linux_dsm_epyc7002/drivers/ata/pata_falcon.c
Michael Schmitz 5ed0794cde m68k/atari: Convert Falcon IDE drivers to platform drivers
Autoloading of Falcon IDE driver modules requires converting these
drivers to platform drivers.

Add platform device for Falcon IDE interface in Atari platform setup
code. Use this in the pata_falcon driver in place of the simple
platform device set up on the fly.

Convert falconide driver to use the same platform device that is used
by pata_falcon also. (With the introduction of a platform device for
the Atari Falcon IDE interface, the old Falcon IDE driver no longer
loads (resource already claimed by the platform device)).

Tested (as built-in driver) on my Atari Falcon.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://lore.kernel.org/r/1573008449-8226-1-git-send-email-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-11-18 10:18:59 +01:00

197 lines
4.8 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Atari Falcon PATA controller driver
*
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Based on falconide.c:
*
* Created 12 Jul 1997 by Geert Uytterhoeven
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <linux/ata.h>
#include <linux/libata.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <asm/setup.h>
#include <asm/atarihw.h>
#include <asm/atariints.h>
#include <asm/atari_stdma.h>
#include <asm/ide.h>
#define DRV_NAME "pata_falcon"
#define DRV_VERSION "0.1.0"
#define ATA_HD_CONTROL 0x39
static struct scsi_host_template pata_falcon_sht = {
ATA_PIO_SHT(DRV_NAME),
};
static unsigned int pata_falcon_data_xfer(struct ata_queued_cmd *qc,
unsigned char *buf,
unsigned int buflen, int rw)
{
struct ata_device *dev = qc->dev;
struct ata_port *ap = dev->link->ap;
void __iomem *data_addr = ap->ioaddr.data_addr;
unsigned int words = buflen >> 1;
struct scsi_cmnd *cmd = qc->scsicmd;
bool swap = 1;
if (dev->class == ATA_DEV_ATA && cmd && cmd->request &&
!blk_rq_is_passthrough(cmd->request))
swap = 0;
/* Transfer multiple of 2 bytes */
if (rw == READ) {
if (swap)
raw_insw_swapw((u16 *)data_addr, (u16 *)buf, words);
else
raw_insw((u16 *)data_addr, (u16 *)buf, words);
} else {
if (swap)
raw_outsw_swapw((u16 *)data_addr, (u16 *)buf, words);
else
raw_outsw((u16 *)data_addr, (u16 *)buf, words);
}
/* Transfer trailing byte, if any. */
if (unlikely(buflen & 0x01)) {
unsigned char pad[2] = { };
/* Point buf to the tail of buffer */
buf += buflen - 1;
if (rw == READ) {
if (swap)
raw_insw_swapw((u16 *)data_addr, (u16 *)pad, 1);
else
raw_insw((u16 *)data_addr, (u16 *)pad, 1);
*buf = pad[0];
} else {
pad[0] = *buf;
if (swap)
raw_outsw_swapw((u16 *)data_addr, (u16 *)pad, 1);
else
raw_outsw((u16 *)data_addr, (u16 *)pad, 1);
}
words++;
}
return words << 1;
}
/*
* Provide our own set_mode() as we don't want to change anything that has
* already been configured..
*/
static int pata_falcon_set_mode(struct ata_link *link,
struct ata_device **unused)
{
struct ata_device *dev;
ata_for_each_dev(dev, link, ENABLED) {
/* We don't really care */
dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
dev->flags |= ATA_DFLAG_PIO;
ata_dev_info(dev, "configured for PIO\n");
}
return 0;
}
static struct ata_port_operations pata_falcon_ops = {
.inherits = &ata_sff_port_ops,
.sff_data_xfer = pata_falcon_data_xfer,
.cable_detect = ata_cable_unknown,
.set_mode = pata_falcon_set_mode,
};
static int __init pata_falcon_init_one(struct platform_device *pdev)
{
struct resource *res;
struct ata_host *host;
struct ata_port *ap;
void __iomem *base;
dev_info(&pdev->dev, "Atari Falcon PATA controller\n");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
if (!devm_request_mem_region(&pdev->dev, res->start,
resource_size(res), DRV_NAME)) {
dev_err(&pdev->dev, "resources busy\n");
return -EBUSY;
}
/* allocate host */
host = ata_host_alloc(&pdev->dev, 1);
if (!host)
return -ENOMEM;
ap = host->ports[0];
ap->ops = &pata_falcon_ops;
ap->pio_mask = ATA_PIO4;
ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
ap->flags |= ATA_FLAG_PIO_POLLING;
base = (void __iomem *)res->start;
ap->ioaddr.data_addr = base;
ap->ioaddr.error_addr = base + 1 + 1 * 4;
ap->ioaddr.feature_addr = base + 1 + 1 * 4;
ap->ioaddr.nsect_addr = base + 1 + 2 * 4;
ap->ioaddr.lbal_addr = base + 1 + 3 * 4;
ap->ioaddr.lbam_addr = base + 1 + 4 * 4;
ap->ioaddr.lbah_addr = base + 1 + 5 * 4;
ap->ioaddr.device_addr = base + 1 + 6 * 4;
ap->ioaddr.status_addr = base + 1 + 7 * 4;
ap->ioaddr.command_addr = base + 1 + 7 * 4;
ap->ioaddr.altstatus_addr = base + ATA_HD_CONTROL;
ap->ioaddr.ctl_addr = base + ATA_HD_CONTROL;
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", (unsigned long)base,
(unsigned long)base + ATA_HD_CONTROL);
/* activate */
return ata_host_activate(host, 0, NULL, 0, &pata_falcon_sht);
}
static int __exit pata_falcon_remove_one(struct platform_device *pdev)
{
struct ata_host *host = platform_get_drvdata(pdev);
ata_host_detach(host);
return 0;
}
static struct platform_driver pata_falcon_driver = {
.remove = __exit_p(pata_falcon_remove_one),
.driver = {
.name = "atari-falcon-ide",
},
};
module_platform_driver_probe(pata_falcon_driver, pata_falcon_init_one);
MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
MODULE_DESCRIPTION("low-level driver for Atari Falcon PATA");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:atari-falcon-ide");
MODULE_VERSION(DRV_VERSION);