linux_dsm_epyc7002/scripts/Makefile.headersinst
David Woodhouse df5f6311f1 Make 'headerscheck' stop immediately on an error
This should make it stop immediately after printing the _helpful_ error
message, rather than continuing to spit out many pages more of 'CHECK
include/linux/foo.h' before eventually coming to a halt with something
less obvious.

Now I get this...
  CHECK   include/linux/smb_fs.h
/shiny/git/linux-2.6/usr/include/linux/smb_fs.h requires linux/jiffies.h, which does not exist in exported headers
make[2]: *** [/shiny/git/linux-2.6/usr/include/linux/.check.smb_fs.h] Error 1
make[1]: *** [linux] Error 2
make: *** [headers_check] Error 2

Signed-off-by-if-Sam-says-so: David Woodhouse <dwmw2@infradead.org>
[ Sam had better say so! This made me waste way too much time. - Linus]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21 21:47:27 -07:00

195 lines
6.9 KiB
Makefile

# ==========================================================================
# Installing headers
#
# header-y files will be installed verbatim
# unifdef-y are the files where unifdef will be run before installing files
# objhdr-y are generated files that will be installed verbatim
#
# ==========================================================================
UNIFDEF := scripts/unifdef -U__KERNEL__
# Eliminate the contents of (and inclusions of) compiler.h
HDRSED := sed -e "s/ inline / __inline__ /g" \
-e "s/[[:space:]]__user[[:space:]]\+/ /g" \
-e "s/(__user[[:space:]]\+/ (/g" \
-e "s/[[:space:]]__force[[:space:]]\+/ /g" \
-e "s/(__force[[:space:]]\+/ (/g" \
-e "s/[[:space:]]__iomem[[:space:]]\+/ /g" \
-e "s/(__iomem[[:space:]]\+/ (/g" \
-e "s/[[:space:]]__attribute_const__[[:space:]]\+/\ /g" \
-e "s/[[:space:]]__attribute_const__$$//" \
-e "/^\#include <linux\/compiler.h>/d"
_dst := $(if $(dst),$(dst),$(obj))
ifeq (,$(patsubst include/asm/%,,$(obj)/))
# For producing the generated stuff in include/asm for biarch builds, include
# both sets of Kbuild files; we'll generate anything which is mentioned in
# _either_ arch, and recurse into subdirectories which are mentioned in either
# arch. Since some directories may exist in one but not the other, we must
# use $(wildcard...).
GENASM := 1
archasm := $(subst include/asm,asm-$(ARCH),$(obj))
altarchasm := $(subst include/asm,asm-$(ALTARCH),$(obj))
KBUILDFILES := $(wildcard $(srctree)/include/$(archasm)/Kbuild $(srctree)/include/$(altarchasm)/Kbuild)
else
KBUILDFILES := $(srctree)/$(obj)/Kbuild
endif
include $(KBUILDFILES)
include scripts/Kbuild.include
# If this is include/asm-$(ARCH) and there's no $(ALTARCH), then
# override $(_dst) so that we install to include/asm directly.
# Unless $(BIASMDIR) is set, in which case we're probably doing
# a 'headers_install_all' build and we should keep the -$(ARCH)
# in the directory name.
ifeq ($(obj)$(ALTARCH),include/asm-$(ARCH)$(BIASMDIR))
_dst := include/asm
endif
header-y := $(sort $(header-y))
unifdef-y := $(sort $(unifdef-y))
subdir-y := $(patsubst %/,%,$(filter %/, $(header-y)))
header-y := $(filter-out %/, $(header-y))
header-y := $(filter-out $(unifdef-y),$(header-y))
# stamp files for header checks
check-y := $(patsubst %,.check.%,$(header-y) $(unifdef-y) $(objhdr-y))
# Work out what needs to be removed
oldheaders := $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$(wildcard $(INSTALL_HDR_PATH)/$(_dst)/*.h))
unwanted := $(filter-out $(header-y) $(unifdef-y) $(objhdr-y),$(oldheaders))
oldcheckstamps := $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$(wildcard $(INSTALL_HDR_PATH)/$(_dst)/.check.*.h))
unwanted += $(filter-out $(check-y),$(oldcheckstamps))
# Prefix them all with full paths to $(INSTALL_HDR_PATH)
header-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(header-y))
unifdef-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(unifdef-y))
objhdr-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(objhdr-y))
check-y := $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(check-y))
ifdef ALTARCH
ifeq ($(obj),include/asm-$(ARCH))
altarch-y := altarch-dir
endif
endif
# Make the definitions visible for recursive make invocations
export ALTARCH
export ARCHDEF
export ALTARCHDEF
quiet_cmd_o_hdr_install = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
cmd_o_hdr_install = cp $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(objtree)/$(obj)/%,$@) \
$(INSTALL_HDR_PATH)/$(_dst)
quiet_cmd_headers_install = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
cmd_headers_install = $(HDRSED) $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(srctree)/$(obj)/%,$@) \
> $@
quiet_cmd_unifdef = UNIFDEF $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
cmd_unifdef = $(UNIFDEF) $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(srctree)/$(obj)/%,$@) \
| $(HDRSED) > $@ || :
quiet_cmd_check = CHECK $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/.check.%,$(_dst)/%,$@)
cmd_check = $(CONFIG_SHELL) $(srctree)/scripts/hdrcheck.sh \
$(INSTALL_HDR_PATH)/include $(subst /.check.,/,$@) $@
quiet_cmd_remove = REMOVE $(_dst)/$@
cmd_remove = rm -f $(INSTALL_HDR_PATH)/$(_dst)/$@
quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
cmd_mkdir = mkdir -p $@
quiet_cmd_gen = GEN $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
cmd_gen = \
FNAME=$(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$@) \
STUBDEF=__ASM_STUB_`echo $$FNAME | tr a-z.- A-Z__`; \
(echo "/* File autogenerated by 'make headers_install' */" ; \
echo "\#ifndef $$STUBDEF" ; \
echo "\#define $$STUBDEF" ; \
echo "\# if $(ARCHDEF)" ; \
if [ -r $(subst /$(_dst)/,/include/$(archasm)/,$@) ]; then \
echo "\# include <$(archasm)/$$FNAME>" ; \
else \
echo "\# error $(archasm)/$$FNAME does not exist in" \
"the $(ARCH) architecture" ; \
fi ; \
echo "\# elif $(ALTARCHDEF)" ; \
if [ -r $(subst /$(_dst)/,/include/$(altarchasm)/,$@) ]; then \
echo "\# include <$(altarchasm)/$$FNAME>" ; \
else \
echo "\# error $(altarchasm)/$$FNAME does not exist in" \
"the $(ALTARCH) architecture" ; \
fi ; \
echo "\# else" ; \
echo "\# warning This machine appears to be" \
"neither $(ARCH) nor $(ALTARCH)." ; \
echo "\# endif" ; \
echo "\#endif /* $$STUBDEF */" ; \
) > $@
.PHONY: __headersinst __headerscheck
ifdef HDRCHECK
__headerscheck: $(subdir-y) $(check-y)
@true
$(check-y) : $(INSTALL_HDR_PATH)/$(_dst)/.check.%.h : $(INSTALL_HDR_PATH)/$(_dst)/%.h
$(call cmd,check)
# Other dependencies for $(check-y)
include /dev/null $(wildcard $(check-y))
# ... but leave $(check-y) as .PHONY for now until those deps are actually correct.
.PHONY: $(check-y)
else
# Rules for installing headers
__headersinst: $(subdir-y) $(header-y) $(unifdef-y) $(altarch-y) $(objhdr-y)
@true
$(objhdr-y) $(subdir-y) $(header-y) $(unifdef-y): | $(INSTALL_HDR_PATH)/$(_dst) $(unwanted)
$(INSTALL_HDR_PATH)/$(_dst):
$(call cmd,mkdir)
.PHONY: $(unwanted)
$(unwanted):
$(call cmd,remove)
ifdef GENASM
$(objhdr-y) $(header-y) $(unifdef-y): $(KBUILDFILES)
$(call cmd,gen)
else
$(objhdr-y) : $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(objtree)/$(obj)/%.h $(KBUILDFILES)
$(call cmd,o_hdr_install)
$(header-y) : $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(KBUILDFILES)
$(call cmd,headers_install)
$(unifdef-y) : $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(KBUILDFILES)
$(call cmd,unifdef)
endif
endif
hdrinst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
.PHONY: altarch-dir
# All the files in the normal arch dir must be created first, since we test
# for their existence.
altarch-dir: $(subdir-y) $(header-y) $(unifdef-y) $(objhdr-y)
$(Q)$(MAKE) $(hdrinst)=include/asm-$(ALTARCH) dst=include/asm-$(ALTARCH)
$(Q)$(MAKE) $(hdrinst)=include/asm dst=include/asm$(BIASMDIR)
# Recursion
.PHONY: $(subdir-y)
$(subdir-y):
$(Q)$(MAKE) $(hdrinst)=$(obj)/$@ dst=$(_dst)/$@ rel=../$(rel)