linux_dsm_epyc7002/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
Rob Herring d8bcaabee4 arm64: dts: fix unit-address leading 0s
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using
the following command:

perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm64/boot/dts -type -f -name '*.dts*'

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-20 00:37:56 +02:00

279 lines
6.7 KiB
Plaintext

/*
* BSD LICENSE
*
* Copyright(c) 2016-2017 Broadcom. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
sata {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x67d00000 0x00800000>;
sata0: ahci@210000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00210000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata0_port0: sata-port@0 {
reg = <0>;
phys = <&sata0_phy0>;
phy-names = "sata-phy";
};
};
sata_phy0: sata_phy@212100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00212100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata0_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata1: ahci@310000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00310000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata1_port0: sata-port@0 {
reg = <0>;
phys = <&sata1_phy0>;
phy-names = "sata-phy";
};
};
sata_phy1: sata_phy@312100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00312100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata1_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata2: ahci@120000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00120000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata2_port0: sata-port@0 {
reg = <0>;
phys = <&sata2_phy0>;
phy-names = "sata-phy";
};
};
sata_phy2: sata_phy@122100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00122100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata2_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata3: ahci@130000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00130000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata3_port0: sata-port@0 {
reg = <0>;
phys = <&sata3_phy0>;
phy-names = "sata-phy";
};
};
sata_phy3: sata_phy@132100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00132100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata3_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata4: ahci@330000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00330000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata4_port0: sata-port@0 {
reg = <0>;
phys = <&sata4_phy0>;
phy-names = "sata-phy";
};
};
sata_phy4: sata_phy@332100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00332100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata4_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata5: ahci@400000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00400000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata5_port0: sata-port@0 {
reg = <0>;
phys = <&sata5_phy0>;
phy-names = "sata-phy";
};
};
sata_phy5: sata_phy@402100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00402100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata5_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata6: ahci@410000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00410000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata6_port0: sata-port@0 {
reg = <0>;
phys = <&sata6_phy0>;
phy-names = "sata-phy";
};
};
sata_phy6: sata_phy@412100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00412100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata6_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata7: ahci@420000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00420000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata7_port0: sata-port@0 {
reg = <0>;
phys = <&sata7_phy0>;
phy-names = "sata-phy";
};
};
sata_phy7: sata_phy@422100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00422100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata7_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
};