linux_dsm_epyc7002/arch/powerpc/kvm/book3s_hv_rmhandlers.S
Paul Mackerras a29ebeaf55 KVM: PPC: Book3S HV: Invalidate TLB on radix guest vcpu movement
With radix, the guest can do TLB invalidations itself using the tlbie
(global) and tlbiel (local) TLB invalidation instructions.  Linux guests
use local TLB invalidations for translations that have only ever been
accessed on one vcpu.  However, that doesn't mean that the translations
have only been accessed on one physical cpu (pcpu) since vcpus can move
around from one pcpu to another.  Thus a tlbiel might leave behind stale
TLB entries on a pcpu where the vcpu previously ran, and if that task
then moves back to that previous pcpu, it could see those stale TLB
entries and thus access memory incorrectly.  The usual symptom of this
is random segfaults in userspace programs in the guest.

To cope with this, we detect when a vcpu is about to start executing on
a thread in a core that is a different core from the last time it
executed.  If that is the case, then we mark the core as needing a
TLB flush and then send an interrupt to any thread in the core that is
currently running a vcpu from the same guest.  This will get those vcpus
out of the guest, and the first one to re-enter the guest will do the
TLB flush.  The reason for interrupting the vcpus executing on the old
core is to cope with the following scenario:

	CPU 0			CPU 1			CPU 4
	(core 0)			(core 0)			(core 1)

	VCPU 0 runs task X      VCPU 1 runs
	core 0 TLB gets
	entries from task X
	VCPU 0 moves to CPU 4
							VCPU 0 runs task X
							Unmap pages of task X
							tlbiel

				(still VCPU 1)			task X moves to VCPU 1
				task X runs
				task X sees stale TLB
				entries

That is, as soon as the VCPU starts executing on the new core, it
could unmap and tlbiel some page table entries, and then the task
could migrate to one of the VCPUs running on the old core and
potentially see stale TLB entries.

Since the TLB is shared between all the threads in a core, we only
use the bit of kvm->arch.need_tlb_flush corresponding to the first
thread in the core.  To ensure that we don't have a window where we
can miss a flush, this moves the clearing of the bit from before the
actual flush to after it.  This way, two threads might both do the
flush, but we prevent the situation where one thread can enter the
guest before the flush is finished.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-31 19:11:51 +11:00

2982 lines
71 KiB
ArmAsm

/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Copyright 2011 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
*
* Derived from book3s_rmhandlers.S and other files, which are:
*
* Copyright SUSE Linux Products GmbH 2009
*
* Authors: Alexander Graf <agraf@suse.de>
*/
#include <asm/ppc_asm.h>
#include <asm/kvm_asm.h>
#include <asm/reg.h>
#include <asm/mmu.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/hvcall.h>
#include <asm/asm-offsets.h>
#include <asm/exception-64s.h>
#include <asm/kvm_book3s_asm.h>
#include <asm/book3s/64/mmu-hash.h>
#include <asm/tm.h>
#include <asm/opal.h>
#define VCPU_GPRS_TM(reg) (((reg) * ULONG_SIZE) + VCPU_GPR_TM)
/* Values in HSTATE_NAPPING(r13) */
#define NAPPING_CEDE 1
#define NAPPING_NOVCPU 2
/*
* Call kvmppc_hv_entry in real mode.
* Must be called with interrupts hard-disabled.
*
* Input Registers:
*
* LR = return address to continue at after eventually re-enabling MMU
*/
_GLOBAL_TOC(kvmppc_hv_entry_trampoline)
mflr r0
std r0, PPC_LR_STKOFF(r1)
stdu r1, -112(r1)
mfmsr r10
LOAD_REG_ADDR(r5, kvmppc_call_hv_entry)
li r0,MSR_RI
andc r0,r10,r0
li r6,MSR_IR | MSR_DR
andc r6,r10,r6
mtmsrd r0,1 /* clear RI in MSR */
mtsrr0 r5
mtsrr1 r6
RFI
kvmppc_call_hv_entry:
ld r4, HSTATE_KVM_VCPU(r13)
bl kvmppc_hv_entry
/* Back from guest - restore host state and return to caller */
BEGIN_FTR_SECTION
/* Restore host DABR and DABRX */
ld r5,HSTATE_DABR(r13)
li r6,7
mtspr SPRN_DABR,r5
mtspr SPRN_DABRX,r6
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
/* Restore SPRG3 */
ld r3,PACA_SPRG_VDSO(r13)
mtspr SPRN_SPRG_VDSO_WRITE,r3
/* Reload the host's PMU registers */
ld r3, PACALPPACAPTR(r13) /* is the host using the PMU? */
lbz r4, LPPACA_PMCINUSE(r3)
cmpwi r4, 0
beq 23f /* skip if not */
BEGIN_FTR_SECTION
ld r3, HSTATE_MMCR0(r13)
andi. r4, r3, MMCR0_PMAO_SYNC | MMCR0_PMAO
cmpwi r4, MMCR0_PMAO
beql kvmppc_fix_pmao
END_FTR_SECTION_IFSET(CPU_FTR_PMAO_BUG)
lwz r3, HSTATE_PMC1(r13)
lwz r4, HSTATE_PMC2(r13)
lwz r5, HSTATE_PMC3(r13)
lwz r6, HSTATE_PMC4(r13)
lwz r8, HSTATE_PMC5(r13)
lwz r9, HSTATE_PMC6(r13)
mtspr SPRN_PMC1, r3
mtspr SPRN_PMC2, r4
mtspr SPRN_PMC3, r5
mtspr SPRN_PMC4, r6
mtspr SPRN_PMC5, r8
mtspr SPRN_PMC6, r9
ld r3, HSTATE_MMCR0(r13)
ld r4, HSTATE_MMCR1(r13)
ld r5, HSTATE_MMCRA(r13)
ld r6, HSTATE_SIAR(r13)
ld r7, HSTATE_SDAR(r13)
mtspr SPRN_MMCR1, r4
mtspr SPRN_MMCRA, r5
mtspr SPRN_SIAR, r6
mtspr SPRN_SDAR, r7
BEGIN_FTR_SECTION
ld r8, HSTATE_MMCR2(r13)
ld r9, HSTATE_SIER(r13)
mtspr SPRN_MMCR2, r8
mtspr SPRN_SIER, r9
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
mtspr SPRN_MMCR0, r3
isync
23:
/*
* Reload DEC. HDEC interrupts were disabled when
* we reloaded the host's LPCR value.
*/
ld r3, HSTATE_DECEXP(r13)
mftb r4
subf r4, r4, r3
mtspr SPRN_DEC, r4
/* hwthread_req may have got set by cede or no vcpu, so clear it */
li r0, 0
stb r0, HSTATE_HWTHREAD_REQ(r13)
/*
* For external and machine check interrupts, we need
* to call the Linux handler to process the interrupt.
* We do that by jumping to absolute address 0x500 for
* external interrupts, or the machine_check_fwnmi label
* for machine checks (since firmware might have patched
* the vector area at 0x200). The [h]rfid at the end of the
* handler will return to the book3s_hv_interrupts.S code.
* For other interrupts we do the rfid to get back
* to the book3s_hv_interrupts.S code here.
*/
ld r8, 112+PPC_LR_STKOFF(r1)
addi r1, r1, 112
ld r7, HSTATE_HOST_MSR(r13)
cmpwi cr1, r12, BOOK3S_INTERRUPT_MACHINE_CHECK
cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL
beq 11f
cmpwi r12, BOOK3S_INTERRUPT_H_DOORBELL
beq 15f /* Invoke the H_DOORBELL handler */
cmpwi cr2, r12, BOOK3S_INTERRUPT_HMI
beq cr2, 14f /* HMI check */
/* RFI into the highmem handler, or branch to interrupt handler */
mfmsr r6
li r0, MSR_RI
andc r6, r6, r0
mtmsrd r6, 1 /* Clear RI in MSR */
mtsrr0 r8
mtsrr1 r7
beq cr1, 13f /* machine check */
RFI
/* On POWER7, we have external interrupts set to use HSRR0/1 */
11: mtspr SPRN_HSRR0, r8
mtspr SPRN_HSRR1, r7
ba 0x500
13: b machine_check_fwnmi
14: mtspr SPRN_HSRR0, r8
mtspr SPRN_HSRR1, r7
b hmi_exception_after_realmode
15: mtspr SPRN_HSRR0, r8
mtspr SPRN_HSRR1, r7
ba 0xe80
kvmppc_primary_no_guest:
/* We handle this much like a ceded vcpu */
/* put the HDEC into the DEC, since HDEC interrupts don't wake us */
mfspr r3, SPRN_HDEC
mtspr SPRN_DEC, r3
/*
* Make sure the primary has finished the MMU switch.
* We should never get here on a secondary thread, but
* check it for robustness' sake.
*/
ld r5, HSTATE_KVM_VCORE(r13)
65: lbz r0, VCORE_IN_GUEST(r5)
cmpwi r0, 0
beq 65b
/* Set LPCR. */
ld r8,VCORE_LPCR(r5)
mtspr SPRN_LPCR,r8
isync
/* set our bit in napping_threads */
ld r5, HSTATE_KVM_VCORE(r13)
lbz r7, HSTATE_PTID(r13)
li r0, 1
sld r0, r0, r7
addi r6, r5, VCORE_NAPPING_THREADS
1: lwarx r3, 0, r6
or r3, r3, r0
stwcx. r3, 0, r6
bne 1b
/* order napping_threads update vs testing entry_exit_map */
isync
li r12, 0
lwz r7, VCORE_ENTRY_EXIT(r5)
cmpwi r7, 0x100
bge kvm_novcpu_exit /* another thread already exiting */
li r3, NAPPING_NOVCPU
stb r3, HSTATE_NAPPING(r13)
li r3, 0 /* Don't wake on privileged (OS) doorbell */
b kvm_do_nap
/*
* kvm_novcpu_wakeup
* Entered from kvm_start_guest if kvm_hstate.napping is set
* to NAPPING_NOVCPU
* r2 = kernel TOC
* r13 = paca
*/
kvm_novcpu_wakeup:
ld r1, HSTATE_HOST_R1(r13)
ld r5, HSTATE_KVM_VCORE(r13)
li r0, 0
stb r0, HSTATE_NAPPING(r13)
/* check the wake reason */
bl kvmppc_check_wake_reason
/*
* Restore volatile registers since we could have called
* a C routine in kvmppc_check_wake_reason.
* r5 = VCORE
*/
ld r5, HSTATE_KVM_VCORE(r13)
/* see if any other thread is already exiting */
lwz r0, VCORE_ENTRY_EXIT(r5)
cmpwi r0, 0x100
bge kvm_novcpu_exit
/* clear our bit in napping_threads */
lbz r7, HSTATE_PTID(r13)
li r0, 1
sld r0, r0, r7
addi r6, r5, VCORE_NAPPING_THREADS
4: lwarx r7, 0, r6
andc r7, r7, r0
stwcx. r7, 0, r6
bne 4b
/* See if the wake reason means we need to exit */
cmpdi r3, 0
bge kvm_novcpu_exit
/* See if our timeslice has expired (HDEC is negative) */
mfspr r0, SPRN_HDEC
li r12, BOOK3S_INTERRUPT_HV_DECREMENTER
cmpwi r0, 0
blt kvm_novcpu_exit
/* Got an IPI but other vcpus aren't yet exiting, must be a latecomer */
ld r4, HSTATE_KVM_VCPU(r13)
cmpdi r4, 0
beq kvmppc_primary_no_guest
#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
addi r3, r4, VCPU_TB_RMENTRY
bl kvmhv_start_timing
#endif
b kvmppc_got_guest
kvm_novcpu_exit:
#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
ld r4, HSTATE_KVM_VCPU(r13)
cmpdi r4, 0
beq 13f
addi r3, r4, VCPU_TB_RMEXIT
bl kvmhv_accumulate_time
#endif
13: mr r3, r12
stw r12, 112-4(r1)
bl kvmhv_commence_exit
nop
lwz r12, 112-4(r1)
b kvmhv_switch_to_host
/*
* We come in here when wakened from nap mode.
* Relocation is off and most register values are lost.
* r13 points to the PACA.
*/
.globl kvm_start_guest
kvm_start_guest:
/* Set runlatch bit the minute you wake up from nap */
mfspr r0, SPRN_CTRLF
ori r0, r0, 1
mtspr SPRN_CTRLT, r0
ld r2,PACATOC(r13)
li r0,KVM_HWTHREAD_IN_KVM
stb r0,HSTATE_HWTHREAD_STATE(r13)
/* NV GPR values from power7_idle() will no longer be valid */
li r0,1
stb r0,PACA_NAPSTATELOST(r13)
/* were we napping due to cede? */
lbz r0,HSTATE_NAPPING(r13)
cmpwi r0,NAPPING_CEDE
beq kvm_end_cede
cmpwi r0,NAPPING_NOVCPU
beq kvm_novcpu_wakeup
ld r1,PACAEMERGSP(r13)
subi r1,r1,STACK_FRAME_OVERHEAD
/*
* We weren't napping due to cede, so this must be a secondary
* thread being woken up to run a guest, or being woken up due
* to a stray IPI. (Or due to some machine check or hypervisor
* maintenance interrupt while the core is in KVM.)
*/
/* Check the wake reason in SRR1 to see why we got here */
bl kvmppc_check_wake_reason
/*
* kvmppc_check_wake_reason could invoke a C routine, but we
* have no volatile registers to restore when we return.
*/
cmpdi r3, 0
bge kvm_no_guest
/* get vcore pointer, NULL if we have nothing to run */
ld r5,HSTATE_KVM_VCORE(r13)
cmpdi r5,0
/* if we have no vcore to run, go back to sleep */
beq kvm_no_guest
kvm_secondary_got_guest:
/* Set HSTATE_DSCR(r13) to something sensible */
ld r6, PACA_DSCR_DEFAULT(r13)
std r6, HSTATE_DSCR(r13)
/* On thread 0 of a subcore, set HDEC to max */
lbz r4, HSTATE_PTID(r13)
cmpwi r4, 0
bne 63f
lis r6, 0x7fff
ori r6, r6, 0xffff
mtspr SPRN_HDEC, r6
/* and set per-LPAR registers, if doing dynamic micro-threading */
ld r6, HSTATE_SPLIT_MODE(r13)
cmpdi r6, 0
beq 63f
ld r0, KVM_SPLIT_RPR(r6)
mtspr SPRN_RPR, r0
ld r0, KVM_SPLIT_PMMAR(r6)
mtspr SPRN_PMMAR, r0
ld r0, KVM_SPLIT_LDBAR(r6)
mtspr SPRN_LDBAR, r0
isync
63:
/* Order load of vcpu after load of vcore */
lwsync
ld r4, HSTATE_KVM_VCPU(r13)
bl kvmppc_hv_entry
/* Back from the guest, go back to nap */
/* Clear our vcpu and vcore pointers so we don't come back in early */
li r0, 0
std r0, HSTATE_KVM_VCPU(r13)
/*
* Once we clear HSTATE_KVM_VCORE(r13), the code in
* kvmppc_run_core() is going to assume that all our vcpu
* state is visible in memory. This lwsync makes sure
* that that is true.
*/
lwsync
std r0, HSTATE_KVM_VCORE(r13)
/*
* All secondaries exiting guest will fall through this path.
* Before proceeding, just check for HMI interrupt and
* invoke opal hmi handler. By now we are sure that the
* primary thread on this core/subcore has already made partition
* switch/TB resync and we are good to call opal hmi handler.
*/
cmpwi r12, BOOK3S_INTERRUPT_HMI
bne kvm_no_guest
li r3,0 /* NULL argument */
bl hmi_exception_realmode
/*
* At this point we have finished executing in the guest.
* We need to wait for hwthread_req to become zero, since
* we may not turn on the MMU while hwthread_req is non-zero.
* While waiting we also need to check if we get given a vcpu to run.
*/
kvm_no_guest:
lbz r3, HSTATE_HWTHREAD_REQ(r13)
cmpwi r3, 0
bne 53f
HMT_MEDIUM
li r0, KVM_HWTHREAD_IN_KERNEL
stb r0, HSTATE_HWTHREAD_STATE(r13)
/* need to recheck hwthread_req after a barrier, to avoid race */
sync
lbz r3, HSTATE_HWTHREAD_REQ(r13)
cmpwi r3, 0
bne 54f
/*
* We jump to pnv_wakeup_loss, which will return to the caller
* of power7_nap in the powernv cpu offline loop. The value we
* put in r3 becomes the return value for power7_nap.
*/
li r3, LPCR_PECE0
mfspr r4, SPRN_LPCR
rlwimi r4, r3, 0, LPCR_PECE0 | LPCR_PECE1
mtspr SPRN_LPCR, r4
li r3, 0
b pnv_wakeup_loss
53: HMT_LOW
ld r5, HSTATE_KVM_VCORE(r13)
cmpdi r5, 0
bne 60f
ld r3, HSTATE_SPLIT_MODE(r13)
cmpdi r3, 0
beq kvm_no_guest
lbz r0, KVM_SPLIT_DO_NAP(r3)
cmpwi r0, 0
beq kvm_no_guest
HMT_MEDIUM
b kvm_unsplit_nap
60: HMT_MEDIUM
b kvm_secondary_got_guest
54: li r0, KVM_HWTHREAD_IN_KVM
stb r0, HSTATE_HWTHREAD_STATE(r13)
b kvm_no_guest
/*
* Here the primary thread is trying to return the core to
* whole-core mode, so we need to nap.
*/
kvm_unsplit_nap:
/*
* When secondaries are napping in kvm_unsplit_nap() with
* hwthread_req = 1, HMI goes ignored even though subcores are
* already exited the guest. Hence HMI keeps waking up secondaries
* from nap in a loop and secondaries always go back to nap since
* no vcore is assigned to them. This makes impossible for primary
* thread to get hold of secondary threads resulting into a soft
* lockup in KVM path.
*
* Let us check if HMI is pending and handle it before we go to nap.
*/
cmpwi r12, BOOK3S_INTERRUPT_HMI
bne 55f
li r3, 0 /* NULL argument */
bl hmi_exception_realmode
55:
/*
* Ensure that secondary doesn't nap when it has
* its vcore pointer set.
*/
sync /* matches smp_mb() before setting split_info.do_nap */
ld r0, HSTATE_KVM_VCORE(r13)
cmpdi r0, 0
bne kvm_no_guest
/* clear any pending message */
BEGIN_FTR_SECTION
lis r6, (PPC_DBELL_SERVER << (63-36))@h
PPC_MSGCLR(6)
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
/* Set kvm_split_mode.napped[tid] = 1 */
ld r3, HSTATE_SPLIT_MODE(r13)
li r0, 1
lhz r4, PACAPACAINDEX(r13)
clrldi r4, r4, 61 /* micro-threading => P8 => 8 threads/core */
addi r4, r4, KVM_SPLIT_NAPPED
stbx r0, r3, r4
/* Check the do_nap flag again after setting napped[] */
sync
lbz r0, KVM_SPLIT_DO_NAP(r3)
cmpwi r0, 0
beq 57f
li r3, (LPCR_PECEDH | LPCR_PECE0) >> 4
mfspr r5, SPRN_LPCR
rlwimi r5, r3, 4, (LPCR_PECEDP | LPCR_PECEDH | LPCR_PECE0 | LPCR_PECE1)
b kvm_nap_sequence
57: li r0, 0
stbx r0, r3, r4
b kvm_no_guest
/******************************************************************************
* *
* Entry code *
* *
*****************************************************************************/
/* Stack frame offsets */
#define STACK_SLOT_TID (112-16)
#define STACK_SLOT_PSSCR (112-24)
#define STACK_SLOT_PID (112-32)
.global kvmppc_hv_entry
kvmppc_hv_entry:
/* Required state:
*
* R4 = vcpu pointer (or NULL)
* MSR = ~IR|DR
* R13 = PACA
* R1 = host R1
* R2 = TOC
* all other volatile GPRS = free
* Does not preserve non-volatile GPRs or CR fields
*/
mflr r0
std r0, PPC_LR_STKOFF(r1)
stdu r1, -112(r1)
/* Save R1 in the PACA */
std r1, HSTATE_HOST_R1(r13)
li r6, KVM_GUEST_MODE_HOST_HV
stb r6, HSTATE_IN_GUEST(r13)
#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
/* Store initial timestamp */
cmpdi r4, 0
beq 1f
addi r3, r4, VCPU_TB_RMENTRY
bl kvmhv_start_timing
1:
#endif
/* Use cr7 as an indication of radix mode */
ld r5, HSTATE_KVM_VCORE(r13)
ld r9, VCORE_KVM(r5) /* pointer to struct kvm */
lbz r0, KVM_RADIX(r9)
cmpwi cr7, r0, 0
/* Clear out SLB if hash */
bne cr7, 2f
li r6,0
slbmte r6,r6
slbia
ptesync
2:
/*
* POWER7/POWER8 host -> guest partition switch code.
* We don't have to lock against concurrent tlbies,
* but we do have to coordinate across hardware threads.
*/
/* Set bit in entry map iff exit map is zero. */
li r7, 1
lbz r6, HSTATE_PTID(r13)
sld r7, r7, r6
addi r8, r5, VCORE_ENTRY_EXIT
21: lwarx r3, 0, r8
cmpwi r3, 0x100 /* any threads starting to exit? */
bge secondary_too_late /* if so we're too late to the party */
or r3, r3, r7
stwcx. r3, 0, r8
bne 21b
/* Primary thread switches to guest partition. */
cmpwi r6,0
bne 10f
lwz r7,KVM_LPID(r9)
BEGIN_FTR_SECTION
ld r6,KVM_SDR1(r9)
li r0,LPID_RSVD /* switch to reserved LPID */
mtspr SPRN_LPID,r0
ptesync
mtspr SPRN_SDR1,r6 /* switch to partition page table */
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
mtspr SPRN_LPID,r7
isync
/* See if we need to flush the TLB */
lhz r6,PACAPACAINDEX(r13) /* test_bit(cpu, need_tlb_flush) */
BEGIN_FTR_SECTION
/*
* On POWER9, individual threads can come in here, but the
* TLB is shared between the 4 threads in a core, hence
* invalidating on one thread invalidates for all.
* Thus we make all 4 threads use the same bit here.
*/
clrrdi r6,r6,2
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
clrldi r7,r6,64-6 /* extract bit number (6 bits) */
srdi r6,r6,6 /* doubleword number */
sldi r6,r6,3 /* address offset */
add r6,r6,r9
addi r6,r6,KVM_NEED_FLUSH /* dword in kvm->arch.need_tlb_flush */
li r8,1
sld r8,r8,r7
ld r7,0(r6)
and. r7,r7,r8
beq 22f
/* Flush the TLB of any entries for this LPID */
lwz r0,KVM_TLB_SETS(r9)
mtctr r0
li r7,0x800 /* IS field = 0b10 */
ptesync
li r0,0 /* RS for P9 version of tlbiel */
bne cr7, 29f
28: tlbiel r7 /* On P9, rs=0, RIC=0, PRS=0, R=0 */
addi r7,r7,0x1000
bdnz 28b
b 30f
29: PPC_TLBIEL(7,0,2,1,1) /* for radix, RIC=2, PRS=1, R=1 */
addi r7,r7,0x1000
bdnz 29b
30: ptesync
23: ldarx r7,0,r6 /* clear the bit after TLB flushed */
andc r7,r7,r8
stdcx. r7,0,r6
bne 23b
/* Add timebase offset onto timebase */
22: ld r8,VCORE_TB_OFFSET(r5)
cmpdi r8,0
beq 37f
mftb r6 /* current host timebase */
add r8,r8,r6
mtspr SPRN_TBU40,r8 /* update upper 40 bits */
mftb r7 /* check if lower 24 bits overflowed */
clrldi r6,r6,40
clrldi r7,r7,40
cmpld r7,r6
bge 37f
addis r8,r8,0x100 /* if so, increment upper 40 bits */
mtspr SPRN_TBU40,r8
/* Load guest PCR value to select appropriate compat mode */
37: ld r7, VCORE_PCR(r5)
cmpdi r7, 0
beq 38f
mtspr SPRN_PCR, r7
38:
BEGIN_FTR_SECTION
/* DPDES and VTB are shared between threads */
ld r8, VCORE_DPDES(r5)
ld r7, VCORE_VTB(r5)
mtspr SPRN_DPDES, r8
mtspr SPRN_VTB, r7
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
/* Mark the subcore state as inside guest */
bl kvmppc_subcore_enter_guest
nop
ld r5, HSTATE_KVM_VCORE(r13)
ld r4, HSTATE_KVM_VCPU(r13)
li r0,1
stb r0,VCORE_IN_GUEST(r5) /* signal secondaries to continue */
/* Do we have a guest vcpu to run? */
10: cmpdi r4, 0
beq kvmppc_primary_no_guest
kvmppc_got_guest:
/* Load up guest SLB entries (N.B. slb_max will be 0 for radix) */
lwz r5,VCPU_SLB_MAX(r4)
cmpwi r5,0
beq 9f
mtctr r5
addi r6,r4,VCPU_SLB
1: ld r8,VCPU_SLB_E(r6)
ld r9,VCPU_SLB_V(r6)
slbmte r9,r8
addi r6,r6,VCPU_SLB_SIZE
bdnz 1b
9:
/* Increment yield count if they have a VPA */
ld r3, VCPU_VPA(r4)
cmpdi r3, 0
beq 25f
li r6, LPPACA_YIELDCOUNT
LWZX_BE r5, r3, r6
addi r5, r5, 1
STWX_BE r5, r3, r6
li r6, 1
stb r6, VCPU_VPA_DIRTY(r4)
25:
/* Save purr/spurr */
mfspr r5,SPRN_PURR
mfspr r6,SPRN_SPURR
std r5,HSTATE_PURR(r13)
std r6,HSTATE_SPURR(r13)
ld r7,VCPU_PURR(r4)
ld r8,VCPU_SPURR(r4)
mtspr SPRN_PURR,r7
mtspr SPRN_SPURR,r8
/* Save host values of some registers */
BEGIN_FTR_SECTION
mfspr r5, SPRN_TIDR
mfspr r6, SPRN_PSSCR
mfspr r7, SPRN_PID
std r5, STACK_SLOT_TID(r1)
std r6, STACK_SLOT_PSSCR(r1)
std r7, STACK_SLOT_PID(r1)
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
BEGIN_FTR_SECTION
/* Set partition DABR */
/* Do this before re-enabling PMU to avoid P7 DABR corruption bug */
lwz r5,VCPU_DABRX(r4)
ld r6,VCPU_DABR(r4)
mtspr SPRN_DABRX,r5
mtspr SPRN_DABR,r6
isync
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
BEGIN_FTR_SECTION
bl kvmppc_restore_tm
END_FTR_SECTION_IFSET(CPU_FTR_TM)
#endif
/* Load guest PMU registers */
/* R4 is live here (vcpu pointer) */
li r3, 1
sldi r3, r3, 31 /* MMCR0_FC (freeze counters) bit */
mtspr SPRN_MMCR0, r3 /* freeze all counters, disable ints */
isync
BEGIN_FTR_SECTION
ld r3, VCPU_MMCR(r4)
andi. r5, r3, MMCR0_PMAO_SYNC | MMCR0_PMAO
cmpwi r5, MMCR0_PMAO
beql kvmppc_fix_pmao
END_FTR_SECTION_IFSET(CPU_FTR_PMAO_BUG)
lwz r3, VCPU_PMC(r4) /* always load up guest PMU registers */
lwz r5, VCPU_PMC + 4(r4) /* to prevent information leak */
lwz r6, VCPU_PMC + 8(r4)
lwz r7, VCPU_PMC + 12(r4)
lwz r8, VCPU_PMC + 16(r4)
lwz r9, VCPU_PMC + 20(r4)
mtspr SPRN_PMC1, r3
mtspr SPRN_PMC2, r5
mtspr SPRN_PMC3, r6
mtspr SPRN_PMC4, r7
mtspr SPRN_PMC5, r8
mtspr SPRN_PMC6, r9
ld r3, VCPU_MMCR(r4)
ld r5, VCPU_MMCR + 8(r4)
ld r6, VCPU_MMCR + 16(r4)
ld r7, VCPU_SIAR(r4)
ld r8, VCPU_SDAR(r4)
mtspr SPRN_MMCR1, r5
mtspr SPRN_MMCRA, r6
mtspr SPRN_SIAR, r7
mtspr SPRN_SDAR, r8
BEGIN_FTR_SECTION
ld r5, VCPU_MMCR + 24(r4)
ld r6, VCPU_SIER(r4)
mtspr SPRN_MMCR2, r5
mtspr SPRN_SIER, r6
BEGIN_FTR_SECTION_NESTED(96)
lwz r7, VCPU_PMC + 24(r4)
lwz r8, VCPU_PMC + 28(r4)
ld r9, VCPU_MMCR + 32(r4)
mtspr SPRN_SPMC1, r7
mtspr SPRN_SPMC2, r8
mtspr SPRN_MMCRS, r9
END_FTR_SECTION_NESTED(CPU_FTR_ARCH_300, 0, 96)
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
mtspr SPRN_MMCR0, r3
isync
/* Load up FP, VMX and VSX registers */
bl kvmppc_load_fp
ld r14, VCPU_GPR(R14)(r4)
ld r15, VCPU_GPR(R15)(r4)
ld r16, VCPU_GPR(R16)(r4)
ld r17, VCPU_GPR(R17)(r4)
ld r18, VCPU_GPR(R18)(r4)
ld r19, VCPU_GPR(R19)(r4)
ld r20, VCPU_GPR(R20)(r4)
ld r21, VCPU_GPR(R21)(r4)
ld r22, VCPU_GPR(R22)(r4)
ld r23, VCPU_GPR(R23)(r4)
ld r24, VCPU_GPR(R24)(r4)
ld r25, VCPU_GPR(R25)(r4)
ld r26, VCPU_GPR(R26)(r4)
ld r27, VCPU_GPR(R27)(r4)
ld r28, VCPU_GPR(R28)(r4)
ld r29, VCPU_GPR(R29)(r4)
ld r30, VCPU_GPR(R30)(r4)
ld r31, VCPU_GPR(R31)(r4)
/* Switch DSCR to guest value */
ld r5, VCPU_DSCR(r4)
mtspr SPRN_DSCR, r5
BEGIN_FTR_SECTION
/* Skip next section on POWER7 */
b 8f
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
/* Load up POWER8-specific registers */
ld r5, VCPU_IAMR(r4)
lwz r6, VCPU_PSPB(r4)
ld r7, VCPU_FSCR(r4)
mtspr SPRN_IAMR, r5
mtspr SPRN_PSPB, r6
mtspr SPRN_FSCR, r7
ld r5, VCPU_DAWR(r4)
ld r6, VCPU_DAWRX(r4)
ld r7, VCPU_CIABR(r4)
ld r8, VCPU_TAR(r4)
mtspr SPRN_DAWR, r5
mtspr SPRN_DAWRX, r6
mtspr SPRN_CIABR, r7
mtspr SPRN_TAR, r8
ld r5, VCPU_IC(r4)
ld r8, VCPU_EBBHR(r4)
mtspr SPRN_IC, r5
mtspr SPRN_EBBHR, r8
ld r5, VCPU_EBBRR(r4)
ld r6, VCPU_BESCR(r4)
lwz r7, VCPU_GUEST_PID(r4)
ld r8, VCPU_WORT(r4)
mtspr SPRN_EBBRR, r5
mtspr SPRN_BESCR, r6
mtspr SPRN_PID, r7
mtspr SPRN_WORT, r8
BEGIN_FTR_SECTION
/* POWER8-only registers */
ld r5, VCPU_TCSCR(r4)
ld r6, VCPU_ACOP(r4)
ld r7, VCPU_CSIGR(r4)
ld r8, VCPU_TACR(r4)
mtspr SPRN_TCSCR, r5
mtspr SPRN_ACOP, r6
mtspr SPRN_CSIGR, r7
mtspr SPRN_TACR, r8
FTR_SECTION_ELSE
/* POWER9-only registers */
ld r5, VCPU_TID(r4)
ld r6, VCPU_PSSCR(r4)
oris r6, r6, PSSCR_EC@h /* This makes stop trap to HV */
mtspr SPRN_TIDR, r5
mtspr SPRN_PSSCR, r6
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300)
8:
/*
* Set the decrementer to the guest decrementer.
*/
ld r8,VCPU_DEC_EXPIRES(r4)
/* r8 is a host timebase value here, convert to guest TB */
ld r5,HSTATE_KVM_VCORE(r13)
ld r6,VCORE_TB_OFFSET(r5)
add r8,r8,r6
mftb r7
subf r3,r7,r8
mtspr SPRN_DEC,r3
stw r3,VCPU_DEC(r4)
ld r5, VCPU_SPRG0(r4)
ld r6, VCPU_SPRG1(r4)
ld r7, VCPU_SPRG2(r4)
ld r8, VCPU_SPRG3(r4)
mtspr SPRN_SPRG0, r5
mtspr SPRN_SPRG1, r6
mtspr SPRN_SPRG2, r7
mtspr SPRN_SPRG3, r8
/* Load up DAR and DSISR */
ld r5, VCPU_DAR(r4)
lwz r6, VCPU_DSISR(r4)
mtspr SPRN_DAR, r5
mtspr SPRN_DSISR, r6
/* Restore AMR and UAMOR, set AMOR to all 1s */
ld r5,VCPU_AMR(r4)
ld r6,VCPU_UAMOR(r4)
li r7,-1
mtspr SPRN_AMR,r5
mtspr SPRN_UAMOR,r6
mtspr SPRN_AMOR,r7
/* Restore state of CTRL run bit; assume 1 on entry */
lwz r5,VCPU_CTRL(r4)
andi. r5,r5,1
bne 4f
mfspr r6,SPRN_CTRLF
clrrdi r6,r6,1
mtspr SPRN_CTRLT,r6
4:
/* Secondary threads wait for primary to have done partition switch */
ld r5, HSTATE_KVM_VCORE(r13)
lbz r6, HSTATE_PTID(r13)
cmpwi r6, 0
beq 21f
lbz r0, VCORE_IN_GUEST(r5)
cmpwi r0, 0
bne 21f
HMT_LOW
20: lwz r3, VCORE_ENTRY_EXIT(r5)
cmpwi r3, 0x100
bge no_switch_exit
lbz r0, VCORE_IN_GUEST(r5)
cmpwi r0, 0
beq 20b
HMT_MEDIUM
21:
/* Set LPCR. */
ld r8,VCORE_LPCR(r5)
mtspr SPRN_LPCR,r8
isync
/* Check if HDEC expires soon */
mfspr r3, SPRN_HDEC
cmpwi r3, 512 /* 1 microsecond */
blt hdec_soon
deliver_guest_interrupt:
ld r6, VCPU_CTR(r4)
ld r7, VCPU_XER(r4)
mtctr r6
mtxer r7
kvmppc_cede_reentry: /* r4 = vcpu, r13 = paca */
ld r10, VCPU_PC(r4)
ld r11, VCPU_MSR(r4)
ld r6, VCPU_SRR0(r4)
ld r7, VCPU_SRR1(r4)
mtspr SPRN_SRR0, r6
mtspr SPRN_SRR1, r7
/* r11 = vcpu->arch.msr & ~MSR_HV */
rldicl r11, r11, 63 - MSR_HV_LG, 1
rotldi r11, r11, 1 + MSR_HV_LG
ori r11, r11, MSR_ME
/* Check if we can deliver an external or decrementer interrupt now */
ld r0, VCPU_PENDING_EXC(r4)
rldicl r0, r0, 64 - BOOK3S_IRQPRIO_EXTERNAL_LEVEL, 63
cmpdi cr1, r0, 0
andi. r8, r11, MSR_EE
mfspr r8, SPRN_LPCR
/* Insert EXTERNAL_LEVEL bit into LPCR at the MER bit position */
rldimi r8, r0, LPCR_MER_SH, 63 - LPCR_MER_SH
mtspr SPRN_LPCR, r8
isync
beq 5f
li r0, BOOK3S_INTERRUPT_EXTERNAL
bne cr1, 12f
mfspr r0, SPRN_DEC
cmpwi r0, 0
li r0, BOOK3S_INTERRUPT_DECREMENTER
bge 5f
12: mtspr SPRN_SRR0, r10
mr r10,r0
mtspr SPRN_SRR1, r11
mr r9, r4
bl kvmppc_msr_interrupt
5:
/*
* Required state:
* R4 = vcpu
* R10: value for HSRR0
* R11: value for HSRR1
* R13 = PACA
*/
fast_guest_return:
li r0,0
stb r0,VCPU_CEDED(r4) /* cancel cede */
mtspr SPRN_HSRR0,r10
mtspr SPRN_HSRR1,r11
/* Activate guest mode, so faults get handled by KVM */
li r9, KVM_GUEST_MODE_GUEST_HV
stb r9, HSTATE_IN_GUEST(r13)
#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
/* Accumulate timing */
addi r3, r4, VCPU_TB_GUEST
bl kvmhv_accumulate_time
#endif
/* Enter guest */
BEGIN_FTR_SECTION
ld r5, VCPU_CFAR(r4)
mtspr SPRN_CFAR, r5
END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
BEGIN_FTR_SECTION
ld r0, VCPU_PPR(r4)
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
ld r5, VCPU_LR(r4)
lwz r6, VCPU_CR(r4)
mtlr r5
mtcr r6
ld r1, VCPU_GPR(R1)(r4)
ld r2, VCPU_GPR(R2)(r4)
ld r3, VCPU_GPR(R3)(r4)
ld r5, VCPU_GPR(R5)(r4)
ld r6, VCPU_GPR(R6)(r4)
ld r7, VCPU_GPR(R7)(r4)
ld r8, VCPU_GPR(R8)(r4)
ld r9, VCPU_GPR(R9)(r4)
ld r10, VCPU_GPR(R10)(r4)
ld r11, VCPU_GPR(R11)(r4)
ld r12, VCPU_GPR(R12)(r4)
ld r13, VCPU_GPR(R13)(r4)
BEGIN_FTR_SECTION
mtspr SPRN_PPR, r0
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
ld r0, VCPU_GPR(R0)(r4)
ld r4, VCPU_GPR(R4)(r4)
hrfid
b .
secondary_too_late:
li r12, 0
cmpdi r4, 0
beq 11f
stw r12, VCPU_TRAP(r4)
#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
addi r3, r4, VCPU_TB_RMEXIT
bl kvmhv_accumulate_time
#endif
11: b kvmhv_switch_to_host
no_switch_exit:
HMT_MEDIUM
li r12, 0
b 12f
hdec_soon:
li r12, BOOK3S_INTERRUPT_HV_DECREMENTER
12: stw r12, VCPU_TRAP(r4)
mr r9, r4
#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
addi r3, r4, VCPU_TB_RMEXIT
bl kvmhv_accumulate_time
#endif
b guest_exit_cont
/******************************************************************************
* *
* Exit code *
* *
*****************************************************************************/
/*
* We come here from the first-level interrupt handlers.
*/
.globl kvmppc_interrupt_hv
kvmppc_interrupt_hv:
/*
* Register contents:
* R12 = (guest CR << 32) | interrupt vector
* R13 = PACA
* guest R12 saved in shadow VCPU SCRATCH0
* guest CTR saved in shadow VCPU SCRATCH1 if RELOCATABLE
* guest R13 saved in SPRN_SCRATCH0
*/
std r9, HSTATE_SCRATCH2(r13)
lbz r9, HSTATE_IN_GUEST(r13)
cmpwi r9, KVM_GUEST_MODE_HOST_HV
beq kvmppc_bad_host_intr
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
cmpwi r9, KVM_GUEST_MODE_GUEST
ld r9, HSTATE_SCRATCH2(r13)
beq kvmppc_interrupt_pr
#endif
/* We're now back in the host but in guest MMU context */
li r9, KVM_GUEST_MODE_HOST_HV
stb r9, HSTATE_IN_GUEST(r13)
ld r9, HSTATE_KVM_VCPU(r13)
/* Save registers */
std r0, VCPU_GPR(R0)(r9)
std r1, VCPU_GPR(R1)(r9)
std r2, VCPU_GPR(R2)(r9)
std r3, VCPU_GPR(R3)(r9)
std r4, VCPU_GPR(R4)(r9)
std r5, VCPU_GPR(R5)(r9)
std r6, VCPU_GPR(R6)(r9)
std r7, VCPU_GPR(R7)(r9)
std r8, VCPU_GPR(R8)(r9)
ld r0, HSTATE_SCRATCH2(r13)
std r0, VCPU_GPR(R9)(r9)
std r10, VCPU_GPR(R10)(r9)
std r11, VCPU_GPR(R11)(r9)
ld r3, HSTATE_SCRATCH0(r13)
std r3, VCPU_GPR(R12)(r9)
/* CR is in the high half of r12 */
srdi r4, r12, 32
stw r4, VCPU_CR(r9)
BEGIN_FTR_SECTION
ld r3, HSTATE_CFAR(r13)
std r3, VCPU_CFAR(r9)
END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
BEGIN_FTR_SECTION
ld r4, HSTATE_PPR(r13)
std r4, VCPU_PPR(r9)
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
/* Restore R1/R2 so we can handle faults */
ld r1, HSTATE_HOST_R1(r13)
ld r2, PACATOC(r13)
mfspr r10, SPRN_SRR0
mfspr r11, SPRN_SRR1
std r10, VCPU_SRR0(r9)
std r11, VCPU_SRR1(r9)
/* trap is in the low half of r12, clear CR from the high half */
clrldi r12, r12, 32
andi. r0, r12, 2 /* need to read HSRR0/1? */
beq 1f
mfspr r10, SPRN_HSRR0
mfspr r11, SPRN_HSRR1
clrrdi r12, r12, 2
1: std r10, VCPU_PC(r9)
std r11, VCPU_MSR(r9)
GET_SCRATCH0(r3)
mflr r4
std r3, VCPU_GPR(R13)(r9)
std r4, VCPU_LR(r9)
stw r12,VCPU_TRAP(r9)
#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
addi r3, r9, VCPU_TB_RMINTR
mr r4, r9
bl kvmhv_accumulate_time
ld r5, VCPU_GPR(R5)(r9)
ld r6, VCPU_GPR(R6)(r9)
ld r7, VCPU_GPR(R7)(r9)
ld r8, VCPU_GPR(R8)(r9)
#endif
/* Save HEIR (HV emulation assist reg) in emul_inst
if this is an HEI (HV emulation interrupt, e40) */
li r3,KVM_INST_FETCH_FAILED
stw r3,VCPU_LAST_INST(r9)
cmpwi r12,BOOK3S_INTERRUPT_H_EMUL_ASSIST
bne 11f
mfspr r3,SPRN_HEIR
11: stw r3,VCPU_HEIR(r9)
/* these are volatile across C function calls */
#ifdef CONFIG_RELOCATABLE
ld r3, HSTATE_SCRATCH1(r13)
mtctr r3
#else
mfctr r3
#endif
mfxer r4
std r3, VCPU_CTR(r9)
std r4, VCPU_XER(r9)
/* If this is a page table miss then see if it's theirs or ours */
cmpwi r12, BOOK3S_INTERRUPT_H_DATA_STORAGE
beq kvmppc_hdsi
cmpwi r12, BOOK3S_INTERRUPT_H_INST_STORAGE
beq kvmppc_hisi
/* See if this is a leftover HDEC interrupt */
cmpwi r12,BOOK3S_INTERRUPT_HV_DECREMENTER
bne 2f
mfspr r3,SPRN_HDEC
cmpwi r3,0
mr r4,r9
bge fast_guest_return
2:
/* See if this is an hcall we can handle in real mode */
cmpwi r12,BOOK3S_INTERRUPT_SYSCALL
beq hcall_try_real_mode
/* Hypervisor doorbell - exit only if host IPI flag set */
cmpwi r12, BOOK3S_INTERRUPT_H_DOORBELL
bne 3f
lbz r0, HSTATE_HOST_IPI(r13)
cmpwi r0, 0
beq 4f
b guest_exit_cont
3:
/* External interrupt ? */
cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL
bne+ guest_exit_cont
/* External interrupt, first check for host_ipi. If this is
* set, we know the host wants us out so let's do it now
*/
bl kvmppc_read_intr
/*
* Restore the active volatile registers after returning from
* a C function.
*/
ld r9, HSTATE_KVM_VCPU(r13)
li r12, BOOK3S_INTERRUPT_EXTERNAL
/*
* kvmppc_read_intr return codes:
*
* Exit to host (r3 > 0)
* 1 An interrupt is pending that needs to be handled by the host
* Exit guest and return to host by branching to guest_exit_cont
*
* 2 Passthrough that needs completion in the host
* Exit guest and return to host by branching to guest_exit_cont
* However, we also set r12 to BOOK3S_INTERRUPT_HV_RM_HARD
* to indicate to the host to complete handling the interrupt
*
* Before returning to guest, we check if any CPU is heading out
* to the host and if so, we head out also. If no CPUs are heading
* check return values <= 0.
*
* Return to guest (r3 <= 0)
* 0 No external interrupt is pending
* -1 A guest wakeup IPI (which has now been cleared)
* In either case, we return to guest to deliver any pending
* guest interrupts.
*
* -2 A PCI passthrough external interrupt was handled
* (interrupt was delivered directly to guest)
* Return to guest to deliver any pending guest interrupts.
*/
cmpdi r3, 1
ble 1f
/* Return code = 2 */
li r12, BOOK3S_INTERRUPT_HV_RM_HARD
stw r12, VCPU_TRAP(r9)
b guest_exit_cont
1: /* Return code <= 1 */
cmpdi r3, 0
bgt guest_exit_cont
/* Return code <= 0 */
4: ld r5, HSTATE_KVM_VCORE(r13)
lwz r0, VCORE_ENTRY_EXIT(r5)
cmpwi r0, 0x100
mr r4, r9
blt deliver_guest_interrupt
guest_exit_cont: /* r9 = vcpu, r12 = trap, r13 = paca */
/* Save more register state */
mfdar r6
mfdsisr r7
std r6, VCPU_DAR(r9)
stw r7, VCPU_DSISR(r9)
/* don't overwrite fault_dar/fault_dsisr if HDSI */
cmpwi r12,BOOK3S_INTERRUPT_H_DATA_STORAGE
beq mc_cont
std r6, VCPU_FAULT_DAR(r9)
stw r7, VCPU_FAULT_DSISR(r9)
/* See if it is a machine check */
cmpwi r12, BOOK3S_INTERRUPT_MACHINE_CHECK
beq machine_check_realmode
mc_cont:
#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
addi r3, r9, VCPU_TB_RMEXIT
mr r4, r9
bl kvmhv_accumulate_time
#endif
mr r3, r12
/* Increment exit count, poke other threads to exit */
bl kvmhv_commence_exit
nop
ld r9, HSTATE_KVM_VCPU(r13)
lwz r12, VCPU_TRAP(r9)
/* Stop others sending VCPU interrupts to this physical CPU */
li r0, -1
stw r0, VCPU_CPU(r9)
stw r0, VCPU_THREAD_CPU(r9)
/* Save guest CTRL register, set runlatch to 1 */
mfspr r6,SPRN_CTRLF
stw r6,VCPU_CTRL(r9)
andi. r0,r6,1
bne 4f
ori r6,r6,1
mtspr SPRN_CTRLT,r6
4:
/* Read the guest SLB and save it away */
ld r5, VCPU_KVM(r9)
lbz r0, KVM_RADIX(r5)
cmpwi r0, 0
li r5, 0
bne 3f /* for radix, save 0 entries */
lwz r0,VCPU_SLB_NR(r9) /* number of entries in SLB */
mtctr r0
li r6,0
addi r7,r9,VCPU_SLB
1: slbmfee r8,r6
andis. r0,r8,SLB_ESID_V@h
beq 2f
add r8,r8,r6 /* put index in */
slbmfev r3,r6
std r8,VCPU_SLB_E(r7)
std r3,VCPU_SLB_V(r7)
addi r7,r7,VCPU_SLB_SIZE
addi r5,r5,1
2: addi r6,r6,1
bdnz 1b
3: stw r5,VCPU_SLB_MAX(r9)
/*
* Save the guest PURR/SPURR
*/
mfspr r5,SPRN_PURR
mfspr r6,SPRN_SPURR
ld r7,VCPU_PURR(r9)
ld r8,VCPU_SPURR(r9)
std r5,VCPU_PURR(r9)
std r6,VCPU_SPURR(r9)
subf r5,r7,r5
subf r6,r8,r6
/*
* Restore host PURR/SPURR and add guest times
* so that the time in the guest gets accounted.
*/
ld r3,HSTATE_PURR(r13)
ld r4,HSTATE_SPURR(r13)
add r3,r3,r5
add r4,r4,r6
mtspr SPRN_PURR,r3
mtspr SPRN_SPURR,r4
/* Save DEC */
mfspr r5,SPRN_DEC
mftb r6
extsw r5,r5
add r5,r5,r6
/* r5 is a guest timebase value here, convert to host TB */
ld r3,HSTATE_KVM_VCORE(r13)
ld r4,VCORE_TB_OFFSET(r3)
subf r5,r4,r5
std r5,VCPU_DEC_EXPIRES(r9)
BEGIN_FTR_SECTION
b 8f
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
/* Save POWER8-specific registers */
mfspr r5, SPRN_IAMR
mfspr r6, SPRN_PSPB
mfspr r7, SPRN_FSCR
std r5, VCPU_IAMR(r9)
stw r6, VCPU_PSPB(r9)
std r7, VCPU_FSCR(r9)
mfspr r5, SPRN_IC
mfspr r7, SPRN_TAR
std r5, VCPU_IC(r9)
std r7, VCPU_TAR(r9)
mfspr r8, SPRN_EBBHR
std r8, VCPU_EBBHR(r9)
mfspr r5, SPRN_EBBRR
mfspr r6, SPRN_BESCR
mfspr r7, SPRN_PID
mfspr r8, SPRN_WORT
std r5, VCPU_EBBRR(r9)
std r6, VCPU_BESCR(r9)
stw r7, VCPU_GUEST_PID(r9)
std r8, VCPU_WORT(r9)
BEGIN_FTR_SECTION
mfspr r5, SPRN_TCSCR
mfspr r6, SPRN_ACOP
mfspr r7, SPRN_CSIGR
mfspr r8, SPRN_TACR
std r5, VCPU_TCSCR(r9)
std r6, VCPU_ACOP(r9)
std r7, VCPU_CSIGR(r9)
std r8, VCPU_TACR(r9)
FTR_SECTION_ELSE
mfspr r5, SPRN_TIDR
mfspr r6, SPRN_PSSCR
std r5, VCPU_TID(r9)
rldicl r6, r6, 4, 50 /* r6 &= PSSCR_GUEST_VIS */
rotldi r6, r6, 60
std r6, VCPU_PSSCR(r9)
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300)
/*
* Restore various registers to 0, where non-zero values
* set by the guest could disrupt the host.
*/
li r0, 0
mtspr SPRN_IAMR, r0
mtspr SPRN_CIABR, r0
mtspr SPRN_DAWRX, r0
mtspr SPRN_WORT, r0
BEGIN_FTR_SECTION
mtspr SPRN_TCSCR, r0
/* Set MMCRS to 1<<31 to freeze and disable the SPMC counters */
li r0, 1
sldi r0, r0, 31
mtspr SPRN_MMCRS, r0
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
8:
/* Save and reset AMR and UAMOR before turning on the MMU */
mfspr r5,SPRN_AMR
mfspr r6,SPRN_UAMOR
std r5,VCPU_AMR(r9)
std r6,VCPU_UAMOR(r9)
li r6,0
mtspr SPRN_AMR,r6
/* Switch DSCR back to host value */
mfspr r8, SPRN_DSCR
ld r7, HSTATE_DSCR(r13)
std r8, VCPU_DSCR(r9)
mtspr SPRN_DSCR, r7
/* Save non-volatile GPRs */
std r14, VCPU_GPR(R14)(r9)
std r15, VCPU_GPR(R15)(r9)
std r16, VCPU_GPR(R16)(r9)
std r17, VCPU_GPR(R17)(r9)
std r18, VCPU_GPR(R18)(r9)
std r19, VCPU_GPR(R19)(r9)
std r20, VCPU_GPR(R20)(r9)
std r21, VCPU_GPR(R21)(r9)
std r22, VCPU_GPR(R22)(r9)
std r23, VCPU_GPR(R23)(r9)
std r24, VCPU_GPR(R24)(r9)
std r25, VCPU_GPR(R25)(r9)
std r26, VCPU_GPR(R26)(r9)
std r27, VCPU_GPR(R27)(r9)
std r28, VCPU_GPR(R28)(r9)
std r29, VCPU_GPR(R29)(r9)
std r30, VCPU_GPR(R30)(r9)
std r31, VCPU_GPR(R31)(r9)
/* Save SPRGs */
mfspr r3, SPRN_SPRG0
mfspr r4, SPRN_SPRG1
mfspr r5, SPRN_SPRG2
mfspr r6, SPRN_SPRG3
std r3, VCPU_SPRG0(r9)
std r4, VCPU_SPRG1(r9)
std r5, VCPU_SPRG2(r9)
std r6, VCPU_SPRG3(r9)
/* save FP state */
mr r3, r9
bl kvmppc_save_fp
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
BEGIN_FTR_SECTION
bl kvmppc_save_tm
END_FTR_SECTION_IFSET(CPU_FTR_TM)
#endif
/* Increment yield count if they have a VPA */
ld r8, VCPU_VPA(r9) /* do they have a VPA? */
cmpdi r8, 0
beq 25f
li r4, LPPACA_YIELDCOUNT
LWZX_BE r3, r8, r4
addi r3, r3, 1
STWX_BE r3, r8, r4
li r3, 1
stb r3, VCPU_VPA_DIRTY(r9)
25:
/* Save PMU registers if requested */
/* r8 and cr0.eq are live here */
BEGIN_FTR_SECTION
/*
* POWER8 seems to have a hardware bug where setting
* MMCR0[PMAE] along with MMCR0[PMC1CE] and/or MMCR0[PMCjCE]
* when some counters are already negative doesn't seem
* to cause a performance monitor alert (and hence interrupt).
* The effect of this is that when saving the PMU state,
* if there is no PMU alert pending when we read MMCR0
* before freezing the counters, but one becomes pending
* before we read the counters, we lose it.
* To work around this, we need a way to freeze the counters
* before reading MMCR0. Normally, freezing the counters
* is done by writing MMCR0 (to set MMCR0[FC]) which
* unavoidably writes MMCR0[PMA0] as well. On POWER8,
* we can also freeze the counters using MMCR2, by writing
* 1s to all the counter freeze condition bits (there are
* 9 bits each for 6 counters).
*/
li r3, -1 /* set all freeze bits */
clrrdi r3, r3, 10
mfspr r10, SPRN_MMCR2
mtspr SPRN_MMCR2, r3
isync
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
li r3, 1
sldi r3, r3, 31 /* MMCR0_FC (freeze counters) bit */
mfspr r4, SPRN_MMCR0 /* save MMCR0 */
mtspr SPRN_MMCR0, r3 /* freeze all counters, disable ints */
mfspr r6, SPRN_MMCRA
/* Clear MMCRA in order to disable SDAR updates */
li r7, 0
mtspr SPRN_MMCRA, r7
isync
beq 21f /* if no VPA, save PMU stuff anyway */
lbz r7, LPPACA_PMCINUSE(r8)
cmpwi r7, 0 /* did they ask for PMU stuff to be saved? */
bne 21f
std r3, VCPU_MMCR(r9) /* if not, set saved MMCR0 to FC */
b 22f
21: mfspr r5, SPRN_MMCR1
mfspr r7, SPRN_SIAR
mfspr r8, SPRN_SDAR
std r4, VCPU_MMCR(r9)
std r5, VCPU_MMCR + 8(r9)
std r6, VCPU_MMCR + 16(r9)
BEGIN_FTR_SECTION
std r10, VCPU_MMCR + 24(r9)
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
std r7, VCPU_SIAR(r9)
std r8, VCPU_SDAR(r9)
mfspr r3, SPRN_PMC1
mfspr r4, SPRN_PMC2
mfspr r5, SPRN_PMC3
mfspr r6, SPRN_PMC4
mfspr r7, SPRN_PMC5
mfspr r8, SPRN_PMC6
stw r3, VCPU_PMC(r9)
stw r4, VCPU_PMC + 4(r9)
stw r5, VCPU_PMC + 8(r9)
stw r6, VCPU_PMC + 12(r9)
stw r7, VCPU_PMC + 16(r9)
stw r8, VCPU_PMC + 20(r9)
BEGIN_FTR_SECTION
mfspr r5, SPRN_SIER
std r5, VCPU_SIER(r9)
BEGIN_FTR_SECTION_NESTED(96)
mfspr r6, SPRN_SPMC1
mfspr r7, SPRN_SPMC2
mfspr r8, SPRN_MMCRS
stw r6, VCPU_PMC + 24(r9)
stw r7, VCPU_PMC + 28(r9)
std r8, VCPU_MMCR + 32(r9)
lis r4, 0x8000
mtspr SPRN_MMCRS, r4
END_FTR_SECTION_NESTED(CPU_FTR_ARCH_300, 0, 96)
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
22:
/* Clear out SLB */
li r5,0
slbmte r5,r5
slbia
ptesync
/* Restore host values of some registers */
BEGIN_FTR_SECTION
ld r5, STACK_SLOT_TID(r1)
ld r6, STACK_SLOT_PSSCR(r1)
ld r7, STACK_SLOT_PID(r1)
mtspr SPRN_TIDR, r5
mtspr SPRN_PSSCR, r6
mtspr SPRN_PID, r7
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
/*
* POWER7/POWER8 guest -> host partition switch code.
* We don't have to lock against tlbies but we do
* have to coordinate the hardware threads.
*/
kvmhv_switch_to_host:
/* Secondary threads wait for primary to do partition switch */
ld r5,HSTATE_KVM_VCORE(r13)
ld r4,VCORE_KVM(r5) /* pointer to struct kvm */
lbz r3,HSTATE_PTID(r13)
cmpwi r3,0
beq 15f
HMT_LOW
13: lbz r3,VCORE_IN_GUEST(r5)
cmpwi r3,0
bne 13b
HMT_MEDIUM
b 16f
/* Primary thread waits for all the secondaries to exit guest */
15: lwz r3,VCORE_ENTRY_EXIT(r5)
rlwinm r0,r3,32-8,0xff
clrldi r3,r3,56
cmpw r3,r0
bne 15b
isync
/* Did we actually switch to the guest at all? */
lbz r6, VCORE_IN_GUEST(r5)
cmpwi r6, 0
beq 19f
/* Primary thread switches back to host partition */
lwz r7,KVM_HOST_LPID(r4)
BEGIN_FTR_SECTION
ld r6,KVM_HOST_SDR1(r4)
li r8,LPID_RSVD /* switch to reserved LPID */
mtspr SPRN_LPID,r8
ptesync
mtspr SPRN_SDR1,r6 /* switch to host page table */
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
mtspr SPRN_LPID,r7
isync
BEGIN_FTR_SECTION
/* DPDES and VTB are shared between threads */
mfspr r7, SPRN_DPDES
mfspr r8, SPRN_VTB
std r7, VCORE_DPDES(r5)
std r8, VCORE_VTB(r5)
/* clear DPDES so we don't get guest doorbells in the host */
li r8, 0
mtspr SPRN_DPDES, r8
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
/* If HMI, call kvmppc_realmode_hmi_handler() */
cmpwi r12, BOOK3S_INTERRUPT_HMI
bne 27f
bl kvmppc_realmode_hmi_handler
nop
li r12, BOOK3S_INTERRUPT_HMI
/*
* At this point kvmppc_realmode_hmi_handler would have resync-ed
* the TB. Hence it is not required to subtract guest timebase
* offset from timebase. So, skip it.
*
* Also, do not call kvmppc_subcore_exit_guest() because it has
* been invoked as part of kvmppc_realmode_hmi_handler().
*/
b 30f
27:
/* Subtract timebase offset from timebase */
ld r8,VCORE_TB_OFFSET(r5)
cmpdi r8,0
beq 17f
mftb r6 /* current guest timebase */
subf r8,r8,r6
mtspr SPRN_TBU40,r8 /* update upper 40 bits */
mftb r7 /* check if lower 24 bits overflowed */
clrldi r6,r6,40
clrldi r7,r7,40
cmpld r7,r6
bge 17f
addis r8,r8,0x100 /* if so, increment upper 40 bits */
mtspr SPRN_TBU40,r8
17: bl kvmppc_subcore_exit_guest
nop
30: ld r5,HSTATE_KVM_VCORE(r13)
ld r4,VCORE_KVM(r5) /* pointer to struct kvm */
/* Reset PCR */
ld r0, VCORE_PCR(r5)
cmpdi r0, 0
beq 18f
li r0, 0
mtspr SPRN_PCR, r0
18:
/* Signal secondary CPUs to continue */
stb r0,VCORE_IN_GUEST(r5)
19: lis r8,0x7fff /* MAX_INT@h */
mtspr SPRN_HDEC,r8
16: ld r8,KVM_HOST_LPCR(r4)
mtspr SPRN_LPCR,r8
isync
/* load host SLB entries */
BEGIN_MMU_FTR_SECTION
b 0f
END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
ld r8,PACA_SLBSHADOWPTR(r13)
.rept SLB_NUM_BOLTED
li r3, SLBSHADOW_SAVEAREA
LDX_BE r5, r8, r3
addi r3, r3, 8
LDX_BE r6, r8, r3
andis. r7,r5,SLB_ESID_V@h
beq 1f
slbmte r6,r5
1: addi r8,r8,16
.endr
0:
#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
/* Finish timing, if we have a vcpu */
ld r4, HSTATE_KVM_VCPU(r13)
cmpdi r4, 0
li r3, 0
beq 2f
bl kvmhv_accumulate_time
2:
#endif
/* Unset guest mode */
li r0, KVM_GUEST_MODE_NONE
stb r0, HSTATE_IN_GUEST(r13)
ld r0, 112+PPC_LR_STKOFF(r1)
addi r1, r1, 112
mtlr r0
blr
/*
* Check whether an HDSI is an HPTE not found fault or something else.
* If it is an HPTE not found fault that is due to the guest accessing
* a page that they have mapped but which we have paged out, then
* we continue on with the guest exit path. In all other cases,
* reflect the HDSI to the guest as a DSI.
*/
kvmppc_hdsi:
ld r3, VCPU_KVM(r9)
lbz r0, KVM_RADIX(r3)
cmpwi r0, 0
mfspr r4, SPRN_HDAR
mfspr r6, SPRN_HDSISR
bne .Lradix_hdsi /* on radix, just save DAR/DSISR/ASDR */
/* HPTE not found fault or protection fault? */
andis. r0, r6, (DSISR_NOHPTE | DSISR_PROTFAULT)@h
beq 1f /* if not, send it to the guest */
BEGIN_FTR_SECTION
mfspr r5, SPRN_ASDR /* on POWER9, use ASDR to get VSID */
b 4f
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
andi. r0, r11, MSR_DR /* data relocation enabled? */
beq 3f
clrrdi r0, r4, 28
PPC_SLBFEE_DOT(R5, R0) /* if so, look up SLB */
li r0, BOOK3S_INTERRUPT_DATA_SEGMENT
bne 7f /* if no SLB entry found */
4: std r4, VCPU_FAULT_DAR(r9)
stw r6, VCPU_FAULT_DSISR(r9)
/* Search the hash table. */
mr r3, r9 /* vcpu pointer */
li r7, 1 /* data fault */
bl kvmppc_hpte_hv_fault
ld r9, HSTATE_KVM_VCPU(r13)
ld r10, VCPU_PC(r9)
ld r11, VCPU_MSR(r9)
li r12, BOOK3S_INTERRUPT_H_DATA_STORAGE
cmpdi r3, 0 /* retry the instruction */
beq 6f
cmpdi r3, -1 /* handle in kernel mode */
beq guest_exit_cont
cmpdi r3, -2 /* MMIO emulation; need instr word */
beq 2f
/* Synthesize a DSI (or DSegI) for the guest */
ld r4, VCPU_FAULT_DAR(r9)
mr r6, r3
1: li r0, BOOK3S_INTERRUPT_DATA_STORAGE
mtspr SPRN_DSISR, r6
7: mtspr SPRN_DAR, r4
mtspr SPRN_SRR0, r10
mtspr SPRN_SRR1, r11
mr r10, r0
bl kvmppc_msr_interrupt
fast_interrupt_c_return:
6: ld r7, VCPU_CTR(r9)
ld r8, VCPU_XER(r9)
mtctr r7
mtxer r8
mr r4, r9
b fast_guest_return
3: ld r5, VCPU_KVM(r9) /* not relocated, use VRMA */
ld r5, KVM_VRMA_SLB_V(r5)
b 4b
/* If this is for emulated MMIO, load the instruction word */
2: li r8, KVM_INST_FETCH_FAILED /* In case lwz faults */
/* Set guest mode to 'jump over instruction' so if lwz faults
* we'll just continue at the next IP. */
li r0, KVM_GUEST_MODE_SKIP
stb r0, HSTATE_IN_GUEST(r13)
/* Do the access with MSR:DR enabled */
mfmsr r3
ori r4, r3, MSR_DR /* Enable paging for data */
mtmsrd r4
lwz r8, 0(r10)
mtmsrd r3
/* Store the result */
stw r8, VCPU_LAST_INST(r9)
/* Unset guest mode. */
li r0, KVM_GUEST_MODE_HOST_HV
stb r0, HSTATE_IN_GUEST(r13)
b guest_exit_cont
.Lradix_hdsi:
std r4, VCPU_FAULT_DAR(r9)
stw r6, VCPU_FAULT_DSISR(r9)
.Lradix_hisi:
mfspr r5, SPRN_ASDR
std r5, VCPU_FAULT_GPA(r9)
b guest_exit_cont
/*
* Similarly for an HISI, reflect it to the guest as an ISI unless
* it is an HPTE not found fault for a page that we have paged out.
*/
kvmppc_hisi:
ld r3, VCPU_KVM(r9)
lbz r0, KVM_RADIX(r3)
cmpwi r0, 0
bne .Lradix_hisi /* for radix, just save ASDR */
andis. r0, r11, SRR1_ISI_NOPT@h
beq 1f
BEGIN_FTR_SECTION
mfspr r5, SPRN_ASDR /* on POWER9, use ASDR to get VSID */
b 4f
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
andi. r0, r11, MSR_IR /* instruction relocation enabled? */
beq 3f
clrrdi r0, r10, 28
PPC_SLBFEE_DOT(R5, R0) /* if so, look up SLB */
li r0, BOOK3S_INTERRUPT_INST_SEGMENT
bne 7f /* if no SLB entry found */
4:
/* Search the hash table. */
mr r3, r9 /* vcpu pointer */
mr r4, r10
mr r6, r11
li r7, 0 /* instruction fault */
bl kvmppc_hpte_hv_fault
ld r9, HSTATE_KVM_VCPU(r13)
ld r10, VCPU_PC(r9)
ld r11, VCPU_MSR(r9)
li r12, BOOK3S_INTERRUPT_H_INST_STORAGE
cmpdi r3, 0 /* retry the instruction */
beq fast_interrupt_c_return
cmpdi r3, -1 /* handle in kernel mode */
beq guest_exit_cont
/* Synthesize an ISI (or ISegI) for the guest */
mr r11, r3
1: li r0, BOOK3S_INTERRUPT_INST_STORAGE
7: mtspr SPRN_SRR0, r10
mtspr SPRN_SRR1, r11
mr r10, r0
bl kvmppc_msr_interrupt
b fast_interrupt_c_return
3: ld r6, VCPU_KVM(r9) /* not relocated, use VRMA */
ld r5, KVM_VRMA_SLB_V(r6)
b 4b
/*
* Try to handle an hcall in real mode.
* Returns to the guest if we handle it, or continues on up to
* the kernel if we can't (i.e. if we don't have a handler for
* it, or if the handler returns H_TOO_HARD).
*
* r5 - r8 contain hcall args,
* r9 = vcpu, r10 = pc, r11 = msr, r12 = trap, r13 = paca
*/
hcall_try_real_mode:
ld r3,VCPU_GPR(R3)(r9)
andi. r0,r11,MSR_PR
/* sc 1 from userspace - reflect to guest syscall */
bne sc_1_fast_return
clrrdi r3,r3,2
cmpldi r3,hcall_real_table_end - hcall_real_table
bge guest_exit_cont
/* See if this hcall is enabled for in-kernel handling */
ld r4, VCPU_KVM(r9)
srdi r0, r3, 8 /* r0 = (r3 / 4) >> 6 */
sldi r0, r0, 3 /* index into kvm->arch.enabled_hcalls[] */
add r4, r4, r0
ld r0, KVM_ENABLED_HCALLS(r4)
rlwinm r4, r3, 32-2, 0x3f /* r4 = (r3 / 4) & 0x3f */
srd r0, r0, r4
andi. r0, r0, 1
beq guest_exit_cont
/* Get pointer to handler, if any, and call it */
LOAD_REG_ADDR(r4, hcall_real_table)
lwax r3,r3,r4
cmpwi r3,0
beq guest_exit_cont
add r12,r3,r4
mtctr r12
mr r3,r9 /* get vcpu pointer */
ld r4,VCPU_GPR(R4)(r9)
bctrl
cmpdi r3,H_TOO_HARD
beq hcall_real_fallback
ld r4,HSTATE_KVM_VCPU(r13)
std r3,VCPU_GPR(R3)(r4)
ld r10,VCPU_PC(r4)
ld r11,VCPU_MSR(r4)
b fast_guest_return
sc_1_fast_return:
mtspr SPRN_SRR0,r10
mtspr SPRN_SRR1,r11
li r10, BOOK3S_INTERRUPT_SYSCALL
bl kvmppc_msr_interrupt
mr r4,r9
b fast_guest_return
/* We've attempted a real mode hcall, but it's punted it back
* to userspace. We need to restore some clobbered volatiles
* before resuming the pass-it-to-qemu path */
hcall_real_fallback:
li r12,BOOK3S_INTERRUPT_SYSCALL
ld r9, HSTATE_KVM_VCPU(r13)
b guest_exit_cont
.globl hcall_real_table
hcall_real_table:
.long 0 /* 0 - unused */
.long DOTSYM(kvmppc_h_remove) - hcall_real_table
.long DOTSYM(kvmppc_h_enter) - hcall_real_table
.long DOTSYM(kvmppc_h_read) - hcall_real_table
.long DOTSYM(kvmppc_h_clear_mod) - hcall_real_table
.long DOTSYM(kvmppc_h_clear_ref) - hcall_real_table
.long DOTSYM(kvmppc_h_protect) - hcall_real_table
.long DOTSYM(kvmppc_h_get_tce) - hcall_real_table
.long DOTSYM(kvmppc_rm_h_put_tce) - hcall_real_table
.long 0 /* 0x24 - H_SET_SPRG0 */
.long DOTSYM(kvmppc_h_set_dabr) - hcall_real_table
.long 0 /* 0x2c */
.long 0 /* 0x30 */
.long 0 /* 0x34 */
.long 0 /* 0x38 */
.long 0 /* 0x3c */
.long 0 /* 0x40 */
.long 0 /* 0x44 */
.long 0 /* 0x48 */
.long 0 /* 0x4c */
.long 0 /* 0x50 */
.long 0 /* 0x54 */
.long 0 /* 0x58 */
.long 0 /* 0x5c */
.long 0 /* 0x60 */
#ifdef CONFIG_KVM_XICS
.long DOTSYM(kvmppc_rm_h_eoi) - hcall_real_table
.long DOTSYM(kvmppc_rm_h_cppr) - hcall_real_table
.long DOTSYM(kvmppc_rm_h_ipi) - hcall_real_table
.long 0 /* 0x70 - H_IPOLL */
.long DOTSYM(kvmppc_rm_h_xirr) - hcall_real_table
#else
.long 0 /* 0x64 - H_EOI */
.long 0 /* 0x68 - H_CPPR */
.long 0 /* 0x6c - H_IPI */
.long 0 /* 0x70 - H_IPOLL */
.long 0 /* 0x74 - H_XIRR */
#endif
.long 0 /* 0x78 */
.long 0 /* 0x7c */
.long 0 /* 0x80 */
.long 0 /* 0x84 */
.long 0 /* 0x88 */
.long 0 /* 0x8c */
.long 0 /* 0x90 */
.long 0 /* 0x94 */
.long 0 /* 0x98 */
.long 0 /* 0x9c */
.long 0 /* 0xa0 */
.long 0 /* 0xa4 */
.long 0 /* 0xa8 */
.long 0 /* 0xac */
.long 0 /* 0xb0 */
.long 0 /* 0xb4 */
.long 0 /* 0xb8 */
.long 0 /* 0xbc */
.long 0 /* 0xc0 */
.long 0 /* 0xc4 */
.long 0 /* 0xc8 */
.long 0 /* 0xcc */
.long 0 /* 0xd0 */
.long 0 /* 0xd4 */
.long 0 /* 0xd8 */
.long 0 /* 0xdc */
.long DOTSYM(kvmppc_h_cede) - hcall_real_table
.long DOTSYM(kvmppc_rm_h_confer) - hcall_real_table
.long 0 /* 0xe8 */
.long 0 /* 0xec */
.long 0 /* 0xf0 */
.long 0 /* 0xf4 */
.long 0 /* 0xf8 */
.long 0 /* 0xfc */
.long 0 /* 0x100 */
.long 0 /* 0x104 */
.long 0 /* 0x108 */
.long 0 /* 0x10c */
.long 0 /* 0x110 */
.long 0 /* 0x114 */
.long 0 /* 0x118 */
.long 0 /* 0x11c */
.long 0 /* 0x120 */
.long DOTSYM(kvmppc_h_bulk_remove) - hcall_real_table
.long 0 /* 0x128 */
.long 0 /* 0x12c */
.long 0 /* 0x130 */
.long DOTSYM(kvmppc_h_set_xdabr) - hcall_real_table
.long DOTSYM(kvmppc_rm_h_stuff_tce) - hcall_real_table
.long DOTSYM(kvmppc_rm_h_put_tce_indirect) - hcall_real_table
.long 0 /* 0x140 */
.long 0 /* 0x144 */
.long 0 /* 0x148 */
.long 0 /* 0x14c */
.long 0 /* 0x150 */
.long 0 /* 0x154 */
.long 0 /* 0x158 */
.long 0 /* 0x15c */
.long 0 /* 0x160 */
.long 0 /* 0x164 */
.long 0 /* 0x168 */
.long 0 /* 0x16c */
.long 0 /* 0x170 */
.long 0 /* 0x174 */
.long 0 /* 0x178 */
.long 0 /* 0x17c */
.long 0 /* 0x180 */
.long 0 /* 0x184 */
.long 0 /* 0x188 */
.long 0 /* 0x18c */
.long 0 /* 0x190 */
.long 0 /* 0x194 */
.long 0 /* 0x198 */
.long 0 /* 0x19c */
.long 0 /* 0x1a0 */
.long 0 /* 0x1a4 */
.long 0 /* 0x1a8 */
.long 0 /* 0x1ac */
.long 0 /* 0x1b0 */
.long 0 /* 0x1b4 */
.long 0 /* 0x1b8 */
.long 0 /* 0x1bc */
.long 0 /* 0x1c0 */
.long 0 /* 0x1c4 */
.long 0 /* 0x1c8 */
.long 0 /* 0x1cc */
.long 0 /* 0x1d0 */
.long 0 /* 0x1d4 */
.long 0 /* 0x1d8 */
.long 0 /* 0x1dc */
.long 0 /* 0x1e0 */
.long 0 /* 0x1e4 */
.long 0 /* 0x1e8 */
.long 0 /* 0x1ec */
.long 0 /* 0x1f0 */
.long 0 /* 0x1f4 */
.long 0 /* 0x1f8 */
.long 0 /* 0x1fc */
.long 0 /* 0x200 */
.long 0 /* 0x204 */
.long 0 /* 0x208 */
.long 0 /* 0x20c */
.long 0 /* 0x210 */
.long 0 /* 0x214 */
.long 0 /* 0x218 */
.long 0 /* 0x21c */
.long 0 /* 0x220 */
.long 0 /* 0x224 */
.long 0 /* 0x228 */
.long 0 /* 0x22c */
.long 0 /* 0x230 */
.long 0 /* 0x234 */
.long 0 /* 0x238 */
.long 0 /* 0x23c */
.long 0 /* 0x240 */
.long 0 /* 0x244 */
.long 0 /* 0x248 */
.long 0 /* 0x24c */
.long 0 /* 0x250 */
.long 0 /* 0x254 */
.long 0 /* 0x258 */
.long 0 /* 0x25c */
.long 0 /* 0x260 */
.long 0 /* 0x264 */
.long 0 /* 0x268 */
.long 0 /* 0x26c */
.long 0 /* 0x270 */
.long 0 /* 0x274 */
.long 0 /* 0x278 */
.long 0 /* 0x27c */
.long 0 /* 0x280 */
.long 0 /* 0x284 */
.long 0 /* 0x288 */
.long 0 /* 0x28c */
.long 0 /* 0x290 */
.long 0 /* 0x294 */
.long 0 /* 0x298 */
.long 0 /* 0x29c */
.long 0 /* 0x2a0 */
.long 0 /* 0x2a4 */
.long 0 /* 0x2a8 */
.long 0 /* 0x2ac */
.long 0 /* 0x2b0 */
.long 0 /* 0x2b4 */
.long 0 /* 0x2b8 */
.long 0 /* 0x2bc */
.long 0 /* 0x2c0 */
.long 0 /* 0x2c4 */
.long 0 /* 0x2c8 */
.long 0 /* 0x2cc */
.long 0 /* 0x2d0 */
.long 0 /* 0x2d4 */
.long 0 /* 0x2d8 */
.long 0 /* 0x2dc */
.long 0 /* 0x2e0 */
.long 0 /* 0x2e4 */
.long 0 /* 0x2e8 */
.long 0 /* 0x2ec */
.long 0 /* 0x2f0 */
.long 0 /* 0x2f4 */
.long 0 /* 0x2f8 */
.long 0 /* 0x2fc */
.long DOTSYM(kvmppc_h_random) - hcall_real_table
.globl hcall_real_table_end
hcall_real_table_end:
_GLOBAL(kvmppc_h_set_xdabr)
andi. r0, r5, DABRX_USER | DABRX_KERNEL
beq 6f
li r0, DABRX_USER | DABRX_KERNEL | DABRX_BTI
andc. r0, r5, r0
beq 3f
6: li r3, H_PARAMETER
blr
_GLOBAL(kvmppc_h_set_dabr)
li r5, DABRX_USER | DABRX_KERNEL
3:
BEGIN_FTR_SECTION
b 2f
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
std r4,VCPU_DABR(r3)
stw r5, VCPU_DABRX(r3)
mtspr SPRN_DABRX, r5
/* Work around P7 bug where DABR can get corrupted on mtspr */
1: mtspr SPRN_DABR,r4
mfspr r5, SPRN_DABR
cmpd r4, r5
bne 1b
isync
li r3,0
blr
/* Emulate H_SET_DABR/X on P8 for the sake of compat mode guests */
2: rlwimi r5, r4, 5, DAWRX_DR | DAWRX_DW
rlwimi r5, r4, 2, DAWRX_WT
clrrdi r4, r4, 3
std r4, VCPU_DAWR(r3)
std r5, VCPU_DAWRX(r3)
mtspr SPRN_DAWR, r4
mtspr SPRN_DAWRX, r5
li r3, 0
blr
_GLOBAL(kvmppc_h_cede) /* r3 = vcpu pointer, r11 = msr, r13 = paca */
ori r11,r11,MSR_EE
std r11,VCPU_MSR(r3)
li r0,1
stb r0,VCPU_CEDED(r3)
sync /* order setting ceded vs. testing prodded */
lbz r5,VCPU_PRODDED(r3)
cmpwi r5,0
bne kvm_cede_prodded
li r12,0 /* set trap to 0 to say hcall is handled */
stw r12,VCPU_TRAP(r3)
li r0,H_SUCCESS
std r0,VCPU_GPR(R3)(r3)
/*
* Set our bit in the bitmask of napping threads unless all the
* other threads are already napping, in which case we send this
* up to the host.
*/
ld r5,HSTATE_KVM_VCORE(r13)
lbz r6,HSTATE_PTID(r13)
lwz r8,VCORE_ENTRY_EXIT(r5)
clrldi r8,r8,56
li r0,1
sld r0,r0,r6
addi r6,r5,VCORE_NAPPING_THREADS
31: lwarx r4,0,r6
or r4,r4,r0
cmpw r4,r8
beq kvm_cede_exit
stwcx. r4,0,r6
bne 31b
/* order napping_threads update vs testing entry_exit_map */
isync
li r0,NAPPING_CEDE
stb r0,HSTATE_NAPPING(r13)
lwz r7,VCORE_ENTRY_EXIT(r5)
cmpwi r7,0x100
bge 33f /* another thread already exiting */
/*
* Although not specifically required by the architecture, POWER7
* preserves the following registers in nap mode, even if an SMT mode
* switch occurs: SLB entries, PURR, SPURR, AMOR, UAMOR, AMR, SPRG0-3,
* DAR, DSISR, DABR, DABRX, DSCR, PMCx, MMCRx, SIAR, SDAR.
*/
/* Save non-volatile GPRs */
std r14, VCPU_GPR(R14)(r3)
std r15, VCPU_GPR(R15)(r3)
std r16, VCPU_GPR(R16)(r3)
std r17, VCPU_GPR(R17)(r3)
std r18, VCPU_GPR(R18)(r3)
std r19, VCPU_GPR(R19)(r3)
std r20, VCPU_GPR(R20)(r3)
std r21, VCPU_GPR(R21)(r3)
std r22, VCPU_GPR(R22)(r3)
std r23, VCPU_GPR(R23)(r3)
std r24, VCPU_GPR(R24)(r3)
std r25, VCPU_GPR(R25)(r3)
std r26, VCPU_GPR(R26)(r3)
std r27, VCPU_GPR(R27)(r3)
std r28, VCPU_GPR(R28)(r3)
std r29, VCPU_GPR(R29)(r3)
std r30, VCPU_GPR(R30)(r3)
std r31, VCPU_GPR(R31)(r3)
/* save FP state */
bl kvmppc_save_fp
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
BEGIN_FTR_SECTION
ld r9, HSTATE_KVM_VCPU(r13)
bl kvmppc_save_tm
END_FTR_SECTION_IFSET(CPU_FTR_TM)
#endif
/*
* Set DEC to the smaller of DEC and HDEC, so that we wake
* no later than the end of our timeslice (HDEC interrupts
* don't wake us from nap).
*/
mfspr r3, SPRN_DEC
mfspr r4, SPRN_HDEC
mftb r5
cmpw r3, r4
ble 67f
mtspr SPRN_DEC, r4
67:
/* save expiry time of guest decrementer */
extsw r3, r3
add r3, r3, r5
ld r4, HSTATE_KVM_VCPU(r13)
ld r5, HSTATE_KVM_VCORE(r13)
ld r6, VCORE_TB_OFFSET(r5)
subf r3, r6, r3 /* convert to host TB value */
std r3, VCPU_DEC_EXPIRES(r4)
#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
ld r4, HSTATE_KVM_VCPU(r13)
addi r3, r4, VCPU_TB_CEDE
bl kvmhv_accumulate_time
#endif
lis r3, LPCR_PECEDP@h /* Do wake on privileged doorbell */
/*
* Take a nap until a decrementer or external or doobell interrupt
* occurs, with PECE1 and PECE0 set in LPCR.
* On POWER8, set PECEDH, and if we are ceding, also set PECEDP.
* Also clear the runlatch bit before napping.
*/
kvm_do_nap:
mfspr r0, SPRN_CTRLF
clrrdi r0, r0, 1
mtspr SPRN_CTRLT, r0
li r0,1
stb r0,HSTATE_HWTHREAD_REQ(r13)
mfspr r5,SPRN_LPCR
ori r5,r5,LPCR_PECE0 | LPCR_PECE1
BEGIN_FTR_SECTION
ori r5, r5, LPCR_PECEDH
rlwimi r5, r3, 0, LPCR_PECEDP
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
kvm_nap_sequence: /* desired LPCR value in r5 */
BEGIN_FTR_SECTION
/*
* PSSCR bits: exit criterion = 1 (wakeup based on LPCR at sreset)
* enable state loss = 1 (allow SMT mode switch)
* requested level = 0 (just stop dispatching)
*/
lis r3, (PSSCR_EC | PSSCR_ESL)@h
mtspr SPRN_PSSCR, r3
/* Set LPCR_PECE_HVEE bit to enable wakeup by HV interrupts */
li r4, LPCR_PECE_HVEE@higher
sldi r4, r4, 32
or r5, r5, r4
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
mtspr SPRN_LPCR,r5
isync
li r0, 0
std r0, HSTATE_SCRATCH0(r13)
ptesync
ld r0, HSTATE_SCRATCH0(r13)
1: cmpd r0, r0
bne 1b
BEGIN_FTR_SECTION
nap
FTR_SECTION_ELSE
PPC_STOP
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300)
b .
33: mr r4, r3
li r3, 0
li r12, 0
b 34f
kvm_end_cede:
/* get vcpu pointer */
ld r4, HSTATE_KVM_VCPU(r13)
/* Woken by external or decrementer interrupt */
ld r1, HSTATE_HOST_R1(r13)
#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
addi r3, r4, VCPU_TB_RMINTR
bl kvmhv_accumulate_time
#endif
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
BEGIN_FTR_SECTION
bl kvmppc_restore_tm
END_FTR_SECTION_IFSET(CPU_FTR_TM)
#endif
/* load up FP state */
bl kvmppc_load_fp
/* Restore guest decrementer */
ld r3, VCPU_DEC_EXPIRES(r4)
ld r5, HSTATE_KVM_VCORE(r13)
ld r6, VCORE_TB_OFFSET(r5)
add r3, r3, r6 /* convert host TB to guest TB value */
mftb r7
subf r3, r7, r3
mtspr SPRN_DEC, r3
/* Load NV GPRS */
ld r14, VCPU_GPR(R14)(r4)
ld r15, VCPU_GPR(R15)(r4)
ld r16, VCPU_GPR(R16)(r4)
ld r17, VCPU_GPR(R17)(r4)
ld r18, VCPU_GPR(R18)(r4)
ld r19, VCPU_GPR(R19)(r4)
ld r20, VCPU_GPR(R20)(r4)
ld r21, VCPU_GPR(R21)(r4)
ld r22, VCPU_GPR(R22)(r4)
ld r23, VCPU_GPR(R23)(r4)
ld r24, VCPU_GPR(R24)(r4)
ld r25, VCPU_GPR(R25)(r4)
ld r26, VCPU_GPR(R26)(r4)
ld r27, VCPU_GPR(R27)(r4)
ld r28, VCPU_GPR(R28)(r4)
ld r29, VCPU_GPR(R29)(r4)
ld r30, VCPU_GPR(R30)(r4)
ld r31, VCPU_GPR(R31)(r4)
/* Check the wake reason in SRR1 to see why we got here */
bl kvmppc_check_wake_reason
/*
* Restore volatile registers since we could have called a
* C routine in kvmppc_check_wake_reason
* r4 = VCPU
* r3 tells us whether we need to return to host or not
* WARNING: it gets checked further down:
* should not modify r3 until this check is done.
*/
ld r4, HSTATE_KVM_VCPU(r13)
/* clear our bit in vcore->napping_threads */
34: ld r5,HSTATE_KVM_VCORE(r13)
lbz r7,HSTATE_PTID(r13)
li r0,1
sld r0,r0,r7
addi r6,r5,VCORE_NAPPING_THREADS
32: lwarx r7,0,r6
andc r7,r7,r0
stwcx. r7,0,r6
bne 32b
li r0,0
stb r0,HSTATE_NAPPING(r13)
/* See if the wake reason saved in r3 means we need to exit */
stw r12, VCPU_TRAP(r4)
mr r9, r4
cmpdi r3, 0
bgt guest_exit_cont
/* see if any other thread is already exiting */
lwz r0,VCORE_ENTRY_EXIT(r5)
cmpwi r0,0x100
bge guest_exit_cont
b kvmppc_cede_reentry /* if not go back to guest */
/* cede when already previously prodded case */
kvm_cede_prodded:
li r0,0
stb r0,VCPU_PRODDED(r3)
sync /* order testing prodded vs. clearing ceded */
stb r0,VCPU_CEDED(r3)
li r3,H_SUCCESS
blr
/* we've ceded but we want to give control to the host */
kvm_cede_exit:
ld r9, HSTATE_KVM_VCPU(r13)
b guest_exit_cont
/* Try to handle a machine check in real mode */
machine_check_realmode:
mr r3, r9 /* get vcpu pointer */
bl kvmppc_realmode_machine_check
nop
ld r9, HSTATE_KVM_VCPU(r13)
li r12, BOOK3S_INTERRUPT_MACHINE_CHECK
/*
* Deliver unhandled/fatal (e.g. UE) MCE errors to guest through
* machine check interrupt (set HSRR0 to 0x200). And for handled
* errors (no-fatal), just go back to guest execution with current
* HSRR0 instead of exiting guest. This new approach will inject
* machine check to guest for fatal error causing guest to crash.
*
* The old code used to return to host for unhandled errors which
* was causing guest to hang with soft lockups inside guest and
* makes it difficult to recover guest instance.
*
* if we receive machine check with MSR(RI=0) then deliver it to
* guest as machine check causing guest to crash.
*/
ld r11, VCPU_MSR(r9)
rldicl. r0, r11, 64-MSR_HV_LG, 63 /* check if it happened in HV mode */
bne mc_cont /* if so, exit to host */
andi. r10, r11, MSR_RI /* check for unrecoverable exception */
beq 1f /* Deliver a machine check to guest */
ld r10, VCPU_PC(r9)
cmpdi r3, 0 /* Did we handle MCE ? */
bne 2f /* Continue guest execution. */
/* If not, deliver a machine check. SRR0/1 are already set */
1: li r10, BOOK3S_INTERRUPT_MACHINE_CHECK
bl kvmppc_msr_interrupt
2: b fast_interrupt_c_return
/*
* Check the reason we woke from nap, and take appropriate action.
* Returns (in r3):
* 0 if nothing needs to be done
* 1 if something happened that needs to be handled by the host
* -1 if there was a guest wakeup (IPI or msgsnd)
* -2 if we handled a PCI passthrough interrupt (returned by
* kvmppc_read_intr only)
*
* Also sets r12 to the interrupt vector for any interrupt that needs
* to be handled now by the host (0x500 for external interrupt), or zero.
* Modifies all volatile registers (since it may call a C function).
* This routine calls kvmppc_read_intr, a C function, if an external
* interrupt is pending.
*/
kvmppc_check_wake_reason:
mfspr r6, SPRN_SRR1
BEGIN_FTR_SECTION
rlwinm r6, r6, 45-31, 0xf /* extract wake reason field (P8) */
FTR_SECTION_ELSE
rlwinm r6, r6, 45-31, 0xe /* P7 wake reason field is 3 bits */
ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_207S)
cmpwi r6, 8 /* was it an external interrupt? */
beq 7f /* if so, see what it was */
li r3, 0
li r12, 0
cmpwi r6, 6 /* was it the decrementer? */
beq 0f
BEGIN_FTR_SECTION
cmpwi r6, 5 /* privileged doorbell? */
beq 0f
cmpwi r6, 3 /* hypervisor doorbell? */
beq 3f
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
cmpwi r6, 0xa /* Hypervisor maintenance ? */
beq 4f
li r3, 1 /* anything else, return 1 */
0: blr
/* hypervisor doorbell */
3: li r12, BOOK3S_INTERRUPT_H_DOORBELL
/*
* Clear the doorbell as we will invoke the handler
* explicitly in the guest exit path.
*/
lis r6, (PPC_DBELL_SERVER << (63-36))@h
PPC_MSGCLR(6)
/* see if it's a host IPI */
li r3, 1
lbz r0, HSTATE_HOST_IPI(r13)
cmpwi r0, 0
bnelr
/* if not, return -1 */
li r3, -1
blr
/* Woken up due to Hypervisor maintenance interrupt */
4: li r12, BOOK3S_INTERRUPT_HMI
li r3, 1
blr
/* external interrupt - create a stack frame so we can call C */
7: mflr r0
std r0, PPC_LR_STKOFF(r1)
stdu r1, -PPC_MIN_STKFRM(r1)
bl kvmppc_read_intr
nop
li r12, BOOK3S_INTERRUPT_EXTERNAL
cmpdi r3, 1
ble 1f
/*
* Return code of 2 means PCI passthrough interrupt, but
* we need to return back to host to complete handling the
* interrupt. Trap reason is expected in r12 by guest
* exit code.
*/
li r12, BOOK3S_INTERRUPT_HV_RM_HARD
1:
ld r0, PPC_MIN_STKFRM+PPC_LR_STKOFF(r1)
addi r1, r1, PPC_MIN_STKFRM
mtlr r0
blr
/*
* Save away FP, VMX and VSX registers.
* r3 = vcpu pointer
* N.B. r30 and r31 are volatile across this function,
* thus it is not callable from C.
*/
kvmppc_save_fp:
mflr r30
mr r31,r3
mfmsr r5
ori r8,r5,MSR_FP
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
oris r8,r8,MSR_VEC@h
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif
#ifdef CONFIG_VSX
BEGIN_FTR_SECTION
oris r8,r8,MSR_VSX@h
END_FTR_SECTION_IFSET(CPU_FTR_VSX)
#endif
mtmsrd r8
addi r3,r3,VCPU_FPRS
bl store_fp_state
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
addi r3,r31,VCPU_VRS
bl store_vr_state
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif
mfspr r6,SPRN_VRSAVE
stw r6,VCPU_VRSAVE(r31)
mtlr r30
blr
/*
* Load up FP, VMX and VSX registers
* r4 = vcpu pointer
* N.B. r30 and r31 are volatile across this function,
* thus it is not callable from C.
*/
kvmppc_load_fp:
mflr r30
mr r31,r4
mfmsr r9
ori r8,r9,MSR_FP
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
oris r8,r8,MSR_VEC@h
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif
#ifdef CONFIG_VSX
BEGIN_FTR_SECTION
oris r8,r8,MSR_VSX@h
END_FTR_SECTION_IFSET(CPU_FTR_VSX)
#endif
mtmsrd r8
addi r3,r4,VCPU_FPRS
bl load_fp_state
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
addi r3,r31,VCPU_VRS
bl load_vr_state
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif
lwz r7,VCPU_VRSAVE(r31)
mtspr SPRN_VRSAVE,r7
mtlr r30
mr r4,r31
blr
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
/*
* Save transactional state and TM-related registers.
* Called with r9 pointing to the vcpu struct.
* This can modify all checkpointed registers, but
* restores r1, r2 and r9 (vcpu pointer) before exit.
*/
kvmppc_save_tm:
mflr r0
std r0, PPC_LR_STKOFF(r1)
/* Turn on TM. */
mfmsr r8
li r0, 1
rldimi r8, r0, MSR_TM_LG, 63-MSR_TM_LG
mtmsrd r8
ld r5, VCPU_MSR(r9)
rldicl. r5, r5, 64 - MSR_TS_S_LG, 62
beq 1f /* TM not active in guest. */
std r1, HSTATE_HOST_R1(r13)
li r3, TM_CAUSE_KVM_RESCHED
/* Clear the MSR RI since r1, r13 are all going to be foobar. */
li r5, 0
mtmsrd r5, 1
/* All GPRs are volatile at this point. */
TRECLAIM(R3)
/* Temporarily store r13 and r9 so we have some regs to play with */
SET_SCRATCH0(r13)
GET_PACA(r13)
std r9, PACATMSCRATCH(r13)
ld r9, HSTATE_KVM_VCPU(r13)
/* Get a few more GPRs free. */
std r29, VCPU_GPRS_TM(29)(r9)
std r30, VCPU_GPRS_TM(30)(r9)
std r31, VCPU_GPRS_TM(31)(r9)
/* Save away PPR and DSCR soon so don't run with user values. */
mfspr r31, SPRN_PPR
HMT_MEDIUM
mfspr r30, SPRN_DSCR
ld r29, HSTATE_DSCR(r13)
mtspr SPRN_DSCR, r29
/* Save all but r9, r13 & r29-r31 */
reg = 0
.rept 29
.if (reg != 9) && (reg != 13)
std reg, VCPU_GPRS_TM(reg)(r9)
.endif
reg = reg + 1
.endr
/* ... now save r13 */
GET_SCRATCH0(r4)
std r4, VCPU_GPRS_TM(13)(r9)
/* ... and save r9 */
ld r4, PACATMSCRATCH(r13)
std r4, VCPU_GPRS_TM(9)(r9)
/* Reload stack pointer and TOC. */
ld r1, HSTATE_HOST_R1(r13)
ld r2, PACATOC(r13)
/* Set MSR RI now we have r1 and r13 back. */
li r5, MSR_RI
mtmsrd r5, 1
/* Save away checkpinted SPRs. */
std r31, VCPU_PPR_TM(r9)
std r30, VCPU_DSCR_TM(r9)
mflr r5
mfcr r6
mfctr r7
mfspr r8, SPRN_AMR
mfspr r10, SPRN_TAR
mfxer r11
std r5, VCPU_LR_TM(r9)
stw r6, VCPU_CR_TM(r9)
std r7, VCPU_CTR_TM(r9)
std r8, VCPU_AMR_TM(r9)
std r10, VCPU_TAR_TM(r9)
std r11, VCPU_XER_TM(r9)
/* Restore r12 as trap number. */
lwz r12, VCPU_TRAP(r9)
/* Save FP/VSX. */
addi r3, r9, VCPU_FPRS_TM
bl store_fp_state
addi r3, r9, VCPU_VRS_TM
bl store_vr_state
mfspr r6, SPRN_VRSAVE
stw r6, VCPU_VRSAVE_TM(r9)
1:
/*
* We need to save these SPRs after the treclaim so that the software
* error code is recorded correctly in the TEXASR. Also the user may
* change these outside of a transaction, so they must always be
* context switched.
*/
mfspr r5, SPRN_TFHAR
mfspr r6, SPRN_TFIAR
mfspr r7, SPRN_TEXASR
std r5, VCPU_TFHAR(r9)
std r6, VCPU_TFIAR(r9)
std r7, VCPU_TEXASR(r9)
ld r0, PPC_LR_STKOFF(r1)
mtlr r0
blr
/*
* Restore transactional state and TM-related registers.
* Called with r4 pointing to the vcpu struct.
* This potentially modifies all checkpointed registers.
* It restores r1, r2, r4 from the PACA.
*/
kvmppc_restore_tm:
mflr r0
std r0, PPC_LR_STKOFF(r1)
/* Turn on TM/FP/VSX/VMX so we can restore them. */
mfmsr r5
li r6, MSR_TM >> 32
sldi r6, r6, 32
or r5, r5, r6
ori r5, r5, MSR_FP
oris r5, r5, (MSR_VEC | MSR_VSX)@h
mtmsrd r5
/*
* The user may change these outside of a transaction, so they must
* always be context switched.
*/
ld r5, VCPU_TFHAR(r4)
ld r6, VCPU_TFIAR(r4)
ld r7, VCPU_TEXASR(r4)
mtspr SPRN_TFHAR, r5
mtspr SPRN_TFIAR, r6
mtspr SPRN_TEXASR, r7
ld r5, VCPU_MSR(r4)
rldicl. r5, r5, 64 - MSR_TS_S_LG, 62
beqlr /* TM not active in guest */
std r1, HSTATE_HOST_R1(r13)
/* Make sure the failure summary is set, otherwise we'll program check
* when we trechkpt. It's possible that this might have been not set
* on a kvmppc_set_one_reg() call but we shouldn't let this crash the
* host.
*/
oris r7, r7, (TEXASR_FS)@h
mtspr SPRN_TEXASR, r7
/*
* We need to load up the checkpointed state for the guest.
* We need to do this early as it will blow away any GPRs, VSRs and
* some SPRs.
*/
mr r31, r4
addi r3, r31, VCPU_FPRS_TM
bl load_fp_state
addi r3, r31, VCPU_VRS_TM
bl load_vr_state
mr r4, r31
lwz r7, VCPU_VRSAVE_TM(r4)
mtspr SPRN_VRSAVE, r7
ld r5, VCPU_LR_TM(r4)
lwz r6, VCPU_CR_TM(r4)
ld r7, VCPU_CTR_TM(r4)
ld r8, VCPU_AMR_TM(r4)
ld r9, VCPU_TAR_TM(r4)
ld r10, VCPU_XER_TM(r4)
mtlr r5
mtcr r6
mtctr r7
mtspr SPRN_AMR, r8
mtspr SPRN_TAR, r9
mtxer r10
/*
* Load up PPR and DSCR values but don't put them in the actual SPRs
* till the last moment to avoid running with userspace PPR and DSCR for
* too long.
*/
ld r29, VCPU_DSCR_TM(r4)
ld r30, VCPU_PPR_TM(r4)
std r2, PACATMSCRATCH(r13) /* Save TOC */
/* Clear the MSR RI since r1, r13 are all going to be foobar. */
li r5, 0
mtmsrd r5, 1
/* Load GPRs r0-r28 */
reg = 0
.rept 29
ld reg, VCPU_GPRS_TM(reg)(r31)
reg = reg + 1
.endr
mtspr SPRN_DSCR, r29
mtspr SPRN_PPR, r30
/* Load final GPRs */
ld 29, VCPU_GPRS_TM(29)(r31)
ld 30, VCPU_GPRS_TM(30)(r31)
ld 31, VCPU_GPRS_TM(31)(r31)
/* TM checkpointed state is now setup. All GPRs are now volatile. */
TRECHKPT
/* Now let's get back the state we need. */
HMT_MEDIUM
GET_PACA(r13)
ld r29, HSTATE_DSCR(r13)
mtspr SPRN_DSCR, r29
ld r4, HSTATE_KVM_VCPU(r13)
ld r1, HSTATE_HOST_R1(r13)
ld r2, PACATMSCRATCH(r13)
/* Set the MSR RI since we have our registers back. */
li r5, MSR_RI
mtmsrd r5, 1
ld r0, PPC_LR_STKOFF(r1)
mtlr r0
blr
#endif
/*
* We come here if we get any exception or interrupt while we are
* executing host real mode code while in guest MMU context.
* For now just spin, but we should do something better.
*/
kvmppc_bad_host_intr:
b .
/*
* This mimics the MSR transition on IRQ delivery. The new guest MSR is taken
* from VCPU_INTR_MSR and is modified based on the required TM state changes.
* r11 has the guest MSR value (in/out)
* r9 has a vcpu pointer (in)
* r0 is used as a scratch register
*/
kvmppc_msr_interrupt:
rldicl r0, r11, 64 - MSR_TS_S_LG, 62
cmpwi r0, 2 /* Check if we are in transactional state.. */
ld r11, VCPU_INTR_MSR(r9)
bne 1f
/* ... if transactional, change to suspended */
li r0, 1
1: rldimi r11, r0, MSR_TS_S_LG, 63 - MSR_TS_T_LG
blr
/*
* This works around a hardware bug on POWER8E processors, where
* writing a 1 to the MMCR0[PMAO] bit doesn't generate a
* performance monitor interrupt. Instead, when we need to have
* an interrupt pending, we have to arrange for a counter to overflow.
*/
kvmppc_fix_pmao:
li r3, 0
mtspr SPRN_MMCR2, r3
lis r3, (MMCR0_PMXE | MMCR0_FCECE)@h
ori r3, r3, MMCR0_PMCjCE | MMCR0_C56RUN
mtspr SPRN_MMCR0, r3
lis r3, 0x7fff
ori r3, r3, 0xffff
mtspr SPRN_PMC6, r3
isync
blr
#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
/*
* Start timing an activity
* r3 = pointer to time accumulation struct, r4 = vcpu
*/
kvmhv_start_timing:
ld r5, HSTATE_KVM_VCORE(r13)
lbz r6, VCORE_IN_GUEST(r5)
cmpwi r6, 0
beq 5f /* if in guest, need to */
ld r6, VCORE_TB_OFFSET(r5) /* subtract timebase offset */
5: mftb r5
subf r5, r6, r5
std r3, VCPU_CUR_ACTIVITY(r4)
std r5, VCPU_ACTIVITY_START(r4)
blr
/*
* Accumulate time to one activity and start another.
* r3 = pointer to new time accumulation struct, r4 = vcpu
*/
kvmhv_accumulate_time:
ld r5, HSTATE_KVM_VCORE(r13)
lbz r8, VCORE_IN_GUEST(r5)
cmpwi r8, 0
beq 4f /* if in guest, need to */
ld r8, VCORE_TB_OFFSET(r5) /* subtract timebase offset */
4: ld r5, VCPU_CUR_ACTIVITY(r4)
ld r6, VCPU_ACTIVITY_START(r4)
std r3, VCPU_CUR_ACTIVITY(r4)
mftb r7
subf r7, r8, r7
std r7, VCPU_ACTIVITY_START(r4)
cmpdi r5, 0
beqlr
subf r3, r6, r7
ld r8, TAS_SEQCOUNT(r5)
cmpdi r8, 0
addi r8, r8, 1
std r8, TAS_SEQCOUNT(r5)
lwsync
ld r7, TAS_TOTAL(r5)
add r7, r7, r3
std r7, TAS_TOTAL(r5)
ld r6, TAS_MIN(r5)
ld r7, TAS_MAX(r5)
beq 3f
cmpd r3, r6
bge 1f
3: std r3, TAS_MIN(r5)
1: cmpd r3, r7
ble 2f
std r3, TAS_MAX(r5)
2: lwsync
addi r8, r8, 1
std r8, TAS_SEQCOUNT(r5)
blr
#endif