linux_dsm_epyc7002/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
Fabio Estevam 76368cca63 ARM: dts: imx6ul-ccimx6ulsom: Add memory node to board dts
Add memory node to board dts.

This is done in preparation of removing the memory node from imx6ul.dtsi.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10 10:02:25 +08:00

271 lines
6.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0
/*
* Digi International's ConnectCore 6UL System-On-Module device tree source
*
* Copyright 2018 Digi International, Inc.
*
*/
/ {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0>; /* will be filled by U-Boot */
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
linux,cma {
compatible = "shared-dma-pool";
reusable;
size = <0x4000000>;
linux,cma-default;
};
};
};
&adc1 {
vref-supply = <&vdda_adc_3v3>;
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pfuze3000: pmic@8 {
compatible = "fsl,pfuze3000";
reg = <0x08>;
regulators {
int_3v3: sw1a {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <6250>;
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_arm_soc_in: sw1b {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1475000>;
regulator-ramp-delay = <6250>;
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <925000>;
};
};
ext_3v3: sw2 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <6250>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr3: sw3 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1650000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1300000>;
};
};
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
};
vdd_snvs_3v3: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
vrefddr: vrefddr {
regulator-boot-on;
regulator-always-on;
};
vdda_adc_3v3: vldo1 {
compatible = "regulator-fixed";
regulator-name = "vref-adc-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
ldo2_ext: vldo2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vdda_wlan: vccsd {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_high_in: v33 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo3_int: vldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
ldo4_ext: vldo4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
vcoin_chg: vcoin {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <3300000>;
};
};
};
};
/* UART1 (Bluetooth) */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
uart-has-rtscts;
status = "okay";
};
/* USDHC1 (Wireless) */
&usdhc1 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_wifibt_ctrl>;
pinctrl-1 = <&pinctrl_usdhc1_sleep &pinctrl_wifibt_ctrl_sleep>;
non-removable;
no-1-8-v;
bus-width = <4>;
status = "okay";
};
&iomuxc {
pinctrl_gpmi_nand: gpmigrp {
fsl,pins = <
MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb0b1
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x1b0b1
MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x1b0b1
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17051
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
>;
};
pinctrl_usdhc1_sleep: usdhc1grp-sleep {
fsl,pins = <
MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x3000
MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x3000
MX6UL_PAD_SD1_DATA0__GPIO2_IO18 0x3000
MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x3000
MX6UL_PAD_SD1_DATA2__GPIO2_IO20 0x3000
MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x3000
>;
};
pinctrl_wifibt_ctrl: wifibt-ctrl-grp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x08a0
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x08a0
>;
};
pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-grp-sleep {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x3000
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x3000
>;
};
};
&reg_arm {
vin-supply = <&vdd_arm_soc_in>;
regulator-allow-bypass;
};
&reg_soc {
vin-supply = <&vdd_arm_soc_in>;
regulator-allow-bypass;
};