mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 12:46:39 +07:00
be2019816e
Add support for the Motorola/Emerson MVME5100 Single Board Computer. The MVME5100 is a 6U form factor VME64 computer with: - A single MPC7410 or MPC750 CPU - A HAWK Processor Host Bridge (CPU to PCI) and MultiProcessor Interrupt Controller (MPIC) - Up to 500Mb of onboard memory - A M48T37 Real Time Clock (RTC) and Non-Volatile Memory chip - Two 16550 compatible UARTS - Two Intel E100 Fast Ethernets - Two PCI Mezzanine Card (PMC) Slots - PPCBug Firmware The HAWK PHB/MPIC is compatible with the MPC10x devices. There is no onboard disk support. This is usually provided by installing a PMC in first PMC slot. This patch revives the board support, it was present in early 2.6 series kernels. The board support in those days was by Matt Porter of MontaVista Software. CSC Australia has around 31 of these boards in service. The kernel in use for the boards is based on 2.6.31. The boards are operated without disks from a file server. This patch is based on linux-3.13-rc2 and has been boot tested. Only boards with 512 Mb of memory are known to work. Signed-off-by: Stephen Chivers <schivers@csc.com> Tested-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Scott Wood <scottwood@freescale.com>
456 lines
11 KiB
Bash
Executable File
456 lines
11 KiB
Bash
Executable File
#!/bin/sh
|
|
|
|
# Copyright (C) 2006 Paul Mackerras, IBM Corporation <paulus@samba.org>
|
|
# This program may be used under the terms of version 2 of the GNU
|
|
# General Public License.
|
|
|
|
# This script takes a kernel binary and optionally an initrd image
|
|
# and/or a device-tree blob, and creates a bootable zImage for a
|
|
# given platform.
|
|
|
|
# Options:
|
|
# -o zImage specify output file
|
|
# -p platform specify platform (links in $platform.o)
|
|
# -i initrd specify initrd file
|
|
# -d devtree specify device-tree blob
|
|
# -s tree.dts specify device-tree source file (needs dtc installed)
|
|
# -c cache $kernel.strip.gz (use if present & newer, else make)
|
|
# -C prefix specify command prefix for cross-building tools
|
|
# (strip, objcopy, ld)
|
|
# -D dir specify directory containing data files used by script
|
|
# (default ./arch/powerpc/boot)
|
|
# -W dir specify working directory for temporary files (default .)
|
|
|
|
# Stop execution if any command fails
|
|
set -e
|
|
|
|
# Allow for verbose output
|
|
if [ "$V" = 1 ]; then
|
|
set -x
|
|
fi
|
|
|
|
# defaults
|
|
kernel=
|
|
ofile=zImage
|
|
platform=of
|
|
initrd=
|
|
dtb=
|
|
dts=
|
|
cacheit=
|
|
binary=
|
|
gzip=.gz
|
|
pie=
|
|
|
|
# cross-compilation prefix
|
|
CROSS=
|
|
|
|
# mkimage wrapper script
|
|
MKIMAGE=$srctree/scripts/mkuboot.sh
|
|
|
|
# directory for object and other files used by this script
|
|
object=arch/powerpc/boot
|
|
objbin=$object
|
|
dtc=scripts/dtc/dtc
|
|
|
|
# directory for working files
|
|
tmpdir=.
|
|
|
|
usage() {
|
|
echo 'Usage: wrapper [-o output] [-p platform] [-i initrd]' >&2
|
|
echo ' [-d devtree] [-s tree.dts] [-c] [-C cross-prefix]' >&2
|
|
echo ' [-D datadir] [-W workingdir] [--no-gzip] [vmlinux]' >&2
|
|
exit 1
|
|
}
|
|
|
|
while [ "$#" -gt 0 ]; do
|
|
case "$1" in
|
|
-o)
|
|
shift
|
|
[ "$#" -gt 0 ] || usage
|
|
ofile="$1"
|
|
;;
|
|
-p)
|
|
shift
|
|
[ "$#" -gt 0 ] || usage
|
|
platform="$1"
|
|
;;
|
|
-i)
|
|
shift
|
|
[ "$#" -gt 0 ] || usage
|
|
initrd="$1"
|
|
;;
|
|
-d)
|
|
shift
|
|
[ "$#" -gt 0 ] || usage
|
|
dtb="$1"
|
|
;;
|
|
-s)
|
|
shift
|
|
[ "$#" -gt 0 ] || usage
|
|
dts="$1"
|
|
;;
|
|
-c)
|
|
cacheit=y
|
|
;;
|
|
-C)
|
|
shift
|
|
[ "$#" -gt 0 ] || usage
|
|
CROSS="$1"
|
|
;;
|
|
-D)
|
|
shift
|
|
[ "$#" -gt 0 ] || usage
|
|
object="$1"
|
|
objbin="$1"
|
|
;;
|
|
-W)
|
|
shift
|
|
[ "$#" -gt 0 ] || usage
|
|
tmpdir="$1"
|
|
;;
|
|
--no-gzip)
|
|
gzip=
|
|
;;
|
|
-?)
|
|
usage
|
|
;;
|
|
*)
|
|
[ -z "$kernel" ] || usage
|
|
kernel="$1"
|
|
;;
|
|
esac
|
|
shift
|
|
done
|
|
|
|
if [ -n "$dts" ]; then
|
|
if [ ! -r "$dts" -a -r "$object/dts/$dts" ]; then
|
|
dts="$object/dts/$dts"
|
|
fi
|
|
if [ -z "$dtb" ]; then
|
|
dtb="$platform.dtb"
|
|
fi
|
|
$dtc -O dtb -o "$dtb" -b 0 "$dts"
|
|
fi
|
|
|
|
if [ -z "$kernel" ]; then
|
|
kernel=vmlinux
|
|
fi
|
|
|
|
platformo=$object/"$platform".o
|
|
lds=$object/zImage.lds
|
|
ext=strip
|
|
objflags=-S
|
|
tmp=$tmpdir/zImage.$$.o
|
|
ksection=.kernel:vmlinux.strip
|
|
isection=.kernel:initrd
|
|
link_address='0x400000'
|
|
make_space=y
|
|
|
|
case "$platform" in
|
|
of)
|
|
platformo="$object/of.o $object/epapr.o"
|
|
make_space=n
|
|
;;
|
|
pseries)
|
|
platformo="$object/of.o $object/epapr.o"
|
|
link_address='0x4000000'
|
|
make_space=n
|
|
;;
|
|
maple)
|
|
platformo="$object/of.o $object/epapr.o"
|
|
link_address='0x400000'
|
|
make_space=n
|
|
;;
|
|
pmac|chrp)
|
|
platformo="$object/of.o $object/epapr.o"
|
|
make_space=n
|
|
;;
|
|
coff)
|
|
platformo="$object/crt0.o $object/of.o $object/epapr.o"
|
|
lds=$object/zImage.coff.lds
|
|
link_address='0x500000'
|
|
make_space=n
|
|
pie=
|
|
;;
|
|
miboot|uboot*)
|
|
# miboot and U-boot want just the bare bits, not an ELF binary
|
|
ext=bin
|
|
objflags="-O binary"
|
|
tmp="$ofile"
|
|
ksection=image
|
|
isection=initrd
|
|
;;
|
|
cuboot*)
|
|
binary=y
|
|
gzip=
|
|
case "$platform" in
|
|
*-mpc866ads|*-mpc885ads|*-adder875*|*-ep88xc)
|
|
platformo=$object/cuboot-8xx.o
|
|
;;
|
|
*5200*|*-motionpro)
|
|
platformo=$object/cuboot-52xx.o
|
|
;;
|
|
*-pq2fads|*-ep8248e|*-mpc8272*|*-storcenter)
|
|
platformo=$object/cuboot-pq2.o
|
|
;;
|
|
*-mpc824*)
|
|
platformo=$object/cuboot-824x.o
|
|
;;
|
|
*-mpc83*|*-asp834x*)
|
|
platformo=$object/cuboot-83xx.o
|
|
;;
|
|
*-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
|
|
platformo=$object/cuboot-85xx-cpm2.o
|
|
;;
|
|
*-mpc85*|*-tqm85*|*-sbc85*)
|
|
platformo=$object/cuboot-85xx.o
|
|
;;
|
|
*-amigaone)
|
|
link_address='0x800000'
|
|
;;
|
|
esac
|
|
;;
|
|
ps3)
|
|
platformo="$object/ps3-head.o $object/ps3-hvcall.o $object/ps3.o"
|
|
lds=$object/zImage.ps3.lds
|
|
gzip=
|
|
ext=bin
|
|
objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data"
|
|
ksection=.kernel:vmlinux.bin
|
|
isection=.kernel:initrd
|
|
link_address=''
|
|
make_space=n
|
|
pie=
|
|
;;
|
|
ep88xc|ep405|ep8248e)
|
|
platformo="$object/fixed-head.o $object/$platform.o"
|
|
binary=y
|
|
;;
|
|
adder875-redboot)
|
|
platformo="$object/fixed-head.o $object/redboot-8xx.o"
|
|
binary=y
|
|
;;
|
|
simpleboot-virtex405-*)
|
|
platformo="$object/virtex405-head.o $object/simpleboot.o $object/virtex.o"
|
|
binary=y
|
|
;;
|
|
simpleboot-virtex440-*)
|
|
platformo="$object/fixed-head.o $object/simpleboot.o $object/virtex.o"
|
|
binary=y
|
|
;;
|
|
simpleboot-*)
|
|
platformo="$object/fixed-head.o $object/simpleboot.o"
|
|
binary=y
|
|
;;
|
|
asp834x-redboot)
|
|
platformo="$object/fixed-head.o $object/redboot-83xx.o"
|
|
binary=y
|
|
;;
|
|
xpedite52*)
|
|
link_address='0x1400000'
|
|
platformo=$object/cuboot-85xx.o
|
|
;;
|
|
gamecube|wii)
|
|
link_address='0x600000'
|
|
platformo="$object/$platform-head.o $object/$platform.o"
|
|
;;
|
|
treeboot-currituck)
|
|
link_address='0x1000000'
|
|
;;
|
|
treeboot-iss4xx-mpic)
|
|
platformo="$object/treeboot-iss4xx.o"
|
|
;;
|
|
epapr)
|
|
platformo="$object/epapr.o $object/epapr-wrapper.o"
|
|
link_address='0x20000000'
|
|
pie=-pie
|
|
;;
|
|
mvme5100)
|
|
platformo="$object/fixed-head.o $object/mvme5100.o"
|
|
binary=y
|
|
;;
|
|
esac
|
|
|
|
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
|
|
if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then
|
|
${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
|
|
|
|
strip_size=$(stat -c %s $vmz.$$)
|
|
|
|
if [ -n "$gzip" ]; then
|
|
gzip -n -f -9 "$vmz.$$"
|
|
fi
|
|
|
|
if [ -n "$cacheit" ]; then
|
|
mv -f "$vmz.$$$gzip" "$vmz$gzip"
|
|
else
|
|
vmz="$vmz.$$"
|
|
fi
|
|
else
|
|
# Calculate the vmlinux.strip size
|
|
${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
|
|
strip_size=$(stat -c %s $vmz.$$)
|
|
rm -f $vmz.$$
|
|
fi
|
|
|
|
if [ "$make_space" = "y" ]; then
|
|
# Round the size to next higher MB limit
|
|
round_size=$(((strip_size + 0xfffff) & 0xfff00000))
|
|
|
|
round_size=0x$(printf "%x" $round_size)
|
|
link_addr=$(printf "%d" $link_address)
|
|
|
|
if [ $link_addr -lt $strip_size ]; then
|
|
echo "INFO: Uncompressed kernel (size 0x$(printf "%x\n" $strip_size))" \
|
|
"overlaps the address of the wrapper($link_address)"
|
|
echo "INFO: Fixing the link_address of wrapper to ($round_size)"
|
|
link_address=$round_size
|
|
fi
|
|
fi
|
|
|
|
vmz="$vmz$gzip"
|
|
|
|
# Extract kernel version information, some platforms want to include
|
|
# it in the image header
|
|
version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \
|
|
cut -d' ' -f3`
|
|
if [ -n "$version" ]; then
|
|
uboot_version="-n Linux-$version"
|
|
fi
|
|
|
|
# physical offset of kernel image
|
|
membase=`${CROSS}objdump -p "$kernel" | grep -m 1 LOAD | awk '{print $7}'`
|
|
|
|
case "$platform" in
|
|
uboot)
|
|
rm -f "$ofile"
|
|
${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \
|
|
$uboot_version -d "$vmz" "$ofile"
|
|
if [ -z "$cacheit" ]; then
|
|
rm -f "$vmz"
|
|
fi
|
|
exit 0
|
|
;;
|
|
uboot-obs600)
|
|
rm -f "$ofile"
|
|
# obs600 wants a multi image with an initrd, so we need to put a fake
|
|
# one in even when building a "normal" image.
|
|
if [ -n "$initrd" ]; then
|
|
real_rd="$initrd"
|
|
else
|
|
real_rd=`mktemp`
|
|
echo "\0" >>"$real_rd"
|
|
fi
|
|
${MKIMAGE} -A ppc -O linux -T multi -C gzip -a $membase -e $membase \
|
|
$uboot_version -d "$vmz":"$real_rd":"$dtb" "$ofile"
|
|
if [ -z "$initrd" ]; then
|
|
rm -f "$real_rd"
|
|
fi
|
|
if [ -z "$cacheit" ]; then
|
|
rm -f "$vmz"
|
|
fi
|
|
exit 0
|
|
;;
|
|
esac
|
|
|
|
addsec() {
|
|
${CROSS}objcopy $4 $1 \
|
|
--add-section=$3="$2" \
|
|
--set-section-flags=$3=contents,alloc,load,readonly,data
|
|
}
|
|
|
|
addsec $tmp "$vmz" $ksection $object/empty.o
|
|
if [ -z "$cacheit" ]; then
|
|
rm -f "$vmz"
|
|
fi
|
|
|
|
if [ -n "$initrd" ]; then
|
|
addsec $tmp "$initrd" $isection
|
|
fi
|
|
|
|
if [ -n "$dtb" ]; then
|
|
addsec $tmp "$dtb" .kernel:dtb
|
|
if [ -n "$dts" ]; then
|
|
rm $dtb
|
|
fi
|
|
fi
|
|
|
|
if [ "$platform" != "miboot" ]; then
|
|
if [ -n "$link_address" ] ; then
|
|
text_start="-Ttext $link_address"
|
|
fi
|
|
${CROSS}ld -m elf32ppc -T $lds $text_start $pie -o "$ofile" \
|
|
$platformo $tmp $object/wrapper.a
|
|
rm $tmp
|
|
fi
|
|
|
|
# Some platforms need the zImage's entry point and base address
|
|
base=0x`${CROSS}nm "$ofile" | grep ' _start$' | cut -d' ' -f1`
|
|
entry=`${CROSS}objdump -f "$ofile" | grep '^start address ' | cut -d' ' -f3`
|
|
|
|
if [ -n "$binary" ]; then
|
|
mv "$ofile" "$ofile".elf
|
|
${CROSS}objcopy -O binary "$ofile".elf "$ofile"
|
|
fi
|
|
|
|
# post-processing needed for some platforms
|
|
case "$platform" in
|
|
pseries|chrp|maple)
|
|
$objbin/addnote "$ofile"
|
|
;;
|
|
coff)
|
|
${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
|
|
$objbin/hack-coff "$ofile"
|
|
;;
|
|
cuboot*)
|
|
gzip -n -f -9 "$ofile"
|
|
${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
|
|
$uboot_version -d "$ofile".gz "$ofile"
|
|
;;
|
|
treeboot*)
|
|
mv "$ofile" "$ofile.elf"
|
|
$objbin/mktree "$ofile.elf" "$ofile" "$base" "$entry"
|
|
if [ -z "$cacheit" ]; then
|
|
rm -f "$ofile.elf"
|
|
fi
|
|
exit 0
|
|
;;
|
|
ps3)
|
|
# The ps3's loader supports loading a gzipped binary image from flash
|
|
# rom to ram addr zero. The loader then enters the system reset
|
|
# vector at addr 0x100. A bootwrapper overlay is used to arrange for
|
|
# a binary image of the kernel to be at addr zero, and yet have a
|
|
# suitable bootwrapper entry at 0x100. To construct the final rom
|
|
# image 512 bytes from offset 0x100 is copied to the bootwrapper
|
|
# place holder at symbol __system_reset_kernel. The 512 bytes of the
|
|
# bootwrapper entry code at symbol __system_reset_overlay is then
|
|
# copied to offset 0x100. At runtime the bootwrapper program copies
|
|
# the data at __system_reset_kernel back to addr 0x100.
|
|
|
|
system_reset_overlay=0x`${CROSS}nm "$ofile" \
|
|
| grep ' __system_reset_overlay$' \
|
|
| cut -d' ' -f1`
|
|
system_reset_overlay=`printf "%d" $system_reset_overlay`
|
|
system_reset_kernel=0x`${CROSS}nm "$ofile" \
|
|
| grep ' __system_reset_kernel$' \
|
|
| cut -d' ' -f1`
|
|
system_reset_kernel=`printf "%d" $system_reset_kernel`
|
|
overlay_dest="256"
|
|
overlay_size="512"
|
|
|
|
${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
|
|
|
|
dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
|
|
skip=$overlay_dest seek=$system_reset_kernel \
|
|
count=$overlay_size bs=1
|
|
|
|
dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
|
|
skip=$system_reset_overlay seek=$overlay_dest \
|
|
count=$overlay_size bs=1
|
|
|
|
odir="$(dirname "$ofile.bin")"
|
|
rm -f "$odir/otheros.bld"
|
|
gzip -n --force -9 --stdout "$ofile.bin" > "$odir/otheros.bld"
|
|
;;
|
|
esac
|