linux_dsm_epyc7002/arch/arm/boot/dts/armada-375-db.dts
Boris Brezillon 9a3ed1332f ARM: mvebu: define crypto SRAM ranges in armada-375-db.dts
Define the crypto SRAM ranges so that the resources referenced by the
sa-sram node can be properly extracted from the DT.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-09-29 16:19:32 +02:00

207 lines
5.0 KiB
Plaintext

/*
* Device Tree file for Marvell Armada 375 evaluation board
* (DB-88F6720)
*
* Copyright (C) 2014 Marvell
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "armada-375.dtsi"
/ {
model = "Marvell Armada 375 Development Board";
compatible = "marvell,a375-db", "marvell,armada375";
chosen {
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x00000000 0x40000000>; /* 1 GB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
internal-regs {
spi@10600 {
pinctrl-0 = <&spi0_pins>;
pinctrl-names = "default";
/*
* SPI conflicts with NAND, so we disable it
* here, and select NAND as the enabled device
* by default.
*/
status = "disabled";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a13", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
};
i2c@11000 {
status = "okay";
clock-frequency = <100000>;
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
};
i2c@11100 {
status = "okay";
clock-frequency = <100000>;
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
};
serial@12000 {
status = "okay";
};
pinctrl {
sdio_st_pins: sdio-st-pins {
marvell,pins = "mpp44", "mpp45";
marvell,function = "gpio";
};
};
sata@a0000 {
status = "okay";
nr-ports = <2>;
};
nand: nand@d0000 {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
num-cs = <1>;
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
partition@0 {
label = "U-Boot";
reg = <0 0x800000>;
};
partition@800000 {
label = "Linux";
reg = <0x800000 0x800000>;
};
partition@1000000 {
label = "Filesystem";
reg = <0x1000000 0x3f000000>;
};
};
usb@54000 {
status = "okay";
};
usb3@58000 {
status = "okay";
};
mvsdio@d4000 {
pinctrl-0 = <&sdio_pins &sdio_st_pins>;
pinctrl-names = "default";
status = "okay";
cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
mdio {
phy0: ethernet-phy@0 {
reg = <0>;
};
phy3: ethernet-phy@3 {
reg = <3>;
};
};
ethernet@f0000 {
status = "okay";
eth0@c4000 {
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
eth1@c5000 {
status = "okay";
phy = <&phy3>;
phy-mode = "gmii";
};
};
};
pcie-controller {
status = "okay";
/*
* The two PCIe units are accessible through
* standard PCIe slots on the board.
*/
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
};
};