mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 16:36:42 +07:00
ff82c587a9
The driver was updated to use the device tree rather than the platform data. Signed-off-by: John Linn <john.linn@xilinx.com>
464 lines
13 KiB
C
464 lines
13 KiB
C
/*
|
|
* xilinx_spi.c
|
|
*
|
|
* Xilinx SPI controller driver (master mode only)
|
|
*
|
|
* Author: MontaVista Software, Inc.
|
|
* source@mvista.com
|
|
*
|
|
* 2002-2007 (c) MontaVista Software, Inc. This file is licensed under the
|
|
* terms of the GNU General Public License version 2. This program is licensed
|
|
* "as is" without any warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_spi.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/spi_bitbang.h>
|
|
#include <linux/io.h>
|
|
|
|
#define XILINX_SPI_NAME "xilinx_spi"
|
|
|
|
/* Register definitions as per "OPB Serial Peripheral Interface (SPI) (v1.00e)
|
|
* Product Specification", DS464
|
|
*/
|
|
#define XSPI_CR_OFFSET 0x62 /* 16-bit Control Register */
|
|
|
|
#define XSPI_CR_ENABLE 0x02
|
|
#define XSPI_CR_MASTER_MODE 0x04
|
|
#define XSPI_CR_CPOL 0x08
|
|
#define XSPI_CR_CPHA 0x10
|
|
#define XSPI_CR_MODE_MASK (XSPI_CR_CPHA | XSPI_CR_CPOL)
|
|
#define XSPI_CR_TXFIFO_RESET 0x20
|
|
#define XSPI_CR_RXFIFO_RESET 0x40
|
|
#define XSPI_CR_MANUAL_SSELECT 0x80
|
|
#define XSPI_CR_TRANS_INHIBIT 0x100
|
|
|
|
#define XSPI_SR_OFFSET 0x67 /* 8-bit Status Register */
|
|
|
|
#define XSPI_SR_RX_EMPTY_MASK 0x01 /* Receive FIFO is empty */
|
|
#define XSPI_SR_RX_FULL_MASK 0x02 /* Receive FIFO is full */
|
|
#define XSPI_SR_TX_EMPTY_MASK 0x04 /* Transmit FIFO is empty */
|
|
#define XSPI_SR_TX_FULL_MASK 0x08 /* Transmit FIFO is full */
|
|
#define XSPI_SR_MODE_FAULT_MASK 0x10 /* Mode fault error */
|
|
|
|
#define XSPI_TXD_OFFSET 0x6b /* 8-bit Data Transmit Register */
|
|
#define XSPI_RXD_OFFSET 0x6f /* 8-bit Data Receive Register */
|
|
|
|
#define XSPI_SSR_OFFSET 0x70 /* 32-bit Slave Select Register */
|
|
|
|
/* Register definitions as per "OPB IPIF (v3.01c) Product Specification", DS414
|
|
* IPIF registers are 32 bit
|
|
*/
|
|
#define XIPIF_V123B_DGIER_OFFSET 0x1c /* IPIF global int enable reg */
|
|
#define XIPIF_V123B_GINTR_ENABLE 0x80000000
|
|
|
|
#define XIPIF_V123B_IISR_OFFSET 0x20 /* IPIF interrupt status reg */
|
|
#define XIPIF_V123B_IIER_OFFSET 0x28 /* IPIF interrupt enable reg */
|
|
|
|
#define XSPI_INTR_MODE_FAULT 0x01 /* Mode fault error */
|
|
#define XSPI_INTR_SLAVE_MODE_FAULT 0x02 /* Selected as slave while
|
|
* disabled */
|
|
#define XSPI_INTR_TX_EMPTY 0x04 /* TxFIFO is empty */
|
|
#define XSPI_INTR_TX_UNDERRUN 0x08 /* TxFIFO was underrun */
|
|
#define XSPI_INTR_RX_FULL 0x10 /* RxFIFO is full */
|
|
#define XSPI_INTR_RX_OVERRUN 0x20 /* RxFIFO was overrun */
|
|
|
|
#define XIPIF_V123B_RESETR_OFFSET 0x40 /* IPIF reset register */
|
|
#define XIPIF_V123B_RESET_MASK 0x0a /* the value to write */
|
|
|
|
struct xilinx_spi {
|
|
/* bitbang has to be first */
|
|
struct spi_bitbang bitbang;
|
|
struct completion done;
|
|
|
|
void __iomem *regs; /* virt. address of the control registers */
|
|
|
|
u32 irq;
|
|
|
|
u32 speed_hz; /* SCK has a fixed frequency of speed_hz Hz */
|
|
|
|
u8 *rx_ptr; /* pointer in the Tx buffer */
|
|
const u8 *tx_ptr; /* pointer in the Rx buffer */
|
|
int remaining_bytes; /* the number of bytes left to transfer */
|
|
};
|
|
|
|
static void xspi_init_hw(void __iomem *regs_base)
|
|
{
|
|
/* Reset the SPI device */
|
|
out_be32(regs_base + XIPIF_V123B_RESETR_OFFSET,
|
|
XIPIF_V123B_RESET_MASK);
|
|
/* Disable all the interrupts just in case */
|
|
out_be32(regs_base + XIPIF_V123B_IIER_OFFSET, 0);
|
|
/* Enable the global IPIF interrupt */
|
|
out_be32(regs_base + XIPIF_V123B_DGIER_OFFSET,
|
|
XIPIF_V123B_GINTR_ENABLE);
|
|
/* Deselect the slave on the SPI bus */
|
|
out_be32(regs_base + XSPI_SSR_OFFSET, 0xffff);
|
|
/* Disable the transmitter, enable Manual Slave Select Assertion,
|
|
* put SPI controller into master mode, and enable it */
|
|
out_be16(regs_base + XSPI_CR_OFFSET,
|
|
XSPI_CR_TRANS_INHIBIT | XSPI_CR_MANUAL_SSELECT
|
|
| XSPI_CR_MASTER_MODE | XSPI_CR_ENABLE);
|
|
}
|
|
|
|
static void xilinx_spi_chipselect(struct spi_device *spi, int is_on)
|
|
{
|
|
struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
|
|
|
|
if (is_on == BITBANG_CS_INACTIVE) {
|
|
/* Deselect the slave on the SPI bus */
|
|
out_be32(xspi->regs + XSPI_SSR_OFFSET, 0xffff);
|
|
} else if (is_on == BITBANG_CS_ACTIVE) {
|
|
/* Set the SPI clock phase and polarity */
|
|
u16 cr = in_be16(xspi->regs + XSPI_CR_OFFSET)
|
|
& ~XSPI_CR_MODE_MASK;
|
|
if (spi->mode & SPI_CPHA)
|
|
cr |= XSPI_CR_CPHA;
|
|
if (spi->mode & SPI_CPOL)
|
|
cr |= XSPI_CR_CPOL;
|
|
out_be16(xspi->regs + XSPI_CR_OFFSET, cr);
|
|
|
|
/* We do not check spi->max_speed_hz here as the SPI clock
|
|
* frequency is not software programmable (the IP block design
|
|
* parameter)
|
|
*/
|
|
|
|
/* Activate the chip select */
|
|
out_be32(xspi->regs + XSPI_SSR_OFFSET,
|
|
~(0x0001 << spi->chip_select));
|
|
}
|
|
}
|
|
|
|
/* spi_bitbang requires custom setup_transfer() to be defined if there is a
|
|
* custom txrx_bufs(). We have nothing to setup here as the SPI IP block
|
|
* supports just 8 bits per word, and SPI clock can't be changed in software.
|
|
* Check for 8 bits per word. Chip select delay calculations could be
|
|
* added here as soon as bitbang_work() can be made aware of the delay value.
|
|
*/
|
|
static int xilinx_spi_setup_transfer(struct spi_device *spi,
|
|
struct spi_transfer *t)
|
|
{
|
|
u8 bits_per_word;
|
|
|
|
bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
|
|
if (bits_per_word != 8) {
|
|
dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
|
|
__func__, bits_per_word);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* the spi->mode bits understood by this driver: */
|
|
#define MODEBITS (SPI_CPOL | SPI_CPHA)
|
|
|
|
static int xilinx_spi_setup(struct spi_device *spi)
|
|
{
|
|
struct spi_bitbang *bitbang;
|
|
struct xilinx_spi *xspi;
|
|
int retval;
|
|
|
|
xspi = spi_master_get_devdata(spi->master);
|
|
bitbang = &xspi->bitbang;
|
|
|
|
if (!spi->bits_per_word)
|
|
spi->bits_per_word = 8;
|
|
|
|
if (spi->mode & ~MODEBITS) {
|
|
dev_err(&spi->dev, "%s, unsupported mode bits %x\n",
|
|
__func__, spi->mode & ~MODEBITS);
|
|
return -EINVAL;
|
|
}
|
|
|
|
retval = xilinx_spi_setup_transfer(spi, NULL);
|
|
if (retval < 0)
|
|
return retval;
|
|
|
|
dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
|
|
__func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi)
|
|
{
|
|
u8 sr;
|
|
|
|
/* Fill the Tx FIFO with as many bytes as possible */
|
|
sr = in_8(xspi->regs + XSPI_SR_OFFSET);
|
|
while ((sr & XSPI_SR_TX_FULL_MASK) == 0 && xspi->remaining_bytes > 0) {
|
|
if (xspi->tx_ptr) {
|
|
out_8(xspi->regs + XSPI_TXD_OFFSET, *xspi->tx_ptr++);
|
|
} else {
|
|
out_8(xspi->regs + XSPI_TXD_OFFSET, 0);
|
|
}
|
|
xspi->remaining_bytes--;
|
|
sr = in_8(xspi->regs + XSPI_SR_OFFSET);
|
|
}
|
|
}
|
|
|
|
static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
|
|
{
|
|
struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
|
|
u32 ipif_ier;
|
|
u16 cr;
|
|
|
|
/* We get here with transmitter inhibited */
|
|
|
|
xspi->tx_ptr = t->tx_buf;
|
|
xspi->rx_ptr = t->rx_buf;
|
|
xspi->remaining_bytes = t->len;
|
|
INIT_COMPLETION(xspi->done);
|
|
|
|
xilinx_spi_fill_tx_fifo(xspi);
|
|
|
|
/* Enable the transmit empty interrupt, which we use to determine
|
|
* progress on the transmission.
|
|
*/
|
|
ipif_ier = in_be32(xspi->regs + XIPIF_V123B_IIER_OFFSET);
|
|
out_be32(xspi->regs + XIPIF_V123B_IIER_OFFSET,
|
|
ipif_ier | XSPI_INTR_TX_EMPTY);
|
|
|
|
/* Start the transfer by not inhibiting the transmitter any longer */
|
|
cr = in_be16(xspi->regs + XSPI_CR_OFFSET) & ~XSPI_CR_TRANS_INHIBIT;
|
|
out_be16(xspi->regs + XSPI_CR_OFFSET, cr);
|
|
|
|
wait_for_completion(&xspi->done);
|
|
|
|
/* Disable the transmit empty interrupt */
|
|
out_be32(xspi->regs + XIPIF_V123B_IIER_OFFSET, ipif_ier);
|
|
|
|
return t->len - xspi->remaining_bytes;
|
|
}
|
|
|
|
|
|
/* This driver supports single master mode only. Hence Tx FIFO Empty
|
|
* is the only interrupt we care about.
|
|
* Receive FIFO Overrun, Transmit FIFO Underrun, Mode Fault, and Slave Mode
|
|
* Fault are not to happen.
|
|
*/
|
|
static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
|
|
{
|
|
struct xilinx_spi *xspi = dev_id;
|
|
u32 ipif_isr;
|
|
|
|
/* Get the IPIF interrupts, and clear them immediately */
|
|
ipif_isr = in_be32(xspi->regs + XIPIF_V123B_IISR_OFFSET);
|
|
out_be32(xspi->regs + XIPIF_V123B_IISR_OFFSET, ipif_isr);
|
|
|
|
if (ipif_isr & XSPI_INTR_TX_EMPTY) { /* Transmission completed */
|
|
u16 cr;
|
|
u8 sr;
|
|
|
|
/* A transmit has just completed. Process received data and
|
|
* check for more data to transmit. Always inhibit the
|
|
* transmitter while the Isr refills the transmit register/FIFO,
|
|
* or make sure it is stopped if we're done.
|
|
*/
|
|
cr = in_be16(xspi->regs + XSPI_CR_OFFSET);
|
|
out_be16(xspi->regs + XSPI_CR_OFFSET,
|
|
cr | XSPI_CR_TRANS_INHIBIT);
|
|
|
|
/* Read out all the data from the Rx FIFO */
|
|
sr = in_8(xspi->regs + XSPI_SR_OFFSET);
|
|
while ((sr & XSPI_SR_RX_EMPTY_MASK) == 0) {
|
|
u8 data;
|
|
|
|
data = in_8(xspi->regs + XSPI_RXD_OFFSET);
|
|
if (xspi->rx_ptr) {
|
|
*xspi->rx_ptr++ = data;
|
|
}
|
|
sr = in_8(xspi->regs + XSPI_SR_OFFSET);
|
|
}
|
|
|
|
/* See if there is more data to send */
|
|
if (xspi->remaining_bytes > 0) {
|
|
xilinx_spi_fill_tx_fifo(xspi);
|
|
/* Start the transfer by not inhibiting the
|
|
* transmitter any longer
|
|
*/
|
|
out_be16(xspi->regs + XSPI_CR_OFFSET, cr);
|
|
} else {
|
|
/* No more data to send.
|
|
* Indicate the transfer is completed.
|
|
*/
|
|
complete(&xspi->done);
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int __init xilinx_spi_of_probe(struct of_device *ofdev,
|
|
const struct of_device_id *match)
|
|
{
|
|
struct spi_master *master;
|
|
struct xilinx_spi *xspi;
|
|
struct resource r_irq_struct;
|
|
struct resource r_mem_struct;
|
|
|
|
struct resource *r_irq = &r_irq_struct;
|
|
struct resource *r_mem = &r_mem_struct;
|
|
int rc = 0;
|
|
const u32 *prop;
|
|
int len;
|
|
|
|
/* Get resources(memory, IRQ) associated with the device */
|
|
master = spi_alloc_master(&ofdev->dev, sizeof(struct xilinx_spi));
|
|
|
|
if (master == NULL) {
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dev_set_drvdata(&ofdev->dev, master);
|
|
|
|
rc = of_address_to_resource(ofdev->node, 0, r_mem);
|
|
if (rc) {
|
|
dev_warn(&ofdev->dev, "invalid address\n");
|
|
goto put_master;
|
|
}
|
|
|
|
rc = of_irq_to_resource(ofdev->node, 0, r_irq);
|
|
if (rc == NO_IRQ) {
|
|
dev_warn(&ofdev->dev, "no IRQ found\n");
|
|
goto put_master;
|
|
}
|
|
|
|
xspi = spi_master_get_devdata(master);
|
|
xspi->bitbang.master = spi_master_get(master);
|
|
xspi->bitbang.chipselect = xilinx_spi_chipselect;
|
|
xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer;
|
|
xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs;
|
|
xspi->bitbang.master->setup = xilinx_spi_setup;
|
|
init_completion(&xspi->done);
|
|
|
|
xspi->irq = r_irq->start;
|
|
|
|
if (!request_mem_region(r_mem->start,
|
|
r_mem->end - r_mem->start + 1, XILINX_SPI_NAME)) {
|
|
rc = -ENXIO;
|
|
dev_warn(&ofdev->dev, "memory request failure\n");
|
|
goto put_master;
|
|
}
|
|
|
|
xspi->regs = ioremap(r_mem->start, r_mem->end - r_mem->start + 1);
|
|
if (xspi->regs == NULL) {
|
|
rc = -ENOMEM;
|
|
dev_warn(&ofdev->dev, "ioremap failure\n");
|
|
goto put_master;
|
|
}
|
|
xspi->irq = r_irq->start;
|
|
|
|
/* dynamic bus assignment */
|
|
master->bus_num = -1;
|
|
|
|
/* number of slave select bits is required */
|
|
prop = of_get_property(ofdev->node, "xlnx,num-ss-bits", &len);
|
|
if (!prop || len < sizeof(*prop)) {
|
|
dev_warn(&ofdev->dev, "no 'xlnx,num-ss-bits' property\n");
|
|
goto put_master;
|
|
}
|
|
master->num_chipselect = *prop;
|
|
|
|
/* SPI controller initializations */
|
|
xspi_init_hw(xspi->regs);
|
|
|
|
/* Register for SPI Interrupt */
|
|
rc = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi);
|
|
if (rc != 0) {
|
|
dev_warn(&ofdev->dev, "irq request failure: %d\n", xspi->irq);
|
|
goto unmap_io;
|
|
}
|
|
|
|
rc = spi_bitbang_start(&xspi->bitbang);
|
|
if (rc != 0) {
|
|
dev_err(&ofdev->dev, "spi_bitbang_start FAILED\n");
|
|
goto free_irq;
|
|
}
|
|
|
|
dev_info(&ofdev->dev, "at 0x%08X mapped to 0x%08X, irq=%d\n",
|
|
(unsigned int)r_mem->start, (u32)xspi->regs, xspi->irq);
|
|
|
|
/* Add any subnodes on the SPI bus */
|
|
of_register_spi_devices(master, ofdev->node);
|
|
|
|
return rc;
|
|
|
|
free_irq:
|
|
free_irq(xspi->irq, xspi);
|
|
unmap_io:
|
|
iounmap(xspi->regs);
|
|
put_master:
|
|
spi_master_put(master);
|
|
return rc;
|
|
}
|
|
|
|
static int __devexit xilinx_spi_remove(struct of_device *ofdev)
|
|
{
|
|
struct xilinx_spi *xspi;
|
|
struct spi_master *master;
|
|
|
|
master = platform_get_drvdata(ofdev);
|
|
xspi = spi_master_get_devdata(master);
|
|
|
|
spi_bitbang_stop(&xspi->bitbang);
|
|
free_irq(xspi->irq, xspi);
|
|
iounmap(xspi->regs);
|
|
dev_set_drvdata(&ofdev->dev, 0);
|
|
spi_master_put(xspi->bitbang.master);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* work with hotplug and coldplug */
|
|
MODULE_ALIAS("platform:" XILINX_SPI_NAME);
|
|
|
|
static int __exit xilinx_spi_of_remove(struct of_device *op)
|
|
{
|
|
return xilinx_spi_remove(op);
|
|
}
|
|
|
|
static struct of_device_id xilinx_spi_of_match[] = {
|
|
{ .compatible = "xlnx,xps-spi-2.00.a", },
|
|
{ .compatible = "xlnx,xps-spi-2.00.b", },
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
|
|
|
|
static struct of_platform_driver xilinx_spi_of_driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "xilinx-xps-spi",
|
|
.match_table = xilinx_spi_of_match,
|
|
.probe = xilinx_spi_of_probe,
|
|
.remove = __exit_p(xilinx_spi_of_remove),
|
|
.driver = {
|
|
.name = "xilinx-xps-spi",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init xilinx_spi_init(void)
|
|
{
|
|
return of_register_platform_driver(&xilinx_spi_of_driver);
|
|
}
|
|
module_init(xilinx_spi_init);
|
|
|
|
static void __exit xilinx_spi_exit(void)
|
|
{
|
|
of_unregister_platform_driver(&xilinx_spi_of_driver);
|
|
}
|
|
module_exit(xilinx_spi_exit);
|
|
MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
|
|
MODULE_DESCRIPTION("Xilinx SPI driver");
|
|
MODULE_LICENSE("GPL");
|