mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 18:20:52 +07:00
597f55e3f3
Add support for new counter device to stm32-lptimer. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
755 lines
18 KiB
C
755 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* STM32 Low-Power Timer Encoder and Counter driver
|
|
*
|
|
* Copyright (C) STMicroelectronics 2017
|
|
*
|
|
* Author: Fabrice Gasnier <fabrice.gasnier@st.com>
|
|
*
|
|
* Inspired by 104-quad-8 and stm32-timer-trigger drivers.
|
|
*
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/counter.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/mfd/stm32-lptimer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
struct stm32_lptim_cnt {
|
|
struct counter_device counter;
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct clk *clk;
|
|
u32 ceiling;
|
|
u32 polarity;
|
|
u32 quadrature_mode;
|
|
bool enabled;
|
|
};
|
|
|
|
static int stm32_lptim_is_enabled(struct stm32_lptim_cnt *priv)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = regmap_read(priv->regmap, STM32_LPTIM_CR, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return FIELD_GET(STM32_LPTIM_ENABLE, val);
|
|
}
|
|
|
|
static int stm32_lptim_set_enable_state(struct stm32_lptim_cnt *priv,
|
|
int enable)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
val = FIELD_PREP(STM32_LPTIM_ENABLE, enable);
|
|
ret = regmap_write(priv->regmap, STM32_LPTIM_CR, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!enable) {
|
|
clk_disable(priv->clk);
|
|
priv->enabled = false;
|
|
return 0;
|
|
}
|
|
|
|
/* LP timer must be enabled before writing CMP & ARR */
|
|
ret = regmap_write(priv->regmap, STM32_LPTIM_ARR, priv->ceiling);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(priv->regmap, STM32_LPTIM_CMP, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* ensure CMP & ARR registers are properly written */
|
|
ret = regmap_read_poll_timeout(priv->regmap, STM32_LPTIM_ISR, val,
|
|
(val & STM32_LPTIM_CMPOK_ARROK),
|
|
100, 1000);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(priv->regmap, STM32_LPTIM_ICR,
|
|
STM32_LPTIM_CMPOKCF_ARROKCF);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_enable(priv->clk);
|
|
if (ret) {
|
|
regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
|
|
return ret;
|
|
}
|
|
priv->enabled = true;
|
|
|
|
/* Start LP timer in continuous mode */
|
|
return regmap_update_bits(priv->regmap, STM32_LPTIM_CR,
|
|
STM32_LPTIM_CNTSTRT, STM32_LPTIM_CNTSTRT);
|
|
}
|
|
|
|
static int stm32_lptim_setup(struct stm32_lptim_cnt *priv, int enable)
|
|
{
|
|
u32 mask = STM32_LPTIM_ENC | STM32_LPTIM_COUNTMODE |
|
|
STM32_LPTIM_CKPOL | STM32_LPTIM_PRESC;
|
|
u32 val;
|
|
|
|
/* Setup LP timer encoder/counter and polarity, without prescaler */
|
|
if (priv->quadrature_mode)
|
|
val = enable ? STM32_LPTIM_ENC : 0;
|
|
else
|
|
val = enable ? STM32_LPTIM_COUNTMODE : 0;
|
|
val |= FIELD_PREP(STM32_LPTIM_CKPOL, enable ? priv->polarity : 0);
|
|
|
|
return regmap_update_bits(priv->regmap, STM32_LPTIM_CFGR, mask, val);
|
|
}
|
|
|
|
static int stm32_lptim_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_ENABLE:
|
|
if (val < 0 || val > 1)
|
|
return -EINVAL;
|
|
|
|
/* Check nobody uses the timer, or already disabled/enabled */
|
|
ret = stm32_lptim_is_enabled(priv);
|
|
if ((ret < 0) || (!ret && !val))
|
|
return ret;
|
|
if (val && ret)
|
|
return -EBUSY;
|
|
|
|
ret = stm32_lptim_setup(priv, val);
|
|
if (ret)
|
|
return ret;
|
|
return stm32_lptim_set_enable_state(priv, val);
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int stm32_lptim_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
|
|
u32 dat;
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = regmap_read(priv->regmap, STM32_LPTIM_CNT, &dat);
|
|
if (ret)
|
|
return ret;
|
|
*val = dat;
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_ENABLE:
|
|
ret = stm32_lptim_is_enabled(priv);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = ret;
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
/* Non-quadrature mode: scale = 1 */
|
|
*val = 1;
|
|
*val2 = 0;
|
|
if (priv->quadrature_mode) {
|
|
/*
|
|
* Quadrature encoder mode:
|
|
* - both edges, quarter cycle, scale is 0.25
|
|
* - either rising/falling edge scale is 0.5
|
|
*/
|
|
if (priv->polarity > 1)
|
|
*val2 = 2;
|
|
else
|
|
*val2 = 1;
|
|
}
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_info stm32_lptim_cnt_iio_info = {
|
|
.read_raw = stm32_lptim_read_raw,
|
|
.write_raw = stm32_lptim_write_raw,
|
|
};
|
|
|
|
static const char *const stm32_lptim_quadrature_modes[] = {
|
|
"non-quadrature",
|
|
"quadrature",
|
|
};
|
|
|
|
static int stm32_lptim_get_quadrature_mode(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan)
|
|
{
|
|
struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
|
|
|
|
return priv->quadrature_mode;
|
|
}
|
|
|
|
static int stm32_lptim_set_quadrature_mode(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
unsigned int type)
|
|
{
|
|
struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
|
|
|
|
if (stm32_lptim_is_enabled(priv))
|
|
return -EBUSY;
|
|
|
|
priv->quadrature_mode = type;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_enum stm32_lptim_quadrature_mode_en = {
|
|
.items = stm32_lptim_quadrature_modes,
|
|
.num_items = ARRAY_SIZE(stm32_lptim_quadrature_modes),
|
|
.get = stm32_lptim_get_quadrature_mode,
|
|
.set = stm32_lptim_set_quadrature_mode,
|
|
};
|
|
|
|
static const char * const stm32_lptim_cnt_polarity[] = {
|
|
"rising-edge", "falling-edge", "both-edges",
|
|
};
|
|
|
|
static int stm32_lptim_cnt_get_polarity(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan)
|
|
{
|
|
struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
|
|
|
|
return priv->polarity;
|
|
}
|
|
|
|
static int stm32_lptim_cnt_set_polarity(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
unsigned int type)
|
|
{
|
|
struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
|
|
|
|
if (stm32_lptim_is_enabled(priv))
|
|
return -EBUSY;
|
|
|
|
priv->polarity = type;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_enum stm32_lptim_cnt_polarity_en = {
|
|
.items = stm32_lptim_cnt_polarity,
|
|
.num_items = ARRAY_SIZE(stm32_lptim_cnt_polarity),
|
|
.get = stm32_lptim_cnt_get_polarity,
|
|
.set = stm32_lptim_cnt_set_polarity,
|
|
};
|
|
|
|
static ssize_t stm32_lptim_cnt_get_ceiling(struct stm32_lptim_cnt *priv,
|
|
char *buf)
|
|
{
|
|
return snprintf(buf, PAGE_SIZE, "%u\n", priv->ceiling);
|
|
}
|
|
|
|
static ssize_t stm32_lptim_cnt_set_ceiling(struct stm32_lptim_cnt *priv,
|
|
const char *buf, size_t len)
|
|
{
|
|
int ret;
|
|
|
|
if (stm32_lptim_is_enabled(priv))
|
|
return -EBUSY;
|
|
|
|
ret = kstrtouint(buf, 0, &priv->ceiling);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (priv->ceiling > STM32_LPTIM_MAX_ARR)
|
|
return -EINVAL;
|
|
|
|
return len;
|
|
}
|
|
|
|
static ssize_t stm32_lptim_cnt_get_preset_iio(struct iio_dev *indio_dev,
|
|
uintptr_t private,
|
|
const struct iio_chan_spec *chan,
|
|
char *buf)
|
|
{
|
|
struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
|
|
|
|
return stm32_lptim_cnt_get_ceiling(priv, buf);
|
|
}
|
|
|
|
static ssize_t stm32_lptim_cnt_set_preset_iio(struct iio_dev *indio_dev,
|
|
uintptr_t private,
|
|
const struct iio_chan_spec *chan,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
|
|
|
|
return stm32_lptim_cnt_set_ceiling(priv, buf, len);
|
|
}
|
|
|
|
/* LP timer with encoder */
|
|
static const struct iio_chan_spec_ext_info stm32_lptim_enc_ext_info[] = {
|
|
{
|
|
.name = "preset",
|
|
.shared = IIO_SEPARATE,
|
|
.read = stm32_lptim_cnt_get_preset_iio,
|
|
.write = stm32_lptim_cnt_set_preset_iio,
|
|
},
|
|
IIO_ENUM("polarity", IIO_SEPARATE, &stm32_lptim_cnt_polarity_en),
|
|
IIO_ENUM_AVAILABLE("polarity", &stm32_lptim_cnt_polarity_en),
|
|
IIO_ENUM("quadrature_mode", IIO_SEPARATE,
|
|
&stm32_lptim_quadrature_mode_en),
|
|
IIO_ENUM_AVAILABLE("quadrature_mode", &stm32_lptim_quadrature_mode_en),
|
|
{}
|
|
};
|
|
|
|
static const struct iio_chan_spec stm32_lptim_enc_channels = {
|
|
.type = IIO_COUNT,
|
|
.channel = 0,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_ENABLE) |
|
|
BIT(IIO_CHAN_INFO_SCALE),
|
|
.ext_info = stm32_lptim_enc_ext_info,
|
|
.indexed = 1,
|
|
};
|
|
|
|
/* LP timer without encoder (counter only) */
|
|
static const struct iio_chan_spec_ext_info stm32_lptim_cnt_ext_info[] = {
|
|
{
|
|
.name = "preset",
|
|
.shared = IIO_SEPARATE,
|
|
.read = stm32_lptim_cnt_get_preset_iio,
|
|
.write = stm32_lptim_cnt_set_preset_iio,
|
|
},
|
|
IIO_ENUM("polarity", IIO_SEPARATE, &stm32_lptim_cnt_polarity_en),
|
|
IIO_ENUM_AVAILABLE("polarity", &stm32_lptim_cnt_polarity_en),
|
|
{}
|
|
};
|
|
|
|
static const struct iio_chan_spec stm32_lptim_cnt_channels = {
|
|
.type = IIO_COUNT,
|
|
.channel = 0,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_ENABLE) |
|
|
BIT(IIO_CHAN_INFO_SCALE),
|
|
.ext_info = stm32_lptim_cnt_ext_info,
|
|
.indexed = 1,
|
|
};
|
|
|
|
/**
|
|
* stm32_lptim_cnt_function - enumerates stm32 LPTimer counter & encoder modes
|
|
* @STM32_LPTIM_COUNTER_INCREASE: up count on IN1 rising, falling or both edges
|
|
* @STM32_LPTIM_ENCODER_BOTH_EDGE: count on both edges (IN1 & IN2 quadrature)
|
|
*/
|
|
enum stm32_lptim_cnt_function {
|
|
STM32_LPTIM_COUNTER_INCREASE,
|
|
STM32_LPTIM_ENCODER_BOTH_EDGE,
|
|
};
|
|
|
|
static enum counter_count_function stm32_lptim_cnt_functions[] = {
|
|
[STM32_LPTIM_COUNTER_INCREASE] = COUNTER_COUNT_FUNCTION_INCREASE,
|
|
[STM32_LPTIM_ENCODER_BOTH_EDGE] = COUNTER_COUNT_FUNCTION_QUADRATURE_X4,
|
|
};
|
|
|
|
enum stm32_lptim_synapse_action {
|
|
STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE,
|
|
STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE,
|
|
STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES,
|
|
STM32_LPTIM_SYNAPSE_ACTION_NONE,
|
|
};
|
|
|
|
static enum counter_synapse_action stm32_lptim_cnt_synapse_actions[] = {
|
|
/* Index must match with stm32_lptim_cnt_polarity[] (priv->polarity) */
|
|
[STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE] = COUNTER_SYNAPSE_ACTION_RISING_EDGE,
|
|
[STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE] = COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
|
|
[STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES] = COUNTER_SYNAPSE_ACTION_BOTH_EDGES,
|
|
[STM32_LPTIM_SYNAPSE_ACTION_NONE] = COUNTER_SYNAPSE_ACTION_NONE,
|
|
};
|
|
|
|
static int stm32_lptim_cnt_read(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
struct counter_count_read_value *val)
|
|
{
|
|
struct stm32_lptim_cnt *const priv = counter->priv;
|
|
u32 cnt;
|
|
int ret;
|
|
|
|
ret = regmap_read(priv->regmap, STM32_LPTIM_CNT, &cnt);
|
|
if (ret)
|
|
return ret;
|
|
|
|
counter_count_read_value_set(val, COUNTER_COUNT_POSITION, &cnt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_lptim_cnt_function_get(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
size_t *function)
|
|
{
|
|
struct stm32_lptim_cnt *const priv = counter->priv;
|
|
|
|
if (!priv->quadrature_mode) {
|
|
*function = STM32_LPTIM_COUNTER_INCREASE;
|
|
return 0;
|
|
}
|
|
|
|
if (priv->polarity == STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES) {
|
|
*function = STM32_LPTIM_ENCODER_BOTH_EDGE;
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int stm32_lptim_cnt_function_set(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
size_t function)
|
|
{
|
|
struct stm32_lptim_cnt *const priv = counter->priv;
|
|
|
|
if (stm32_lptim_is_enabled(priv))
|
|
return -EBUSY;
|
|
|
|
switch (function) {
|
|
case STM32_LPTIM_COUNTER_INCREASE:
|
|
priv->quadrature_mode = 0;
|
|
return 0;
|
|
case STM32_LPTIM_ENCODER_BOTH_EDGE:
|
|
priv->quadrature_mode = 1;
|
|
priv->polarity = STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES;
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static ssize_t stm32_lptim_cnt_enable_read(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
void *private, char *buf)
|
|
{
|
|
struct stm32_lptim_cnt *const priv = counter->priv;
|
|
int ret;
|
|
|
|
ret = stm32_lptim_is_enabled(priv);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return scnprintf(buf, PAGE_SIZE, "%u\n", ret);
|
|
}
|
|
|
|
static ssize_t stm32_lptim_cnt_enable_write(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
void *private,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct stm32_lptim_cnt *const priv = counter->priv;
|
|
bool enable;
|
|
int ret;
|
|
|
|
ret = kstrtobool(buf, &enable);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Check nobody uses the timer, or already disabled/enabled */
|
|
ret = stm32_lptim_is_enabled(priv);
|
|
if ((ret < 0) || (!ret && !enable))
|
|
return ret;
|
|
if (enable && ret)
|
|
return -EBUSY;
|
|
|
|
ret = stm32_lptim_setup(priv, enable);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = stm32_lptim_set_enable_state(priv, enable);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return len;
|
|
}
|
|
|
|
static ssize_t stm32_lptim_cnt_ceiling_read(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
void *private, char *buf)
|
|
{
|
|
struct stm32_lptim_cnt *const priv = counter->priv;
|
|
|
|
return stm32_lptim_cnt_get_ceiling(priv, buf);
|
|
}
|
|
|
|
static ssize_t stm32_lptim_cnt_ceiling_write(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
void *private,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct stm32_lptim_cnt *const priv = counter->priv;
|
|
|
|
return stm32_lptim_cnt_set_ceiling(priv, buf, len);
|
|
}
|
|
|
|
static const struct counter_count_ext stm32_lptim_cnt_ext[] = {
|
|
{
|
|
.name = "enable",
|
|
.read = stm32_lptim_cnt_enable_read,
|
|
.write = stm32_lptim_cnt_enable_write
|
|
},
|
|
{
|
|
.name = "ceiling",
|
|
.read = stm32_lptim_cnt_ceiling_read,
|
|
.write = stm32_lptim_cnt_ceiling_write
|
|
},
|
|
};
|
|
|
|
static int stm32_lptim_cnt_action_get(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
struct counter_synapse *synapse,
|
|
size_t *action)
|
|
{
|
|
struct stm32_lptim_cnt *const priv = counter->priv;
|
|
size_t function;
|
|
int err;
|
|
|
|
err = stm32_lptim_cnt_function_get(counter, count, &function);
|
|
if (err)
|
|
return err;
|
|
|
|
switch (function) {
|
|
case STM32_LPTIM_COUNTER_INCREASE:
|
|
/* LP Timer acts as up-counter on input 1 */
|
|
if (synapse->signal->id == count->synapses[0].signal->id)
|
|
*action = priv->polarity;
|
|
else
|
|
*action = STM32_LPTIM_SYNAPSE_ACTION_NONE;
|
|
return 0;
|
|
case STM32_LPTIM_ENCODER_BOTH_EDGE:
|
|
*action = priv->polarity;
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int stm32_lptim_cnt_action_set(struct counter_device *counter,
|
|
struct counter_count *count,
|
|
struct counter_synapse *synapse,
|
|
size_t action)
|
|
{
|
|
struct stm32_lptim_cnt *const priv = counter->priv;
|
|
size_t function;
|
|
int err;
|
|
|
|
if (stm32_lptim_is_enabled(priv))
|
|
return -EBUSY;
|
|
|
|
err = stm32_lptim_cnt_function_get(counter, count, &function);
|
|
if (err)
|
|
return err;
|
|
|
|
/* only set polarity when in counter mode (on input 1) */
|
|
if (function == STM32_LPTIM_COUNTER_INCREASE
|
|
&& synapse->signal->id == count->synapses[0].signal->id) {
|
|
switch (action) {
|
|
case STM32_LPTIM_SYNAPSE_ACTION_RISING_EDGE:
|
|
case STM32_LPTIM_SYNAPSE_ACTION_FALLING_EDGE:
|
|
case STM32_LPTIM_SYNAPSE_ACTION_BOTH_EDGES:
|
|
priv->polarity = action;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct counter_ops stm32_lptim_cnt_ops = {
|
|
.count_read = stm32_lptim_cnt_read,
|
|
.function_get = stm32_lptim_cnt_function_get,
|
|
.function_set = stm32_lptim_cnt_function_set,
|
|
.action_get = stm32_lptim_cnt_action_get,
|
|
.action_set = stm32_lptim_cnt_action_set,
|
|
};
|
|
|
|
static struct counter_signal stm32_lptim_cnt_signals[] = {
|
|
{
|
|
.id = 0,
|
|
.name = "Channel 1 Quadrature A"
|
|
},
|
|
{
|
|
.id = 1,
|
|
.name = "Channel 1 Quadrature B"
|
|
}
|
|
};
|
|
|
|
static struct counter_synapse stm32_lptim_cnt_synapses[] = {
|
|
{
|
|
.actions_list = stm32_lptim_cnt_synapse_actions,
|
|
.num_actions = ARRAY_SIZE(stm32_lptim_cnt_synapse_actions),
|
|
.signal = &stm32_lptim_cnt_signals[0]
|
|
},
|
|
{
|
|
.actions_list = stm32_lptim_cnt_synapse_actions,
|
|
.num_actions = ARRAY_SIZE(stm32_lptim_cnt_synapse_actions),
|
|
.signal = &stm32_lptim_cnt_signals[1]
|
|
}
|
|
};
|
|
|
|
/* LP timer with encoder */
|
|
static struct counter_count stm32_lptim_enc_counts = {
|
|
.id = 0,
|
|
.name = "LPTimer Count",
|
|
.functions_list = stm32_lptim_cnt_functions,
|
|
.num_functions = ARRAY_SIZE(stm32_lptim_cnt_functions),
|
|
.synapses = stm32_lptim_cnt_synapses,
|
|
.num_synapses = ARRAY_SIZE(stm32_lptim_cnt_synapses),
|
|
.ext = stm32_lptim_cnt_ext,
|
|
.num_ext = ARRAY_SIZE(stm32_lptim_cnt_ext)
|
|
};
|
|
|
|
/* LP timer without encoder (counter only) */
|
|
static struct counter_count stm32_lptim_in1_counts = {
|
|
.id = 0,
|
|
.name = "LPTimer Count",
|
|
.functions_list = stm32_lptim_cnt_functions,
|
|
.num_functions = 1,
|
|
.synapses = stm32_lptim_cnt_synapses,
|
|
.num_synapses = 1,
|
|
.ext = stm32_lptim_cnt_ext,
|
|
.num_ext = ARRAY_SIZE(stm32_lptim_cnt_ext)
|
|
};
|
|
|
|
static int stm32_lptim_cnt_probe(struct platform_device *pdev)
|
|
{
|
|
struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
|
|
struct stm32_lptim_cnt *priv;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
|
|
if (IS_ERR_OR_NULL(ddata))
|
|
return -EINVAL;
|
|
|
|
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
priv = iio_priv(indio_dev);
|
|
priv->dev = &pdev->dev;
|
|
priv->regmap = ddata->regmap;
|
|
priv->clk = ddata->clk;
|
|
priv->ceiling = STM32_LPTIM_MAX_ARR;
|
|
|
|
/* Initialize IIO device */
|
|
indio_dev->name = dev_name(&pdev->dev);
|
|
indio_dev->dev.parent = &pdev->dev;
|
|
indio_dev->dev.of_node = pdev->dev.of_node;
|
|
indio_dev->info = &stm32_lptim_cnt_iio_info;
|
|
if (ddata->has_encoder)
|
|
indio_dev->channels = &stm32_lptim_enc_channels;
|
|
else
|
|
indio_dev->channels = &stm32_lptim_cnt_channels;
|
|
indio_dev->num_channels = 1;
|
|
|
|
/* Initialize Counter device */
|
|
priv->counter.name = dev_name(&pdev->dev);
|
|
priv->counter.parent = &pdev->dev;
|
|
priv->counter.ops = &stm32_lptim_cnt_ops;
|
|
if (ddata->has_encoder) {
|
|
priv->counter.counts = &stm32_lptim_enc_counts;
|
|
priv->counter.num_signals = ARRAY_SIZE(stm32_lptim_cnt_signals);
|
|
} else {
|
|
priv->counter.counts = &stm32_lptim_in1_counts;
|
|
priv->counter.num_signals = 1;
|
|
}
|
|
priv->counter.num_counts = 1;
|
|
priv->counter.signals = stm32_lptim_cnt_signals;
|
|
priv->counter.priv = priv;
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
ret = devm_iio_device_register(&pdev->dev, indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return devm_counter_register(&pdev->dev, &priv->counter);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int stm32_lptim_cnt_suspend(struct device *dev)
|
|
{
|
|
struct stm32_lptim_cnt *priv = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
/* Only take care of enabled counter: don't disturb other MFD child */
|
|
if (priv->enabled) {
|
|
ret = stm32_lptim_setup(priv, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = stm32_lptim_set_enable_state(priv, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Force enable state for later resume */
|
|
priv->enabled = true;
|
|
}
|
|
|
|
return pinctrl_pm_select_sleep_state(dev);
|
|
}
|
|
|
|
static int stm32_lptim_cnt_resume(struct device *dev)
|
|
{
|
|
struct stm32_lptim_cnt *priv = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = pinctrl_pm_select_default_state(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (priv->enabled) {
|
|
priv->enabled = false;
|
|
ret = stm32_lptim_setup(priv, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = stm32_lptim_set_enable_state(priv, 1);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(stm32_lptim_cnt_pm_ops, stm32_lptim_cnt_suspend,
|
|
stm32_lptim_cnt_resume);
|
|
|
|
static const struct of_device_id stm32_lptim_cnt_of_match[] = {
|
|
{ .compatible = "st,stm32-lptimer-counter", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, stm32_lptim_cnt_of_match);
|
|
|
|
static struct platform_driver stm32_lptim_cnt_driver = {
|
|
.probe = stm32_lptim_cnt_probe,
|
|
.driver = {
|
|
.name = "stm32-lptimer-counter",
|
|
.of_match_table = stm32_lptim_cnt_of_match,
|
|
.pm = &stm32_lptim_cnt_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(stm32_lptim_cnt_driver);
|
|
|
|
MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>");
|
|
MODULE_ALIAS("platform:stm32-lptimer-counter");
|
|
MODULE_DESCRIPTION("STMicroelectronics STM32 LPTIM counter driver");
|
|
MODULE_LICENSE("GPL v2");
|