mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 08:05:26 +07:00
f4458b92d2
The commit fbf68229ff ("net: stmmac: unify registers dumps methods")
in the Linux kernel modified the register dump to store the DMA registers
at the DMA register offset (0x1000) but ethtool (stmmac.c) looks for the
DMA registers after the MAC registers which is offset 55.
This patch copies the DMA registers from the higher offset to the offset
where ethtool expects them.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
273 lines
8.1 KiB
C
273 lines
8.1 KiB
C
/*******************************************************************************
|
|
This is the driver for the GMAC on-chip Ethernet controller for ST SoCs.
|
|
DWC Ether MAC 10/100/1000 Universal version 3.41a has been used for
|
|
developing this code.
|
|
|
|
This contains the functions to handle the dma.
|
|
|
|
Copyright (C) 2007-2009 STMicroelectronics Ltd
|
|
|
|
This program is free software; you can redistribute it and/or modify it
|
|
under the terms and conditions of the GNU General Public License,
|
|
version 2, as published by the Free Software Foundation.
|
|
|
|
This program is distributed in the hope it will be useful, but WITHOUT
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
more details.
|
|
|
|
The full GNU General Public License is included in this distribution in
|
|
the file called "COPYING".
|
|
|
|
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
|
|
*******************************************************************************/
|
|
|
|
#include <asm/io.h>
|
|
#include "dwmac1000.h"
|
|
#include "dwmac_dma.h"
|
|
|
|
static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
|
|
{
|
|
u32 value = readl(ioaddr + DMA_AXI_BUS_MODE);
|
|
int i;
|
|
|
|
pr_info("dwmac1000: Master AXI performs %s burst length\n",
|
|
!(value & DMA_AXI_UNDEF) ? "fixed" : "any");
|
|
|
|
if (axi->axi_lpi_en)
|
|
value |= DMA_AXI_EN_LPI;
|
|
if (axi->axi_xit_frm)
|
|
value |= DMA_AXI_LPI_XIT_FRM;
|
|
|
|
value &= ~DMA_AXI_WR_OSR_LMT;
|
|
value |= (axi->axi_wr_osr_lmt & DMA_AXI_WR_OSR_LMT_MASK) <<
|
|
DMA_AXI_WR_OSR_LMT_SHIFT;
|
|
|
|
value &= ~DMA_AXI_RD_OSR_LMT;
|
|
value |= (axi->axi_rd_osr_lmt & DMA_AXI_RD_OSR_LMT_MASK) <<
|
|
DMA_AXI_RD_OSR_LMT_SHIFT;
|
|
|
|
/* Depending on the UNDEF bit the Master AXI will perform any burst
|
|
* length according to the BLEN programmed (by default all BLEN are
|
|
* set).
|
|
*/
|
|
for (i = 0; i < AXI_BLEN; i++) {
|
|
switch (axi->axi_blen[i]) {
|
|
case 256:
|
|
value |= DMA_AXI_BLEN256;
|
|
break;
|
|
case 128:
|
|
value |= DMA_AXI_BLEN128;
|
|
break;
|
|
case 64:
|
|
value |= DMA_AXI_BLEN64;
|
|
break;
|
|
case 32:
|
|
value |= DMA_AXI_BLEN32;
|
|
break;
|
|
case 16:
|
|
value |= DMA_AXI_BLEN16;
|
|
break;
|
|
case 8:
|
|
value |= DMA_AXI_BLEN8;
|
|
break;
|
|
case 4:
|
|
value |= DMA_AXI_BLEN4;
|
|
break;
|
|
}
|
|
}
|
|
|
|
writel(value, ioaddr + DMA_AXI_BUS_MODE);
|
|
}
|
|
|
|
static void dwmac1000_dma_init(void __iomem *ioaddr,
|
|
struct stmmac_dma_cfg *dma_cfg,
|
|
u32 dma_tx, u32 dma_rx, int atds)
|
|
{
|
|
u32 value = readl(ioaddr + DMA_BUS_MODE);
|
|
int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
|
|
int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
|
|
|
|
/*
|
|
* Set the DMA PBL (Programmable Burst Length) mode.
|
|
*
|
|
* Note: before stmmac core 3.50 this mode bit was 4xPBL, and
|
|
* post 3.5 mode bit acts as 8*PBL.
|
|
*/
|
|
if (dma_cfg->pblx8)
|
|
value |= DMA_BUS_MODE_MAXPBL;
|
|
value |= DMA_BUS_MODE_USP;
|
|
value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK);
|
|
value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT);
|
|
value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
|
|
|
|
/* Set the Fixed burst mode */
|
|
if (dma_cfg->fixed_burst)
|
|
value |= DMA_BUS_MODE_FB;
|
|
|
|
/* Mixed Burst has no effect when fb is set */
|
|
if (dma_cfg->mixed_burst)
|
|
value |= DMA_BUS_MODE_MB;
|
|
|
|
if (atds)
|
|
value |= DMA_BUS_MODE_ATDS;
|
|
|
|
if (dma_cfg->aal)
|
|
value |= DMA_BUS_MODE_AAL;
|
|
|
|
writel(value, ioaddr + DMA_BUS_MODE);
|
|
|
|
/* Mask interrupts by writing to CSR7 */
|
|
writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
|
|
|
|
/* RX/TX descriptor base address lists must be written into
|
|
* DMA CSR3 and CSR4, respectively
|
|
*/
|
|
writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
|
|
writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
|
|
}
|
|
|
|
static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz)
|
|
{
|
|
csr6 &= ~DMA_CONTROL_RFA_MASK;
|
|
csr6 &= ~DMA_CONTROL_RFD_MASK;
|
|
|
|
/* Leave flow control disabled if receive fifo size is less than
|
|
* 4K or 0. Otherwise, send XOFF when fifo is 1K less than full,
|
|
* and send XON when 2K less than full.
|
|
*/
|
|
if (rxfifosz < 4096) {
|
|
csr6 &= ~DMA_CONTROL_EFC;
|
|
pr_debug("GMAC: disabling flow control, rxfifo too small(%d)\n",
|
|
rxfifosz);
|
|
} else {
|
|
csr6 |= DMA_CONTROL_EFC;
|
|
csr6 |= RFA_FULL_MINUS_1K;
|
|
csr6 |= RFD_FULL_MINUS_2K;
|
|
}
|
|
return csr6;
|
|
}
|
|
|
|
static void dwmac1000_dma_operation_mode(void __iomem *ioaddr, int txmode,
|
|
int rxmode, int rxfifosz)
|
|
{
|
|
u32 csr6 = readl(ioaddr + DMA_CONTROL);
|
|
|
|
if (txmode == SF_DMA_MODE) {
|
|
pr_debug("GMAC: enable TX store and forward mode\n");
|
|
/* Transmit COE type 2 cannot be done in cut-through mode. */
|
|
csr6 |= DMA_CONTROL_TSF;
|
|
/* Operating on second frame increase the performance
|
|
* especially when transmit store-and-forward is used.
|
|
*/
|
|
csr6 |= DMA_CONTROL_OSF;
|
|
} else {
|
|
pr_debug("GMAC: disabling TX SF (threshold %d)\n", txmode);
|
|
csr6 &= ~DMA_CONTROL_TSF;
|
|
csr6 &= DMA_CONTROL_TC_TX_MASK;
|
|
/* Set the transmit threshold */
|
|
if (txmode <= 32)
|
|
csr6 |= DMA_CONTROL_TTC_32;
|
|
else if (txmode <= 64)
|
|
csr6 |= DMA_CONTROL_TTC_64;
|
|
else if (txmode <= 128)
|
|
csr6 |= DMA_CONTROL_TTC_128;
|
|
else if (txmode <= 192)
|
|
csr6 |= DMA_CONTROL_TTC_192;
|
|
else
|
|
csr6 |= DMA_CONTROL_TTC_256;
|
|
}
|
|
|
|
if (rxmode == SF_DMA_MODE) {
|
|
pr_debug("GMAC: enable RX store and forward mode\n");
|
|
csr6 |= DMA_CONTROL_RSF;
|
|
} else {
|
|
pr_debug("GMAC: disable RX SF mode (threshold %d)\n", rxmode);
|
|
csr6 &= ~DMA_CONTROL_RSF;
|
|
csr6 &= DMA_CONTROL_TC_RX_MASK;
|
|
if (rxmode <= 32)
|
|
csr6 |= DMA_CONTROL_RTC_32;
|
|
else if (rxmode <= 64)
|
|
csr6 |= DMA_CONTROL_RTC_64;
|
|
else if (rxmode <= 96)
|
|
csr6 |= DMA_CONTROL_RTC_96;
|
|
else
|
|
csr6 |= DMA_CONTROL_RTC_128;
|
|
}
|
|
|
|
/* Configure flow control based on rx fifo size */
|
|
csr6 = dwmac1000_configure_fc(csr6, rxfifosz);
|
|
|
|
writel(csr6, ioaddr + DMA_CONTROL);
|
|
}
|
|
|
|
static void dwmac1000_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_DWMAC1000_DMA_REGS; i++)
|
|
if ((i < 12) || (i > 17))
|
|
reg_space[DMA_BUS_MODE / 4 + i] =
|
|
readl(ioaddr + DMA_BUS_MODE + i * 4);
|
|
}
|
|
|
|
static void dwmac1000_get_hw_feature(void __iomem *ioaddr,
|
|
struct dma_features *dma_cap)
|
|
{
|
|
u32 hw_cap = readl(ioaddr + DMA_HW_FEATURE);
|
|
|
|
dma_cap->mbps_10_100 = (hw_cap & DMA_HW_FEAT_MIISEL);
|
|
dma_cap->mbps_1000 = (hw_cap & DMA_HW_FEAT_GMIISEL) >> 1;
|
|
dma_cap->half_duplex = (hw_cap & DMA_HW_FEAT_HDSEL) >> 2;
|
|
dma_cap->hash_filter = (hw_cap & DMA_HW_FEAT_HASHSEL) >> 4;
|
|
dma_cap->multi_addr = (hw_cap & DMA_HW_FEAT_ADDMAC) >> 5;
|
|
dma_cap->pcs = (hw_cap & DMA_HW_FEAT_PCSSEL) >> 6;
|
|
dma_cap->sma_mdio = (hw_cap & DMA_HW_FEAT_SMASEL) >> 8;
|
|
dma_cap->pmt_remote_wake_up = (hw_cap & DMA_HW_FEAT_RWKSEL) >> 9;
|
|
dma_cap->pmt_magic_frame = (hw_cap & DMA_HW_FEAT_MGKSEL) >> 10;
|
|
/* MMC */
|
|
dma_cap->rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11;
|
|
/* IEEE 1588-2002 */
|
|
dma_cap->time_stamp =
|
|
(hw_cap & DMA_HW_FEAT_TSVER1SEL) >> 12;
|
|
/* IEEE 1588-2008 */
|
|
dma_cap->atime_stamp = (hw_cap & DMA_HW_FEAT_TSVER2SEL) >> 13;
|
|
/* 802.3az - Energy-Efficient Ethernet (EEE) */
|
|
dma_cap->eee = (hw_cap & DMA_HW_FEAT_EEESEL) >> 14;
|
|
dma_cap->av = (hw_cap & DMA_HW_FEAT_AVSEL) >> 15;
|
|
/* TX and RX csum */
|
|
dma_cap->tx_coe = (hw_cap & DMA_HW_FEAT_TXCOESEL) >> 16;
|
|
dma_cap->rx_coe_type1 = (hw_cap & DMA_HW_FEAT_RXTYP1COE) >> 17;
|
|
dma_cap->rx_coe_type2 = (hw_cap & DMA_HW_FEAT_RXTYP2COE) >> 18;
|
|
dma_cap->rxfifo_over_2048 = (hw_cap & DMA_HW_FEAT_RXFIFOSIZE) >> 19;
|
|
/* TX and RX number of channels */
|
|
dma_cap->number_rx_channel = (hw_cap & DMA_HW_FEAT_RXCHCNT) >> 20;
|
|
dma_cap->number_tx_channel = (hw_cap & DMA_HW_FEAT_TXCHCNT) >> 22;
|
|
/* Alternate (enhanced) DESC mode */
|
|
dma_cap->enh_desc = (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24;
|
|
}
|
|
|
|
static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt,
|
|
u32 number_chan)
|
|
{
|
|
writel(riwt, ioaddr + DMA_RX_WATCHDOG);
|
|
}
|
|
|
|
const struct stmmac_dma_ops dwmac1000_dma_ops = {
|
|
.reset = dwmac_dma_reset,
|
|
.init = dwmac1000_dma_init,
|
|
.axi = dwmac1000_dma_axi,
|
|
.dump_regs = dwmac1000_dump_dma_regs,
|
|
.dma_mode = dwmac1000_dma_operation_mode,
|
|
.enable_dma_transmission = dwmac_enable_dma_transmission,
|
|
.enable_dma_irq = dwmac_enable_dma_irq,
|
|
.disable_dma_irq = dwmac_disable_dma_irq,
|
|
.start_tx = dwmac_dma_start_tx,
|
|
.stop_tx = dwmac_dma_stop_tx,
|
|
.start_rx = dwmac_dma_start_rx,
|
|
.stop_rx = dwmac_dma_stop_rx,
|
|
.dma_interrupt = dwmac_dma_interrupt,
|
|
.get_hw_feature = dwmac1000_get_hw_feature,
|
|
.rx_watchdog = dwmac1000_rx_watchdog,
|
|
};
|