mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 06:56:46 +07:00
1dd06ae8db
The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2059 lines
53 KiB
C
2059 lines
53 KiB
C
/*
|
|
* drivers/net/wan/dscc4/dscc4.c: a DSCC4 HDLC driver for Linux
|
|
*
|
|
* This software may be used and distributed according to the terms of the
|
|
* GNU General Public License.
|
|
*
|
|
* The author may be reached as romieu@cogenit.fr.
|
|
* Specific bug reports/asian food will be welcome.
|
|
*
|
|
* Special thanks to the nice people at CS-Telecom for the hardware and the
|
|
* access to the test/measure tools.
|
|
*
|
|
*
|
|
* Theory of Operation
|
|
*
|
|
* I. Board Compatibility
|
|
*
|
|
* This device driver is designed for the Siemens PEB20534 4 ports serial
|
|
* controller as found on Etinc PCISYNC cards. The documentation for the
|
|
* chipset is available at http://www.infineon.com:
|
|
* - Data Sheet "DSCC4, DMA Supported Serial Communication Controller with
|
|
* 4 Channels, PEB 20534 Version 2.1, PEF 20534 Version 2.1";
|
|
* - Application Hint "Management of DSCC4 on-chip FIFO resources".
|
|
* - Errata sheet DS5 (courtesy of Michael Skerritt).
|
|
* Jens David has built an adapter based on the same chipset. Take a look
|
|
* at http://www.afthd.tu-darmstadt.de/~dg1kjd/pciscc4 for a specific
|
|
* driver.
|
|
* Sample code (2 revisions) is available at Infineon.
|
|
*
|
|
* II. Board-specific settings
|
|
*
|
|
* Pcisync can transmit some clock signal to the outside world on the
|
|
* *first two* ports provided you put a quartz and a line driver on it and
|
|
* remove the jumpers. The operation is described on Etinc web site. If you
|
|
* go DCE on these ports, don't forget to use an adequate cable.
|
|
*
|
|
* Sharing of the PCI interrupt line for this board is possible.
|
|
*
|
|
* III. Driver operation
|
|
*
|
|
* The rx/tx operations are based on a linked list of descriptors. The driver
|
|
* doesn't use HOLD mode any more. HOLD mode is definitely buggy and the more
|
|
* I tried to fix it, the more it started to look like (convoluted) software
|
|
* mutation of LxDA method. Errata sheet DS5 suggests to use LxDA: consider
|
|
* this a rfc2119 MUST.
|
|
*
|
|
* Tx direction
|
|
* When the tx ring is full, the xmit routine issues a call to netdev_stop.
|
|
* The device is supposed to be enabled again during an ALLS irq (we could
|
|
* use HI but as it's easy to lose events, it's fscked).
|
|
*
|
|
* Rx direction
|
|
* The received frames aren't supposed to span over multiple receiving areas.
|
|
* I may implement it some day but it isn't the highest ranked item.
|
|
*
|
|
* IV. Notes
|
|
* The current error (XDU, RFO) recovery code is untested.
|
|
* So far, RDO takes his RX channel down and the right sequence to enable it
|
|
* again is still a mystery. If RDO happens, plan a reboot. More details
|
|
* in the code (NB: as this happens, TX still works).
|
|
* Don't mess the cables during operation, especially on DTE ports. I don't
|
|
* suggest it for DCE either but at least one can get some messages instead
|
|
* of a complete instant freeze.
|
|
* Tests are done on Rev. 20 of the silicium. The RDO handling changes with
|
|
* the documentation/chipset releases.
|
|
*
|
|
* TODO:
|
|
* - test X25.
|
|
* - use polling at high irq/s,
|
|
* - performance analysis,
|
|
* - endianness.
|
|
*
|
|
* 2001/12/10 Daniela Squassoni <daniela@cyclades.com>
|
|
* - Contribution to support the new generic HDLC layer.
|
|
*
|
|
* 2002/01 Ueimor
|
|
* - old style interface removal
|
|
* - dscc4_release_ring fix (related to DMA mapping)
|
|
* - hard_start_xmit fix (hint: TxSizeMax)
|
|
* - misc crapectomy.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/list.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <asm/cache.h>
|
|
#include <asm/byteorder.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/string.h>
|
|
|
|
#include <linux/if_arp.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/hdlc.h>
|
|
#include <linux/mutex.h>
|
|
|
|
/* Version */
|
|
static const char version[] = "$Id: dscc4.c,v 1.173 2003/09/20 23:55:34 romieu Exp $ for Linux\n";
|
|
static int debug;
|
|
static int quartz;
|
|
|
|
#ifdef CONFIG_DSCC4_PCI_RST
|
|
static DEFINE_MUTEX(dscc4_mutex);
|
|
static u32 dscc4_pci_config_store[16];
|
|
#endif
|
|
|
|
#define DRV_NAME "dscc4"
|
|
|
|
#undef DSCC4_POLLING
|
|
|
|
/* Module parameters */
|
|
|
|
MODULE_AUTHOR("Maintainer: Francois Romieu <romieu@cogenit.fr>");
|
|
MODULE_DESCRIPTION("Siemens PEB20534 PCI Controller");
|
|
MODULE_LICENSE("GPL");
|
|
module_param(debug, int, 0);
|
|
MODULE_PARM_DESC(debug,"Enable/disable extra messages");
|
|
module_param(quartz, int, 0);
|
|
MODULE_PARM_DESC(quartz,"If present, on-board quartz frequency (Hz)");
|
|
|
|
/* Structures */
|
|
|
|
struct thingie {
|
|
int define;
|
|
u32 bits;
|
|
};
|
|
|
|
struct TxFD {
|
|
__le32 state;
|
|
__le32 next;
|
|
__le32 data;
|
|
__le32 complete;
|
|
u32 jiffies; /* Allows sizeof(TxFD) == sizeof(RxFD) + extra hack */
|
|
/* FWIW, datasheet calls that "dummy" and says that card
|
|
* never looks at it; neither does the driver */
|
|
};
|
|
|
|
struct RxFD {
|
|
__le32 state1;
|
|
__le32 next;
|
|
__le32 data;
|
|
__le32 state2;
|
|
__le32 end;
|
|
};
|
|
|
|
#define DUMMY_SKB_SIZE 64
|
|
#define TX_LOW 8
|
|
#define TX_RING_SIZE 32
|
|
#define RX_RING_SIZE 32
|
|
#define TX_TOTAL_SIZE TX_RING_SIZE*sizeof(struct TxFD)
|
|
#define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct RxFD)
|
|
#define IRQ_RING_SIZE 64 /* Keep it a multiple of 32 */
|
|
#define TX_TIMEOUT (HZ/10)
|
|
#define DSCC4_HZ_MAX 33000000
|
|
#define BRR_DIVIDER_MAX 64*0x00004000 /* Cf errata DS5 p.10 */
|
|
#define dev_per_card 4
|
|
#define SCC_REGISTERS_MAX 23 /* Cf errata DS5 p.4 */
|
|
|
|
#define SOURCE_ID(flags) (((flags) >> 28) & 0x03)
|
|
#define TO_SIZE(state) (((state) >> 16) & 0x1fff)
|
|
|
|
/*
|
|
* Given the operating range of Linux HDLC, the 2 defines below could be
|
|
* made simpler. However they are a fine reminder for the limitations of
|
|
* the driver: it's better to stay < TxSizeMax and < RxSizeMax.
|
|
*/
|
|
#define TO_STATE_TX(len) cpu_to_le32(((len) & TxSizeMax) << 16)
|
|
#define TO_STATE_RX(len) cpu_to_le32((RX_MAX(len) % RxSizeMax) << 16)
|
|
#define RX_MAX(len) ((((len) >> 5) + 1) << 5) /* Cf RLCR */
|
|
#define SCC_REG_START(dpriv) (SCC_START+(dpriv->dev_id)*SCC_OFFSET)
|
|
|
|
struct dscc4_pci_priv {
|
|
__le32 *iqcfg;
|
|
int cfg_cur;
|
|
spinlock_t lock;
|
|
struct pci_dev *pdev;
|
|
|
|
struct dscc4_dev_priv *root;
|
|
dma_addr_t iqcfg_dma;
|
|
u32 xtal_hz;
|
|
};
|
|
|
|
struct dscc4_dev_priv {
|
|
struct sk_buff *rx_skbuff[RX_RING_SIZE];
|
|
struct sk_buff *tx_skbuff[TX_RING_SIZE];
|
|
|
|
struct RxFD *rx_fd;
|
|
struct TxFD *tx_fd;
|
|
__le32 *iqrx;
|
|
__le32 *iqtx;
|
|
|
|
/* FIXME: check all the volatile are required */
|
|
volatile u32 tx_current;
|
|
u32 rx_current;
|
|
u32 iqtx_current;
|
|
u32 iqrx_current;
|
|
|
|
volatile u32 tx_dirty;
|
|
volatile u32 ltda;
|
|
u32 rx_dirty;
|
|
u32 lrda;
|
|
|
|
dma_addr_t tx_fd_dma;
|
|
dma_addr_t rx_fd_dma;
|
|
dma_addr_t iqtx_dma;
|
|
dma_addr_t iqrx_dma;
|
|
|
|
u32 scc_regs[SCC_REGISTERS_MAX]; /* Cf errata DS5 p.4 */
|
|
|
|
struct timer_list timer;
|
|
|
|
struct dscc4_pci_priv *pci_priv;
|
|
spinlock_t lock;
|
|
|
|
int dev_id;
|
|
volatile u32 flags;
|
|
u32 timer_help;
|
|
|
|
unsigned short encoding;
|
|
unsigned short parity;
|
|
struct net_device *dev;
|
|
sync_serial_settings settings;
|
|
void __iomem *base_addr;
|
|
u32 __pad __attribute__ ((aligned (4)));
|
|
};
|
|
|
|
/* GLOBAL registers definitions */
|
|
#define GCMDR 0x00
|
|
#define GSTAR 0x04
|
|
#define GMODE 0x08
|
|
#define IQLENR0 0x0C
|
|
#define IQLENR1 0x10
|
|
#define IQRX0 0x14
|
|
#define IQTX0 0x24
|
|
#define IQCFG 0x3c
|
|
#define FIFOCR1 0x44
|
|
#define FIFOCR2 0x48
|
|
#define FIFOCR3 0x4c
|
|
#define FIFOCR4 0x34
|
|
#define CH0CFG 0x50
|
|
#define CH0BRDA 0x54
|
|
#define CH0BTDA 0x58
|
|
#define CH0FRDA 0x98
|
|
#define CH0FTDA 0xb0
|
|
#define CH0LRDA 0xc8
|
|
#define CH0LTDA 0xe0
|
|
|
|
/* SCC registers definitions */
|
|
#define SCC_START 0x0100
|
|
#define SCC_OFFSET 0x80
|
|
#define CMDR 0x00
|
|
#define STAR 0x04
|
|
#define CCR0 0x08
|
|
#define CCR1 0x0c
|
|
#define CCR2 0x10
|
|
#define BRR 0x2C
|
|
#define RLCR 0x40
|
|
#define IMR 0x54
|
|
#define ISR 0x58
|
|
|
|
#define GPDIR 0x0400
|
|
#define GPDATA 0x0404
|
|
#define GPIM 0x0408
|
|
|
|
/* Bit masks */
|
|
#define EncodingMask 0x00700000
|
|
#define CrcMask 0x00000003
|
|
|
|
#define IntRxScc0 0x10000000
|
|
#define IntTxScc0 0x01000000
|
|
|
|
#define TxPollCmd 0x00000400
|
|
#define RxActivate 0x08000000
|
|
#define MTFi 0x04000000
|
|
#define Rdr 0x00400000
|
|
#define Rdt 0x00200000
|
|
#define Idr 0x00100000
|
|
#define Idt 0x00080000
|
|
#define TxSccRes 0x01000000
|
|
#define RxSccRes 0x00010000
|
|
#define TxSizeMax 0x1fff /* Datasheet DS1 - 11.1.1.1 */
|
|
#define RxSizeMax 0x1ffc /* Datasheet DS1 - 11.1.2.1 */
|
|
|
|
#define Ccr0ClockMask 0x0000003f
|
|
#define Ccr1LoopMask 0x00000200
|
|
#define IsrMask 0x000fffff
|
|
#define BrrExpMask 0x00000f00
|
|
#define BrrMultMask 0x0000003f
|
|
#define EncodingMask 0x00700000
|
|
#define Hold cpu_to_le32(0x40000000)
|
|
#define SccBusy 0x10000000
|
|
#define PowerUp 0x80000000
|
|
#define Vis 0x00001000
|
|
#define FrameOk (FrameVfr | FrameCrc)
|
|
#define FrameVfr 0x80
|
|
#define FrameRdo 0x40
|
|
#define FrameCrc 0x20
|
|
#define FrameRab 0x10
|
|
#define FrameAborted cpu_to_le32(0x00000200)
|
|
#define FrameEnd cpu_to_le32(0x80000000)
|
|
#define DataComplete cpu_to_le32(0x40000000)
|
|
#define LengthCheck 0x00008000
|
|
#define SccEvt 0x02000000
|
|
#define NoAck 0x00000200
|
|
#define Action 0x00000001
|
|
#define HiDesc cpu_to_le32(0x20000000)
|
|
|
|
/* SCC events */
|
|
#define RxEvt 0xf0000000
|
|
#define TxEvt 0x0f000000
|
|
#define Alls 0x00040000
|
|
#define Xdu 0x00010000
|
|
#define Cts 0x00004000
|
|
#define Xmr 0x00002000
|
|
#define Xpr 0x00001000
|
|
#define Rdo 0x00000080
|
|
#define Rfs 0x00000040
|
|
#define Cd 0x00000004
|
|
#define Rfo 0x00000002
|
|
#define Flex 0x00000001
|
|
|
|
/* DMA core events */
|
|
#define Cfg 0x00200000
|
|
#define Hi 0x00040000
|
|
#define Fi 0x00020000
|
|
#define Err 0x00010000
|
|
#define Arf 0x00000002
|
|
#define ArAck 0x00000001
|
|
|
|
/* State flags */
|
|
#define Ready 0x00000000
|
|
#define NeedIDR 0x00000001
|
|
#define NeedIDT 0x00000002
|
|
#define RdoSet 0x00000004
|
|
#define FakeReset 0x00000008
|
|
|
|
/* Don't mask RDO. Ever. */
|
|
#ifdef DSCC4_POLLING
|
|
#define EventsMask 0xfffeef7f
|
|
#else
|
|
#define EventsMask 0xfffa8f7a
|
|
#endif
|
|
|
|
/* Functions prototypes */
|
|
static void dscc4_rx_irq(struct dscc4_pci_priv *, struct dscc4_dev_priv *);
|
|
static void dscc4_tx_irq(struct dscc4_pci_priv *, struct dscc4_dev_priv *);
|
|
static int dscc4_found1(struct pci_dev *, void __iomem *ioaddr);
|
|
static int dscc4_init_one(struct pci_dev *, const struct pci_device_id *ent);
|
|
static int dscc4_open(struct net_device *);
|
|
static netdev_tx_t dscc4_start_xmit(struct sk_buff *,
|
|
struct net_device *);
|
|
static int dscc4_close(struct net_device *);
|
|
static int dscc4_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
static int dscc4_init_ring(struct net_device *);
|
|
static void dscc4_release_ring(struct dscc4_dev_priv *);
|
|
static void dscc4_timer(unsigned long);
|
|
static void dscc4_tx_timeout(struct net_device *);
|
|
static irqreturn_t dscc4_irq(int irq, void *dev_id);
|
|
static int dscc4_hdlc_attach(struct net_device *, unsigned short, unsigned short);
|
|
static int dscc4_set_iface(struct dscc4_dev_priv *, struct net_device *);
|
|
#ifdef DSCC4_POLLING
|
|
static int dscc4_tx_poll(struct dscc4_dev_priv *, struct net_device *);
|
|
#endif
|
|
|
|
static inline struct dscc4_dev_priv *dscc4_priv(struct net_device *dev)
|
|
{
|
|
return dev_to_hdlc(dev)->priv;
|
|
}
|
|
|
|
static inline struct net_device *dscc4_to_dev(struct dscc4_dev_priv *p)
|
|
{
|
|
return p->dev;
|
|
}
|
|
|
|
static void scc_patchl(u32 mask, u32 value, struct dscc4_dev_priv *dpriv,
|
|
struct net_device *dev, int offset)
|
|
{
|
|
u32 state;
|
|
|
|
/* Cf scc_writel for concern regarding thread-safety */
|
|
state = dpriv->scc_regs[offset >> 2];
|
|
state &= ~mask;
|
|
state |= value;
|
|
dpriv->scc_regs[offset >> 2] = state;
|
|
writel(state, dpriv->base_addr + SCC_REG_START(dpriv) + offset);
|
|
}
|
|
|
|
static void scc_writel(u32 bits, struct dscc4_dev_priv *dpriv,
|
|
struct net_device *dev, int offset)
|
|
{
|
|
/*
|
|
* Thread-UNsafe.
|
|
* As of 2002/02/16, there are no thread racing for access.
|
|
*/
|
|
dpriv->scc_regs[offset >> 2] = bits;
|
|
writel(bits, dpriv->base_addr + SCC_REG_START(dpriv) + offset);
|
|
}
|
|
|
|
static inline u32 scc_readl(struct dscc4_dev_priv *dpriv, int offset)
|
|
{
|
|
return dpriv->scc_regs[offset >> 2];
|
|
}
|
|
|
|
static u32 scc_readl_star(struct dscc4_dev_priv *dpriv, struct net_device *dev)
|
|
{
|
|
/* Cf errata DS5 p.4 */
|
|
readl(dpriv->base_addr + SCC_REG_START(dpriv) + STAR);
|
|
return readl(dpriv->base_addr + SCC_REG_START(dpriv) + STAR);
|
|
}
|
|
|
|
static inline void dscc4_do_tx(struct dscc4_dev_priv *dpriv,
|
|
struct net_device *dev)
|
|
{
|
|
dpriv->ltda = dpriv->tx_fd_dma +
|
|
((dpriv->tx_current-1)%TX_RING_SIZE)*sizeof(struct TxFD);
|
|
writel(dpriv->ltda, dpriv->base_addr + CH0LTDA + dpriv->dev_id*4);
|
|
/* Flush posted writes *NOW* */
|
|
readl(dpriv->base_addr + CH0LTDA + dpriv->dev_id*4);
|
|
}
|
|
|
|
static inline void dscc4_rx_update(struct dscc4_dev_priv *dpriv,
|
|
struct net_device *dev)
|
|
{
|
|
dpriv->lrda = dpriv->rx_fd_dma +
|
|
((dpriv->rx_dirty - 1)%RX_RING_SIZE)*sizeof(struct RxFD);
|
|
writel(dpriv->lrda, dpriv->base_addr + CH0LRDA + dpriv->dev_id*4);
|
|
}
|
|
|
|
static inline unsigned int dscc4_tx_done(struct dscc4_dev_priv *dpriv)
|
|
{
|
|
return dpriv->tx_current == dpriv->tx_dirty;
|
|
}
|
|
|
|
static inline unsigned int dscc4_tx_quiescent(struct dscc4_dev_priv *dpriv,
|
|
struct net_device *dev)
|
|
{
|
|
return readl(dpriv->base_addr + CH0FTDA + dpriv->dev_id*4) == dpriv->ltda;
|
|
}
|
|
|
|
static int state_check(u32 state, struct dscc4_dev_priv *dpriv,
|
|
struct net_device *dev, const char *msg)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (debug > 1) {
|
|
if (SOURCE_ID(state) != dpriv->dev_id) {
|
|
printk(KERN_DEBUG "%s (%s): Source Id=%d, state=%08x\n",
|
|
dev->name, msg, SOURCE_ID(state), state );
|
|
ret = -1;
|
|
}
|
|
if (state & 0x0df80c00) {
|
|
printk(KERN_DEBUG "%s (%s): state=%08x (UFO alert)\n",
|
|
dev->name, msg, state);
|
|
ret = -1;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void dscc4_tx_print(struct net_device *dev,
|
|
struct dscc4_dev_priv *dpriv,
|
|
char *msg)
|
|
{
|
|
printk(KERN_DEBUG "%s: tx_current=%02d tx_dirty=%02d (%s)\n",
|
|
dev->name, dpriv->tx_current, dpriv->tx_dirty, msg);
|
|
}
|
|
|
|
static void dscc4_release_ring(struct dscc4_dev_priv *dpriv)
|
|
{
|
|
struct pci_dev *pdev = dpriv->pci_priv->pdev;
|
|
struct TxFD *tx_fd = dpriv->tx_fd;
|
|
struct RxFD *rx_fd = dpriv->rx_fd;
|
|
struct sk_buff **skbuff;
|
|
int i;
|
|
|
|
pci_free_consistent(pdev, TX_TOTAL_SIZE, tx_fd, dpriv->tx_fd_dma);
|
|
pci_free_consistent(pdev, RX_TOTAL_SIZE, rx_fd, dpriv->rx_fd_dma);
|
|
|
|
skbuff = dpriv->tx_skbuff;
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
if (*skbuff) {
|
|
pci_unmap_single(pdev, le32_to_cpu(tx_fd->data),
|
|
(*skbuff)->len, PCI_DMA_TODEVICE);
|
|
dev_kfree_skb(*skbuff);
|
|
}
|
|
skbuff++;
|
|
tx_fd++;
|
|
}
|
|
|
|
skbuff = dpriv->rx_skbuff;
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
if (*skbuff) {
|
|
pci_unmap_single(pdev, le32_to_cpu(rx_fd->data),
|
|
RX_MAX(HDLC_MAX_MRU), PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb(*skbuff);
|
|
}
|
|
skbuff++;
|
|
rx_fd++;
|
|
}
|
|
}
|
|
|
|
static inline int try_get_rx_skb(struct dscc4_dev_priv *dpriv,
|
|
struct net_device *dev)
|
|
{
|
|
unsigned int dirty = dpriv->rx_dirty%RX_RING_SIZE;
|
|
struct RxFD *rx_fd = dpriv->rx_fd + dirty;
|
|
const int len = RX_MAX(HDLC_MAX_MRU);
|
|
struct sk_buff *skb;
|
|
int ret = 0;
|
|
|
|
skb = dev_alloc_skb(len);
|
|
dpriv->rx_skbuff[dirty] = skb;
|
|
if (skb) {
|
|
skb->protocol = hdlc_type_trans(skb, dev);
|
|
rx_fd->data = cpu_to_le32(pci_map_single(dpriv->pci_priv->pdev,
|
|
skb->data, len, PCI_DMA_FROMDEVICE));
|
|
} else {
|
|
rx_fd->data = 0;
|
|
ret = -1;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* IRQ/thread/whatever safe
|
|
*/
|
|
static int dscc4_wait_ack_cec(struct dscc4_dev_priv *dpriv,
|
|
struct net_device *dev, char *msg)
|
|
{
|
|
s8 i = 0;
|
|
|
|
do {
|
|
if (!(scc_readl_star(dpriv, dev) & SccBusy)) {
|
|
printk(KERN_DEBUG "%s: %s ack (%d try)\n", dev->name,
|
|
msg, i);
|
|
goto done;
|
|
}
|
|
schedule_timeout_uninterruptible(10);
|
|
rmb();
|
|
} while (++i > 0);
|
|
netdev_err(dev, "%s timeout\n", msg);
|
|
done:
|
|
return (i >= 0) ? i : -EAGAIN;
|
|
}
|
|
|
|
static int dscc4_do_action(struct net_device *dev, char *msg)
|
|
{
|
|
void __iomem *ioaddr = dscc4_priv(dev)->base_addr;
|
|
s16 i = 0;
|
|
|
|
writel(Action, ioaddr + GCMDR);
|
|
ioaddr += GSTAR;
|
|
do {
|
|
u32 state = readl(ioaddr);
|
|
|
|
if (state & ArAck) {
|
|
netdev_dbg(dev, "%s ack\n", msg);
|
|
writel(ArAck, ioaddr);
|
|
goto done;
|
|
} else if (state & Arf) {
|
|
netdev_err(dev, "%s failed\n", msg);
|
|
writel(Arf, ioaddr);
|
|
i = -1;
|
|
goto done;
|
|
}
|
|
rmb();
|
|
} while (++i > 0);
|
|
netdev_err(dev, "%s timeout\n", msg);
|
|
done:
|
|
return i;
|
|
}
|
|
|
|
static inline int dscc4_xpr_ack(struct dscc4_dev_priv *dpriv)
|
|
{
|
|
int cur = dpriv->iqtx_current%IRQ_RING_SIZE;
|
|
s8 i = 0;
|
|
|
|
do {
|
|
if (!(dpriv->flags & (NeedIDR | NeedIDT)) ||
|
|
(dpriv->iqtx[cur] & cpu_to_le32(Xpr)))
|
|
break;
|
|
smp_rmb();
|
|
schedule_timeout_uninterruptible(10);
|
|
} while (++i > 0);
|
|
|
|
return (i >= 0 ) ? i : -EAGAIN;
|
|
}
|
|
|
|
#if 0 /* dscc4_{rx/tx}_reset are both unreliable - more tweak needed */
|
|
static void dscc4_rx_reset(struct dscc4_dev_priv *dpriv, struct net_device *dev)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dpriv->pci_priv->lock, flags);
|
|
/* Cf errata DS5 p.6 */
|
|
writel(0x00000000, dpriv->base_addr + CH0LRDA + dpriv->dev_id*4);
|
|
scc_patchl(PowerUp, 0, dpriv, dev, CCR0);
|
|
readl(dpriv->base_addr + CH0LRDA + dpriv->dev_id*4);
|
|
writel(MTFi|Rdr, dpriv->base_addr + dpriv->dev_id*0x0c + CH0CFG);
|
|
writel(Action, dpriv->base_addr + GCMDR);
|
|
spin_unlock_irqrestore(&dpriv->pci_priv->lock, flags);
|
|
}
|
|
|
|
#endif
|
|
|
|
#if 0
|
|
static void dscc4_tx_reset(struct dscc4_dev_priv *dpriv, struct net_device *dev)
|
|
{
|
|
u16 i = 0;
|
|
|
|
/* Cf errata DS5 p.7 */
|
|
scc_patchl(PowerUp, 0, dpriv, dev, CCR0);
|
|
scc_writel(0x00050000, dpriv, dev, CCR2);
|
|
/*
|
|
* Must be longer than the time required to fill the fifo.
|
|
*/
|
|
while (!dscc4_tx_quiescent(dpriv, dev) && ++i) {
|
|
udelay(1);
|
|
wmb();
|
|
}
|
|
|
|
writel(MTFi|Rdt, dpriv->base_addr + dpriv->dev_id*0x0c + CH0CFG);
|
|
if (dscc4_do_action(dev, "Rdt") < 0)
|
|
netdev_err(dev, "Tx reset failed\n");
|
|
}
|
|
#endif
|
|
|
|
/* TODO: (ab)use this function to refill a completely depleted RX ring. */
|
|
static inline void dscc4_rx_skb(struct dscc4_dev_priv *dpriv,
|
|
struct net_device *dev)
|
|
{
|
|
struct RxFD *rx_fd = dpriv->rx_fd + dpriv->rx_current%RX_RING_SIZE;
|
|
struct pci_dev *pdev = dpriv->pci_priv->pdev;
|
|
struct sk_buff *skb;
|
|
int pkt_len;
|
|
|
|
skb = dpriv->rx_skbuff[dpriv->rx_current++%RX_RING_SIZE];
|
|
if (!skb) {
|
|
printk(KERN_DEBUG "%s: skb=0 (%s)\n", dev->name, __func__);
|
|
goto refill;
|
|
}
|
|
pkt_len = TO_SIZE(le32_to_cpu(rx_fd->state2));
|
|
pci_unmap_single(pdev, le32_to_cpu(rx_fd->data),
|
|
RX_MAX(HDLC_MAX_MRU), PCI_DMA_FROMDEVICE);
|
|
if ((skb->data[--pkt_len] & FrameOk) == FrameOk) {
|
|
dev->stats.rx_packets++;
|
|
dev->stats.rx_bytes += pkt_len;
|
|
skb_put(skb, pkt_len);
|
|
if (netif_running(dev))
|
|
skb->protocol = hdlc_type_trans(skb, dev);
|
|
netif_rx(skb);
|
|
} else {
|
|
if (skb->data[pkt_len] & FrameRdo)
|
|
dev->stats.rx_fifo_errors++;
|
|
else if (!(skb->data[pkt_len] & FrameCrc))
|
|
dev->stats.rx_crc_errors++;
|
|
else if ((skb->data[pkt_len] & (FrameVfr | FrameRab)) !=
|
|
(FrameVfr | FrameRab))
|
|
dev->stats.rx_length_errors++;
|
|
dev->stats.rx_errors++;
|
|
dev_kfree_skb_irq(skb);
|
|
}
|
|
refill:
|
|
while ((dpriv->rx_dirty - dpriv->rx_current) % RX_RING_SIZE) {
|
|
if (try_get_rx_skb(dpriv, dev) < 0)
|
|
break;
|
|
dpriv->rx_dirty++;
|
|
}
|
|
dscc4_rx_update(dpriv, dev);
|
|
rx_fd->state2 = 0x00000000;
|
|
rx_fd->end = cpu_to_le32(0xbabeface);
|
|
}
|
|
|
|
static void dscc4_free1(struct pci_dev *pdev)
|
|
{
|
|
struct dscc4_pci_priv *ppriv;
|
|
struct dscc4_dev_priv *root;
|
|
int i;
|
|
|
|
ppriv = pci_get_drvdata(pdev);
|
|
root = ppriv->root;
|
|
|
|
for (i = 0; i < dev_per_card; i++)
|
|
unregister_hdlc_device(dscc4_to_dev(root + i));
|
|
|
|
pci_set_drvdata(pdev, NULL);
|
|
|
|
for (i = 0; i < dev_per_card; i++)
|
|
free_netdev(root[i].dev);
|
|
kfree(root);
|
|
kfree(ppriv);
|
|
}
|
|
|
|
static int dscc4_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
struct dscc4_pci_priv *priv;
|
|
struct dscc4_dev_priv *dpriv;
|
|
void __iomem *ioaddr;
|
|
int i, rc;
|
|
|
|
printk(KERN_DEBUG "%s", version);
|
|
|
|
rc = pci_enable_device(pdev);
|
|
if (rc < 0)
|
|
goto out;
|
|
|
|
rc = pci_request_region(pdev, 0, "registers");
|
|
if (rc < 0) {
|
|
pr_err("can't reserve MMIO region (regs)\n");
|
|
goto err_disable_0;
|
|
}
|
|
rc = pci_request_region(pdev, 1, "LBI interface");
|
|
if (rc < 0) {
|
|
pr_err("can't reserve MMIO region (lbi)\n");
|
|
goto err_free_mmio_region_1;
|
|
}
|
|
|
|
ioaddr = pci_ioremap_bar(pdev, 0);
|
|
if (!ioaddr) {
|
|
pr_err("cannot remap MMIO region %llx @ %llx\n",
|
|
(unsigned long long)pci_resource_len(pdev, 0),
|
|
(unsigned long long)pci_resource_start(pdev, 0));
|
|
rc = -EIO;
|
|
goto err_free_mmio_regions_2;
|
|
}
|
|
printk(KERN_DEBUG "Siemens DSCC4, MMIO at %#llx (regs), %#llx (lbi), IRQ %d\n",
|
|
(unsigned long long)pci_resource_start(pdev, 0),
|
|
(unsigned long long)pci_resource_start(pdev, 1), pdev->irq);
|
|
|
|
/* Cf errata DS5 p.2 */
|
|
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xf8);
|
|
pci_set_master(pdev);
|
|
|
|
rc = dscc4_found1(pdev, ioaddr);
|
|
if (rc < 0)
|
|
goto err_iounmap_3;
|
|
|
|
priv = pci_get_drvdata(pdev);
|
|
|
|
rc = request_irq(pdev->irq, dscc4_irq, IRQF_SHARED, DRV_NAME, priv->root);
|
|
if (rc < 0) {
|
|
pr_warn("IRQ %d busy\n", pdev->irq);
|
|
goto err_release_4;
|
|
}
|
|
|
|
/* power up/little endian/dma core controlled via lrda/ltda */
|
|
writel(0x00000001, ioaddr + GMODE);
|
|
/* Shared interrupt queue */
|
|
{
|
|
u32 bits;
|
|
|
|
bits = (IRQ_RING_SIZE >> 5) - 1;
|
|
bits |= bits << 4;
|
|
bits |= bits << 8;
|
|
bits |= bits << 16;
|
|
writel(bits, ioaddr + IQLENR0);
|
|
}
|
|
/* Global interrupt queue */
|
|
writel((u32)(((IRQ_RING_SIZE >> 5) - 1) << 20), ioaddr + IQLENR1);
|
|
|
|
rc = -ENOMEM;
|
|
|
|
priv->iqcfg = (__le32 *) pci_alloc_consistent(pdev,
|
|
IRQ_RING_SIZE*sizeof(__le32), &priv->iqcfg_dma);
|
|
if (!priv->iqcfg)
|
|
goto err_free_irq_5;
|
|
writel(priv->iqcfg_dma, ioaddr + IQCFG);
|
|
|
|
/*
|
|
* SCC 0-3 private rx/tx irq structures
|
|
* IQRX/TXi needs to be set soon. Learned it the hard way...
|
|
*/
|
|
for (i = 0; i < dev_per_card; i++) {
|
|
dpriv = priv->root + i;
|
|
dpriv->iqtx = (__le32 *) pci_alloc_consistent(pdev,
|
|
IRQ_RING_SIZE*sizeof(u32), &dpriv->iqtx_dma);
|
|
if (!dpriv->iqtx)
|
|
goto err_free_iqtx_6;
|
|
writel(dpriv->iqtx_dma, ioaddr + IQTX0 + i*4);
|
|
}
|
|
for (i = 0; i < dev_per_card; i++) {
|
|
dpriv = priv->root + i;
|
|
dpriv->iqrx = (__le32 *) pci_alloc_consistent(pdev,
|
|
IRQ_RING_SIZE*sizeof(u32), &dpriv->iqrx_dma);
|
|
if (!dpriv->iqrx)
|
|
goto err_free_iqrx_7;
|
|
writel(dpriv->iqrx_dma, ioaddr + IQRX0 + i*4);
|
|
}
|
|
|
|
/* Cf application hint. Beware of hard-lock condition on threshold. */
|
|
writel(0x42104000, ioaddr + FIFOCR1);
|
|
//writel(0x9ce69800, ioaddr + FIFOCR2);
|
|
writel(0xdef6d800, ioaddr + FIFOCR2);
|
|
//writel(0x11111111, ioaddr + FIFOCR4);
|
|
writel(0x18181818, ioaddr + FIFOCR4);
|
|
// FIXME: should depend on the chipset revision
|
|
writel(0x0000000e, ioaddr + FIFOCR3);
|
|
|
|
writel(0xff200001, ioaddr + GCMDR);
|
|
|
|
rc = 0;
|
|
out:
|
|
return rc;
|
|
|
|
err_free_iqrx_7:
|
|
while (--i >= 0) {
|
|
dpriv = priv->root + i;
|
|
pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32),
|
|
dpriv->iqrx, dpriv->iqrx_dma);
|
|
}
|
|
i = dev_per_card;
|
|
err_free_iqtx_6:
|
|
while (--i >= 0) {
|
|
dpriv = priv->root + i;
|
|
pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32),
|
|
dpriv->iqtx, dpriv->iqtx_dma);
|
|
}
|
|
pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32), priv->iqcfg,
|
|
priv->iqcfg_dma);
|
|
err_free_irq_5:
|
|
free_irq(pdev->irq, priv->root);
|
|
err_release_4:
|
|
dscc4_free1(pdev);
|
|
err_iounmap_3:
|
|
iounmap (ioaddr);
|
|
err_free_mmio_regions_2:
|
|
pci_release_region(pdev, 1);
|
|
err_free_mmio_region_1:
|
|
pci_release_region(pdev, 0);
|
|
err_disable_0:
|
|
pci_disable_device(pdev);
|
|
goto out;
|
|
};
|
|
|
|
/*
|
|
* Let's hope the default values are decent enough to protect my
|
|
* feet from the user's gun - Ueimor
|
|
*/
|
|
static void dscc4_init_registers(struct dscc4_dev_priv *dpriv,
|
|
struct net_device *dev)
|
|
{
|
|
/* No interrupts, SCC core disabled. Let's relax */
|
|
scc_writel(0x00000000, dpriv, dev, CCR0);
|
|
|
|
scc_writel(LengthCheck | (HDLC_MAX_MRU >> 5), dpriv, dev, RLCR);
|
|
|
|
/*
|
|
* No address recognition/crc-CCITT/cts enabled
|
|
* Shared flags transmission disabled - cf errata DS5 p.11
|
|
* Carrier detect disabled - cf errata p.14
|
|
* FIXME: carrier detection/polarity may be handled more gracefully.
|
|
*/
|
|
scc_writel(0x02408000, dpriv, dev, CCR1);
|
|
|
|
/* crc not forwarded - Cf errata DS5 p.11 */
|
|
scc_writel(0x00050008 & ~RxActivate, dpriv, dev, CCR2);
|
|
// crc forwarded
|
|
//scc_writel(0x00250008 & ~RxActivate, dpriv, dev, CCR2);
|
|
}
|
|
|
|
static inline int dscc4_set_quartz(struct dscc4_dev_priv *dpriv, int hz)
|
|
{
|
|
int ret = 0;
|
|
|
|
if ((hz < 0) || (hz > DSCC4_HZ_MAX))
|
|
ret = -EOPNOTSUPP;
|
|
else
|
|
dpriv->pci_priv->xtal_hz = hz;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct net_device_ops dscc4_ops = {
|
|
.ndo_open = dscc4_open,
|
|
.ndo_stop = dscc4_close,
|
|
.ndo_change_mtu = hdlc_change_mtu,
|
|
.ndo_start_xmit = hdlc_start_xmit,
|
|
.ndo_do_ioctl = dscc4_ioctl,
|
|
.ndo_tx_timeout = dscc4_tx_timeout,
|
|
};
|
|
|
|
static int dscc4_found1(struct pci_dev *pdev, void __iomem *ioaddr)
|
|
{
|
|
struct dscc4_pci_priv *ppriv;
|
|
struct dscc4_dev_priv *root;
|
|
int i, ret = -ENOMEM;
|
|
|
|
root = kcalloc(dev_per_card, sizeof(*root), GFP_KERNEL);
|
|
if (!root)
|
|
goto err_out;
|
|
|
|
for (i = 0; i < dev_per_card; i++) {
|
|
root[i].dev = alloc_hdlcdev(root + i);
|
|
if (!root[i].dev)
|
|
goto err_free_dev;
|
|
}
|
|
|
|
ppriv = kzalloc(sizeof(*ppriv), GFP_KERNEL);
|
|
if (!ppriv)
|
|
goto err_free_dev;
|
|
|
|
ppriv->root = root;
|
|
spin_lock_init(&ppriv->lock);
|
|
|
|
for (i = 0; i < dev_per_card; i++) {
|
|
struct dscc4_dev_priv *dpriv = root + i;
|
|
struct net_device *d = dscc4_to_dev(dpriv);
|
|
hdlc_device *hdlc = dev_to_hdlc(d);
|
|
|
|
d->base_addr = (unsigned long)ioaddr;
|
|
d->irq = pdev->irq;
|
|
d->netdev_ops = &dscc4_ops;
|
|
d->watchdog_timeo = TX_TIMEOUT;
|
|
SET_NETDEV_DEV(d, &pdev->dev);
|
|
|
|
dpriv->dev_id = i;
|
|
dpriv->pci_priv = ppriv;
|
|
dpriv->base_addr = ioaddr;
|
|
spin_lock_init(&dpriv->lock);
|
|
|
|
hdlc->xmit = dscc4_start_xmit;
|
|
hdlc->attach = dscc4_hdlc_attach;
|
|
|
|
dscc4_init_registers(dpriv, d);
|
|
dpriv->parity = PARITY_CRC16_PR0_CCITT;
|
|
dpriv->encoding = ENCODING_NRZ;
|
|
|
|
ret = dscc4_init_ring(d);
|
|
if (ret < 0)
|
|
goto err_unregister;
|
|
|
|
ret = register_hdlc_device(d);
|
|
if (ret < 0) {
|
|
pr_err("unable to register\n");
|
|
dscc4_release_ring(dpriv);
|
|
goto err_unregister;
|
|
}
|
|
}
|
|
|
|
ret = dscc4_set_quartz(root, quartz);
|
|
if (ret < 0)
|
|
goto err_unregister;
|
|
|
|
pci_set_drvdata(pdev, ppriv);
|
|
return ret;
|
|
|
|
err_unregister:
|
|
while (i-- > 0) {
|
|
dscc4_release_ring(root + i);
|
|
unregister_hdlc_device(dscc4_to_dev(root + i));
|
|
}
|
|
kfree(ppriv);
|
|
i = dev_per_card;
|
|
err_free_dev:
|
|
while (i-- > 0)
|
|
free_netdev(root[i].dev);
|
|
kfree(root);
|
|
err_out:
|
|
return ret;
|
|
};
|
|
|
|
/* FIXME: get rid of the unneeded code */
|
|
static void dscc4_timer(unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *)data;
|
|
struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
|
|
// struct dscc4_pci_priv *ppriv;
|
|
|
|
goto done;
|
|
done:
|
|
dpriv->timer.expires = jiffies + TX_TIMEOUT;
|
|
add_timer(&dpriv->timer);
|
|
}
|
|
|
|
static void dscc4_tx_timeout(struct net_device *dev)
|
|
{
|
|
/* FIXME: something is missing there */
|
|
}
|
|
|
|
static int dscc4_loopback_check(struct dscc4_dev_priv *dpriv)
|
|
{
|
|
sync_serial_settings *settings = &dpriv->settings;
|
|
|
|
if (settings->loopback && (settings->clock_type != CLOCK_INT)) {
|
|
struct net_device *dev = dscc4_to_dev(dpriv);
|
|
|
|
netdev_info(dev, "loopback requires clock\n");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DSCC4_PCI_RST
|
|
/*
|
|
* Some DSCC4-based cards wires the GPIO port and the PCI #RST pin together
|
|
* so as to provide a safe way to reset the asic while not the whole machine
|
|
* rebooting.
|
|
*
|
|
* This code doesn't need to be efficient. Keep It Simple
|
|
*/
|
|
static void dscc4_pci_reset(struct pci_dev *pdev, void __iomem *ioaddr)
|
|
{
|
|
int i;
|
|
|
|
mutex_lock(&dscc4_mutex);
|
|
for (i = 0; i < 16; i++)
|
|
pci_read_config_dword(pdev, i << 2, dscc4_pci_config_store + i);
|
|
|
|
/* Maximal LBI clock divider (who cares ?) and whole GPIO range. */
|
|
writel(0x001c0000, ioaddr + GMODE);
|
|
/* Configure GPIO port as output */
|
|
writel(0x0000ffff, ioaddr + GPDIR);
|
|
/* Disable interruption */
|
|
writel(0x0000ffff, ioaddr + GPIM);
|
|
|
|
writel(0x0000ffff, ioaddr + GPDATA);
|
|
writel(0x00000000, ioaddr + GPDATA);
|
|
|
|
/* Flush posted writes */
|
|
readl(ioaddr + GSTAR);
|
|
|
|
schedule_timeout_uninterruptible(10);
|
|
|
|
for (i = 0; i < 16; i++)
|
|
pci_write_config_dword(pdev, i << 2, dscc4_pci_config_store[i]);
|
|
mutex_unlock(&dscc4_mutex);
|
|
}
|
|
#else
|
|
#define dscc4_pci_reset(pdev,ioaddr) do {} while (0)
|
|
#endif /* CONFIG_DSCC4_PCI_RST */
|
|
|
|
static int dscc4_open(struct net_device *dev)
|
|
{
|
|
struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
|
|
struct dscc4_pci_priv *ppriv;
|
|
int ret = -EAGAIN;
|
|
|
|
if ((dscc4_loopback_check(dpriv) < 0))
|
|
goto err;
|
|
|
|
if ((ret = hdlc_open(dev)))
|
|
goto err;
|
|
|
|
ppriv = dpriv->pci_priv;
|
|
|
|
/*
|
|
* Due to various bugs, there is no way to reliably reset a
|
|
* specific port (manufacturer's dependent special PCI #RST wiring
|
|
* apart: it affects all ports). Thus the device goes in the best
|
|
* silent mode possible at dscc4_close() time and simply claims to
|
|
* be up if it's opened again. It still isn't possible to change
|
|
* the HDLC configuration without rebooting but at least the ports
|
|
* can be up/down ifconfig'ed without killing the host.
|
|
*/
|
|
if (dpriv->flags & FakeReset) {
|
|
dpriv->flags &= ~FakeReset;
|
|
scc_patchl(0, PowerUp, dpriv, dev, CCR0);
|
|
scc_patchl(0, 0x00050000, dpriv, dev, CCR2);
|
|
scc_writel(EventsMask, dpriv, dev, IMR);
|
|
netdev_info(dev, "up again\n");
|
|
goto done;
|
|
}
|
|
|
|
/* IDT+IDR during XPR */
|
|
dpriv->flags = NeedIDR | NeedIDT;
|
|
|
|
scc_patchl(0, PowerUp | Vis, dpriv, dev, CCR0);
|
|
|
|
/*
|
|
* The following is a bit paranoid...
|
|
*
|
|
* NB: the datasheet "...CEC will stay active if the SCC is in
|
|
* power-down mode or..." and CCR2.RAC = 1 are two different
|
|
* situations.
|
|
*/
|
|
if (scc_readl_star(dpriv, dev) & SccBusy) {
|
|
netdev_err(dev, "busy - try later\n");
|
|
ret = -EAGAIN;
|
|
goto err_out;
|
|
} else
|
|
netdev_info(dev, "available - good\n");
|
|
|
|
scc_writel(EventsMask, dpriv, dev, IMR);
|
|
|
|
/* Posted write is flushed in the wait_ack loop */
|
|
scc_writel(TxSccRes | RxSccRes, dpriv, dev, CMDR);
|
|
|
|
if ((ret = dscc4_wait_ack_cec(dpriv, dev, "Cec")) < 0)
|
|
goto err_disable_scc_events;
|
|
|
|
/*
|
|
* I would expect XPR near CE completion (before ? after ?).
|
|
* At worst, this code won't see a late XPR and people
|
|
* will have to re-issue an ifconfig (this is harmless).
|
|
* WARNING, a really missing XPR usually means a hardware
|
|
* reset is needed. Suggestions anyone ?
|
|
*/
|
|
if ((ret = dscc4_xpr_ack(dpriv)) < 0) {
|
|
pr_err("XPR timeout\n");
|
|
goto err_disable_scc_events;
|
|
}
|
|
|
|
if (debug > 2)
|
|
dscc4_tx_print(dev, dpriv, "Open");
|
|
|
|
done:
|
|
netif_start_queue(dev);
|
|
|
|
init_timer(&dpriv->timer);
|
|
dpriv->timer.expires = jiffies + 10*HZ;
|
|
dpriv->timer.data = (unsigned long)dev;
|
|
dpriv->timer.function = dscc4_timer;
|
|
add_timer(&dpriv->timer);
|
|
netif_carrier_on(dev);
|
|
|
|
return 0;
|
|
|
|
err_disable_scc_events:
|
|
scc_writel(0xffffffff, dpriv, dev, IMR);
|
|
scc_patchl(PowerUp | Vis, 0, dpriv, dev, CCR0);
|
|
err_out:
|
|
hdlc_close(dev);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
#ifdef DSCC4_POLLING
|
|
static int dscc4_tx_poll(struct dscc4_dev_priv *dpriv, struct net_device *dev)
|
|
{
|
|
/* FIXME: it's gonna be easy (TM), for sure */
|
|
}
|
|
#endif /* DSCC4_POLLING */
|
|
|
|
static netdev_tx_t dscc4_start_xmit(struct sk_buff *skb,
|
|
struct net_device *dev)
|
|
{
|
|
struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
|
|
struct dscc4_pci_priv *ppriv = dpriv->pci_priv;
|
|
struct TxFD *tx_fd;
|
|
int next;
|
|
|
|
next = dpriv->tx_current%TX_RING_SIZE;
|
|
dpriv->tx_skbuff[next] = skb;
|
|
tx_fd = dpriv->tx_fd + next;
|
|
tx_fd->state = FrameEnd | TO_STATE_TX(skb->len);
|
|
tx_fd->data = cpu_to_le32(pci_map_single(ppriv->pdev, skb->data, skb->len,
|
|
PCI_DMA_TODEVICE));
|
|
tx_fd->complete = 0x00000000;
|
|
tx_fd->jiffies = jiffies;
|
|
mb();
|
|
|
|
#ifdef DSCC4_POLLING
|
|
spin_lock(&dpriv->lock);
|
|
while (dscc4_tx_poll(dpriv, dev));
|
|
spin_unlock(&dpriv->lock);
|
|
#endif
|
|
|
|
if (debug > 2)
|
|
dscc4_tx_print(dev, dpriv, "Xmit");
|
|
/* To be cleaned(unsigned int)/optimized. Later, ok ? */
|
|
if (!((++dpriv->tx_current - dpriv->tx_dirty)%TX_RING_SIZE))
|
|
netif_stop_queue(dev);
|
|
|
|
if (dscc4_tx_quiescent(dpriv, dev))
|
|
dscc4_do_tx(dpriv, dev);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static int dscc4_close(struct net_device *dev)
|
|
{
|
|
struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
|
|
|
|
del_timer_sync(&dpriv->timer);
|
|
netif_stop_queue(dev);
|
|
|
|
scc_patchl(PowerUp | Vis, 0, dpriv, dev, CCR0);
|
|
scc_patchl(0x00050000, 0, dpriv, dev, CCR2);
|
|
scc_writel(0xffffffff, dpriv, dev, IMR);
|
|
|
|
dpriv->flags |= FakeReset;
|
|
|
|
hdlc_close(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int dscc4_check_clock_ability(int port)
|
|
{
|
|
int ret = 0;
|
|
|
|
#ifdef CONFIG_DSCC4_PCISYNC
|
|
if (port >= 2)
|
|
ret = -1;
|
|
#endif
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* DS1 p.137: "There are a total of 13 different clocking modes..."
|
|
* ^^
|
|
* Design choices:
|
|
* - by default, assume a clock is provided on pin RxClk/TxClk (clock mode 0a).
|
|
* Clock mode 3b _should_ work but the testing seems to make this point
|
|
* dubious (DIY testing requires setting CCR0 at 0x00000033).
|
|
* This is supposed to provide least surprise "DTE like" behavior.
|
|
* - if line rate is specified, clocks are assumed to be locally generated.
|
|
* A quartz must be available (on pin XTAL1). Modes 6b/7b are used. Choosing
|
|
* between these it automagically done according on the required frequency
|
|
* scaling. Of course some rounding may take place.
|
|
* - no high speed mode (40Mb/s). May be trivial to do but I don't have an
|
|
* appropriate external clocking device for testing.
|
|
* - no time-slot/clock mode 5: shameless laziness.
|
|
*
|
|
* The clock signals wiring can be (is ?) manufacturer dependent. Good luck.
|
|
*
|
|
* BIG FAT WARNING: if the device isn't provided enough clocking signal, it
|
|
* won't pass the init sequence. For example, straight back-to-back DTE without
|
|
* external clock will fail when dscc4_open() (<- 'ifconfig hdlcx xxx') is
|
|
* called.
|
|
*
|
|
* Typos lurk in datasheet (missing divier in clock mode 7a figure 51 p.153
|
|
* DS0 for example)
|
|
*
|
|
* Clock mode related bits of CCR0:
|
|
* +------------ TOE: output TxClk (0b/2b/3a/3b/6b/7a/7b only)
|
|
* | +---------- SSEL: sub-mode select 0 -> a, 1 -> b
|
|
* | | +-------- High Speed: say 0
|
|
* | | | +-+-+-- Clock Mode: 0..7
|
|
* | | | | | |
|
|
* -+-+-+-+-+-+-+-+
|
|
* x|x|5|4|3|2|1|0| lower bits
|
|
*
|
|
* Division factor of BRR: k = (N+1)x2^M (total divider = 16xk in mode 6b)
|
|
* +-+-+-+------------------ M (0..15)
|
|
* | | | | +-+-+-+-+-+-- N (0..63)
|
|
* 0 0 0 0 | | | | 0 0 | | | | | |
|
|
* ...-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|
|
* f|e|d|c|b|a|9|8|7|6|5|4|3|2|1|0| lower bits
|
|
*
|
|
*/
|
|
static int dscc4_set_clock(struct net_device *dev, u32 *bps, u32 *state)
|
|
{
|
|
struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
|
|
int ret = -1;
|
|
u32 brr;
|
|
|
|
*state &= ~Ccr0ClockMask;
|
|
if (*bps) { /* Clock generated - required for DCE */
|
|
u32 n = 0, m = 0, divider;
|
|
int xtal;
|
|
|
|
xtal = dpriv->pci_priv->xtal_hz;
|
|
if (!xtal)
|
|
goto done;
|
|
if (dscc4_check_clock_ability(dpriv->dev_id) < 0)
|
|
goto done;
|
|
divider = xtal / *bps;
|
|
if (divider > BRR_DIVIDER_MAX) {
|
|
divider >>= 4;
|
|
*state |= 0x00000036; /* Clock mode 6b (BRG/16) */
|
|
} else
|
|
*state |= 0x00000037; /* Clock mode 7b (BRG) */
|
|
if (divider >> 22) {
|
|
n = 63;
|
|
m = 15;
|
|
} else if (divider) {
|
|
/* Extraction of the 6 highest weighted bits */
|
|
m = 0;
|
|
while (0xffffffc0 & divider) {
|
|
m++;
|
|
divider >>= 1;
|
|
}
|
|
n = divider;
|
|
}
|
|
brr = (m << 8) | n;
|
|
divider = n << m;
|
|
if (!(*state & 0x00000001)) /* ?b mode mask => clock mode 6b */
|
|
divider <<= 4;
|
|
*bps = xtal / divider;
|
|
} else {
|
|
/*
|
|
* External clock - DTE
|
|
* "state" already reflects Clock mode 0a (CCR0 = 0xzzzzzz00).
|
|
* Nothing more to be done
|
|
*/
|
|
brr = 0;
|
|
}
|
|
scc_writel(brr, dpriv, dev, BRR);
|
|
ret = 0;
|
|
done:
|
|
return ret;
|
|
}
|
|
|
|
static int dscc4_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
|
|
{
|
|
sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
|
|
struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
|
|
const size_t size = sizeof(dpriv->settings);
|
|
int ret = 0;
|
|
|
|
if (dev->flags & IFF_UP)
|
|
return -EBUSY;
|
|
|
|
if (cmd != SIOCWANDEV)
|
|
return -EOPNOTSUPP;
|
|
|
|
switch(ifr->ifr_settings.type) {
|
|
case IF_GET_IFACE:
|
|
ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
|
|
if (ifr->ifr_settings.size < size) {
|
|
ifr->ifr_settings.size = size; /* data size wanted */
|
|
return -ENOBUFS;
|
|
}
|
|
if (copy_to_user(line, &dpriv->settings, size))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case IF_IFACE_SYNC_SERIAL:
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
|
|
if (dpriv->flags & FakeReset) {
|
|
netdev_info(dev, "please reset the device before this command\n");
|
|
return -EPERM;
|
|
}
|
|
if (copy_from_user(&dpriv->settings, line, size))
|
|
return -EFAULT;
|
|
ret = dscc4_set_iface(dpriv, dev);
|
|
break;
|
|
|
|
default:
|
|
ret = hdlc_ioctl(dev, ifr, cmd);
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dscc4_match(const struct thingie *p, int value)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; p[i].define != -1; i++) {
|
|
if (value == p[i].define)
|
|
break;
|
|
}
|
|
if (p[i].define == -1)
|
|
return -1;
|
|
else
|
|
return i;
|
|
}
|
|
|
|
static int dscc4_clock_setting(struct dscc4_dev_priv *dpriv,
|
|
struct net_device *dev)
|
|
{
|
|
sync_serial_settings *settings = &dpriv->settings;
|
|
int ret = -EOPNOTSUPP;
|
|
u32 bps, state;
|
|
|
|
bps = settings->clock_rate;
|
|
state = scc_readl(dpriv, CCR0);
|
|
if (dscc4_set_clock(dev, &bps, &state) < 0)
|
|
goto done;
|
|
if (bps) { /* DCE */
|
|
printk(KERN_DEBUG "%s: generated RxClk (DCE)\n", dev->name);
|
|
if (settings->clock_rate != bps) {
|
|
printk(KERN_DEBUG "%s: clock adjusted (%08d -> %08d)\n",
|
|
dev->name, settings->clock_rate, bps);
|
|
settings->clock_rate = bps;
|
|
}
|
|
} else { /* DTE */
|
|
state |= PowerUp | Vis;
|
|
printk(KERN_DEBUG "%s: external RxClk (DTE)\n", dev->name);
|
|
}
|
|
scc_writel(state, dpriv, dev, CCR0);
|
|
ret = 0;
|
|
done:
|
|
return ret;
|
|
}
|
|
|
|
static int dscc4_encoding_setting(struct dscc4_dev_priv *dpriv,
|
|
struct net_device *dev)
|
|
{
|
|
static const struct thingie encoding[] = {
|
|
{ ENCODING_NRZ, 0x00000000 },
|
|
{ ENCODING_NRZI, 0x00200000 },
|
|
{ ENCODING_FM_MARK, 0x00400000 },
|
|
{ ENCODING_FM_SPACE, 0x00500000 },
|
|
{ ENCODING_MANCHESTER, 0x00600000 },
|
|
{ -1, 0}
|
|
};
|
|
int i, ret = 0;
|
|
|
|
i = dscc4_match(encoding, dpriv->encoding);
|
|
if (i >= 0)
|
|
scc_patchl(EncodingMask, encoding[i].bits, dpriv, dev, CCR0);
|
|
else
|
|
ret = -EOPNOTSUPP;
|
|
return ret;
|
|
}
|
|
|
|
static int dscc4_loopback_setting(struct dscc4_dev_priv *dpriv,
|
|
struct net_device *dev)
|
|
{
|
|
sync_serial_settings *settings = &dpriv->settings;
|
|
u32 state;
|
|
|
|
state = scc_readl(dpriv, CCR1);
|
|
if (settings->loopback) {
|
|
printk(KERN_DEBUG "%s: loopback\n", dev->name);
|
|
state |= 0x00000100;
|
|
} else {
|
|
printk(KERN_DEBUG "%s: normal\n", dev->name);
|
|
state &= ~0x00000100;
|
|
}
|
|
scc_writel(state, dpriv, dev, CCR1);
|
|
return 0;
|
|
}
|
|
|
|
static int dscc4_crc_setting(struct dscc4_dev_priv *dpriv,
|
|
struct net_device *dev)
|
|
{
|
|
static const struct thingie crc[] = {
|
|
{ PARITY_CRC16_PR0_CCITT, 0x00000010 },
|
|
{ PARITY_CRC16_PR1_CCITT, 0x00000000 },
|
|
{ PARITY_CRC32_PR0_CCITT, 0x00000011 },
|
|
{ PARITY_CRC32_PR1_CCITT, 0x00000001 }
|
|
};
|
|
int i, ret = 0;
|
|
|
|
i = dscc4_match(crc, dpriv->parity);
|
|
if (i >= 0)
|
|
scc_patchl(CrcMask, crc[i].bits, dpriv, dev, CCR1);
|
|
else
|
|
ret = -EOPNOTSUPP;
|
|
return ret;
|
|
}
|
|
|
|
static int dscc4_set_iface(struct dscc4_dev_priv *dpriv, struct net_device *dev)
|
|
{
|
|
struct {
|
|
int (*action)(struct dscc4_dev_priv *, struct net_device *);
|
|
} *p, do_setting[] = {
|
|
{ dscc4_encoding_setting },
|
|
{ dscc4_clock_setting },
|
|
{ dscc4_loopback_setting },
|
|
{ dscc4_crc_setting },
|
|
{ NULL }
|
|
};
|
|
int ret = 0;
|
|
|
|
for (p = do_setting; p->action; p++) {
|
|
if ((ret = p->action(dpriv, dev)) < 0)
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t dscc4_irq(int irq, void *token)
|
|
{
|
|
struct dscc4_dev_priv *root = token;
|
|
struct dscc4_pci_priv *priv;
|
|
struct net_device *dev;
|
|
void __iomem *ioaddr;
|
|
u32 state;
|
|
unsigned long flags;
|
|
int i, handled = 1;
|
|
|
|
priv = root->pci_priv;
|
|
dev = dscc4_to_dev(root);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
ioaddr = root->base_addr;
|
|
|
|
state = readl(ioaddr + GSTAR);
|
|
if (!state) {
|
|
handled = 0;
|
|
goto out;
|
|
}
|
|
if (debug > 3)
|
|
printk(KERN_DEBUG "%s: GSTAR = 0x%08x\n", DRV_NAME, state);
|
|
writel(state, ioaddr + GSTAR);
|
|
|
|
if (state & Arf) {
|
|
netdev_err(dev, "failure (Arf). Harass the maintainer\n");
|
|
goto out;
|
|
}
|
|
state &= ~ArAck;
|
|
if (state & Cfg) {
|
|
if (debug > 0)
|
|
printk(KERN_DEBUG "%s: CfgIV\n", DRV_NAME);
|
|
if (priv->iqcfg[priv->cfg_cur++%IRQ_RING_SIZE] & cpu_to_le32(Arf))
|
|
netdev_err(dev, "CFG failed\n");
|
|
if (!(state &= ~Cfg))
|
|
goto out;
|
|
}
|
|
if (state & RxEvt) {
|
|
i = dev_per_card - 1;
|
|
do {
|
|
dscc4_rx_irq(priv, root + i);
|
|
} while (--i >= 0);
|
|
state &= ~RxEvt;
|
|
}
|
|
if (state & TxEvt) {
|
|
i = dev_per_card - 1;
|
|
do {
|
|
dscc4_tx_irq(priv, root + i);
|
|
} while (--i >= 0);
|
|
state &= ~TxEvt;
|
|
}
|
|
out:
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static void dscc4_tx_irq(struct dscc4_pci_priv *ppriv,
|
|
struct dscc4_dev_priv *dpriv)
|
|
{
|
|
struct net_device *dev = dscc4_to_dev(dpriv);
|
|
u32 state;
|
|
int cur, loop = 0;
|
|
|
|
try:
|
|
cur = dpriv->iqtx_current%IRQ_RING_SIZE;
|
|
state = le32_to_cpu(dpriv->iqtx[cur]);
|
|
if (!state) {
|
|
if (debug > 4)
|
|
printk(KERN_DEBUG "%s: Tx ISR = 0x%08x\n", dev->name,
|
|
state);
|
|
if ((debug > 1) && (loop > 1))
|
|
printk(KERN_DEBUG "%s: Tx irq loop=%d\n", dev->name, loop);
|
|
if (loop && netif_queue_stopped(dev))
|
|
if ((dpriv->tx_current - dpriv->tx_dirty)%TX_RING_SIZE)
|
|
netif_wake_queue(dev);
|
|
|
|
if (netif_running(dev) && dscc4_tx_quiescent(dpriv, dev) &&
|
|
!dscc4_tx_done(dpriv))
|
|
dscc4_do_tx(dpriv, dev);
|
|
return;
|
|
}
|
|
loop++;
|
|
dpriv->iqtx[cur] = 0;
|
|
dpriv->iqtx_current++;
|
|
|
|
if (state_check(state, dpriv, dev, "Tx") < 0)
|
|
return;
|
|
|
|
if (state & SccEvt) {
|
|
if (state & Alls) {
|
|
struct sk_buff *skb;
|
|
struct TxFD *tx_fd;
|
|
|
|
if (debug > 2)
|
|
dscc4_tx_print(dev, dpriv, "Alls");
|
|
/*
|
|
* DataComplete can't be trusted for Tx completion.
|
|
* Cf errata DS5 p.8
|
|
*/
|
|
cur = dpriv->tx_dirty%TX_RING_SIZE;
|
|
tx_fd = dpriv->tx_fd + cur;
|
|
skb = dpriv->tx_skbuff[cur];
|
|
if (skb) {
|
|
pci_unmap_single(ppriv->pdev, le32_to_cpu(tx_fd->data),
|
|
skb->len, PCI_DMA_TODEVICE);
|
|
if (tx_fd->state & FrameEnd) {
|
|
dev->stats.tx_packets++;
|
|
dev->stats.tx_bytes += skb->len;
|
|
}
|
|
dev_kfree_skb_irq(skb);
|
|
dpriv->tx_skbuff[cur] = NULL;
|
|
++dpriv->tx_dirty;
|
|
} else {
|
|
if (debug > 1)
|
|
netdev_err(dev, "Tx: NULL skb %d\n",
|
|
cur);
|
|
}
|
|
/*
|
|
* If the driver ends sending crap on the wire, it
|
|
* will be way easier to diagnose than the (not so)
|
|
* random freeze induced by null sized tx frames.
|
|
*/
|
|
tx_fd->data = tx_fd->next;
|
|
tx_fd->state = FrameEnd | TO_STATE_TX(2*DUMMY_SKB_SIZE);
|
|
tx_fd->complete = 0x00000000;
|
|
tx_fd->jiffies = 0;
|
|
|
|
if (!(state &= ~Alls))
|
|
goto try;
|
|
}
|
|
/*
|
|
* Transmit Data Underrun
|
|
*/
|
|
if (state & Xdu) {
|
|
netdev_err(dev, "Tx Data Underrun. Ask maintainer\n");
|
|
dpriv->flags = NeedIDT;
|
|
/* Tx reset */
|
|
writel(MTFi | Rdt,
|
|
dpriv->base_addr + 0x0c*dpriv->dev_id + CH0CFG);
|
|
writel(Action, dpriv->base_addr + GCMDR);
|
|
return;
|
|
}
|
|
if (state & Cts) {
|
|
netdev_info(dev, "CTS transition\n");
|
|
if (!(state &= ~Cts)) /* DEBUG */
|
|
goto try;
|
|
}
|
|
if (state & Xmr) {
|
|
/* Frame needs to be sent again - FIXME */
|
|
netdev_err(dev, "Tx ReTx. Ask maintainer\n");
|
|
if (!(state &= ~Xmr)) /* DEBUG */
|
|
goto try;
|
|
}
|
|
if (state & Xpr) {
|
|
void __iomem *scc_addr;
|
|
unsigned long ring;
|
|
int i;
|
|
|
|
/*
|
|
* - the busy condition happens (sometimes);
|
|
* - it doesn't seem to make the handler unreliable.
|
|
*/
|
|
for (i = 1; i; i <<= 1) {
|
|
if (!(scc_readl_star(dpriv, dev) & SccBusy))
|
|
break;
|
|
}
|
|
if (!i)
|
|
netdev_info(dev, "busy in irq\n");
|
|
|
|
scc_addr = dpriv->base_addr + 0x0c*dpriv->dev_id;
|
|
/* Keep this order: IDT before IDR */
|
|
if (dpriv->flags & NeedIDT) {
|
|
if (debug > 2)
|
|
dscc4_tx_print(dev, dpriv, "Xpr");
|
|
ring = dpriv->tx_fd_dma +
|
|
(dpriv->tx_dirty%TX_RING_SIZE)*
|
|
sizeof(struct TxFD);
|
|
writel(ring, scc_addr + CH0BTDA);
|
|
dscc4_do_tx(dpriv, dev);
|
|
writel(MTFi | Idt, scc_addr + CH0CFG);
|
|
if (dscc4_do_action(dev, "IDT") < 0)
|
|
goto err_xpr;
|
|
dpriv->flags &= ~NeedIDT;
|
|
}
|
|
if (dpriv->flags & NeedIDR) {
|
|
ring = dpriv->rx_fd_dma +
|
|
(dpriv->rx_current%RX_RING_SIZE)*
|
|
sizeof(struct RxFD);
|
|
writel(ring, scc_addr + CH0BRDA);
|
|
dscc4_rx_update(dpriv, dev);
|
|
writel(MTFi | Idr, scc_addr + CH0CFG);
|
|
if (dscc4_do_action(dev, "IDR") < 0)
|
|
goto err_xpr;
|
|
dpriv->flags &= ~NeedIDR;
|
|
smp_wmb();
|
|
/* Activate receiver and misc */
|
|
scc_writel(0x08050008, dpriv, dev, CCR2);
|
|
}
|
|
err_xpr:
|
|
if (!(state &= ~Xpr))
|
|
goto try;
|
|
}
|
|
if (state & Cd) {
|
|
if (debug > 0)
|
|
netdev_info(dev, "CD transition\n");
|
|
if (!(state &= ~Cd)) /* DEBUG */
|
|
goto try;
|
|
}
|
|
} else { /* ! SccEvt */
|
|
if (state & Hi) {
|
|
#ifdef DSCC4_POLLING
|
|
while (!dscc4_tx_poll(dpriv, dev));
|
|
#endif
|
|
netdev_info(dev, "Tx Hi\n");
|
|
state &= ~Hi;
|
|
}
|
|
if (state & Err) {
|
|
netdev_info(dev, "Tx ERR\n");
|
|
dev->stats.tx_errors++;
|
|
state &= ~Err;
|
|
}
|
|
}
|
|
goto try;
|
|
}
|
|
|
|
static void dscc4_rx_irq(struct dscc4_pci_priv *priv,
|
|
struct dscc4_dev_priv *dpriv)
|
|
{
|
|
struct net_device *dev = dscc4_to_dev(dpriv);
|
|
u32 state;
|
|
int cur;
|
|
|
|
try:
|
|
cur = dpriv->iqrx_current%IRQ_RING_SIZE;
|
|
state = le32_to_cpu(dpriv->iqrx[cur]);
|
|
if (!state)
|
|
return;
|
|
dpriv->iqrx[cur] = 0;
|
|
dpriv->iqrx_current++;
|
|
|
|
if (state_check(state, dpriv, dev, "Rx") < 0)
|
|
return;
|
|
|
|
if (!(state & SccEvt)){
|
|
struct RxFD *rx_fd;
|
|
|
|
if (debug > 4)
|
|
printk(KERN_DEBUG "%s: Rx ISR = 0x%08x\n", dev->name,
|
|
state);
|
|
state &= 0x00ffffff;
|
|
if (state & Err) { /* Hold or reset */
|
|
printk(KERN_DEBUG "%s: Rx ERR\n", dev->name);
|
|
cur = dpriv->rx_current%RX_RING_SIZE;
|
|
rx_fd = dpriv->rx_fd + cur;
|
|
/*
|
|
* Presume we're not facing a DMAC receiver reset.
|
|
* As We use the rx size-filtering feature of the
|
|
* DSCC4, the beginning of a new frame is waiting in
|
|
* the rx fifo. I bet a Receive Data Overflow will
|
|
* happen most of time but let's try and avoid it.
|
|
* Btw (as for RDO) if one experiences ERR whereas
|
|
* the system looks rather idle, there may be a
|
|
* problem with latency. In this case, increasing
|
|
* RX_RING_SIZE may help.
|
|
*/
|
|
//while (dpriv->rx_needs_refill) {
|
|
while (!(rx_fd->state1 & Hold)) {
|
|
rx_fd++;
|
|
cur++;
|
|
if (!(cur = cur%RX_RING_SIZE))
|
|
rx_fd = dpriv->rx_fd;
|
|
}
|
|
//dpriv->rx_needs_refill--;
|
|
try_get_rx_skb(dpriv, dev);
|
|
if (!rx_fd->data)
|
|
goto try;
|
|
rx_fd->state1 &= ~Hold;
|
|
rx_fd->state2 = 0x00000000;
|
|
rx_fd->end = cpu_to_le32(0xbabeface);
|
|
//}
|
|
goto try;
|
|
}
|
|
if (state & Fi) {
|
|
dscc4_rx_skb(dpriv, dev);
|
|
goto try;
|
|
}
|
|
if (state & Hi ) { /* HI bit */
|
|
netdev_info(dev, "Rx Hi\n");
|
|
state &= ~Hi;
|
|
goto try;
|
|
}
|
|
} else { /* SccEvt */
|
|
if (debug > 1) {
|
|
//FIXME: verifier la presence de tous les evenements
|
|
static struct {
|
|
u32 mask;
|
|
const char *irq_name;
|
|
} evts[] = {
|
|
{ 0x00008000, "TIN"},
|
|
{ 0x00000020, "RSC"},
|
|
{ 0x00000010, "PCE"},
|
|
{ 0x00000008, "PLLA"},
|
|
{ 0, NULL}
|
|
}, *evt;
|
|
|
|
for (evt = evts; evt->irq_name; evt++) {
|
|
if (state & evt->mask) {
|
|
printk(KERN_DEBUG "%s: %s\n",
|
|
dev->name, evt->irq_name);
|
|
if (!(state &= ~evt->mask))
|
|
goto try;
|
|
}
|
|
}
|
|
} else {
|
|
if (!(state &= ~0x0000c03c))
|
|
goto try;
|
|
}
|
|
if (state & Cts) {
|
|
netdev_info(dev, "CTS transition\n");
|
|
if (!(state &= ~Cts)) /* DEBUG */
|
|
goto try;
|
|
}
|
|
/*
|
|
* Receive Data Overflow (FIXME: fscked)
|
|
*/
|
|
if (state & Rdo) {
|
|
struct RxFD *rx_fd;
|
|
void __iomem *scc_addr;
|
|
int cur;
|
|
|
|
//if (debug)
|
|
// dscc4_rx_dump(dpriv);
|
|
scc_addr = dpriv->base_addr + 0x0c*dpriv->dev_id;
|
|
|
|
scc_patchl(RxActivate, 0, dpriv, dev, CCR2);
|
|
/*
|
|
* This has no effect. Why ?
|
|
* ORed with TxSccRes, one sees the CFG ack (for
|
|
* the TX part only).
|
|
*/
|
|
scc_writel(RxSccRes, dpriv, dev, CMDR);
|
|
dpriv->flags |= RdoSet;
|
|
|
|
/*
|
|
* Let's try and save something in the received data.
|
|
* rx_current must be incremented at least once to
|
|
* avoid HOLD in the BRDA-to-be-pointed desc.
|
|
*/
|
|
do {
|
|
cur = dpriv->rx_current++%RX_RING_SIZE;
|
|
rx_fd = dpriv->rx_fd + cur;
|
|
if (!(rx_fd->state2 & DataComplete))
|
|
break;
|
|
if (rx_fd->state2 & FrameAborted) {
|
|
dev->stats.rx_over_errors++;
|
|
rx_fd->state1 |= Hold;
|
|
rx_fd->state2 = 0x00000000;
|
|
rx_fd->end = cpu_to_le32(0xbabeface);
|
|
} else
|
|
dscc4_rx_skb(dpriv, dev);
|
|
} while (1);
|
|
|
|
if (debug > 0) {
|
|
if (dpriv->flags & RdoSet)
|
|
printk(KERN_DEBUG
|
|
"%s: no RDO in Rx data\n", DRV_NAME);
|
|
}
|
|
#ifdef DSCC4_RDO_EXPERIMENTAL_RECOVERY
|
|
/*
|
|
* FIXME: must the reset be this violent ?
|
|
*/
|
|
#warning "FIXME: CH0BRDA"
|
|
writel(dpriv->rx_fd_dma +
|
|
(dpriv->rx_current%RX_RING_SIZE)*
|
|
sizeof(struct RxFD), scc_addr + CH0BRDA);
|
|
writel(MTFi|Rdr|Idr, scc_addr + CH0CFG);
|
|
if (dscc4_do_action(dev, "RDR") < 0) {
|
|
netdev_err(dev, "RDO recovery failed(RDR)\n");
|
|
goto rdo_end;
|
|
}
|
|
writel(MTFi|Idr, scc_addr + CH0CFG);
|
|
if (dscc4_do_action(dev, "IDR") < 0) {
|
|
netdev_err(dev, "RDO recovery failed(IDR)\n");
|
|
goto rdo_end;
|
|
}
|
|
rdo_end:
|
|
#endif
|
|
scc_patchl(0, RxActivate, dpriv, dev, CCR2);
|
|
goto try;
|
|
}
|
|
if (state & Cd) {
|
|
netdev_info(dev, "CD transition\n");
|
|
if (!(state &= ~Cd)) /* DEBUG */
|
|
goto try;
|
|
}
|
|
if (state & Flex) {
|
|
printk(KERN_DEBUG "%s: Flex. Ttttt...\n", DRV_NAME);
|
|
if (!(state &= ~Flex))
|
|
goto try;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* I had expected the following to work for the first descriptor
|
|
* (tx_fd->state = 0xc0000000)
|
|
* - Hold=1 (don't try and branch to the next descripto);
|
|
* - No=0 (I want an empty data section, i.e. size=0);
|
|
* - Fe=1 (required by No=0 or we got an Err irq and must reset).
|
|
* It failed and locked solid. Thus the introduction of a dummy skb.
|
|
* Problem is acknowledged in errata sheet DS5. Joy :o/
|
|
*/
|
|
static struct sk_buff *dscc4_init_dummy_skb(struct dscc4_dev_priv *dpriv)
|
|
{
|
|
struct sk_buff *skb;
|
|
|
|
skb = dev_alloc_skb(DUMMY_SKB_SIZE);
|
|
if (skb) {
|
|
int last = dpriv->tx_dirty%TX_RING_SIZE;
|
|
struct TxFD *tx_fd = dpriv->tx_fd + last;
|
|
|
|
skb->len = DUMMY_SKB_SIZE;
|
|
skb_copy_to_linear_data(skb, version,
|
|
strlen(version) % DUMMY_SKB_SIZE);
|
|
tx_fd->state = FrameEnd | TO_STATE_TX(DUMMY_SKB_SIZE);
|
|
tx_fd->data = cpu_to_le32(pci_map_single(dpriv->pci_priv->pdev,
|
|
skb->data, DUMMY_SKB_SIZE,
|
|
PCI_DMA_TODEVICE));
|
|
dpriv->tx_skbuff[last] = skb;
|
|
}
|
|
return skb;
|
|
}
|
|
|
|
static int dscc4_init_ring(struct net_device *dev)
|
|
{
|
|
struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
|
|
struct pci_dev *pdev = dpriv->pci_priv->pdev;
|
|
struct TxFD *tx_fd;
|
|
struct RxFD *rx_fd;
|
|
void *ring;
|
|
int i;
|
|
|
|
ring = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &dpriv->rx_fd_dma);
|
|
if (!ring)
|
|
goto err_out;
|
|
dpriv->rx_fd = rx_fd = (struct RxFD *) ring;
|
|
|
|
ring = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &dpriv->tx_fd_dma);
|
|
if (!ring)
|
|
goto err_free_dma_rx;
|
|
dpriv->tx_fd = tx_fd = (struct TxFD *) ring;
|
|
|
|
memset(dpriv->tx_skbuff, 0, sizeof(struct sk_buff *)*TX_RING_SIZE);
|
|
dpriv->tx_dirty = 0xffffffff;
|
|
i = dpriv->tx_current = 0;
|
|
do {
|
|
tx_fd->state = FrameEnd | TO_STATE_TX(2*DUMMY_SKB_SIZE);
|
|
tx_fd->complete = 0x00000000;
|
|
/* FIXME: NULL should be ok - to be tried */
|
|
tx_fd->data = cpu_to_le32(dpriv->tx_fd_dma);
|
|
(tx_fd++)->next = cpu_to_le32(dpriv->tx_fd_dma +
|
|
(++i%TX_RING_SIZE)*sizeof(*tx_fd));
|
|
} while (i < TX_RING_SIZE);
|
|
|
|
if (!dscc4_init_dummy_skb(dpriv))
|
|
goto err_free_dma_tx;
|
|
|
|
memset(dpriv->rx_skbuff, 0, sizeof(struct sk_buff *)*RX_RING_SIZE);
|
|
i = dpriv->rx_dirty = dpriv->rx_current = 0;
|
|
do {
|
|
/* size set by the host. Multiple of 4 bytes please */
|
|
rx_fd->state1 = HiDesc;
|
|
rx_fd->state2 = 0x00000000;
|
|
rx_fd->end = cpu_to_le32(0xbabeface);
|
|
rx_fd->state1 |= TO_STATE_RX(HDLC_MAX_MRU);
|
|
// FIXME: return value verifiee mais traitement suspect
|
|
if (try_get_rx_skb(dpriv, dev) >= 0)
|
|
dpriv->rx_dirty++;
|
|
(rx_fd++)->next = cpu_to_le32(dpriv->rx_fd_dma +
|
|
(++i%RX_RING_SIZE)*sizeof(*rx_fd));
|
|
} while (i < RX_RING_SIZE);
|
|
|
|
return 0;
|
|
|
|
err_free_dma_tx:
|
|
pci_free_consistent(pdev, TX_TOTAL_SIZE, ring, dpriv->tx_fd_dma);
|
|
err_free_dma_rx:
|
|
pci_free_consistent(pdev, RX_TOTAL_SIZE, rx_fd, dpriv->rx_fd_dma);
|
|
err_out:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void dscc4_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct dscc4_pci_priv *ppriv;
|
|
struct dscc4_dev_priv *root;
|
|
void __iomem *ioaddr;
|
|
int i;
|
|
|
|
ppriv = pci_get_drvdata(pdev);
|
|
root = ppriv->root;
|
|
|
|
ioaddr = root->base_addr;
|
|
|
|
dscc4_pci_reset(pdev, ioaddr);
|
|
|
|
free_irq(pdev->irq, root);
|
|
pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32), ppriv->iqcfg,
|
|
ppriv->iqcfg_dma);
|
|
for (i = 0; i < dev_per_card; i++) {
|
|
struct dscc4_dev_priv *dpriv = root + i;
|
|
|
|
dscc4_release_ring(dpriv);
|
|
pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32),
|
|
dpriv->iqrx, dpriv->iqrx_dma);
|
|
pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32),
|
|
dpriv->iqtx, dpriv->iqtx_dma);
|
|
}
|
|
|
|
dscc4_free1(pdev);
|
|
|
|
iounmap(ioaddr);
|
|
|
|
pci_release_region(pdev, 1);
|
|
pci_release_region(pdev, 0);
|
|
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
static int dscc4_hdlc_attach(struct net_device *dev, unsigned short encoding,
|
|
unsigned short parity)
|
|
{
|
|
struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
|
|
|
|
if (encoding != ENCODING_NRZ &&
|
|
encoding != ENCODING_NRZI &&
|
|
encoding != ENCODING_FM_MARK &&
|
|
encoding != ENCODING_FM_SPACE &&
|
|
encoding != ENCODING_MANCHESTER)
|
|
return -EINVAL;
|
|
|
|
if (parity != PARITY_NONE &&
|
|
parity != PARITY_CRC16_PR0_CCITT &&
|
|
parity != PARITY_CRC16_PR1_CCITT &&
|
|
parity != PARITY_CRC32_PR0_CCITT &&
|
|
parity != PARITY_CRC32_PR1_CCITT)
|
|
return -EINVAL;
|
|
|
|
dpriv->encoding = encoding;
|
|
dpriv->parity = parity;
|
|
return 0;
|
|
}
|
|
|
|
#ifndef MODULE
|
|
static int __init dscc4_setup(char *str)
|
|
{
|
|
int *args[] = { &debug, &quartz, NULL }, **p = args;
|
|
|
|
while (*p && (get_option(&str, *p) == 2))
|
|
p++;
|
|
return 1;
|
|
}
|
|
|
|
__setup("dscc4.setup=", dscc4_setup);
|
|
#endif
|
|
|
|
static DEFINE_PCI_DEVICE_TABLE(dscc4_pci_tbl) = {
|
|
{ PCI_VENDOR_ID_SIEMENS, PCI_DEVICE_ID_SIEMENS_DSCC4,
|
|
PCI_ANY_ID, PCI_ANY_ID, },
|
|
{ 0,}
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, dscc4_pci_tbl);
|
|
|
|
static struct pci_driver dscc4_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = dscc4_pci_tbl,
|
|
.probe = dscc4_init_one,
|
|
.remove = dscc4_remove_one,
|
|
};
|
|
|
|
module_pci_driver(dscc4_driver);
|