mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-12 09:26:44 +07:00
782fa5201a
Add DT binding documentation for lpc1850-creg-clk driver. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
53 lines
1.3 KiB
Plaintext
53 lines
1.3 KiB
Plaintext
* NXP LPC1850 CREG clocks
|
|
|
|
The NXP LPC18xx/43xx CREG (Configuration Registers) block contains
|
|
control registers for two low speed clocks. One of the clocks is a
|
|
32 kHz oscillator driver with power up/down and clock gating. Next
|
|
is a fixed divider that creates a 1 kHz clock from the 32 kHz osc.
|
|
|
|
These clocks are used by the RTC and the Event Router peripherials.
|
|
The 32 kHz can also be routed to other peripherials to enable low
|
|
power modes.
|
|
|
|
This binding uses the common clock binding:
|
|
Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
|
|
Required properties:
|
|
- compatible:
|
|
Should be "nxp,lpc1850-creg-clk"
|
|
- #clock-cells:
|
|
Shall have value <1>.
|
|
- clocks:
|
|
Shall contain a phandle to the fixed 32 kHz crystal.
|
|
|
|
The creg-clk node must be a child of the creg syscon node.
|
|
|
|
The following clocks are available from the clock node.
|
|
|
|
Clock ID Name
|
|
0 1 kHz clock
|
|
1 32 kHz Oscillator
|
|
|
|
Example:
|
|
soc {
|
|
creg: syscon@40043000 {
|
|
compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
|
|
reg = <0x40043000 0x1000>;
|
|
|
|
creg_clk: clock-controller {
|
|
compatible = "nxp,lpc1850-creg-clk";
|
|
clocks = <&xtal32>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
...
|
|
};
|
|
|
|
rtc: rtc@40046000 {
|
|
...
|
|
clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
|
|
clock-names = "rtc", "reg";
|
|
...
|
|
};
|
|
};
|