mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 17:01:57 +07:00
3b79919946
Use the new bindings of the Marvell NAND controller driver. Also adapt the NAND controller node organization to distinguish which property is relevant for the controller, and which one is NAND chip specific. Expose the partitions as a subnode of the NAND chip. Remove the 'marvell,nand-enable-arbiter' property, not needed anymore as the new driver activates the arbiter by default for all boards which is either needed or harmless. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
332 lines
6.1 KiB
Plaintext
332 lines
6.1 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Device Tree file for D-Link DNS-327L
|
|
*
|
|
* Copyright (C) 2015, Andrew Andrianov <andrew@ncrmnt.org>
|
|
*/
|
|
|
|
/* Remaining unsolved:
|
|
* There's still some unknown device on i2c address 0x13
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "armada-370.dtsi"
|
|
|
|
/ {
|
|
model = "D-Link DNS-327L";
|
|
compatible = "dlink,dns327l",
|
|
"marvell,armada370",
|
|
"marvell,armada-370-xp";
|
|
|
|
chosen {
|
|
stdout-path = &uart0;
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x20000000>; /* 512 MiB */
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
|
|
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
|
|
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
|
|
|
|
internal-regs {
|
|
sata@a0000 {
|
|
nr-ports = <2>;
|
|
status = "okay";
|
|
};
|
|
|
|
usb@50000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-0 = <
|
|
&backup_button_pin
|
|
&power_button_pin
|
|
&reset_button_pin>;
|
|
pinctrl-names = "default";
|
|
|
|
power-button {
|
|
label = "Power Button";
|
|
linux,code = <KEY_POWER>;
|
|
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
backup-button {
|
|
label = "Backup Button";
|
|
linux,code = <KEY_COPY>;
|
|
gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
reset-button {
|
|
label = "Reset Button";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <
|
|
&sata_l_amber_pin
|
|
&sata_r_amber_pin
|
|
&backup_led_pin
|
|
/* Ensure these are managed by hardware */
|
|
&sata_l_white_pin
|
|
&sata_r_white_pin>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
sata-r-amber-pin {
|
|
label = "dns327l:amber:sata-r";
|
|
gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
|
|
default-state = "keep";
|
|
};
|
|
|
|
sata-l-amber-pin {
|
|
label = "dns327l:amber:sata-l";
|
|
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
|
|
default-state = "keep";
|
|
};
|
|
|
|
backup-led-pin {
|
|
label = "dns327l:white:usb";
|
|
gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
|
|
default-state = "keep";
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
usb_power: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
pinctrl-0 = <&xhci_pwr_pin>;
|
|
pinctrl-names = "default";
|
|
regulator-name = "USB3.0 Port Power";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sata_r_power: regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
reg = <2>;
|
|
pinctrl-0 = <&sata_r_pwr_pin>;
|
|
pinctrl-names = "default";
|
|
regulator-name = "SATA-R Power";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
startup-delay-us = <2000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sata_l_power: regulator@3 {
|
|
compatible = "regulator-fixed";
|
|
reg = <3>;
|
|
pinctrl-0 = <&sata_l_pwr_pin>;
|
|
pinctrl-names = "default";
|
|
regulator-name = "SATA-L Power";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
startup-delay-us = <4000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pciec {
|
|
status = "okay";
|
|
|
|
pcie@1,0 {
|
|
/* Port 0, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
|
|
pcie@2,0 {
|
|
/* Port 1, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
sata_l_white_pin: sata-l-white-pin {
|
|
marvell,pins = "mpp57";
|
|
marvell,function = "sata0";
|
|
};
|
|
|
|
sata_r_white_pin: sata-r-white-pin {
|
|
marvell,pins = "mpp55";
|
|
marvell,function = "sata1";
|
|
};
|
|
|
|
sata_r_amber_pin: sata-r-amber-pin {
|
|
marvell,pins = "mpp52";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
sata_l_amber_pin: sata-l-amber-pin {
|
|
marvell,pins = "mpp53";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
backup_led_pin: backup-led-pin {
|
|
marvell,pins = "mpp61";
|
|
marvell,function = "gpo";
|
|
};
|
|
|
|
xhci_pwr_pin: xhci-pwr-pin {
|
|
marvell,pins = "mpp13";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
sata_r_pwr_pin: sata-r-pwr-pin {
|
|
marvell,pins = "mpp54";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
sata_l_pwr_pin: sata-l-pwr-pin {
|
|
marvell,pins = "mpp56";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
uart1_pins: uart1-pins {
|
|
marvell,pins = "mpp60", "mpp61";
|
|
marvell,function = "uart1";
|
|
};
|
|
|
|
power_button_pin: power-button-pin {
|
|
marvell,pins = "mpp65";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
backup_button_pin: backup-button-pin {
|
|
marvell,pins = "mpp63";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
reset_button_pin: reset-button-pin {
|
|
marvell,pins = "mpp64";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|
|
|
|
/* Serial console */
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* Connected to Weltrend MCU */
|
|
&uart1 {
|
|
pinctrl-0 = <&uart1_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&mdio {
|
|
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
|
|
reg = <0>;
|
|
marvell,reg-init = <0x0 0x16 0x0 0x0002>,
|
|
<0x0 0x19 0x0 0x0077>,
|
|
<0x0 0x18 0x0 0x5747>;
|
|
};
|
|
};
|
|
|
|
ð1 {
|
|
phy = <&phy0>;
|
|
phy-mode = "rgmii-id";
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
compatible = "marvell,mv64xxx-i2c";
|
|
clock-frequency = <100000>;
|
|
status = "okay";
|
|
};
|
|
|
|
&nand_controller {
|
|
status = "okay";
|
|
|
|
nand@0 {
|
|
reg = <0>;
|
|
label = "pxa3xx_nand-0";
|
|
nand-rb = <0>;
|
|
marvell,nand-keep-config;
|
|
nand-on-flash-bbt;
|
|
nand-ecc-strength = <4>;
|
|
nand-ecc-step-size = <512>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
/* 1.0 MiB */
|
|
reg = <0x0000000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "u-boot-env";
|
|
/* 128 KiB */
|
|
reg = <0x100000 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@120000 {
|
|
label = "uImage";
|
|
/* 7 MiB */
|
|
reg = <0x120000 0x700000>;
|
|
};
|
|
|
|
partition@820000 {
|
|
label = "ubifs";
|
|
/* ~ 84 MiB */
|
|
reg = <0x820000 0x54e0000>;
|
|
};
|
|
|
|
/* Hardcoded into stock bootloader */
|
|
partition@5d00000 {
|
|
label = "failsafe-uImage";
|
|
/* 5 MiB */
|
|
reg = <0x5d00000 0x500000>;
|
|
};
|
|
|
|
partition@6200000 {
|
|
label = "failsafe-fs";
|
|
/* 29 MiB */
|
|
reg = <0x6200000 0x1d00000>;
|
|
};
|
|
|
|
partition@7f00000 {
|
|
label = "bbt";
|
|
/* 1 MiB for BBT */
|
|
reg = <0x7f00000 0x100000>;
|
|
};
|
|
};
|
|
};
|
|
};
|