Sergey Organov a25aee902e serial: imx: set_termios(): do not enable autoRTS if RTS is unset ... Don't let receiver hardware automatically control RTS output if it was requested to be inactive. To ensure this, set_termios() shouldn't set UCR2_CTSC bit if UCR2_CTS (=TIOCM_RTS) is cleared. Added corresponding check in imx_uart_rts_auto() to fix this. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/1564167161-3972-2-git-send-email-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2019-09-04 12:43:46 +02:00
..
8250	serial: 8250_pnp: Move to struct dev_pm_ops	2019-09-04 12:43:46 +02:00
cpm_uart	tty: cpm_uart: drop unused iflag macro	2019-05-24 10:09:16 +02:00
jsm	tty: add SPDX identifiers to Kconfig and Makefiles	2019-04-04 18:48:43 +02:00
21285.c
altera_jtaguart.c
altera_uart.c
amba-pl010.c
amba-pl011.c	tty: amba-pl011: allow shared interrupt	2019-05-21 12:12:03 +02:00
amba-pl011.h
apbuart.c
apbuart.h
ar933x_uart.c	serial: ar933x_uart: Fix build failure with disabled console	2019-03-19 15:37:44 +01:00
arc_uart.c
atmel_serial.c	tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped	2019-03-28 00:27:48 +09:00
atmel_serial.h
bcm63xx_uart.c
clps711x.c	serial: clps711x: Remove board support	2019-01-08 16:55:18 +01:00
digicolor-usart.c	tty/serial: digicolor: Fix digicolor-usart already registered warning	2019-06-10 19:08:31 +02:00
dz.c
dz.h
earlycon-arm-semihost.c
earlycon-riscv-sbi.c	tty/serial: use uart_console_write in the RISC-V SBL early console	2019-01-23 15:41:50 -08:00
earlycon.c
efm32-uart.c
fsl_lpuart.c	tty: serial: fsl_lpuart: correct the FIFO depth size	2019-09-04 12:43:45 +02:00
icom.c	tty: serial: Remove call to memset after pci_alloc_consistent	2019-09-04 12:43:44 +02:00
icom.h
ifx6x60.c
ifx6x60.h
imx.c	serial: imx: set_termios(): do not enable autoRTS if RTS is unset	2019-09-04 12:43:46 +02:00
ioc3_serial.c
ioc4_serial.c
ip22zilog.c
ip22zilog.h
Kconfig	tty: serial: netx: Delete driver	2019-07-25 12:05:28 +02:00
kgdb_nmi.c
kgdboc.c	kgdboc: disable the console lock when in kgdb	2019-07-30 17:39:39 +02:00
lantiq.c	serial: lantiq: Do not swap register read/writes	2019-01-08 16:53:36 +01:00
lpc32xx_hs.c	tty: serial: lpc32xx_hs: fix missing console boot messages	2019-01-18 11:23:00 +01:00
Makefile	tty: serial: netx: Delete driver	2019-07-25 12:05:28 +02:00
max310x.c	Merge 5.2-rc3 into tty-next	2019-06-03 13:53:20 +02:00
max3100.c
mcf.c
men_z135_uart.c	drivers: Remove explicit invocations of mmiowb()	2019-04-08 12:01:02 +01:00
meson_uart.c	tty: serial: meson: if no alias specified use an available id	2019-01-18 11:22:22 +01:00
milbeaut_usio.c	serial: milbeaut_usio: Fix error handling in probe and remove	2019-04-29 16:20:24 +02:00
mpc52xx_uart.c
mps2-uart.c	serial: mps2-uart: Add parentheses around conditional in mps2_uart_shutdown	2019-01-31 19:34:10 +01:00
msm_serial.c	tty: serial: msm_serial: avoid system lockup condition	2019-06-10 19:42:35 +02:00
mux.c
mvebu-uart.c	serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference	2019-03-19 15:37:43 +01:00
mxs-auart.c	tty: mxs-auart: fix a potential NULL pointer dereference	2019-03-19 15:37:43 +01:00
omap-serial.c
owl-uart.c
pch_uart.c	PCI: Move Rohm Vendor ID to generic list	2019-02-01 17:24:52 -06:00
pic32_uart.c	serial: set suppress_bind_attrs flag only if builtin	2018-11-09 09:07:17 -08:00
pic32_uart.h
pmac_zilog.c	tty: Use of_node_name_{eq,prefix} for node name comparisons	2018-12-17 16:12:17 +01:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c
qcom_geni_serial.c	tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setup	2019-03-19 15:37:44 +01:00
rda-uart.c	tty: serial: Add RDA8810PL UART driver	2018-12-31 13:10:01 -08:00
rp2.c
sa1100.c	serial: sa1100: add note about modem control signals	2019-06-04 12:56:33 +01:00
samsung.c	tty: serial: samsung: Enable baud clock during initialisation	2019-02-19 13:42:08 +01:00
samsung.h
sb1250-duart.c
sc16is7xx.c	Merge 5.1-rc6 into tty-next	2019-04-21 23:20:08 +02:00
sccnxp.c	serial: sccnxp: Allow to use non-standard baud rates	2018-12-20 16:26:59 +01:00
serial_core.c	tty: serial_core: Set port active bit in uart_port_activate	2019-06-18 09:52:26 +02:00
serial_ks8695.c
serial_mctrl_gpio.c	serial: mctrl_gpio: Check if GPIO property exisits before requesting it	2019-06-21 10:18:43 +02:00
serial_mctrl_gpio.h
serial_txx9.c	drivers: Remove explicit invocations of mmiowb()	2019-04-08 12:01:02 +01:00
serial-tegra.c	serial: tegra: fix some spelling mistakes	2018-11-09 08:58:18 -08:00
sh-sci.c	serial: sh-sci: Terminate TX DMA during buffer flushing	2019-07-03 19:31:30 +02:00
sh-sci.h
sifive.c	tty: serial: add driver for the SiFive UART	2019-04-29 16:30:59 +02:00
sirfsoc_uart.c
sirfsoc_uart.h
sn_console.c	tty: fix up a few remaining files without SPDX identifiers	2019-04-04 18:48:43 +02:00
sprd_serial.c	serial: sprd: Fix a copy-paste err in sprd_request_dma()	2019-04-16 15:21:33 +02:00
st-asc.c
stm32-usart.c	serial: stm32: Use __maybe_unused instead of #if CONFIG_PM_SLEEP	2019-09-04 12:43:46 +02:00
stm32-usart.h	serial: stm32: add support of RX FIFO threshold	2019-06-21 11:17:36 +02:00
suncore.c	tty: Use of_node_name_{eq,prefix} for node name comparisons	2018-12-17 16:12:17 +01:00
sunhv.c	sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg	2019-06-13 14:04:37 -07:00
sunsab.c
sunsab.h
sunsu.c	TTY/Serial driver patches for 4.21-rc1	2018-12-28 20:33:54 -08:00
sunzilog.c
sunzilog.h
tegra-tcu.c	serial: Add Tegra Combined UART driver	2019-01-30 09:31:31 +01:00
timbuart.c
timbuart.h
uartlite.c	serial-uartlite: fix null pointer dereference on pointer port	2018-11-27 09:08:15 +01:00
ucc_uart.c	docs: serial: move it to the driver-api	2019-07-15 11:03:03 -03:00
vr41xx_siu.c
vt8500_serial.c
xilinx_uartps.c	serial: uartps: Remove useless return from cdns_uart_poll_put_char	2019-06-18 09:34:28 +02:00
zs.c
zs.h