mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 17:25:07 +07:00
75fd7ffa7f
Remove reference to the original Nehalem Turbo white paper, since it has moved, and these mechanisms have now long since been documented in the Software Developer's Manual. Reported-by: Jeremie Lagraviere <jeremie@simula.no> Signed-off-by: Len Brown <len.brown@intel.com>
269 lines
12 KiB
Groff
269 lines
12 KiB
Groff
.TH TURBOSTAT 8
|
|
.SH NAME
|
|
turbostat \- Report processor frequency and idle statistics
|
|
.SH SYNOPSIS
|
|
.ft B
|
|
.B turbostat
|
|
.RB [ Options ]
|
|
.RB command
|
|
.br
|
|
.B turbostat
|
|
.RB [ Options ]
|
|
.RB [ "\--interval seconds" ]
|
|
.SH DESCRIPTION
|
|
\fBturbostat \fP reports processor topology, frequency,
|
|
idle power-state statistics, temperature and power on X86 processors.
|
|
There are two ways to invoke turbostat.
|
|
The first method is to supply a
|
|
\fBcommand\fP, which is forked and statistics are printed
|
|
upon its completion.
|
|
The second method is to omit the command,
|
|
and turbostat displays statistics every 5 seconds.
|
|
The 5-second interval can be changed using the --interval option.
|
|
.PP
|
|
Some information is not available on older processors.
|
|
.SS Options
|
|
Options can be specified with a single or double '-', and only as much of the option
|
|
name as necessary to disambiguate it from others is necessary. Note that options are case-sensitive.
|
|
\fB--Counter MSR#\fP shows the delta of the specified 64-bit MSR counter.
|
|
.PP
|
|
\fB--counter MSR#\fP shows the delta of the specified 32-bit MSR counter.
|
|
.PP
|
|
\fB--Dump\fP displays the raw counter values.
|
|
.PP
|
|
\fB--debug\fP displays additional system configuration information. Invoking this parameter
|
|
more than once may also enable internal turbostat debug information.
|
|
.PP
|
|
\fB--interval seconds\fP overrides the default 5-second measurement interval.
|
|
.PP
|
|
\fB--help\fP displays usage for the most common parameters.
|
|
.PP
|
|
\fB--Joules\fP displays energy in Joules, rather than dividing Joules by time to print power in Watts.
|
|
.PP
|
|
\fB--MSR MSR#\fP shows the specified 64-bit MSR value.
|
|
.PP
|
|
\fB--msr MSR#\fP shows the specified 32-bit MSR value.
|
|
.PP
|
|
\fB--Package\fP limits output to the system summary plus the 1st thread in each Package.
|
|
.PP
|
|
\fB--processor\fP limits output to the system summary plus the 1st thread in each processor of each package. Ie. it skips hyper-threaded siblings.
|
|
.PP
|
|
\fB--Summary\fP limits output to a 1-line System Summary for each interval.
|
|
.PP
|
|
\fB--TCC temperature\fP sets the Thermal Control Circuit temperature for systems which do not export that value. This is used for making sense of the Digital Thermal Sensor outputs, as they return degrees Celsius below the TCC activation temperature.
|
|
.PP
|
|
\fB--version\fP displays the version.
|
|
.PP
|
|
The \fBcommand\fP parameter forks \fBcommand\fP, and upon its exit,
|
|
displays the statistics gathered since it was forked.
|
|
.PP
|
|
.SH DEFAULT FIELD DESCRIPTIONS
|
|
.nf
|
|
\fBCPU\fP Linux CPU (logical processor) number. Yes, it is okay that on many systems the CPUs are not listed in numerical order -- for efficiency reasons, turbostat runs in topology order, so HT siblings appear together.
|
|
\fBAVG_MHz\fP number of cycles executed divided by time elapsed.
|
|
\fB%Busy\fP percent of the interval that the CPU retired instructions, aka. % of time in "C0" state.
|
|
\fBBzy_MHz\fP average clock rate while the CPU was busy (in "c0" state).
|
|
\fBTSC_MHz\fP average MHz that the TSC ran during the entire interval.
|
|
.fi
|
|
.PP
|
|
.SH DEBUG FIELD DESCRIPTIONS
|
|
.nf
|
|
\fBPackage\fP processor package number.
|
|
\fBCore\fP processor core number.
|
|
Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading Technology (HT).
|
|
\fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states.
|
|
\fBCoreTmp\fP Degrees Celsius reported by the per-core Digital Thermal Sensor.
|
|
\fBPkgTtmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor.
|
|
\fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states.
|
|
\fBPkgWatt\fP Watts consumed by the whole package.
|
|
\fBCorWatt\fP Watts consumed by the core part of the package.
|
|
\fBGFXWatt\fP Watts consumed by the Graphics part of the package -- available only on client processors.
|
|
\fBRAMWatt\fP Watts consumed by the DRAM DIMMS -- available only on server processors.
|
|
\fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package.
|
|
\fBRAM_%\fP percent of the interval that RAPL throttling was active on DRAM.
|
|
.fi
|
|
.PP
|
|
.SH EXAMPLE
|
|
Without any parameters, turbostat displays statistics ever 5 seconds.
|
|
(override interval with "-i sec" option, or specify a command
|
|
for turbostat to fork).
|
|
.nf
|
|
[root@hsw]# ./turbostat
|
|
CPU Avg_MHz %Busy Bzy_MHz TSC_MHz
|
|
- 488 12.51 3898 3498
|
|
0 0 0.01 3885 3498
|
|
4 3897 99.99 3898 3498
|
|
1 0 0.00 3861 3498
|
|
5 0 0.00 3882 3498
|
|
2 1 0.02 3894 3498
|
|
6 2 0.06 3898 3498
|
|
3 0 0.00 3849 3498
|
|
7 0 0.00 3877 3498
|
|
|
|
.fi
|
|
.SH DEBUG EXAMPLE
|
|
The "--debug" option prints additional system information before measurements:
|
|
|
|
The first row of statistics is a summary for the entire system.
|
|
For residency % columns, the summary is a weighted average.
|
|
For Temperature columns, the summary is the column maximum.
|
|
For Watts columns, the summary is a system total.
|
|
Subsequent rows show per-CPU statistics.
|
|
.nf
|
|
turbostat version 4.1 10-Feb, 2015 - Len Brown <lenb@kernel.org>
|
|
CPUID(0): GenuineIntel 13 CPUID levels; family:model:stepping 0x6:3c:3 (6:60:3)
|
|
CPUID(6): APERF, DTS, PTM, EPB
|
|
RAPL: 3121 sec. Joule Counter Range, at 84 Watts
|
|
cpu0: MSR_NHM_PLATFORM_INFO: 0x80838f3012300
|
|
8 * 100 = 800 MHz max efficiency
|
|
35 * 100 = 3500 MHz TSC frequency
|
|
cpu0: MSR_IA32_POWER_CTL: 0x0004005d (C1E auto-promotion: DISabled)
|
|
cpu0: MSR_NHM_SNB_PKG_CST_CFG_CTL: 0x1e000400 (UNdemote-C3, UNdemote-C1, demote-C3, demote-C1, UNlocked: pkg-cstate-limit=0: pc0)
|
|
cpu0: MSR_NHM_TURBO_RATIO_LIMIT: 0x25262727
|
|
37 * 100 = 3700 MHz max turbo 4 active cores
|
|
38 * 100 = 3800 MHz max turbo 3 active cores
|
|
39 * 100 = 3900 MHz max turbo 2 active cores
|
|
39 * 100 = 3900 MHz max turbo 1 active cores
|
|
cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x00000006 (balanced)
|
|
cpu0: MSR_CORE_PERF_LIMIT_REASONS, 0x31200000 (Active: ) (Logged: Auto-HWP, Amps, MultiCoreTurbo, Transitions, )
|
|
cpu0: MSR_GFX_PERF_LIMIT_REASONS, 0x00000000 (Active: ) (Logged: )
|
|
cpu0: MSR_RING_PERF_LIMIT_REASONS, 0x0d000000 (Active: ) (Logged: Amps, PkgPwrL1, PkgPwrL2, )
|
|
cpu0: MSR_RAPL_POWER_UNIT: 0x000a0e03 (0.125000 Watts, 0.000061 Joules, 0.000977 sec.)
|
|
cpu0: MSR_PKG_POWER_INFO: 0x000002a0 (84 W TDP, RAPL 0 - 0 W, 0.000000 sec.)
|
|
cpu0: MSR_PKG_POWER_LIMIT: 0x428348001a82a0 (UNlocked)
|
|
cpu0: PKG Limit #1: ENabled (84.000000 Watts, 8.000000 sec, clamp DISabled)
|
|
cpu0: PKG Limit #2: ENabled (105.000000 Watts, 0.002441* sec, clamp DISabled)
|
|
cpu0: MSR_PP0_POLICY: 0
|
|
cpu0: MSR_PP0_POWER_LIMIT: 0x00000000 (UNlocked)
|
|
cpu0: Cores Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled)
|
|
cpu0: MSR_PP1_POLICY: 0
|
|
cpu0: MSR_PP1_POWER_LIMIT: 0x00000000 (UNlocked)
|
|
cpu0: GFX Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled)
|
|
cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00641400 (100 C)
|
|
cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x88340800 (48 C)
|
|
cpu0: MSR_IA32_THERM_STATUS: 0x88340000 (48 C +/- 1)
|
|
cpu1: MSR_IA32_THERM_STATUS: 0x88440000 (32 C +/- 1)
|
|
cpu2: MSR_IA32_THERM_STATUS: 0x88450000 (31 C +/- 1)
|
|
cpu3: MSR_IA32_THERM_STATUS: 0x88490000 (27 C +/- 1)
|
|
Core CPU Avg_MHz %Busy Bzy_MHz TSC_MHz SMI CPU%c1 CPU%c3 CPU%c6 CPU%c7 CoreTmp PkgTmp PkgWatt CorWatt GFXWatt
|
|
- - 493 12.64 3898 3498 0 12.64 0.00 0.00 74.72 47 47 21.62 13.74 0.00
|
|
0 0 4 0.11 3894 3498 0 99.89 0.00 0.00 0.00 47 47 21.62 13.74 0.00
|
|
0 4 3897 99.98 3898 3498 0 0.02
|
|
1 1 7 0.17 3887 3498 0 0.04 0.00 0.00 99.79 32
|
|
1 5 0 0.00 3885 3498 0 0.21
|
|
2 2 29 0.76 3895 3498 0 0.10 0.01 0.01 99.13 32
|
|
2 6 2 0.06 3896 3498 0 0.80
|
|
3 3 1 0.02 3832 3498 0 0.03 0.00 0.00 99.95 28
|
|
3 7 0 0.00 3879 3498 0 0.04
|
|
^C
|
|
|
|
.fi
|
|
The \fBmax efficiency\fP frequency, a.k.a. Low Frequency Mode, is the frequency
|
|
available at the minimum package voltage. The \fBTSC frequency\fP is the base
|
|
frequency of the processor -- this should match the brand string
|
|
in /proc/cpuinfo. This base frequency
|
|
should be sustainable on all CPUs indefinitely, given nominal power and cooling.
|
|
The remaining rows show what maximum turbo frequency is possible
|
|
depending on the number of idle cores. Note that not all information is
|
|
available on all processors.
|
|
.PP
|
|
The --debug option adds additional columns to the measurement ouput, including CPU idle power-state residency processor temperature sensor readinds.
|
|
See the field definitions above.
|
|
.SH FORK EXAMPLE
|
|
If turbostat is invoked with a command, it will fork that command
|
|
and output the statistics gathered when the command exits.
|
|
eg. Here a cycle soaker is run on 1 CPU (see %c0) for a few seconds
|
|
until ^C while the other CPUs are mostly idle:
|
|
|
|
.nf
|
|
root@hsw: turbostat cat /dev/zero > /dev/null
|
|
^C
|
|
CPU Avg_MHz %Busy Bzy_MHz TSC_MHz
|
|
- 482 12.51 3854 3498
|
|
0 0 0.01 1960 3498
|
|
4 0 0.00 2128 3498
|
|
1 0 0.00 3003 3498
|
|
5 3854 99.98 3855 3498
|
|
2 0 0.01 3504 3498
|
|
6 3 0.08 3884 3498
|
|
3 0 0.00 2553 3498
|
|
7 0 0.00 2126 3498
|
|
10.783983 sec
|
|
|
|
.fi
|
|
Above the cycle soaker drives cpu5 up its 3.9 GHz turbo limit.
|
|
The first row shows the average MHz and %Busy across all the processors in the system.
|
|
|
|
Note that the Avg_MHz column reflects the total number of cycles executed
|
|
divided by the measurement interval. If the %Busy column is 100%,
|
|
then the processor was running at that speed the entire interval.
|
|
The Avg_MHz multiplied by the %Busy results in the Bzy_MHz --
|
|
which is the average frequency while the processor was executing --
|
|
not including any non-busy idle time.
|
|
|
|
.SH NOTES
|
|
|
|
.B "turbostat "
|
|
must be run as root.
|
|
Alternatively, non-root users can be enabled to run turbostat this way:
|
|
|
|
# setcap cap_sys_rawio=ep ./turbostat
|
|
|
|
# chmod +r /dev/cpu/*/msr
|
|
|
|
.B "turbostat "
|
|
reads hardware counters, but doesn't write them.
|
|
So it will not interfere with the OS or other programs, including
|
|
multiple invocations of itself.
|
|
|
|
\fBturbostat \fP
|
|
may work poorly on Linux-2.6.20 through 2.6.29,
|
|
as \fBacpi-cpufreq \fPperiodically cleared the APERF and MPERF MSRs
|
|
in those kernels.
|
|
|
|
AVG_MHz = APERF_delta/measurement_interval. This is the actual
|
|
number of elapsed cycles divided by the entire sample interval --
|
|
including idle time. Note that this calculation is resilient
|
|
to systems lacking a non-stop TSC.
|
|
|
|
TSC_MHz = TSC_delta/measurement_interval.
|
|
On a system with an invariant TSC, this value will be constant
|
|
and will closely match the base frequency value shown
|
|
in the brand string in /proc/cpuinfo. On a system where
|
|
the TSC stops in idle, TSC_MHz will drop
|
|
below the processor's base frequency.
|
|
|
|
%Busy = MPERF_delta/TSC_delta
|
|
|
|
Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/measurement_interval
|
|
|
|
Note that these calculations depend on TSC_delta, so they
|
|
are not reliable during intervals when TSC_MHz is not running at the base frequency.
|
|
|
|
Turbostat data collection is not atomic.
|
|
Extremely short measurement intervals (much less than 1 second),
|
|
or system activity that prevents turbostat from being able
|
|
to run on all CPUS to quickly collect data, will result in
|
|
inconsistent results.
|
|
|
|
The APERF, MPERF MSRs are defined to count non-halted cycles.
|
|
Although it is not guaranteed by the architecture, turbostat assumes
|
|
that they count at TSC rate, which is true on all processors tested to date.
|
|
|
|
.SH REFERENCES
|
|
Volume 3B: System Programming Guide"
|
|
http://www.intel.com/products/processor/manuals/
|
|
|
|
.SH FILES
|
|
.ta
|
|
.nf
|
|
/dev/cpu/*/msr
|
|
.fi
|
|
|
|
.SH "SEE ALSO"
|
|
msr(4), vmstat(8)
|
|
.PP
|
|
.SH AUTHOR
|
|
.nf
|
|
Written by Len Brown <len.brown@intel.com>
|