mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2025-01-18 19:16:20 +07:00
b98900548b
Add the dmaengine bindings for the X1830 Soc from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/1576591140-125668-3-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
65 lines
1.8 KiB
Plaintext
65 lines
1.8 KiB
Plaintext
* Ingenic XBurst DMA Controller
|
|
|
|
Required properties:
|
|
|
|
- compatible: Should be one of:
|
|
* ingenic,jz4740-dma
|
|
* ingenic,jz4725b-dma
|
|
* ingenic,jz4770-dma
|
|
* ingenic,jz4780-dma
|
|
* ingenic,x1000-dma
|
|
* ingenic,x1830-dma
|
|
- reg: Should contain the DMA channel registers location and length, followed
|
|
by the DMA controller registers location and length.
|
|
- interrupts: Should contain the interrupt specifier of the DMA controller.
|
|
- clocks: Should contain a clock specifier for the JZ4780/X1000/X1830 PDMA
|
|
clock.
|
|
- #dma-cells: Must be <2>. Number of integer cells in the dmas property of
|
|
DMA clients (see below).
|
|
|
|
Optional properties:
|
|
|
|
- ingenic,reserved-channels: Bitmask of channels to reserve for devices that
|
|
need a specific channel. These channels will only be assigned when explicitly
|
|
requested by a client. The primary use for this is channels 0 and 1, which
|
|
can be configured to have special behaviour for NAND/BCH when using
|
|
programmable firmware.
|
|
|
|
Example:
|
|
|
|
dma: dma-controller@13420000 {
|
|
compatible = "ingenic,jz4780-dma";
|
|
reg = <0x13420000 0x400
|
|
0x13421000 0x40>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <10>;
|
|
|
|
clocks = <&cgu JZ4780_CLK_PDMA>;
|
|
|
|
#dma-cells = <2>;
|
|
|
|
ingenic,reserved-channels = <0x3>;
|
|
};
|
|
|
|
DMA clients must use the format described in dma.txt, giving a phandle to the
|
|
DMA controller plus the following 2 integer cells:
|
|
|
|
1. Request type: The DMA request type for transfers to/from the device on
|
|
the allocated channel, as defined in the SoC documentation.
|
|
|
|
2. Channel: If set to 0xffffffff, any available channel will be allocated for
|
|
the client. Otherwise, the exact channel specified will be used. The channel
|
|
should be reserved on the DMA controller using the ingenic,reserved-channels
|
|
property.
|
|
|
|
Example:
|
|
|
|
uart0: serial@10030000 {
|
|
...
|
|
dmas = <&dma 0x14 0xffffffff
|
|
&dma 0x15 0xffffffff>;
|
|
dma-names = "tx", "rx";
|
|
...
|
|
};
|