mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
a42efd97f7
AM43xx have the same McASP IP as AM33xx and both platform uses eDMA. Modify the Kconfig so it will be possible to add audio support for AM43xx based boards later. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
59 lines
2.2 KiB
Plaintext
59 lines
2.2 KiB
Plaintext
Texas Instruments McASP controller
|
|
|
|
Required properties:
|
|
- compatible :
|
|
"ti,dm646x-mcasp-audio" : for DM646x platforms
|
|
"ti,da830-mcasp-audio" : for both DA830 & DA850 platforms
|
|
"ti,am33xx-mcasp-audio" : for AM33xx platforms (AM33xx, AM43xx, TI81xx)
|
|
|
|
- reg : Should contain reg specifiers for the entries in the reg-names property.
|
|
- reg-names : Should contain:
|
|
* "mpu" for the main registers (required). For compatibility with
|
|
existing software, it is recommended this is the first entry.
|
|
* "dat" for separate data port register access (optional).
|
|
- op-mode : I2S/DIT ops mode. 0 for I2S mode. 1 for DIT mode used for S/PDIF,
|
|
IEC60958-1, and AES-3 formats.
|
|
- tdm-slots : Slots for TDM operation. Indicates number of channels transmitted
|
|
or received over one serializer.
|
|
- serial-dir : A list of serializer configuration. Each entry is a number
|
|
indication for serializer pin direction.
|
|
(0 - INACTIVE, 1 - TX, 2 - RX)
|
|
- dmas: two element list of DMA controller phandles and DMA request line
|
|
ordered pairs.
|
|
- dma-names: identifier string for each DMA request line in the dmas property.
|
|
These strings correspond 1:1 with the ordered pairs in dmas. The dma
|
|
identifiers must be "rx" and "tx".
|
|
|
|
Optional properties:
|
|
|
|
- ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0
|
|
- tx-num-evt : FIFO levels.
|
|
- rx-num-evt : FIFO levels.
|
|
- sram-size-playback : size of sram to be allocated during playback
|
|
- sram-size-capture : size of sram to be allocated during capture
|
|
- interrupts : Interrupt numbers for McASP, currently not used by the driver
|
|
- interrupt-names : Known interrupt names are "tx" and "rx"
|
|
- pinctrl-0: Should specify pin control group used for this controller.
|
|
- pinctrl-names: Should contain only one value - "default", for more details
|
|
please refer to pinctrl-bindings.txt
|
|
|
|
|
|
Example:
|
|
|
|
mcasp0: mcasp0@1d00000 {
|
|
compatible = "ti,da830-mcasp-audio";
|
|
reg = <0x100000 0x3000>;
|
|
reg-names "mpu";
|
|
interrupts = <82>, <83>;
|
|
interrupts-names = "tx", "rx";
|
|
op-mode = <0>; /* MCASP_IIS_MODE */
|
|
tdm-slots = <2>;
|
|
serial-dir = <
|
|
0 0 0 0 /* 0: INACTIVE, 1: TX, 2: RX */
|
|
0 0 0 0
|
|
0 0 0 1
|
|
2 0 0 0 >;
|
|
tx-num-evt = <1>;
|
|
rx-num-evt = <1>;
|
|
};
|