
|
|
PIN_IN(gpe1-0, DOWN, LV1);
|
|
PIN_IN(gpe1-3, DOWN, LV1);
|
|
PIN_IN(gpe1-4, DOWN, LV1);
|
|
PIN_IN(gpe1-5, DOWN, LV1);
|
|
PIN_IN(gpe1-6, DOWN, LV1);
|
|
|
|
PIN_IN(gpk2-0, DOWN, LV1);
|
|
PIN_IN(gpk2-1, DOWN, LV1);
|
|
PIN_IN(gpk2-2, DOWN, LV1);
|
|
PIN_IN(gpk2-3, DOWN, LV1);
|
|
PIN_IN(gpk2-4, DOWN, LV1);
|
|
PIN_IN(gpk2-5, DOWN, LV1);
|
|
PIN_IN(gpk2-6, DOWN, LV1);
|
|
|
|
PIN_IN(gpm0-0, DOWN, LV1);
|
|
PIN_IN(gpm0-1, DOWN, LV1);
|
|
PIN_IN(gpm0-2, DOWN, LV1);
|
|
PIN_IN(gpm0-3, DOWN, LV1);
|
|
PIN_IN(gpm0-4, DOWN, LV1);
|
|
PIN_IN(gpm0-5, DOWN, LV1);
|
|
PIN_IN(gpm0-6, DOWN, LV1);
|
|
PIN_IN(gpm0-7, DOWN, LV1);
|
|
|
|
PIN_IN(gpm1-0, DOWN, LV1);
|
|
PIN_IN(gpm1-1, DOWN, LV1);
|
|
PIN_IN(gpm1-2, DOWN, LV1);
|
|
PIN_IN(gpm1-3, DOWN, LV1);
|
|
PIN_IN(gpm1-4, DOWN, LV1);
|
|
PIN_IN(gpm1-5, DOWN, LV1);
|
|
PIN_IN(gpm1-6, DOWN, LV1);
|
|
|
|
PIN_IN(gpm2-0, DOWN, LV1);
|
|
PIN_IN(gpm2-1, DOWN, LV1);
|
|
|
|
PIN_IN(gpm3-0, DOWN, LV1);
|
|
PIN_IN(gpm3-1, DOWN, LV1);
|
|
PIN_IN(gpm3-2, DOWN, LV1);
|
|
PIN_IN(gpm3-3, DOWN, LV1);
|
|
PIN_IN(gpm3-4, DOWN, LV1);
|
|
|
|
PIN_IN(gpm4-1, DOWN, LV1);
|
|
PIN_IN(gpm4-2, DOWN, LV1);
|
|
PIN_IN(gpm4-3, DOWN, LV1);
|
|
PIN_IN(gpm4-4, DOWN, LV1);
|
|
PIN_IN(gpm4-5, DOWN, LV1);
|
|
PIN_IN(gpm4-6, DOWN, LV1);
|
|
PIN_IN(gpm4-7, DOWN, LV1);
|
|
};
|
|
|
|
sleep1: sleep-state {
|
|
PIN_SLP(gpe0-0, PREV, NONE);
|
|
PIN_SLP(gpe0-1, PREV, NONE);
|
|
PIN_SLP(gpe0-2, INPUT, DOWN);
|
|
PIN_SLP(gpe0-3, INPUT, UP);
|
|
PIN_SLP(gpe0-4, INPUT, DOWN);
|
|
PIN_SLP(gpe0-5, INPUT, DOWN);
|
|
PIN_SLP(gpe0-6, INPUT, DOWN);
|
|
PIN_SLP(gpe0-7, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpe1-0, INPUT, DOWN);
|
|
PIN_SLP(gpe1-1, PREV, NONE);
|
|
PIN_SLP(gpe1-2, INPUT, DOWN);
|
|
PIN_SLP(gpe1-3, INPUT, DOWN);
|
|
PIN_SLP(gpe1-4, INPUT, DOWN);
|
|
PIN_SLP(gpe1-5, INPUT, DOWN);
|
|
PIN_SLP(gpe1-6, INPUT, DOWN);
|
|
PIN_SLP(gpe1-7, INPUT, NONE);
|
|
|
|
PIN_SLP(gpe2-0, INPUT, NONE);
|
|
PIN_SLP(gpe2-1, INPUT, NONE);
|
|
PIN_SLP(gpe2-2, INPUT, NONE);
|
|
|
|
PIN_SLP(gpk0-0, INPUT, DOWN);
|
|
PIN_SLP(gpk0-1, INPUT, DOWN);
|
|
PIN_SLP(gpk0-2, OUT0, NONE);
|
|
PIN_SLP(gpk0-3, INPUT, DOWN);
|
|
PIN_SLP(gpk0-4, INPUT, DOWN);
|
|
PIN_SLP(gpk0-5, INPUT, DOWN);
|
|
PIN_SLP(gpk0-6, INPUT, DOWN);
|
|
PIN_SLP(gpk0-7, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpk1-0, INPUT, DOWN);
|
|
PIN_SLP(gpk1-1, INPUT, DOWN);
|
|
PIN_SLP(gpk1-2, INPUT, DOWN);
|
|
PIN_SLP(gpk1-3, INPUT, DOWN);
|
|
PIN_SLP(gpk1-4, INPUT, DOWN);
|
|
PIN_SLP(gpk1-5, INPUT, DOWN);
|
|
PIN_SLP(gpk1-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpk2-0, INPUT, DOWN);
|
|
PIN_SLP(gpk2-1, INPUT, DOWN);
|
|
PIN_SLP(gpk2-2, INPUT, DOWN);
|
|
PIN_SLP(gpk2-3, INPUT, DOWN);
|
|
PIN_SLP(gpk2-4, INPUT, DOWN);
|
|
PIN_SLP(gpk2-5, INPUT, DOWN);
|
|
PIN_SLP(gpk2-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpl0-0, INPUT, DOWN);
|
|
PIN_SLP(gpl0-1, INPUT, DOWN);
|
|
PIN_SLP(gpl0-2, INPUT, DOWN);
|
|
PIN_SLP(gpl0-3, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm0-0, INPUT, DOWN);
|
|
PIN_SLP(gpm0-1, INPUT, DOWN);
|
|
PIN_SLP(gpm0-2, INPUT, DOWN);
|
|
PIN_SLP(gpm0-3, INPUT, DOWN);
|
|
PIN_SLP(gpm0-4, INPUT, DOWN);
|
|
PIN_SLP(gpm0-5, INPUT, DOWN);
|
|
PIN_SLP(gpm0-6, INPUT, DOWN);
|
|
PIN_SLP(gpm0-7, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm1-0, INPUT, DOWN);
|
|
PIN_SLP(gpm1-1, INPUT, DOWN);
|
|
PIN_SLP(gpm1-2, INPUT, DOWN);
|
|
PIN_SLP(gpm1-3, INPUT, DOWN);
|
|
PIN_SLP(gpm1-4, INPUT, DOWN);
|
|
PIN_SLP(gpm1-5, INPUT, DOWN);
|
|
PIN_SLP(gpm1-6, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm2-0, INPUT, DOWN);
|
|
PIN_SLP(gpm2-1, INPUT, DOWN);
|
|
PIN_SLP(gpm2-2, INPUT, DOWN);
|
|
PIN_SLP(gpm2-3, INPUT, DOWN);
|
|
PIN_SLP(gpm2-4, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm3-0, INPUT, DOWN);
|
|
PIN_SLP(gpm3-1, INPUT, DOWN);
|
|
PIN_SLP(gpm3-2, INPUT, DOWN);
|
|
PIN_SLP(gpm3-3, INPUT, DOWN);
|
|
PIN_SLP(gpm3-4, INPUT, DOWN);
|
|
PIN_SLP(gpm3-5, INPUT, DOWN);
|
|
PIN_SLP(gpm3-6, INPUT, DOWN);
|
|
PIN_SLP(gpm3-7, INPUT, DOWN);
|
|
|
|
PIN_SLP(gpm4-0, INPUT, DOWN);
|
|
PIN_SLP(gpm4-1, INPUT, DOWN);
|
|
PIN_SLP(gpm4-2, INPUT, DOWN);
|
|
PIN_SLP(gpm4-3, INPUT, DOWN);
|
|
PIN_SLP(gpm4-4, INPUT, DOWN);
|
|
PIN_SLP(gpm4-5, INPUT, DOWN);
|
|
PIN_SLP(gpm4-6, INPUT, DOWN);
|
|
PIN_SLP(gpm4-7, INPUT, DOWN);
|
|
};
|
|
};
|