linux_dsm_epyc7002/include/linux/irq.h
David Woodhouse 62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00

196 lines
4.9 KiB
C

#ifndef __irq_h
#define __irq_h
/*
* Please do not include this file in generic code. There is currently
* no requirement for any architecture to implement anything held
* within this file.
*
* Thanks. --rmk
*/
#include <linux/smp.h>
#if !defined(CONFIG_S390)
#include <linux/linkage.h>
#include <linux/cache.h>
#include <linux/spinlock.h>
#include <linux/cpumask.h>
#include <asm/irq.h>
#include <asm/ptrace.h>
/*
* IRQ line status.
*/
#define IRQ_INPROGRESS 1 /* IRQ handler active - do not enter! */
#define IRQ_DISABLED 2 /* IRQ disabled - do not enter! */
#define IRQ_PENDING 4 /* IRQ pending - replay on enable */
#define IRQ_REPLAY 8 /* IRQ has been replayed but not acked yet */
#define IRQ_AUTODETECT 16 /* IRQ is being autodetected */
#define IRQ_WAITING 32 /* IRQ not yet seen - for autodetection */
#define IRQ_LEVEL 64 /* IRQ level triggered */
#define IRQ_MASKED 128 /* IRQ masked - shouldn't be seen again */
#if defined(ARCH_HAS_IRQ_PER_CPU)
# define IRQ_PER_CPU 256 /* IRQ is per CPU */
# define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
#else
# define CHECK_IRQ_PER_CPU(var) 0
#endif
/*
* Interrupt controller descriptor. This is all we need
* to describe about the low-level hardware.
*/
struct hw_interrupt_type {
const char * typename;
unsigned int (*startup)(unsigned int irq);
void (*shutdown)(unsigned int irq);
void (*enable)(unsigned int irq);
void (*disable)(unsigned int irq);
void (*ack)(unsigned int irq);
void (*end)(unsigned int irq);
void (*set_affinity)(unsigned int irq, cpumask_t dest);
/* Currently used only by UML, might disappear one day.*/
#ifdef CONFIG_IRQ_RELEASE_METHOD
void (*release)(unsigned int irq, void *dev_id);
#endif
};
typedef struct hw_interrupt_type hw_irq_controller;
/*
* This is the "IRQ descriptor", which contains various information
* about the irq, including what kind of hardware handling it has,
* whether it is disabled etc etc.
*
* Pad this out to 32 bytes for cache and indexing reasons.
*/
typedef struct irq_desc {
hw_irq_controller *handler;
void *handler_data;
struct irqaction *action; /* IRQ action list */
unsigned int status; /* IRQ status */
unsigned int depth; /* nested irq disables */
unsigned int irq_count; /* For detecting broken interrupts */
unsigned int irqs_unhandled;
spinlock_t lock;
#if defined (CONFIG_GENERIC_PENDING_IRQ) || defined (CONFIG_IRQBALANCE)
unsigned int move_irq; /* Flag need to re-target intr dest*/
#endif
} ____cacheline_aligned irq_desc_t;
extern irq_desc_t irq_desc [NR_IRQS];
/* Return a pointer to the irq descriptor for IRQ. */
static inline irq_desc_t *
irq_descp (int irq)
{
return irq_desc + irq;
}
#include <asm/hw_irq.h> /* the arch dependent stuff */
extern int setup_irq(unsigned int irq, struct irqaction * new);
#ifdef CONFIG_GENERIC_HARDIRQS
extern cpumask_t irq_affinity[NR_IRQS];
#ifdef CONFIG_SMP
static inline void set_native_irq_info(int irq, cpumask_t mask)
{
irq_affinity[irq] = mask;
}
#else
static inline void set_native_irq_info(int irq, cpumask_t mask)
{
}
#endif
#ifdef CONFIG_SMP
#if defined (CONFIG_GENERIC_PENDING_IRQ) || defined (CONFIG_IRQBALANCE)
extern cpumask_t pending_irq_cpumask[NR_IRQS];
void set_pending_irq(unsigned int irq, cpumask_t mask);
void move_native_irq(int irq);
#ifdef CONFIG_PCI_MSI
/*
* Wonder why these are dummies?
* For e.g the set_ioapic_affinity_vector() calls the set_ioapic_affinity_irq()
* counter part after translating the vector to irq info. We need to perform
* this operation on the real irq, when we dont use vector, i.e when
* pci_use_vector() is false.
*/
static inline void move_irq(int irq)
{
}
static inline void set_irq_info(int irq, cpumask_t mask)
{
}
#else // CONFIG_PCI_MSI
static inline void move_irq(int irq)
{
move_native_irq(irq);
}
static inline void set_irq_info(int irq, cpumask_t mask)
{
set_native_irq_info(irq, mask);
}
#endif // CONFIG_PCI_MSI
#else // CONFIG_GENERIC_PENDING_IRQ || CONFIG_IRQBALANCE
#define move_irq(x)
#define move_native_irq(x)
#define set_pending_irq(x,y)
static inline void set_irq_info(int irq, cpumask_t mask)
{
set_native_irq_info(irq, mask);
}
#endif // CONFIG_GENERIC_PENDING_IRQ
#else // CONFIG_SMP
#define move_irq(x)
#define move_native_irq(x)
#endif // CONFIG_SMP
extern int no_irq_affinity;
extern int noirqdebug_setup(char *str);
extern fastcall int handle_IRQ_event(unsigned int irq, struct pt_regs *regs,
struct irqaction *action);
extern fastcall unsigned int __do_IRQ(unsigned int irq, struct pt_regs *regs);
extern void note_interrupt(unsigned int irq, irq_desc_t *desc,
int action_ret, struct pt_regs *regs);
extern int can_request_irq(unsigned int irq, unsigned long irqflags);
extern void init_irq_proc(void);
#ifdef CONFIG_AUTO_IRQ_AFFINITY
extern int select_smp_affinity(unsigned int irq);
#else
static inline int
select_smp_affinity(unsigned int irq)
{
return 1;
}
#endif
#endif
extern hw_irq_controller no_irq_type; /* needed in every arch ? */
#endif
#endif /* __irq_h */