linux_dsm_epyc7002/drivers/usb/serial
Bjørn Mork a2a2d6c7f9 USB: option: add a D-Link DWM-156 variant
Adding support for a Mediatek based device labelled as
D-Link Model: DWM-156, H/W Ver: A7

Also adding two other device IDs found in the Debian(!)
packages included on the embedded device driver CD.

This is a composite MBIM + serial ports + card reader device:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2001 ProdID=7d01 Rev= 3.00
S:  Manufacturer=D-Link,Inc
S:  Product=D-Link DWM-156
C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=500us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09 16:38:05 -07:00
..
aircable.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
ark3116.c USB: ark3116: switch to generic TIOCMIWAIT implementation 2013-03-25 13:50:52 -07:00
belkin_sa.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
belkin_sa.h
bus.c USB: serial: clean up usb-serial bus device removal 2013-03-25 13:48:27 -07:00
ch341.c USB: ch341: fix TIOCMIWAIT and disconnect 2013-03-25 13:50:52 -07:00
console.c USB merge for 3.7-rc1 2012-10-01 13:23:01 -07:00
cp210x.c USB: cp210x: always disable uart on close 2013-03-25 13:54:30 -07:00
cyberjack.c USB: cyberjack: fix disconnect handling 2013-03-25 13:48:26 -07:00
cypress_m8.c USB: cypress_m8: remove bogus disconnect test from close 2013-03-25 13:54:30 -07:00
cypress_m8.h
digi_acceleport.c USB: digi_acceleport: remove unused MSR-wait queue 2013-03-25 13:50:52 -07:00
empeg.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
ezusb_convert.pl
f81232.c USB: f81232: fix TIOCMIWAIT and disconnect 2013-03-25 13:50:52 -07:00
ftdi_sio_ids.h USB: add ftdi_sio USB ID for GDM Boost V1.x 2013-04-08 09:08:35 -07:00
ftdi_sio.c USB: add ftdi_sio USB ID for GDM Boost V1.x 2013-04-08 09:08:35 -07:00
ftdi_sio.h USB: ftdi_sio: add support for FT-X series devices 2012-03-14 15:43:05 -07:00
funsoft.c USB: serial: funsoft.c: remove debug module parameter 2012-09-14 12:31:27 -07:00
garmin_gps.c USB: garmin_gps: remove bogus disconnect test in bulk callback 2013-03-25 13:54:32 -07:00
generic.c USB: serial: update copyright information 2013-03-25 13:54:32 -07:00
hp4x.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
io_16654.h
io_edgeport.c USB: io_edgeport: switch to generic TIOCMIWAIT implementation 2013-03-25 13:50:53 -07:00
io_edgeport.h
io_ionsp.h
io_tables.h USB: io_edgeport: switch to generic TIOCMIWAIT implementation 2013-03-25 13:50:53 -07:00
io_ti.c USB: io_ti, stop dereferencing potential NULL 2013-04-05 15:38:30 -07:00
io_ti.h
io_usbvend.h
ipaq.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
ipw.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
ir-usb.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
iuu_phoenix.c USB: iuu_phoenix: remove bogus disconnect test in close 2013-03-25 13:54:32 -07:00
iuu_phoenix.h
Kconfig tty/serial patches for 3.9-rc1 2013-02-21 13:41:04 -08:00
keyspan_pda.c USB: keyspan_pda: remove bogus disconnect test in close 2013-03-25 13:44:18 -07:00
keyspan_usa26msg.h
keyspan_usa28msg.h
keyspan_usa49msg.h
keyspan_usa67msg.h
keyspan_usa90msg.h
keyspan.c USB: keyspan: add a sanity test on "len" 2013-04-05 14:11:25 -07:00
keyspan.h USB: keyspan: fix NULL-pointer dereferences and memory leaks 2012-10-25 09:37:13 -07:00
kl5kusb105.c USB: kl5kusb105: always disable uart on close 2013-03-25 13:54:31 -07:00
kl5kusb105.h
kobil_sct.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
kobil_sct.h
Makefile usb: add driver for xsens motion trackers 2013-01-25 09:56:54 -08:00
Makefile-keyspan_pda_fw
mct_u232.c USB: mct_u232: switch to generic TIOCMIWAIT implementation 2013-03-25 13:50:53 -07:00
mct_u232.h
metro-usb.c USB: metro-usb: always disable uart on close 2013-03-25 13:54:31 -07:00
mos7720.c USB: mos7720: always disable uart on close 2013-03-25 13:54:31 -07:00
mos7840.c USB: mos7840: switch to generic TIOCMIWAIT implementation 2013-03-25 13:52:24 -07:00
moto_modem.c USB: serial: rework usb_serial_register/deregister_drivers() 2012-05-08 15:46:14 -07:00
navman.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
omninet.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
opticon.c USB: opticon: remove disconnect test from tiocmset 2013-03-25 13:54:31 -07:00
option.c USB: option: add a D-Link DWM-156 variant 2013-04-09 16:38:05 -07:00
oti6858.c USB: oti6858: fix TIOCMIWAIT and disconnect 2013-03-25 13:52:25 -07:00
oti6858.h
pl2303.c USB: pl2303: remove disconnect test from tiocmset 2013-03-25 13:54:32 -07:00
pl2303.h USB: serial: pl2303: rm duplicate id 2011-11-15 10:06:15 -08:00
qcaux.c qcaux: add Franklin U600 2013-03-11 11:09:17 -07:00
qcserial.c qcserial: bind to DM/DIAG port on Gobi 1K devices 2013-03-13 08:50:42 -07:00
quatech2.c USB: quatech2: always disable uart on close 2013-03-25 13:54:32 -07:00
safe_serial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
siemens_mpi.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
sierra.c USB: sierra: remove bogus disconnect test in close 2013-03-25 13:44:18 -07:00
spcp8x5.c USB: spcp8x5: add proper modem-status support 2013-03-25 13:52:28 -07:00
ssu100.c USB: ssu100: switch to generic TIOCMIWAIT implementation 2013-03-25 13:52:28 -07:00
symbolserial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
ti_usb_3410_5052.c USB: ti_usb_3410_5052: switch to generic TIOCMIWAIT implementation 2013-03-25 13:52:28 -07:00
ti_usb_3410_5052.h USB: serial: ti_usb_3410_5052: Add support for the FRI2 serial console 2012-05-11 15:14:07 -07:00
usb_debug.c USB: serial: rework usb_serial_register/deregister_drivers() 2012-05-08 15:46:14 -07:00
usb_wwan.c USB: usb_wwan: remove bogus disconnect test in close 2013-03-25 13:44:18 -07:00
usb-serial.c Revert "USB: serial: fix hang when opening port" 2013-03-28 11:02:24 -07:00
usb-wwan.h USB: usb-wwan: fix multiple memory leaks in error paths 2012-10-25 09:37:13 -07:00
visor.c USB: visor: always disable uart on close 2013-03-25 13:54:32 -07:00
visor.h
vivopay-serial.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
whiteheat.c USB: whiteheat: fix port-data memory leak 2012-10-25 09:36:57 -07:00
whiteheat.h
xsens_mt.c usb: add driver for xsens motion trackers 2013-01-25 09:56:54 -08:00
zio.c USB: serial: rework usb_serial_register/deregister_drivers() 2012-05-08 15:46:14 -07:00
zte_ev.c USB: serial: add zte_ev.c driver 2012-09-13 10:15:14 -07:00