mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 08:05:12 +07:00
a360e54cda
This makes it easier to debug the device-target communication at a very low level. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2576 lines
62 KiB
C
2576 lines
62 KiB
C
/*
|
|
* Copyright (c) 2005-2011 Atheros Communications Inc.
|
|
* Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include "core.h"
|
|
#include "debug.h"
|
|
|
|
#include "targaddrs.h"
|
|
#include "bmi.h"
|
|
|
|
#include "hif.h"
|
|
#include "htc.h"
|
|
|
|
#include "ce.h"
|
|
#include "pci.h"
|
|
|
|
enum ath10k_pci_irq_mode {
|
|
ATH10K_PCI_IRQ_AUTO = 0,
|
|
ATH10K_PCI_IRQ_LEGACY = 1,
|
|
ATH10K_PCI_IRQ_MSI = 2,
|
|
};
|
|
|
|
enum ath10k_pci_reset_mode {
|
|
ATH10K_PCI_RESET_AUTO = 0,
|
|
ATH10K_PCI_RESET_WARM_ONLY = 1,
|
|
};
|
|
|
|
static unsigned int ath10k_pci_irq_mode = ATH10K_PCI_IRQ_AUTO;
|
|
static unsigned int ath10k_pci_reset_mode = ATH10K_PCI_RESET_AUTO;
|
|
|
|
module_param_named(irq_mode, ath10k_pci_irq_mode, uint, 0644);
|
|
MODULE_PARM_DESC(irq_mode, "0: auto, 1: legacy, 2: msi (default: 0)");
|
|
|
|
module_param_named(reset_mode, ath10k_pci_reset_mode, uint, 0644);
|
|
MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default: 0)");
|
|
|
|
/* how long wait to wait for target to initialise, in ms */
|
|
#define ATH10K_PCI_TARGET_WAIT 3000
|
|
#define ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS 3
|
|
|
|
#define QCA988X_2_0_DEVICE_ID (0x003c)
|
|
|
|
static const struct pci_device_id ath10k_pci_id_table[] = {
|
|
{ PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */
|
|
{0}
|
|
};
|
|
|
|
static void ath10k_pci_buffer_cleanup(struct ath10k *ar);
|
|
static int ath10k_pci_cold_reset(struct ath10k *ar);
|
|
static int ath10k_pci_warm_reset(struct ath10k *ar);
|
|
static int ath10k_pci_wait_for_target_init(struct ath10k *ar);
|
|
static int ath10k_pci_init_irq(struct ath10k *ar);
|
|
static int ath10k_pci_deinit_irq(struct ath10k *ar);
|
|
static int ath10k_pci_request_irq(struct ath10k *ar);
|
|
static void ath10k_pci_free_irq(struct ath10k *ar);
|
|
static int ath10k_pci_bmi_wait(struct ath10k_ce_pipe *tx_pipe,
|
|
struct ath10k_ce_pipe *rx_pipe,
|
|
struct bmi_xfer *xfer);
|
|
|
|
static const struct ce_attr host_ce_config_wlan[] = {
|
|
/* CE0: host->target HTC control and raw streams */
|
|
{
|
|
.flags = CE_ATTR_FLAGS,
|
|
.src_nentries = 16,
|
|
.src_sz_max = 256,
|
|
.dest_nentries = 0,
|
|
},
|
|
|
|
/* CE1: target->host HTT + HTC control */
|
|
{
|
|
.flags = CE_ATTR_FLAGS,
|
|
.src_nentries = 0,
|
|
.src_sz_max = 512,
|
|
.dest_nentries = 512,
|
|
},
|
|
|
|
/* CE2: target->host WMI */
|
|
{
|
|
.flags = CE_ATTR_FLAGS,
|
|
.src_nentries = 0,
|
|
.src_sz_max = 2048,
|
|
.dest_nentries = 32,
|
|
},
|
|
|
|
/* CE3: host->target WMI */
|
|
{
|
|
.flags = CE_ATTR_FLAGS,
|
|
.src_nentries = 32,
|
|
.src_sz_max = 2048,
|
|
.dest_nentries = 0,
|
|
},
|
|
|
|
/* CE4: host->target HTT */
|
|
{
|
|
.flags = CE_ATTR_FLAGS | CE_ATTR_DIS_INTR,
|
|
.src_nentries = CE_HTT_H2T_MSG_SRC_NENTRIES,
|
|
.src_sz_max = 256,
|
|
.dest_nentries = 0,
|
|
},
|
|
|
|
/* CE5: unused */
|
|
{
|
|
.flags = CE_ATTR_FLAGS,
|
|
.src_nentries = 0,
|
|
.src_sz_max = 0,
|
|
.dest_nentries = 0,
|
|
},
|
|
|
|
/* CE6: target autonomous hif_memcpy */
|
|
{
|
|
.flags = CE_ATTR_FLAGS,
|
|
.src_nentries = 0,
|
|
.src_sz_max = 0,
|
|
.dest_nentries = 0,
|
|
},
|
|
|
|
/* CE7: ce_diag, the Diagnostic Window */
|
|
{
|
|
.flags = CE_ATTR_FLAGS,
|
|
.src_nentries = 2,
|
|
.src_sz_max = DIAG_TRANSFER_LIMIT,
|
|
.dest_nentries = 2,
|
|
},
|
|
};
|
|
|
|
/* Target firmware's Copy Engine configuration. */
|
|
static const struct ce_pipe_config target_ce_config_wlan[] = {
|
|
/* CE0: host->target HTC control and raw streams */
|
|
{
|
|
.pipenum = __cpu_to_le32(0),
|
|
.pipedir = __cpu_to_le32(PIPEDIR_OUT),
|
|
.nentries = __cpu_to_le32(32),
|
|
.nbytes_max = __cpu_to_le32(256),
|
|
.flags = __cpu_to_le32(CE_ATTR_FLAGS),
|
|
.reserved = __cpu_to_le32(0),
|
|
},
|
|
|
|
/* CE1: target->host HTT + HTC control */
|
|
{
|
|
.pipenum = __cpu_to_le32(1),
|
|
.pipedir = __cpu_to_le32(PIPEDIR_IN),
|
|
.nentries = __cpu_to_le32(32),
|
|
.nbytes_max = __cpu_to_le32(512),
|
|
.flags = __cpu_to_le32(CE_ATTR_FLAGS),
|
|
.reserved = __cpu_to_le32(0),
|
|
},
|
|
|
|
/* CE2: target->host WMI */
|
|
{
|
|
.pipenum = __cpu_to_le32(2),
|
|
.pipedir = __cpu_to_le32(PIPEDIR_IN),
|
|
.nentries = __cpu_to_le32(32),
|
|
.nbytes_max = __cpu_to_le32(2048),
|
|
.flags = __cpu_to_le32(CE_ATTR_FLAGS),
|
|
.reserved = __cpu_to_le32(0),
|
|
},
|
|
|
|
/* CE3: host->target WMI */
|
|
{
|
|
.pipenum = __cpu_to_le32(3),
|
|
.pipedir = __cpu_to_le32(PIPEDIR_OUT),
|
|
.nentries = __cpu_to_le32(32),
|
|
.nbytes_max = __cpu_to_le32(2048),
|
|
.flags = __cpu_to_le32(CE_ATTR_FLAGS),
|
|
.reserved = __cpu_to_le32(0),
|
|
},
|
|
|
|
/* CE4: host->target HTT */
|
|
{
|
|
.pipenum = __cpu_to_le32(4),
|
|
.pipedir = __cpu_to_le32(PIPEDIR_OUT),
|
|
.nentries = __cpu_to_le32(256),
|
|
.nbytes_max = __cpu_to_le32(256),
|
|
.flags = __cpu_to_le32(CE_ATTR_FLAGS),
|
|
.reserved = __cpu_to_le32(0),
|
|
},
|
|
|
|
/* NB: 50% of src nentries, since tx has 2 frags */
|
|
|
|
/* CE5: unused */
|
|
{
|
|
.pipenum = __cpu_to_le32(5),
|
|
.pipedir = __cpu_to_le32(PIPEDIR_OUT),
|
|
.nentries = __cpu_to_le32(32),
|
|
.nbytes_max = __cpu_to_le32(2048),
|
|
.flags = __cpu_to_le32(CE_ATTR_FLAGS),
|
|
.reserved = __cpu_to_le32(0),
|
|
},
|
|
|
|
/* CE6: Reserved for target autonomous hif_memcpy */
|
|
{
|
|
.pipenum = __cpu_to_le32(6),
|
|
.pipedir = __cpu_to_le32(PIPEDIR_INOUT),
|
|
.nentries = __cpu_to_le32(32),
|
|
.nbytes_max = __cpu_to_le32(4096),
|
|
.flags = __cpu_to_le32(CE_ATTR_FLAGS),
|
|
.reserved = __cpu_to_le32(0),
|
|
},
|
|
|
|
/* CE7 used only by Host */
|
|
};
|
|
|
|
/*
|
|
* Map from service/endpoint to Copy Engine.
|
|
* This table is derived from the CE_PCI TABLE, above.
|
|
* It is passed to the Target at startup for use by firmware.
|
|
*/
|
|
static const struct service_to_pipe target_service_to_ce_map_wlan[] = {
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_VO),
|
|
__cpu_to_le32(PIPEDIR_OUT), /* out = UL = host -> target */
|
|
__cpu_to_le32(3),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_VO),
|
|
__cpu_to_le32(PIPEDIR_IN), /* in = DL = target -> host */
|
|
__cpu_to_le32(2),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_BK),
|
|
__cpu_to_le32(PIPEDIR_OUT), /* out = UL = host -> target */
|
|
__cpu_to_le32(3),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_BK),
|
|
__cpu_to_le32(PIPEDIR_IN), /* in = DL = target -> host */
|
|
__cpu_to_le32(2),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_BE),
|
|
__cpu_to_le32(PIPEDIR_OUT), /* out = UL = host -> target */
|
|
__cpu_to_le32(3),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_BE),
|
|
__cpu_to_le32(PIPEDIR_IN), /* in = DL = target -> host */
|
|
__cpu_to_le32(2),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_VI),
|
|
__cpu_to_le32(PIPEDIR_OUT), /* out = UL = host -> target */
|
|
__cpu_to_le32(3),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_VI),
|
|
__cpu_to_le32(PIPEDIR_IN), /* in = DL = target -> host */
|
|
__cpu_to_le32(2),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_CONTROL),
|
|
__cpu_to_le32(PIPEDIR_OUT), /* out = UL = host -> target */
|
|
__cpu_to_le32(3),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_CONTROL),
|
|
__cpu_to_le32(PIPEDIR_IN), /* in = DL = target -> host */
|
|
__cpu_to_le32(2),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_RSVD_CTRL),
|
|
__cpu_to_le32(PIPEDIR_OUT), /* out = UL = host -> target */
|
|
__cpu_to_le32(0),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_RSVD_CTRL),
|
|
__cpu_to_le32(PIPEDIR_IN), /* in = DL = target -> host */
|
|
__cpu_to_le32(1),
|
|
},
|
|
{ /* not used */
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS),
|
|
__cpu_to_le32(PIPEDIR_OUT), /* out = UL = host -> target */
|
|
__cpu_to_le32(0),
|
|
},
|
|
{ /* not used */
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS),
|
|
__cpu_to_le32(PIPEDIR_IN), /* in = DL = target -> host */
|
|
__cpu_to_le32(1),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_HTT_DATA_MSG),
|
|
__cpu_to_le32(PIPEDIR_OUT), /* out = UL = host -> target */
|
|
__cpu_to_le32(4),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_HTT_DATA_MSG),
|
|
__cpu_to_le32(PIPEDIR_IN), /* in = DL = target -> host */
|
|
__cpu_to_le32(1),
|
|
},
|
|
|
|
/* (Additions here) */
|
|
|
|
{ /* must be last */
|
|
__cpu_to_le32(0),
|
|
__cpu_to_le32(0),
|
|
__cpu_to_le32(0),
|
|
},
|
|
};
|
|
|
|
static bool ath10k_pci_irq_pending(struct ath10k *ar)
|
|
{
|
|
u32 cause;
|
|
|
|
/* Check if the shared legacy irq is for us */
|
|
cause = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
|
|
PCIE_INTR_CAUSE_ADDRESS);
|
|
if (cause & (PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static void ath10k_pci_disable_and_clear_legacy_irq(struct ath10k *ar)
|
|
{
|
|
/* IMPORTANT: INTR_CLR register has to be set after
|
|
* INTR_ENABLE is set to 0, otherwise interrupt can not be
|
|
* really cleared. */
|
|
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_ENABLE_ADDRESS,
|
|
0);
|
|
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_CLR_ADDRESS,
|
|
PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL);
|
|
|
|
/* IMPORTANT: this extra read transaction is required to
|
|
* flush the posted write buffer. */
|
|
(void)ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
|
|
PCIE_INTR_ENABLE_ADDRESS);
|
|
}
|
|
|
|
static void ath10k_pci_enable_legacy_irq(struct ath10k *ar)
|
|
{
|
|
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
|
|
PCIE_INTR_ENABLE_ADDRESS,
|
|
PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL);
|
|
|
|
/* IMPORTANT: this extra read transaction is required to
|
|
* flush the posted write buffer. */
|
|
(void)ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
|
|
PCIE_INTR_ENABLE_ADDRESS);
|
|
}
|
|
|
|
static inline const char *ath10k_pci_get_irq_method(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
if (ar_pci->num_msi_intrs > 1)
|
|
return "msi-x";
|
|
|
|
if (ar_pci->num_msi_intrs == 1)
|
|
return "msi";
|
|
|
|
return "legacy";
|
|
}
|
|
|
|
static int __ath10k_pci_rx_post_buf(struct ath10k_pci_pipe *pipe)
|
|
{
|
|
struct ath10k *ar = pipe->hif_ce_state;
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct ath10k_ce_pipe *ce_pipe = pipe->ce_hdl;
|
|
struct sk_buff *skb;
|
|
dma_addr_t paddr;
|
|
int ret;
|
|
|
|
lockdep_assert_held(&ar_pci->ce_lock);
|
|
|
|
skb = dev_alloc_skb(pipe->buf_sz);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
|
|
WARN_ONCE((unsigned long)skb->data & 3, "unaligned skb");
|
|
|
|
paddr = dma_map_single(ar->dev, skb->data,
|
|
skb->len + skb_tailroom(skb),
|
|
DMA_FROM_DEVICE);
|
|
if (unlikely(dma_mapping_error(ar->dev, paddr))) {
|
|
ath10k_warn(ar, "failed to dma map pci rx buf\n");
|
|
dev_kfree_skb_any(skb);
|
|
return -EIO;
|
|
}
|
|
|
|
ATH10K_SKB_CB(skb)->paddr = paddr;
|
|
|
|
ret = __ath10k_ce_rx_post_buf(ce_pipe, skb, paddr);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to post pci rx buf: %d\n", ret);
|
|
dma_unmap_single(ar->dev, paddr, skb->len + skb_tailroom(skb),
|
|
DMA_FROM_DEVICE);
|
|
dev_kfree_skb_any(skb);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __ath10k_pci_rx_post_pipe(struct ath10k_pci_pipe *pipe)
|
|
{
|
|
struct ath10k *ar = pipe->hif_ce_state;
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct ath10k_ce_pipe *ce_pipe = pipe->ce_hdl;
|
|
int ret, num;
|
|
|
|
lockdep_assert_held(&ar_pci->ce_lock);
|
|
|
|
if (pipe->buf_sz == 0)
|
|
return;
|
|
|
|
if (!ce_pipe->dest_ring)
|
|
return;
|
|
|
|
num = __ath10k_ce_rx_num_free_bufs(ce_pipe);
|
|
while (num--) {
|
|
ret = __ath10k_pci_rx_post_buf(pipe);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to post pci rx buf: %d\n", ret);
|
|
mod_timer(&ar_pci->rx_post_retry, jiffies +
|
|
ATH10K_PCI_RX_POST_RETRY_MS);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ath10k_pci_rx_post_pipe(struct ath10k_pci_pipe *pipe)
|
|
{
|
|
struct ath10k *ar = pipe->hif_ce_state;
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
spin_lock_bh(&ar_pci->ce_lock);
|
|
__ath10k_pci_rx_post_pipe(pipe);
|
|
spin_unlock_bh(&ar_pci->ce_lock);
|
|
}
|
|
|
|
static void ath10k_pci_rx_post(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int i;
|
|
|
|
spin_lock_bh(&ar_pci->ce_lock);
|
|
for (i = 0; i < CE_COUNT; i++)
|
|
__ath10k_pci_rx_post_pipe(&ar_pci->pipe_info[i]);
|
|
spin_unlock_bh(&ar_pci->ce_lock);
|
|
}
|
|
|
|
static void ath10k_pci_rx_replenish_retry(unsigned long ptr)
|
|
{
|
|
struct ath10k *ar = (void *)ptr;
|
|
|
|
ath10k_pci_rx_post(ar);
|
|
}
|
|
|
|
/*
|
|
* Diagnostic read/write access is provided for startup/config/debug usage.
|
|
* Caller must guarantee proper alignment, when applicable, and single user
|
|
* at any moment.
|
|
*/
|
|
static int ath10k_pci_diag_read_mem(struct ath10k *ar, u32 address, void *data,
|
|
int nbytes)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int ret = 0;
|
|
u32 buf;
|
|
unsigned int completed_nbytes, orig_nbytes, remaining_bytes;
|
|
unsigned int id;
|
|
unsigned int flags;
|
|
struct ath10k_ce_pipe *ce_diag;
|
|
/* Host buffer address in CE space */
|
|
u32 ce_data;
|
|
dma_addr_t ce_data_base = 0;
|
|
void *data_buf = NULL;
|
|
int i;
|
|
|
|
ce_diag = ar_pci->ce_diag;
|
|
|
|
/*
|
|
* Allocate a temporary bounce buffer to hold caller's data
|
|
* to be DMA'ed from Target. This guarantees
|
|
* 1) 4-byte alignment
|
|
* 2) Buffer in DMA-able space
|
|
*/
|
|
orig_nbytes = nbytes;
|
|
data_buf = (unsigned char *)dma_alloc_coherent(ar->dev,
|
|
orig_nbytes,
|
|
&ce_data_base,
|
|
GFP_ATOMIC);
|
|
|
|
if (!data_buf) {
|
|
ret = -ENOMEM;
|
|
goto done;
|
|
}
|
|
memset(data_buf, 0, orig_nbytes);
|
|
|
|
remaining_bytes = orig_nbytes;
|
|
ce_data = ce_data_base;
|
|
while (remaining_bytes) {
|
|
nbytes = min_t(unsigned int, remaining_bytes,
|
|
DIAG_TRANSFER_LIMIT);
|
|
|
|
ret = ath10k_ce_rx_post_buf(ce_diag, NULL, ce_data);
|
|
if (ret != 0)
|
|
goto done;
|
|
|
|
/* Request CE to send from Target(!) address to Host buffer */
|
|
/*
|
|
* The address supplied by the caller is in the
|
|
* Target CPU virtual address space.
|
|
*
|
|
* In order to use this address with the diagnostic CE,
|
|
* convert it from Target CPU virtual address space
|
|
* to CE address space
|
|
*/
|
|
address = TARG_CPU_SPACE_TO_CE_SPACE(ar, ar_pci->mem,
|
|
address);
|
|
|
|
ret = ath10k_ce_send(ce_diag, NULL, (u32)address, nbytes, 0,
|
|
0);
|
|
if (ret)
|
|
goto done;
|
|
|
|
i = 0;
|
|
while (ath10k_ce_completed_send_next(ce_diag, NULL, &buf,
|
|
&completed_nbytes,
|
|
&id) != 0) {
|
|
mdelay(1);
|
|
if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) {
|
|
ret = -EBUSY;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
if (nbytes != completed_nbytes) {
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
if (buf != (u32)address) {
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
i = 0;
|
|
while (ath10k_ce_completed_recv_next(ce_diag, NULL, &buf,
|
|
&completed_nbytes,
|
|
&id, &flags) != 0) {
|
|
mdelay(1);
|
|
|
|
if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) {
|
|
ret = -EBUSY;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
if (nbytes != completed_nbytes) {
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
if (buf != ce_data) {
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
remaining_bytes -= nbytes;
|
|
address += nbytes;
|
|
ce_data += nbytes;
|
|
}
|
|
|
|
done:
|
|
if (ret == 0)
|
|
memcpy(data, data_buf, orig_nbytes);
|
|
else
|
|
ath10k_warn(ar, "failed to read diag value at 0x%x: %d\n",
|
|
address, ret);
|
|
|
|
if (data_buf)
|
|
dma_free_coherent(ar->dev, orig_nbytes, data_buf,
|
|
ce_data_base);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_pci_diag_read32(struct ath10k *ar, u32 address, u32 *value)
|
|
{
|
|
__le32 val = 0;
|
|
int ret;
|
|
|
|
ret = ath10k_pci_diag_read_mem(ar, address, &val, sizeof(val));
|
|
*value = __le32_to_cpu(val);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __ath10k_pci_diag_read_hi(struct ath10k *ar, void *dest,
|
|
u32 src, u32 len)
|
|
{
|
|
u32 host_addr, addr;
|
|
int ret;
|
|
|
|
host_addr = host_interest_item_address(src);
|
|
|
|
ret = ath10k_pci_diag_read32(ar, host_addr, &addr);
|
|
if (ret != 0) {
|
|
ath10k_warn(ar, "failed to get memcpy hi address for firmware address %d: %d\n",
|
|
src, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_pci_diag_read_mem(ar, addr, dest, len);
|
|
if (ret != 0) {
|
|
ath10k_warn(ar, "failed to memcpy firmware memory from %d (%d B): %d\n",
|
|
addr, len, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define ath10k_pci_diag_read_hi(ar, dest, src, len) \
|
|
__ath10k_pci_diag_read_hi(ar, dest, HI_ITEM(src), len)
|
|
|
|
static int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
|
|
const void *data, int nbytes)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int ret = 0;
|
|
u32 buf;
|
|
unsigned int completed_nbytes, orig_nbytes, remaining_bytes;
|
|
unsigned int id;
|
|
unsigned int flags;
|
|
struct ath10k_ce_pipe *ce_diag;
|
|
void *data_buf = NULL;
|
|
u32 ce_data; /* Host buffer address in CE space */
|
|
dma_addr_t ce_data_base = 0;
|
|
int i;
|
|
|
|
ce_diag = ar_pci->ce_diag;
|
|
|
|
/*
|
|
* Allocate a temporary bounce buffer to hold caller's data
|
|
* to be DMA'ed to Target. This guarantees
|
|
* 1) 4-byte alignment
|
|
* 2) Buffer in DMA-able space
|
|
*/
|
|
orig_nbytes = nbytes;
|
|
data_buf = (unsigned char *)dma_alloc_coherent(ar->dev,
|
|
orig_nbytes,
|
|
&ce_data_base,
|
|
GFP_ATOMIC);
|
|
if (!data_buf) {
|
|
ret = -ENOMEM;
|
|
goto done;
|
|
}
|
|
|
|
/* Copy caller's data to allocated DMA buf */
|
|
memcpy(data_buf, data, orig_nbytes);
|
|
|
|
/*
|
|
* The address supplied by the caller is in the
|
|
* Target CPU virtual address space.
|
|
*
|
|
* In order to use this address with the diagnostic CE,
|
|
* convert it from
|
|
* Target CPU virtual address space
|
|
* to
|
|
* CE address space
|
|
*/
|
|
address = TARG_CPU_SPACE_TO_CE_SPACE(ar, ar_pci->mem, address);
|
|
|
|
remaining_bytes = orig_nbytes;
|
|
ce_data = ce_data_base;
|
|
while (remaining_bytes) {
|
|
/* FIXME: check cast */
|
|
nbytes = min_t(int, remaining_bytes, DIAG_TRANSFER_LIMIT);
|
|
|
|
/* Set up to receive directly into Target(!) address */
|
|
ret = ath10k_ce_rx_post_buf(ce_diag, NULL, address);
|
|
if (ret != 0)
|
|
goto done;
|
|
|
|
/*
|
|
* Request CE to send caller-supplied data that
|
|
* was copied to bounce buffer to Target(!) address.
|
|
*/
|
|
ret = ath10k_ce_send(ce_diag, NULL, (u32)ce_data,
|
|
nbytes, 0, 0);
|
|
if (ret != 0)
|
|
goto done;
|
|
|
|
i = 0;
|
|
while (ath10k_ce_completed_send_next(ce_diag, NULL, &buf,
|
|
&completed_nbytes,
|
|
&id) != 0) {
|
|
mdelay(1);
|
|
|
|
if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) {
|
|
ret = -EBUSY;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
if (nbytes != completed_nbytes) {
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
if (buf != ce_data) {
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
i = 0;
|
|
while (ath10k_ce_completed_recv_next(ce_diag, NULL, &buf,
|
|
&completed_nbytes,
|
|
&id, &flags) != 0) {
|
|
mdelay(1);
|
|
|
|
if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) {
|
|
ret = -EBUSY;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
if (nbytes != completed_nbytes) {
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
if (buf != address) {
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
remaining_bytes -= nbytes;
|
|
address += nbytes;
|
|
ce_data += nbytes;
|
|
}
|
|
|
|
done:
|
|
if (data_buf) {
|
|
dma_free_coherent(ar->dev, orig_nbytes, data_buf,
|
|
ce_data_base);
|
|
}
|
|
|
|
if (ret != 0)
|
|
ath10k_warn(ar, "failed to write diag value at 0x%x: %d\n",
|
|
address, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_pci_diag_write32(struct ath10k *ar, u32 address, u32 value)
|
|
{
|
|
__le32 val = __cpu_to_le32(value);
|
|
|
|
return ath10k_pci_diag_write_mem(ar, address, &val, sizeof(val));
|
|
}
|
|
|
|
static bool ath10k_pci_is_awake(struct ath10k *ar)
|
|
{
|
|
u32 val = ath10k_pci_reg_read32(ar, RTC_STATE_ADDRESS);
|
|
|
|
return RTC_STATE_V_GET(val) == RTC_STATE_V_ON;
|
|
}
|
|
|
|
static int ath10k_pci_wake_wait(struct ath10k *ar)
|
|
{
|
|
int tot_delay = 0;
|
|
int curr_delay = 5;
|
|
|
|
while (tot_delay < PCIE_WAKE_TIMEOUT) {
|
|
if (ath10k_pci_is_awake(ar))
|
|
return 0;
|
|
|
|
udelay(curr_delay);
|
|
tot_delay += curr_delay;
|
|
|
|
if (curr_delay < 50)
|
|
curr_delay += 5;
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int ath10k_pci_wake(struct ath10k *ar)
|
|
{
|
|
ath10k_pci_reg_write32(ar, PCIE_SOC_WAKE_ADDRESS,
|
|
PCIE_SOC_WAKE_V_MASK);
|
|
return ath10k_pci_wake_wait(ar);
|
|
}
|
|
|
|
static void ath10k_pci_sleep(struct ath10k *ar)
|
|
{
|
|
ath10k_pci_reg_write32(ar, PCIE_SOC_WAKE_ADDRESS,
|
|
PCIE_SOC_WAKE_RESET);
|
|
}
|
|
|
|
/* Called by lower (CE) layer when a send to Target completes. */
|
|
static void ath10k_pci_ce_send_done(struct ath10k_ce_pipe *ce_state)
|
|
{
|
|
struct ath10k *ar = ce_state->ar;
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct ath10k_hif_cb *cb = &ar_pci->msg_callbacks_current;
|
|
void *transfer_context;
|
|
u32 ce_data;
|
|
unsigned int nbytes;
|
|
unsigned int transfer_id;
|
|
|
|
while (ath10k_ce_completed_send_next(ce_state, &transfer_context,
|
|
&ce_data, &nbytes,
|
|
&transfer_id) == 0) {
|
|
/* no need to call tx completion for NULL pointers */
|
|
if (transfer_context == NULL)
|
|
continue;
|
|
|
|
cb->tx_completion(ar, transfer_context, transfer_id);
|
|
}
|
|
}
|
|
|
|
/* Called by lower (CE) layer when data is received from the Target. */
|
|
static void ath10k_pci_ce_recv_data(struct ath10k_ce_pipe *ce_state)
|
|
{
|
|
struct ath10k *ar = ce_state->ar;
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct ath10k_pci_pipe *pipe_info = &ar_pci->pipe_info[ce_state->id];
|
|
struct ath10k_hif_cb *cb = &ar_pci->msg_callbacks_current;
|
|
struct sk_buff *skb;
|
|
void *transfer_context;
|
|
u32 ce_data;
|
|
unsigned int nbytes, max_nbytes;
|
|
unsigned int transfer_id;
|
|
unsigned int flags;
|
|
|
|
while (ath10k_ce_completed_recv_next(ce_state, &transfer_context,
|
|
&ce_data, &nbytes, &transfer_id,
|
|
&flags) == 0) {
|
|
skb = transfer_context;
|
|
max_nbytes = skb->len + skb_tailroom(skb);
|
|
dma_unmap_single(ar->dev, ATH10K_SKB_CB(skb)->paddr,
|
|
max_nbytes, DMA_FROM_DEVICE);
|
|
|
|
if (unlikely(max_nbytes < nbytes)) {
|
|
ath10k_warn(ar, "rxed more than expected (nbytes %d, max %d)",
|
|
nbytes, max_nbytes);
|
|
dev_kfree_skb_any(skb);
|
|
continue;
|
|
}
|
|
|
|
skb_put(skb, nbytes);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI, "pci rx ce pipe %d len %d\n",
|
|
ce_state->id, skb->len);
|
|
ath10k_dbg_dump(ar, ATH10K_DBG_PCI_DUMP, NULL, "pci rx: ",
|
|
skb->data, skb->len);
|
|
|
|
cb->rx_completion(ar, skb, pipe_info->pipe_num);
|
|
}
|
|
|
|
ath10k_pci_rx_post_pipe(pipe_info);
|
|
}
|
|
|
|
static int ath10k_pci_hif_tx_sg(struct ath10k *ar, u8 pipe_id,
|
|
struct ath10k_hif_sg_item *items, int n_items)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct ath10k_pci_pipe *pci_pipe = &ar_pci->pipe_info[pipe_id];
|
|
struct ath10k_ce_pipe *ce_pipe = pci_pipe->ce_hdl;
|
|
struct ath10k_ce_ring *src_ring = ce_pipe->src_ring;
|
|
unsigned int nentries_mask;
|
|
unsigned int sw_index;
|
|
unsigned int write_index;
|
|
int err, i = 0;
|
|
|
|
spin_lock_bh(&ar_pci->ce_lock);
|
|
|
|
nentries_mask = src_ring->nentries_mask;
|
|
sw_index = src_ring->sw_index;
|
|
write_index = src_ring->write_index;
|
|
|
|
if (unlikely(CE_RING_DELTA(nentries_mask,
|
|
write_index, sw_index - 1) < n_items)) {
|
|
err = -ENOBUFS;
|
|
goto err;
|
|
}
|
|
|
|
for (i = 0; i < n_items - 1; i++) {
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI,
|
|
"pci tx item %d paddr 0x%08x len %d n_items %d\n",
|
|
i, items[i].paddr, items[i].len, n_items);
|
|
ath10k_dbg_dump(ar, ATH10K_DBG_PCI_DUMP, NULL, "pci tx data: ",
|
|
items[i].vaddr, items[i].len);
|
|
|
|
err = ath10k_ce_send_nolock(ce_pipe,
|
|
items[i].transfer_context,
|
|
items[i].paddr,
|
|
items[i].len,
|
|
items[i].transfer_id,
|
|
CE_SEND_FLAG_GATHER);
|
|
if (err)
|
|
goto err;
|
|
}
|
|
|
|
/* `i` is equal to `n_items -1` after for() */
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI,
|
|
"pci tx item %d paddr 0x%08x len %d n_items %d\n",
|
|
i, items[i].paddr, items[i].len, n_items);
|
|
ath10k_dbg_dump(ar, ATH10K_DBG_PCI_DUMP, NULL, "pci tx data: ",
|
|
items[i].vaddr, items[i].len);
|
|
|
|
err = ath10k_ce_send_nolock(ce_pipe,
|
|
items[i].transfer_context,
|
|
items[i].paddr,
|
|
items[i].len,
|
|
items[i].transfer_id,
|
|
0);
|
|
if (err)
|
|
goto err;
|
|
|
|
spin_unlock_bh(&ar_pci->ce_lock);
|
|
return 0;
|
|
|
|
err:
|
|
for (; i > 0; i--)
|
|
__ath10k_ce_send_revert(ce_pipe);
|
|
|
|
spin_unlock_bh(&ar_pci->ce_lock);
|
|
return err;
|
|
}
|
|
|
|
static u16 ath10k_pci_hif_get_free_queue_number(struct ath10k *ar, u8 pipe)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI, "pci hif get free queue number\n");
|
|
|
|
return ath10k_ce_num_free_src_entries(ar_pci->pipe_info[pipe].ce_hdl);
|
|
}
|
|
|
|
static void ath10k_pci_dump_registers(struct ath10k *ar,
|
|
struct ath10k_fw_crash_data *crash_data)
|
|
{
|
|
__le32 reg_dump_values[REG_DUMP_COUNT_QCA988X] = {};
|
|
int i, ret;
|
|
|
|
lockdep_assert_held(&ar->data_lock);
|
|
|
|
ret = ath10k_pci_diag_read_hi(ar, ®_dump_values[0],
|
|
hi_failure_state,
|
|
REG_DUMP_COUNT_QCA988X * sizeof(__le32));
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to read firmware dump area: %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
BUILD_BUG_ON(REG_DUMP_COUNT_QCA988X % 4);
|
|
|
|
ath10k_err(ar, "firmware register dump:\n");
|
|
for (i = 0; i < REG_DUMP_COUNT_QCA988X; i += 4)
|
|
ath10k_err(ar, "[%02d]: 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
i,
|
|
__le32_to_cpu(reg_dump_values[i]),
|
|
__le32_to_cpu(reg_dump_values[i + 1]),
|
|
__le32_to_cpu(reg_dump_values[i + 2]),
|
|
__le32_to_cpu(reg_dump_values[i + 3]));
|
|
|
|
if (!crash_data)
|
|
return;
|
|
|
|
for (i = 0; i < REG_DUMP_COUNT_QCA988X; i++)
|
|
crash_data->registers[i] = reg_dump_values[i];
|
|
}
|
|
|
|
static void ath10k_pci_fw_crashed_dump(struct ath10k *ar)
|
|
{
|
|
struct ath10k_fw_crash_data *crash_data;
|
|
char uuid[50];
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
|
|
crash_data = ath10k_debug_get_new_fw_crash_data(ar);
|
|
|
|
if (crash_data)
|
|
scnprintf(uuid, sizeof(uuid), "%pUl", &crash_data->uuid);
|
|
else
|
|
scnprintf(uuid, sizeof(uuid), "n/a");
|
|
|
|
ath10k_err(ar, "firmware crashed! (uuid %s)\n", uuid);
|
|
ath10k_print_driver_info(ar);
|
|
ath10k_pci_dump_registers(ar, crash_data);
|
|
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
queue_work(ar->workqueue, &ar->restart_work);
|
|
}
|
|
|
|
static void ath10k_pci_hif_send_complete_check(struct ath10k *ar, u8 pipe,
|
|
int force)
|
|
{
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI, "pci hif send complete check\n");
|
|
|
|
if (!force) {
|
|
int resources;
|
|
/*
|
|
* Decide whether to actually poll for completions, or just
|
|
* wait for a later chance.
|
|
* If there seem to be plenty of resources left, then just wait
|
|
* since checking involves reading a CE register, which is a
|
|
* relatively expensive operation.
|
|
*/
|
|
resources = ath10k_pci_hif_get_free_queue_number(ar, pipe);
|
|
|
|
/*
|
|
* If at least 50% of the total resources are still available,
|
|
* don't bother checking again yet.
|
|
*/
|
|
if (resources > (host_ce_config_wlan[pipe].src_nentries >> 1))
|
|
return;
|
|
}
|
|
ath10k_ce_per_engine_service(ar, pipe);
|
|
}
|
|
|
|
static void ath10k_pci_hif_set_callbacks(struct ath10k *ar,
|
|
struct ath10k_hif_cb *callbacks)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI, "pci hif set callbacks\n");
|
|
|
|
memcpy(&ar_pci->msg_callbacks_current, callbacks,
|
|
sizeof(ar_pci->msg_callbacks_current));
|
|
}
|
|
|
|
static void ath10k_pci_kill_tasklet(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int i;
|
|
|
|
tasklet_kill(&ar_pci->intr_tq);
|
|
tasklet_kill(&ar_pci->msi_fw_err);
|
|
|
|
for (i = 0; i < CE_COUNT; i++)
|
|
tasklet_kill(&ar_pci->pipe_info[i].intr);
|
|
|
|
del_timer_sync(&ar_pci->rx_post_retry);
|
|
}
|
|
|
|
static int ath10k_pci_hif_map_service_to_pipe(struct ath10k *ar,
|
|
u16 service_id, u8 *ul_pipe,
|
|
u8 *dl_pipe, int *ul_is_polled,
|
|
int *dl_is_polled)
|
|
{
|
|
const struct service_to_pipe *entry;
|
|
bool ul_set = false, dl_set = false;
|
|
int i;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI, "pci hif map service\n");
|
|
|
|
/* polling for received messages not supported */
|
|
*dl_is_polled = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(target_service_to_ce_map_wlan); i++) {
|
|
entry = &target_service_to_ce_map_wlan[i];
|
|
|
|
if (__le32_to_cpu(entry->service_id) != service_id)
|
|
continue;
|
|
|
|
switch (__le32_to_cpu(entry->pipedir)) {
|
|
case PIPEDIR_NONE:
|
|
break;
|
|
case PIPEDIR_IN:
|
|
WARN_ON(dl_set);
|
|
*dl_pipe = __le32_to_cpu(entry->pipenum);
|
|
dl_set = true;
|
|
break;
|
|
case PIPEDIR_OUT:
|
|
WARN_ON(ul_set);
|
|
*ul_pipe = __le32_to_cpu(entry->pipenum);
|
|
ul_set = true;
|
|
break;
|
|
case PIPEDIR_INOUT:
|
|
WARN_ON(dl_set);
|
|
WARN_ON(ul_set);
|
|
*dl_pipe = __le32_to_cpu(entry->pipenum);
|
|
*ul_pipe = __le32_to_cpu(entry->pipenum);
|
|
dl_set = true;
|
|
ul_set = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (WARN_ON(!ul_set || !dl_set))
|
|
return -ENOENT;
|
|
|
|
*ul_is_polled =
|
|
(host_ce_config_wlan[*ul_pipe].flags & CE_ATTR_DIS_INTR) != 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ath10k_pci_hif_get_default_pipe(struct ath10k *ar,
|
|
u8 *ul_pipe, u8 *dl_pipe)
|
|
{
|
|
int ul_is_polled, dl_is_polled;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI, "pci hif get default pipe\n");
|
|
|
|
(void)ath10k_pci_hif_map_service_to_pipe(ar,
|
|
ATH10K_HTC_SVC_ID_RSVD_CTRL,
|
|
ul_pipe,
|
|
dl_pipe,
|
|
&ul_is_polled,
|
|
&dl_is_polled);
|
|
}
|
|
|
|
static void ath10k_pci_irq_disable(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int i;
|
|
|
|
ath10k_ce_disable_interrupts(ar);
|
|
ath10k_pci_disable_and_clear_legacy_irq(ar);
|
|
/* FIXME: How to mask all MSI interrupts? */
|
|
|
|
for (i = 0; i < max(1, ar_pci->num_msi_intrs); i++)
|
|
synchronize_irq(ar_pci->pdev->irq + i);
|
|
}
|
|
|
|
static void ath10k_pci_irq_enable(struct ath10k *ar)
|
|
{
|
|
ath10k_ce_enable_interrupts(ar);
|
|
ath10k_pci_enable_legacy_irq(ar);
|
|
/* FIXME: How to unmask all MSI interrupts? */
|
|
}
|
|
|
|
static int ath10k_pci_hif_start(struct ath10k *ar)
|
|
{
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif start\n");
|
|
|
|
ath10k_pci_irq_enable(ar);
|
|
ath10k_pci_rx_post(ar);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ath10k_pci_rx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info)
|
|
{
|
|
struct ath10k *ar;
|
|
struct ath10k_pci *ar_pci;
|
|
struct ath10k_ce_pipe *ce_hdl;
|
|
u32 buf_sz;
|
|
struct sk_buff *netbuf;
|
|
u32 ce_data;
|
|
|
|
buf_sz = pipe_info->buf_sz;
|
|
|
|
/* Unused Copy Engine */
|
|
if (buf_sz == 0)
|
|
return;
|
|
|
|
ar = pipe_info->hif_ce_state;
|
|
ar_pci = ath10k_pci_priv(ar);
|
|
ce_hdl = pipe_info->ce_hdl;
|
|
|
|
while (ath10k_ce_revoke_recv_next(ce_hdl, (void **)&netbuf,
|
|
&ce_data) == 0) {
|
|
dma_unmap_single(ar->dev, ATH10K_SKB_CB(netbuf)->paddr,
|
|
netbuf->len + skb_tailroom(netbuf),
|
|
DMA_FROM_DEVICE);
|
|
dev_kfree_skb_any(netbuf);
|
|
}
|
|
}
|
|
|
|
static void ath10k_pci_tx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info)
|
|
{
|
|
struct ath10k *ar;
|
|
struct ath10k_pci *ar_pci;
|
|
struct ath10k_ce_pipe *ce_hdl;
|
|
struct sk_buff *netbuf;
|
|
u32 ce_data;
|
|
unsigned int nbytes;
|
|
unsigned int id;
|
|
u32 buf_sz;
|
|
|
|
buf_sz = pipe_info->buf_sz;
|
|
|
|
/* Unused Copy Engine */
|
|
if (buf_sz == 0)
|
|
return;
|
|
|
|
ar = pipe_info->hif_ce_state;
|
|
ar_pci = ath10k_pci_priv(ar);
|
|
ce_hdl = pipe_info->ce_hdl;
|
|
|
|
while (ath10k_ce_cancel_send_next(ce_hdl, (void **)&netbuf,
|
|
&ce_data, &nbytes, &id) == 0) {
|
|
/* no need to call tx completion for NULL pointers */
|
|
if (!netbuf)
|
|
continue;
|
|
|
|
ar_pci->msg_callbacks_current.tx_completion(ar,
|
|
netbuf,
|
|
id);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Cleanup residual buffers for device shutdown:
|
|
* buffers that were enqueued for receive
|
|
* buffers that were to be sent
|
|
* Note: Buffers that had completed but which were
|
|
* not yet processed are on a completion queue. They
|
|
* are handled when the completion thread shuts down.
|
|
*/
|
|
static void ath10k_pci_buffer_cleanup(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int pipe_num;
|
|
|
|
for (pipe_num = 0; pipe_num < CE_COUNT; pipe_num++) {
|
|
struct ath10k_pci_pipe *pipe_info;
|
|
|
|
pipe_info = &ar_pci->pipe_info[pipe_num];
|
|
ath10k_pci_rx_pipe_cleanup(pipe_info);
|
|
ath10k_pci_tx_pipe_cleanup(pipe_info);
|
|
}
|
|
}
|
|
|
|
static void ath10k_pci_ce_deinit(struct ath10k *ar)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < CE_COUNT; i++)
|
|
ath10k_ce_deinit_pipe(ar, i);
|
|
}
|
|
|
|
static void ath10k_pci_flush(struct ath10k *ar)
|
|
{
|
|
ath10k_pci_kill_tasklet(ar);
|
|
ath10k_pci_buffer_cleanup(ar);
|
|
}
|
|
|
|
static void ath10k_pci_hif_stop(struct ath10k *ar)
|
|
{
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif stop\n");
|
|
|
|
/* Most likely the device has HTT Rx ring configured. The only way to
|
|
* prevent the device from accessing (and possible corrupting) host
|
|
* memory is to reset the chip now.
|
|
*
|
|
* There's also no known way of masking MSI interrupts on the device.
|
|
* For ranged MSI the CE-related interrupts can be masked. However
|
|
* regardless how many MSI interrupts are assigned the first one
|
|
* is always used for firmware indications (crashes) and cannot be
|
|
* masked. To prevent the device from asserting the interrupt reset it
|
|
* before proceeding with cleanup.
|
|
*/
|
|
ath10k_pci_warm_reset(ar);
|
|
|
|
ath10k_pci_irq_disable(ar);
|
|
ath10k_pci_flush(ar);
|
|
}
|
|
|
|
static int ath10k_pci_hif_exchange_bmi_msg(struct ath10k *ar,
|
|
void *req, u32 req_len,
|
|
void *resp, u32 *resp_len)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct ath10k_pci_pipe *pci_tx = &ar_pci->pipe_info[BMI_CE_NUM_TO_TARG];
|
|
struct ath10k_pci_pipe *pci_rx = &ar_pci->pipe_info[BMI_CE_NUM_TO_HOST];
|
|
struct ath10k_ce_pipe *ce_tx = pci_tx->ce_hdl;
|
|
struct ath10k_ce_pipe *ce_rx = pci_rx->ce_hdl;
|
|
dma_addr_t req_paddr = 0;
|
|
dma_addr_t resp_paddr = 0;
|
|
struct bmi_xfer xfer = {};
|
|
void *treq, *tresp = NULL;
|
|
int ret = 0;
|
|
|
|
might_sleep();
|
|
|
|
if (resp && !resp_len)
|
|
return -EINVAL;
|
|
|
|
if (resp && resp_len && *resp_len == 0)
|
|
return -EINVAL;
|
|
|
|
treq = kmemdup(req, req_len, GFP_KERNEL);
|
|
if (!treq)
|
|
return -ENOMEM;
|
|
|
|
req_paddr = dma_map_single(ar->dev, treq, req_len, DMA_TO_DEVICE);
|
|
ret = dma_mapping_error(ar->dev, req_paddr);
|
|
if (ret)
|
|
goto err_dma;
|
|
|
|
if (resp && resp_len) {
|
|
tresp = kzalloc(*resp_len, GFP_KERNEL);
|
|
if (!tresp) {
|
|
ret = -ENOMEM;
|
|
goto err_req;
|
|
}
|
|
|
|
resp_paddr = dma_map_single(ar->dev, tresp, *resp_len,
|
|
DMA_FROM_DEVICE);
|
|
ret = dma_mapping_error(ar->dev, resp_paddr);
|
|
if (ret)
|
|
goto err_req;
|
|
|
|
xfer.wait_for_resp = true;
|
|
xfer.resp_len = 0;
|
|
|
|
ath10k_ce_rx_post_buf(ce_rx, &xfer, resp_paddr);
|
|
}
|
|
|
|
ret = ath10k_ce_send(ce_tx, &xfer, req_paddr, req_len, -1, 0);
|
|
if (ret)
|
|
goto err_resp;
|
|
|
|
ret = ath10k_pci_bmi_wait(ce_tx, ce_rx, &xfer);
|
|
if (ret) {
|
|
u32 unused_buffer;
|
|
unsigned int unused_nbytes;
|
|
unsigned int unused_id;
|
|
|
|
ath10k_ce_cancel_send_next(ce_tx, NULL, &unused_buffer,
|
|
&unused_nbytes, &unused_id);
|
|
} else {
|
|
/* non-zero means we did not time out */
|
|
ret = 0;
|
|
}
|
|
|
|
err_resp:
|
|
if (resp) {
|
|
u32 unused_buffer;
|
|
|
|
ath10k_ce_revoke_recv_next(ce_rx, NULL, &unused_buffer);
|
|
dma_unmap_single(ar->dev, resp_paddr,
|
|
*resp_len, DMA_FROM_DEVICE);
|
|
}
|
|
err_req:
|
|
dma_unmap_single(ar->dev, req_paddr, req_len, DMA_TO_DEVICE);
|
|
|
|
if (ret == 0 && resp_len) {
|
|
*resp_len = min(*resp_len, xfer.resp_len);
|
|
memcpy(resp, tresp, xfer.resp_len);
|
|
}
|
|
err_dma:
|
|
kfree(treq);
|
|
kfree(tresp);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ath10k_pci_bmi_send_done(struct ath10k_ce_pipe *ce_state)
|
|
{
|
|
struct bmi_xfer *xfer;
|
|
u32 ce_data;
|
|
unsigned int nbytes;
|
|
unsigned int transfer_id;
|
|
|
|
if (ath10k_ce_completed_send_next(ce_state, (void **)&xfer, &ce_data,
|
|
&nbytes, &transfer_id))
|
|
return;
|
|
|
|
xfer->tx_done = true;
|
|
}
|
|
|
|
static void ath10k_pci_bmi_recv_data(struct ath10k_ce_pipe *ce_state)
|
|
{
|
|
struct ath10k *ar = ce_state->ar;
|
|
struct bmi_xfer *xfer;
|
|
u32 ce_data;
|
|
unsigned int nbytes;
|
|
unsigned int transfer_id;
|
|
unsigned int flags;
|
|
|
|
if (ath10k_ce_completed_recv_next(ce_state, (void **)&xfer, &ce_data,
|
|
&nbytes, &transfer_id, &flags))
|
|
return;
|
|
|
|
if (!xfer->wait_for_resp) {
|
|
ath10k_warn(ar, "unexpected: BMI data received; ignoring\n");
|
|
return;
|
|
}
|
|
|
|
xfer->resp_len = nbytes;
|
|
xfer->rx_done = true;
|
|
}
|
|
|
|
static int ath10k_pci_bmi_wait(struct ath10k_ce_pipe *tx_pipe,
|
|
struct ath10k_ce_pipe *rx_pipe,
|
|
struct bmi_xfer *xfer)
|
|
{
|
|
unsigned long timeout = jiffies + BMI_COMMUNICATION_TIMEOUT_HZ;
|
|
|
|
while (time_before_eq(jiffies, timeout)) {
|
|
ath10k_pci_bmi_send_done(tx_pipe);
|
|
ath10k_pci_bmi_recv_data(rx_pipe);
|
|
|
|
if (xfer->tx_done && (xfer->rx_done == xfer->wait_for_resp))
|
|
return 0;
|
|
|
|
schedule();
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/*
|
|
* Send an interrupt to the device to wake up the Target CPU
|
|
* so it has an opportunity to notice any changed state.
|
|
*/
|
|
static int ath10k_pci_wake_target_cpu(struct ath10k *ar)
|
|
{
|
|
u32 addr, val;
|
|
|
|
addr = SOC_CORE_BASE_ADDRESS | CORE_CTRL_ADDRESS;
|
|
val = ath10k_pci_read32(ar, addr);
|
|
val |= CORE_CTRL_CPU_INTR_MASK;
|
|
ath10k_pci_write32(ar, addr, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_init_config(struct ath10k *ar)
|
|
{
|
|
u32 interconnect_targ_addr;
|
|
u32 pcie_state_targ_addr = 0;
|
|
u32 pipe_cfg_targ_addr = 0;
|
|
u32 svc_to_pipe_map = 0;
|
|
u32 pcie_config_flags = 0;
|
|
u32 ealloc_value;
|
|
u32 ealloc_targ_addr;
|
|
u32 flag2_value;
|
|
u32 flag2_targ_addr;
|
|
int ret = 0;
|
|
|
|
/* Download to Target the CE Config and the service-to-CE map */
|
|
interconnect_targ_addr =
|
|
host_interest_item_address(HI_ITEM(hi_interconnect_state));
|
|
|
|
/* Supply Target-side CE configuration */
|
|
ret = ath10k_pci_diag_read32(ar, interconnect_targ_addr,
|
|
&pcie_state_targ_addr);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to get pcie state addr: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (pcie_state_targ_addr == 0) {
|
|
ret = -EIO;
|
|
ath10k_err(ar, "Invalid pcie state addr\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_pci_diag_read32(ar, (pcie_state_targ_addr +
|
|
offsetof(struct pcie_state,
|
|
pipe_cfg_addr)),
|
|
&pipe_cfg_targ_addr);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to get pipe cfg addr: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (pipe_cfg_targ_addr == 0) {
|
|
ret = -EIO;
|
|
ath10k_err(ar, "Invalid pipe cfg addr\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_pci_diag_write_mem(ar, pipe_cfg_targ_addr,
|
|
target_ce_config_wlan,
|
|
sizeof(target_ce_config_wlan));
|
|
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to write pipe cfg: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_pci_diag_read32(ar, (pcie_state_targ_addr +
|
|
offsetof(struct pcie_state,
|
|
svc_to_pipe_map)),
|
|
&svc_to_pipe_map);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to get svc/pipe map: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (svc_to_pipe_map == 0) {
|
|
ret = -EIO;
|
|
ath10k_err(ar, "Invalid svc_to_pipe map\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_pci_diag_write_mem(ar, svc_to_pipe_map,
|
|
target_service_to_ce_map_wlan,
|
|
sizeof(target_service_to_ce_map_wlan));
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to write svc/pipe map: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_pci_diag_read32(ar, (pcie_state_targ_addr +
|
|
offsetof(struct pcie_state,
|
|
config_flags)),
|
|
&pcie_config_flags);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to get pcie config_flags: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
pcie_config_flags &= ~PCIE_CONFIG_FLAG_ENABLE_L1;
|
|
|
|
ret = ath10k_pci_diag_write32(ar, (pcie_state_targ_addr +
|
|
offsetof(struct pcie_state,
|
|
config_flags)),
|
|
pcie_config_flags);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to write pcie config_flags: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* configure early allocation */
|
|
ealloc_targ_addr = host_interest_item_address(HI_ITEM(hi_early_alloc));
|
|
|
|
ret = ath10k_pci_diag_read32(ar, ealloc_targ_addr, &ealloc_value);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Faile to get early alloc val: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* first bank is switched to IRAM */
|
|
ealloc_value |= ((HI_EARLY_ALLOC_MAGIC << HI_EARLY_ALLOC_MAGIC_SHIFT) &
|
|
HI_EARLY_ALLOC_MAGIC_MASK);
|
|
ealloc_value |= ((1 << HI_EARLY_ALLOC_IRAM_BANKS_SHIFT) &
|
|
HI_EARLY_ALLOC_IRAM_BANKS_MASK);
|
|
|
|
ret = ath10k_pci_diag_write32(ar, ealloc_targ_addr, ealloc_value);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to set early alloc val: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Tell Target to proceed with initialization */
|
|
flag2_targ_addr = host_interest_item_address(HI_ITEM(hi_option_flag2));
|
|
|
|
ret = ath10k_pci_diag_read32(ar, flag2_targ_addr, &flag2_value);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to get option val: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
flag2_value |= HI_OPTION_EARLY_CFG_DONE;
|
|
|
|
ret = ath10k_pci_diag_write32(ar, flag2_targ_addr, flag2_value);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to set option val: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_alloc_ce(struct ath10k *ar)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < CE_COUNT; i++) {
|
|
ret = ath10k_ce_alloc_pipe(ar, i, &host_ce_config_wlan[i]);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to allocate copy engine pipe %d: %d\n",
|
|
i, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ath10k_pci_free_ce(struct ath10k *ar)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < CE_COUNT; i++)
|
|
ath10k_ce_free_pipe(ar, i);
|
|
}
|
|
|
|
static int ath10k_pci_ce_init(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct ath10k_pci_pipe *pipe_info;
|
|
const struct ce_attr *attr;
|
|
int pipe_num, ret;
|
|
|
|
for (pipe_num = 0; pipe_num < CE_COUNT; pipe_num++) {
|
|
pipe_info = &ar_pci->pipe_info[pipe_num];
|
|
pipe_info->ce_hdl = &ar_pci->ce_states[pipe_num];
|
|
pipe_info->pipe_num = pipe_num;
|
|
pipe_info->hif_ce_state = ar;
|
|
attr = &host_ce_config_wlan[pipe_num];
|
|
|
|
ret = ath10k_ce_init_pipe(ar, pipe_num, attr,
|
|
ath10k_pci_ce_send_done,
|
|
ath10k_pci_ce_recv_data);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to initialize copy engine pipe %d: %d\n",
|
|
pipe_num, ret);
|
|
return ret;
|
|
}
|
|
|
|
if (pipe_num == CE_COUNT - 1) {
|
|
/*
|
|
* Reserve the ultimate CE for
|
|
* diagnostic Window support
|
|
*/
|
|
ar_pci->ce_diag = pipe_info->ce_hdl;
|
|
continue;
|
|
}
|
|
|
|
pipe_info->buf_sz = (size_t)(attr->src_sz_max);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool ath10k_pci_has_fw_crashed(struct ath10k *ar)
|
|
{
|
|
return ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS) &
|
|
FW_IND_EVENT_PENDING;
|
|
}
|
|
|
|
static void ath10k_pci_fw_crashed_clear(struct ath10k *ar)
|
|
{
|
|
u32 val;
|
|
|
|
val = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
|
|
val &= ~FW_IND_EVENT_PENDING;
|
|
ath10k_pci_write32(ar, FW_INDICATOR_ADDRESS, val);
|
|
}
|
|
|
|
/* this function effectively clears target memory controller assert line */
|
|
static void ath10k_pci_warm_reset_si0(struct ath10k *ar)
|
|
{
|
|
u32 val;
|
|
|
|
val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS);
|
|
ath10k_pci_soc_write32(ar, SOC_RESET_CONTROL_ADDRESS,
|
|
val | SOC_RESET_CONTROL_SI0_RST_MASK);
|
|
val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS);
|
|
|
|
msleep(10);
|
|
|
|
val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS);
|
|
ath10k_pci_soc_write32(ar, SOC_RESET_CONTROL_ADDRESS,
|
|
val & ~SOC_RESET_CONTROL_SI0_RST_MASK);
|
|
val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS);
|
|
|
|
msleep(10);
|
|
}
|
|
|
|
static int ath10k_pci_warm_reset(struct ath10k *ar)
|
|
{
|
|
u32 val;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot warm reset\n");
|
|
|
|
/* debug */
|
|
val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
|
|
PCIE_INTR_CAUSE_ADDRESS);
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot host cpu intr cause: 0x%08x\n",
|
|
val);
|
|
|
|
val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
|
|
CPU_INTR_ADDRESS);
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot target cpu intr cause: 0x%08x\n",
|
|
val);
|
|
|
|
/* disable pending irqs */
|
|
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
|
|
PCIE_INTR_ENABLE_ADDRESS, 0);
|
|
|
|
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
|
|
PCIE_INTR_CLR_ADDRESS, ~0);
|
|
|
|
msleep(100);
|
|
|
|
/* clear fw indicator */
|
|
ath10k_pci_write32(ar, FW_INDICATOR_ADDRESS, 0);
|
|
|
|
/* clear target LF timer interrupts */
|
|
val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
|
|
SOC_LF_TIMER_CONTROL0_ADDRESS);
|
|
ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS +
|
|
SOC_LF_TIMER_CONTROL0_ADDRESS,
|
|
val & ~SOC_LF_TIMER_CONTROL0_ENABLE_MASK);
|
|
|
|
/* reset CE */
|
|
val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
|
|
SOC_RESET_CONTROL_ADDRESS);
|
|
ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS,
|
|
val | SOC_RESET_CONTROL_CE_RST_MASK);
|
|
val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
|
|
SOC_RESET_CONTROL_ADDRESS);
|
|
msleep(10);
|
|
|
|
/* unreset CE */
|
|
ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS,
|
|
val & ~SOC_RESET_CONTROL_CE_RST_MASK);
|
|
val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
|
|
SOC_RESET_CONTROL_ADDRESS);
|
|
msleep(10);
|
|
|
|
ath10k_pci_warm_reset_si0(ar);
|
|
|
|
/* debug */
|
|
val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
|
|
PCIE_INTR_CAUSE_ADDRESS);
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot host cpu intr cause: 0x%08x\n",
|
|
val);
|
|
|
|
val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
|
|
CPU_INTR_ADDRESS);
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot target cpu intr cause: 0x%08x\n",
|
|
val);
|
|
|
|
/* CPU warm reset */
|
|
val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
|
|
SOC_RESET_CONTROL_ADDRESS);
|
|
ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS,
|
|
val | SOC_RESET_CONTROL_CPU_WARM_RST_MASK);
|
|
|
|
val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
|
|
SOC_RESET_CONTROL_ADDRESS);
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot target reset state: 0x%08x\n",
|
|
val);
|
|
|
|
msleep(100);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot warm reset complete\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __ath10k_pci_hif_power_up(struct ath10k *ar, bool cold_reset)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* Bring the target up cleanly.
|
|
*
|
|
* The target may be in an undefined state with an AUX-powered Target
|
|
* and a Host in WoW mode. If the Host crashes, loses power, or is
|
|
* restarted (without unloading the driver) then the Target is left
|
|
* (aux) powered and running. On a subsequent driver load, the Target
|
|
* is in an unexpected state. We try to catch that here in order to
|
|
* reset the Target and retry the probe.
|
|
*/
|
|
if (cold_reset)
|
|
ret = ath10k_pci_cold_reset(ar);
|
|
else
|
|
ret = ath10k_pci_warm_reset(ar);
|
|
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to reset target: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = ath10k_pci_ce_init(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to initialize CE: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = ath10k_pci_wait_for_target_init(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to wait for target to init: %d\n", ret);
|
|
goto err_ce;
|
|
}
|
|
|
|
ret = ath10k_pci_init_config(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to setup init config: %d\n", ret);
|
|
goto err_ce;
|
|
}
|
|
|
|
ret = ath10k_pci_wake_target_cpu(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "could not wake up target CPU: %d\n", ret);
|
|
goto err_ce;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_ce:
|
|
ath10k_pci_ce_deinit(ar);
|
|
ath10k_pci_warm_reset(ar);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_pci_hif_power_up_warm(struct ath10k *ar)
|
|
{
|
|
int i, ret;
|
|
|
|
/*
|
|
* Sometime warm reset succeeds after retries.
|
|
*
|
|
* FIXME: It might be possible to tune ath10k_pci_warm_reset() to work
|
|
* at first try.
|
|
*/
|
|
for (i = 0; i < ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS; i++) {
|
|
ret = __ath10k_pci_hif_power_up(ar, false);
|
|
if (ret == 0)
|
|
break;
|
|
|
|
ath10k_warn(ar, "failed to warm reset (attempt %d out of %d): %d\n",
|
|
i + 1, ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS, ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_pci_hif_power_up(struct ath10k *ar)
|
|
{
|
|
int ret;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif power up\n");
|
|
|
|
/*
|
|
* Hardware CUS232 version 2 has some issues with cold reset and the
|
|
* preferred (and safer) way to perform a device reset is through a
|
|
* warm reset.
|
|
*
|
|
* Warm reset doesn't always work though so fall back to cold reset may
|
|
* be necessary.
|
|
*/
|
|
ret = ath10k_pci_hif_power_up_warm(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to power up target using warm reset: %d\n",
|
|
ret);
|
|
|
|
if (ath10k_pci_reset_mode == ATH10K_PCI_RESET_WARM_ONLY)
|
|
return ret;
|
|
|
|
ath10k_warn(ar, "trying cold reset\n");
|
|
|
|
ret = __ath10k_pci_hif_power_up(ar, true);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to power up target using cold reset too (%d)\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ath10k_pci_hif_power_down(struct ath10k *ar)
|
|
{
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif power down\n");
|
|
|
|
ath10k_pci_warm_reset(ar);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
#define ATH10K_PCI_PM_CONTROL 0x44
|
|
|
|
static int ath10k_pci_hif_suspend(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct pci_dev *pdev = ar_pci->pdev;
|
|
u32 val;
|
|
|
|
pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val);
|
|
|
|
if ((val & 0x000000ff) != 0x3) {
|
|
pci_save_state(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL,
|
|
(val & 0xffffff00) | 0x03);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_hif_resume(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct pci_dev *pdev = ar_pci->pdev;
|
|
u32 val;
|
|
|
|
pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val);
|
|
|
|
if ((val & 0x000000ff) != 0) {
|
|
pci_restore_state(pdev);
|
|
pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL,
|
|
val & 0xffffff00);
|
|
/*
|
|
* Suspend/Resume resets the PCI configuration space,
|
|
* so we have to re-disable the RETRY_TIMEOUT register (0x41)
|
|
* to keep PCI Tx retries from interfering with C3 CPU state
|
|
*/
|
|
pci_read_config_dword(pdev, 0x40, &val);
|
|
|
|
if ((val & 0x0000ff00) != 0)
|
|
pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct ath10k_hif_ops ath10k_pci_hif_ops = {
|
|
.tx_sg = ath10k_pci_hif_tx_sg,
|
|
.exchange_bmi_msg = ath10k_pci_hif_exchange_bmi_msg,
|
|
.start = ath10k_pci_hif_start,
|
|
.stop = ath10k_pci_hif_stop,
|
|
.map_service_to_pipe = ath10k_pci_hif_map_service_to_pipe,
|
|
.get_default_pipe = ath10k_pci_hif_get_default_pipe,
|
|
.send_complete_check = ath10k_pci_hif_send_complete_check,
|
|
.set_callbacks = ath10k_pci_hif_set_callbacks,
|
|
.get_free_queue_number = ath10k_pci_hif_get_free_queue_number,
|
|
.power_up = ath10k_pci_hif_power_up,
|
|
.power_down = ath10k_pci_hif_power_down,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ath10k_pci_hif_suspend,
|
|
.resume = ath10k_pci_hif_resume,
|
|
#endif
|
|
};
|
|
|
|
static void ath10k_pci_ce_tasklet(unsigned long ptr)
|
|
{
|
|
struct ath10k_pci_pipe *pipe = (struct ath10k_pci_pipe *)ptr;
|
|
struct ath10k_pci *ar_pci = pipe->ar_pci;
|
|
|
|
ath10k_ce_per_engine_service(ar_pci->ar, pipe->pipe_num);
|
|
}
|
|
|
|
static void ath10k_msi_err_tasklet(unsigned long data)
|
|
{
|
|
struct ath10k *ar = (struct ath10k *)data;
|
|
|
|
if (!ath10k_pci_has_fw_crashed(ar)) {
|
|
ath10k_warn(ar, "received unsolicited fw crash interrupt\n");
|
|
return;
|
|
}
|
|
|
|
ath10k_pci_fw_crashed_clear(ar);
|
|
ath10k_pci_fw_crashed_dump(ar);
|
|
}
|
|
|
|
/*
|
|
* Handler for a per-engine interrupt on a PARTICULAR CE.
|
|
* This is used in cases where each CE has a private MSI interrupt.
|
|
*/
|
|
static irqreturn_t ath10k_pci_per_engine_handler(int irq, void *arg)
|
|
{
|
|
struct ath10k *ar = arg;
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int ce_id = irq - ar_pci->pdev->irq - MSI_ASSIGN_CE_INITIAL;
|
|
|
|
if (ce_id < 0 || ce_id >= ARRAY_SIZE(ar_pci->pipe_info)) {
|
|
ath10k_warn(ar, "unexpected/invalid irq %d ce_id %d\n", irq,
|
|
ce_id);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* NOTE: We are able to derive ce_id from irq because we
|
|
* use a one-to-one mapping for CE's 0..5.
|
|
* CE's 6 & 7 do not use interrupts at all.
|
|
*
|
|
* This mapping must be kept in sync with the mapping
|
|
* used by firmware.
|
|
*/
|
|
tasklet_schedule(&ar_pci->pipe_info[ce_id].intr);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t ath10k_pci_msi_fw_handler(int irq, void *arg)
|
|
{
|
|
struct ath10k *ar = arg;
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
tasklet_schedule(&ar_pci->msi_fw_err);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* Top-level interrupt handler for all PCI interrupts from a Target.
|
|
* When a block of MSI interrupts is allocated, this top-level handler
|
|
* is not used; instead, we directly call the correct sub-handler.
|
|
*/
|
|
static irqreturn_t ath10k_pci_interrupt_handler(int irq, void *arg)
|
|
{
|
|
struct ath10k *ar = arg;
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
if (ar_pci->num_msi_intrs == 0) {
|
|
if (!ath10k_pci_irq_pending(ar))
|
|
return IRQ_NONE;
|
|
|
|
ath10k_pci_disable_and_clear_legacy_irq(ar);
|
|
}
|
|
|
|
tasklet_schedule(&ar_pci->intr_tq);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void ath10k_pci_tasklet(unsigned long data)
|
|
{
|
|
struct ath10k *ar = (struct ath10k *)data;
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
if (ath10k_pci_has_fw_crashed(ar)) {
|
|
ath10k_pci_fw_crashed_clear(ar);
|
|
ath10k_pci_fw_crashed_dump(ar);
|
|
return;
|
|
}
|
|
|
|
ath10k_ce_per_engine_service_any(ar);
|
|
|
|
/* Re-enable legacy irq that was disabled in the irq handler */
|
|
if (ar_pci->num_msi_intrs == 0)
|
|
ath10k_pci_enable_legacy_irq(ar);
|
|
}
|
|
|
|
static int ath10k_pci_request_irq_msix(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int ret, i;
|
|
|
|
ret = request_irq(ar_pci->pdev->irq + MSI_ASSIGN_FW,
|
|
ath10k_pci_msi_fw_handler,
|
|
IRQF_SHARED, "ath10k_pci", ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to request MSI-X fw irq %d: %d\n",
|
|
ar_pci->pdev->irq + MSI_ASSIGN_FW, ret);
|
|
return ret;
|
|
}
|
|
|
|
for (i = MSI_ASSIGN_CE_INITIAL; i <= MSI_ASSIGN_CE_MAX; i++) {
|
|
ret = request_irq(ar_pci->pdev->irq + i,
|
|
ath10k_pci_per_engine_handler,
|
|
IRQF_SHARED, "ath10k_pci", ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to request MSI-X ce irq %d: %d\n",
|
|
ar_pci->pdev->irq + i, ret);
|
|
|
|
for (i--; i >= MSI_ASSIGN_CE_INITIAL; i--)
|
|
free_irq(ar_pci->pdev->irq + i, ar);
|
|
|
|
free_irq(ar_pci->pdev->irq + MSI_ASSIGN_FW, ar);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_request_irq_msi(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int ret;
|
|
|
|
ret = request_irq(ar_pci->pdev->irq,
|
|
ath10k_pci_interrupt_handler,
|
|
IRQF_SHARED, "ath10k_pci", ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to request MSI irq %d: %d\n",
|
|
ar_pci->pdev->irq, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_request_irq_legacy(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int ret;
|
|
|
|
ret = request_irq(ar_pci->pdev->irq,
|
|
ath10k_pci_interrupt_handler,
|
|
IRQF_SHARED, "ath10k_pci", ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to request legacy irq %d: %d\n",
|
|
ar_pci->pdev->irq, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_request_irq(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
switch (ar_pci->num_msi_intrs) {
|
|
case 0:
|
|
return ath10k_pci_request_irq_legacy(ar);
|
|
case 1:
|
|
return ath10k_pci_request_irq_msi(ar);
|
|
case MSI_NUM_REQUEST:
|
|
return ath10k_pci_request_irq_msix(ar);
|
|
}
|
|
|
|
ath10k_warn(ar, "unknown irq configuration upon request\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void ath10k_pci_free_irq(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int i;
|
|
|
|
/* There's at least one interrupt irregardless whether its legacy INTR
|
|
* or MSI or MSI-X */
|
|
for (i = 0; i < max(1, ar_pci->num_msi_intrs); i++)
|
|
free_irq(ar_pci->pdev->irq + i, ar);
|
|
}
|
|
|
|
static void ath10k_pci_init_irq_tasklets(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int i;
|
|
|
|
tasklet_init(&ar_pci->intr_tq, ath10k_pci_tasklet, (unsigned long)ar);
|
|
tasklet_init(&ar_pci->msi_fw_err, ath10k_msi_err_tasklet,
|
|
(unsigned long)ar);
|
|
|
|
for (i = 0; i < CE_COUNT; i++) {
|
|
ar_pci->pipe_info[i].ar_pci = ar_pci;
|
|
tasklet_init(&ar_pci->pipe_info[i].intr, ath10k_pci_ce_tasklet,
|
|
(unsigned long)&ar_pci->pipe_info[i]);
|
|
}
|
|
}
|
|
|
|
static int ath10k_pci_init_irq(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int ret;
|
|
|
|
ath10k_pci_init_irq_tasklets(ar);
|
|
|
|
if (ath10k_pci_irq_mode != ATH10K_PCI_IRQ_AUTO)
|
|
ath10k_info(ar, "limiting irq mode to: %d\n",
|
|
ath10k_pci_irq_mode);
|
|
|
|
/* Try MSI-X */
|
|
if (ath10k_pci_irq_mode == ATH10K_PCI_IRQ_AUTO) {
|
|
ar_pci->num_msi_intrs = MSI_NUM_REQUEST;
|
|
ret = pci_enable_msi_range(ar_pci->pdev, ar_pci->num_msi_intrs,
|
|
ar_pci->num_msi_intrs);
|
|
if (ret > 0)
|
|
return 0;
|
|
|
|
/* fall-through */
|
|
}
|
|
|
|
/* Try MSI */
|
|
if (ath10k_pci_irq_mode != ATH10K_PCI_IRQ_LEGACY) {
|
|
ar_pci->num_msi_intrs = 1;
|
|
ret = pci_enable_msi(ar_pci->pdev);
|
|
if (ret == 0)
|
|
return 0;
|
|
|
|
/* fall-through */
|
|
}
|
|
|
|
/* Try legacy irq
|
|
*
|
|
* A potential race occurs here: The CORE_BASE write
|
|
* depends on target correctly decoding AXI address but
|
|
* host won't know when target writes BAR to CORE_CTRL.
|
|
* This write might get lost if target has NOT written BAR.
|
|
* For now, fix the race by repeating the write in below
|
|
* synchronization checking. */
|
|
ar_pci->num_msi_intrs = 0;
|
|
|
|
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_ENABLE_ADDRESS,
|
|
PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ath10k_pci_deinit_irq_legacy(struct ath10k *ar)
|
|
{
|
|
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_ENABLE_ADDRESS,
|
|
0);
|
|
}
|
|
|
|
static int ath10k_pci_deinit_irq(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
switch (ar_pci->num_msi_intrs) {
|
|
case 0:
|
|
ath10k_pci_deinit_irq_legacy(ar);
|
|
return 0;
|
|
case 1:
|
|
/* fall-through */
|
|
case MSI_NUM_REQUEST:
|
|
pci_disable_msi(ar_pci->pdev);
|
|
return 0;
|
|
default:
|
|
pci_disable_msi(ar_pci->pdev);
|
|
}
|
|
|
|
ath10k_warn(ar, "unknown irq configuration upon deinit\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ath10k_pci_wait_for_target_init(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
unsigned long timeout;
|
|
u32 val;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot waiting target to initialise\n");
|
|
|
|
timeout = jiffies + msecs_to_jiffies(ATH10K_PCI_TARGET_WAIT);
|
|
|
|
do {
|
|
val = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot target indicator %x\n",
|
|
val);
|
|
|
|
/* target should never return this */
|
|
if (val == 0xffffffff)
|
|
continue;
|
|
|
|
/* the device has crashed so don't bother trying anymore */
|
|
if (val & FW_IND_EVENT_PENDING)
|
|
break;
|
|
|
|
if (val & FW_IND_INITIALIZED)
|
|
break;
|
|
|
|
if (ar_pci->num_msi_intrs == 0)
|
|
/* Fix potential race by repeating CORE_BASE writes */
|
|
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
|
|
PCIE_INTR_ENABLE_ADDRESS,
|
|
PCIE_INTR_FIRMWARE_MASK |
|
|
PCIE_INTR_CE_MASK_ALL);
|
|
|
|
mdelay(10);
|
|
} while (time_before(jiffies, timeout));
|
|
|
|
if (val == 0xffffffff) {
|
|
ath10k_err(ar, "failed to read device register, device is gone\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (val & FW_IND_EVENT_PENDING) {
|
|
ath10k_warn(ar, "device has crashed during init\n");
|
|
ath10k_pci_fw_crashed_clear(ar);
|
|
ath10k_pci_fw_crashed_dump(ar);
|
|
return -ECOMM;
|
|
}
|
|
|
|
if (!(val & FW_IND_INITIALIZED)) {
|
|
ath10k_err(ar, "failed to receive initialized event from target: %08x\n",
|
|
val);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot target initialised\n");
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_cold_reset(struct ath10k *ar)
|
|
{
|
|
int i;
|
|
u32 val;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot cold reset\n");
|
|
|
|
/* Put Target, including PCIe, into RESET. */
|
|
val = ath10k_pci_reg_read32(ar, SOC_GLOBAL_RESET_ADDRESS);
|
|
val |= 1;
|
|
ath10k_pci_reg_write32(ar, SOC_GLOBAL_RESET_ADDRESS, val);
|
|
|
|
for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) {
|
|
if (ath10k_pci_reg_read32(ar, RTC_STATE_ADDRESS) &
|
|
RTC_STATE_COLD_RESET_MASK)
|
|
break;
|
|
msleep(1);
|
|
}
|
|
|
|
/* Pull Target, including PCIe, out of RESET. */
|
|
val &= ~1;
|
|
ath10k_pci_reg_write32(ar, SOC_GLOBAL_RESET_ADDRESS, val);
|
|
|
|
for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) {
|
|
if (!(ath10k_pci_reg_read32(ar, RTC_STATE_ADDRESS) &
|
|
RTC_STATE_COLD_RESET_MASK))
|
|
break;
|
|
msleep(1);
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot cold reset complete\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_claim(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct pci_dev *pdev = ar_pci->pdev;
|
|
u32 lcr_val;
|
|
int ret;
|
|
|
|
pci_set_drvdata(pdev, ar);
|
|
|
|
ret = pci_enable_device(pdev);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to enable pci device: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = pci_request_region(pdev, BAR_NUM, "ath");
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to request region BAR%d: %d\n", BAR_NUM,
|
|
ret);
|
|
goto err_device;
|
|
}
|
|
|
|
/* Target expects 32 bit DMA. Enforce it. */
|
|
ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to set dma mask to 32-bit: %d\n", ret);
|
|
goto err_region;
|
|
}
|
|
|
|
ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to set consistent dma mask to 32-bit: %d\n",
|
|
ret);
|
|
goto err_region;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
/* Workaround: Disable ASPM */
|
|
pci_read_config_dword(pdev, 0x80, &lcr_val);
|
|
pci_write_config_dword(pdev, 0x80, (lcr_val & 0xffffff00));
|
|
|
|
/* Arrange for access to Target SoC registers. */
|
|
ar_pci->mem = pci_iomap(pdev, BAR_NUM, 0);
|
|
if (!ar_pci->mem) {
|
|
ath10k_err(ar, "failed to iomap BAR%d\n", BAR_NUM);
|
|
ret = -EIO;
|
|
goto err_master;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot pci_mem 0x%p\n", ar_pci->mem);
|
|
return 0;
|
|
|
|
err_master:
|
|
pci_clear_master(pdev);
|
|
|
|
err_region:
|
|
pci_release_region(pdev, BAR_NUM);
|
|
|
|
err_device:
|
|
pci_disable_device(pdev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ath10k_pci_release(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct pci_dev *pdev = ar_pci->pdev;
|
|
|
|
pci_iounmap(pdev, ar_pci->mem);
|
|
pci_release_region(pdev, BAR_NUM);
|
|
pci_clear_master(pdev);
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
static int ath10k_pci_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *pci_dev)
|
|
{
|
|
int ret = 0;
|
|
struct ath10k *ar;
|
|
struct ath10k_pci *ar_pci;
|
|
u32 chip_id;
|
|
|
|
ar = ath10k_core_create(sizeof(*ar_pci), &pdev->dev,
|
|
&ath10k_pci_hif_ops);
|
|
if (!ar) {
|
|
dev_err(&pdev->dev, "failed to allocate core\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI, "pci probe\n");
|
|
|
|
ar_pci = ath10k_pci_priv(ar);
|
|
ar_pci->pdev = pdev;
|
|
ar_pci->dev = &pdev->dev;
|
|
ar_pci->ar = ar;
|
|
|
|
spin_lock_init(&ar_pci->ce_lock);
|
|
setup_timer(&ar_pci->rx_post_retry, ath10k_pci_rx_replenish_retry,
|
|
(unsigned long)ar);
|
|
|
|
ret = ath10k_pci_claim(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to claim device: %d\n", ret);
|
|
goto err_core_destroy;
|
|
}
|
|
|
|
ret = ath10k_pci_wake(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to wake up: %d\n", ret);
|
|
goto err_release;
|
|
}
|
|
|
|
chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
|
|
if (chip_id == 0xffffffff) {
|
|
ath10k_err(ar, "failed to get chip id\n");
|
|
goto err_sleep;
|
|
}
|
|
|
|
ret = ath10k_pci_alloc_ce(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to allocate copy engine pipes: %d\n",
|
|
ret);
|
|
goto err_sleep;
|
|
}
|
|
|
|
ath10k_pci_ce_deinit(ar);
|
|
|
|
ret = ath10k_ce_disable_interrupts(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to disable copy engine interrupts: %d\n",
|
|
ret);
|
|
goto err_free_ce;
|
|
}
|
|
|
|
/* Workaround: There's no known way to mask all possible interrupts via
|
|
* device CSR. The only way to make sure device doesn't assert
|
|
* interrupts is to reset it. Interrupts are then disabled on host
|
|
* after handlers are registered.
|
|
*/
|
|
ath10k_pci_warm_reset(ar);
|
|
|
|
ret = ath10k_pci_init_irq(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to init irqs: %d\n", ret);
|
|
goto err_free_ce;
|
|
}
|
|
|
|
ath10k_info(ar, "pci irq %s interrupts %d irq_mode %d reset_mode %d\n",
|
|
ath10k_pci_get_irq_method(ar), ar_pci->num_msi_intrs,
|
|
ath10k_pci_irq_mode, ath10k_pci_reset_mode);
|
|
|
|
ret = ath10k_pci_request_irq(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to request irqs: %d\n", ret);
|
|
goto err_deinit_irq;
|
|
}
|
|
|
|
/* This shouldn't race as the device has been reset above. */
|
|
ath10k_pci_irq_disable(ar);
|
|
|
|
ret = ath10k_core_register(ar, chip_id);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to register driver core: %d\n", ret);
|
|
goto err_free_irq;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_free_irq:
|
|
ath10k_pci_free_irq(ar);
|
|
ath10k_pci_kill_tasklet(ar);
|
|
|
|
err_deinit_irq:
|
|
ath10k_pci_deinit_irq(ar);
|
|
|
|
err_free_ce:
|
|
ath10k_pci_free_ce(ar);
|
|
|
|
err_sleep:
|
|
ath10k_pci_sleep(ar);
|
|
|
|
err_release:
|
|
ath10k_pci_release(ar);
|
|
|
|
err_core_destroy:
|
|
ath10k_core_destroy(ar);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ath10k_pci_remove(struct pci_dev *pdev)
|
|
{
|
|
struct ath10k *ar = pci_get_drvdata(pdev);
|
|
struct ath10k_pci *ar_pci;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI, "pci remove\n");
|
|
|
|
if (!ar)
|
|
return;
|
|
|
|
ar_pci = ath10k_pci_priv(ar);
|
|
|
|
if (!ar_pci)
|
|
return;
|
|
|
|
ath10k_core_unregister(ar);
|
|
ath10k_pci_free_irq(ar);
|
|
ath10k_pci_kill_tasklet(ar);
|
|
ath10k_pci_deinit_irq(ar);
|
|
ath10k_pci_ce_deinit(ar);
|
|
ath10k_pci_free_ce(ar);
|
|
ath10k_pci_sleep(ar);
|
|
ath10k_pci_release(ar);
|
|
ath10k_core_destroy(ar);
|
|
}
|
|
|
|
MODULE_DEVICE_TABLE(pci, ath10k_pci_id_table);
|
|
|
|
static struct pci_driver ath10k_pci_driver = {
|
|
.name = "ath10k_pci",
|
|
.id_table = ath10k_pci_id_table,
|
|
.probe = ath10k_pci_probe,
|
|
.remove = ath10k_pci_remove,
|
|
};
|
|
|
|
static int __init ath10k_pci_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = pci_register_driver(&ath10k_pci_driver);
|
|
if (ret)
|
|
printk(KERN_ERR "failed to register ath10k pci driver: %d\n",
|
|
ret);
|
|
|
|
return ret;
|
|
}
|
|
module_init(ath10k_pci_init);
|
|
|
|
static void __exit ath10k_pci_exit(void)
|
|
{
|
|
pci_unregister_driver(&ath10k_pci_driver);
|
|
}
|
|
|
|
module_exit(ath10k_pci_exit);
|
|
|
|
MODULE_AUTHOR("Qualcomm Atheros");
|
|
MODULE_DESCRIPTION("Driver support for Atheros QCA988X PCIe devices");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_FW_3_FILE);
|
|
MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_BOARD_DATA_FILE);
|