mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 21:55:10 +07:00
83e82f4c70
Support for Wake-on-LAN using Magic Packet with or without SecureOn password is implemented doing the following: - setting the password to the relevant UniMAC registers - flagging the device as a wakeup source for the system, as well as its Wake-on-LAN interrupt - prepare the hardware for entering WoL mode - enabling the MPD interrupt to wake us The Device Tree binding documentation is also reflected to specify the third optional Wake-on-LAN interrupt line. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
31 lines
1.2 KiB
Plaintext
31 lines
1.2 KiB
Plaintext
* Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
|
|
|
|
Required properties:
|
|
- compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport"
|
|
- reg: address and length of the register set for the device.
|
|
- interrupts: interrupts for the device, first cell must be for the the rx
|
|
interrupts, and the second cell should be for the transmit queues. An
|
|
optional third interrupt cell for Wake-on-LAN can be specified
|
|
- local-mac-address: Ethernet MAC address (48 bits) of this adapter
|
|
- phy-mode: Should be a string describing the PHY interface to the
|
|
Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt
|
|
- fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for
|
|
the property specific details
|
|
|
|
Optional properties:
|
|
- systemport,num-tier2-arb: number of tier 2 arbiters, an integer
|
|
- systemport,num-tier1-arb: number of tier 1 arbiters, an integer
|
|
- systemport,num-txq: number of HW transmit queues, an integer
|
|
- systemport,num-rxq: number of HW receive queues, an integer
|
|
|
|
Example:
|
|
ethernet@f04a0000 {
|
|
compatible = "brcm,systemport-v1.00";
|
|
reg = <0xf04a0000 0x4650>;
|
|
local-mac-address = [ 00 11 22 33 44 55 ];
|
|
fixed-link = <0 1 1000 0 0>;
|
|
phy-mode = "gmii";
|
|
interrupts = <0x0 0x16 0x0>,
|
|
<0x0 0x17 0x0>;
|
|
};
|