mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-22 11:09:48 +07:00
22c75545c4
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
484 lines
8.5 KiB
Plaintext
484 lines
8.5 KiB
Plaintext
/*
|
|
* Hitex LPC4350 Evaluation Board
|
|
*
|
|
* Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com>
|
|
*
|
|
* This code is released using a dual license strategy: BSD/GPL
|
|
* You can choose the licence that better fits your requirements.
|
|
*
|
|
* Released under the terms of 3-clause BSD License
|
|
* Released under the terms of GNU General Public License Version 2.0
|
|
*
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "lpc18xx.dtsi"
|
|
#include "lpc4350.dtsi"
|
|
|
|
#include "dt-bindings/input/input.h"
|
|
#include "dt-bindings/gpio/gpio.h"
|
|
|
|
/ {
|
|
model = "Hitex LPC4350 Evaluation Board";
|
|
compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
serial3 = &uart3;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &uart0;
|
|
};
|
|
|
|
memory@28000000 {
|
|
device_type = "memory";
|
|
reg = <0x28000000 0x800000>; /* 8 MB */
|
|
};
|
|
|
|
pca_buttons {
|
|
compatible = "gpio-keys-polled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
poll-interval = <100>;
|
|
autorepeat;
|
|
|
|
button0 {
|
|
label = "joy:right";
|
|
linux,code = <KEY_RIGHT>;
|
|
gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
button1 {
|
|
label = "joy:up";
|
|
linux,code = <KEY_UP>;
|
|
gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
|
|
button2 {
|
|
label = "joy:enter";
|
|
linux,code = <KEY_ENTER>;
|
|
gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
button3 {
|
|
label = "joy:left";
|
|
linux,code = <KEY_LEFT>;
|
|
gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
button4 {
|
|
label = "joy:down";
|
|
linux,code = <KEY_DOWN>;
|
|
gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
button5 {
|
|
label = "user:sw3";
|
|
linux,code = <KEY_F1>;
|
|
gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
button6 {
|
|
label = "user:sw4";
|
|
linux,code = <KEY_F2>;
|
|
gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
button7 {
|
|
label = "user:sw5";
|
|
linux,code = <KEY_F3>;
|
|
gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
pca_leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led0 {
|
|
label = "ext:led0";
|
|
gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
|
|
led1 {
|
|
label = "ext:led1";
|
|
gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led2 {
|
|
label = "ext:led2";
|
|
gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led3 {
|
|
label = "ext:led3";
|
|
gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
vcc: vcc_fixed {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3v3io";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
adc1_pins: adc1-pins {
|
|
adc1_pins_cfg {
|
|
pins = "pf_9";
|
|
function = "adc";
|
|
input-disable;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
emc_pins: emc-pins {
|
|
emc_addr0_23_cfg {
|
|
pins = "p2_9", "p2_10", "p2_11", "p2_12",
|
|
"p2_13", "p1_0", "p1_1", "p1_2",
|
|
"p2_8", "p2_7", "p2_6", "p2_2",
|
|
"p2_1", "p2_0", "p6_8", "p6_7",
|
|
"pd_16", "pd_15", "pe_0", "pe_1",
|
|
"pe_2", "pe_3", "pe_4", "pa_4";
|
|
function = "emc";
|
|
slew-rate = <1>;
|
|
bias-disable;
|
|
input-enable;
|
|
input-schmitt-disable;
|
|
};
|
|
|
|
emc_data0_15_cfg {
|
|
pins = "p1_7", "p1_8", "p1_9", "p1_10",
|
|
"p1_11", "p1_12", "p1_13", "p1_14",
|
|
"p5_4", "p5_5", "p5_6", "p5_7",
|
|
"p5_0", "p5_1", "p5_2", "p5_3";
|
|
function = "emc";
|
|
slew-rate = <1>;
|
|
bias-disable;
|
|
input-enable;
|
|
input-schmitt-disable;
|
|
};
|
|
|
|
emc_we_oe_cfg {
|
|
pins = "p1_6", "p1_3";
|
|
function = "emc";
|
|
slew-rate = <1>;
|
|
bias-disable;
|
|
input-enable;
|
|
input-schmitt-disable;
|
|
};
|
|
|
|
emc_bls0_3_cfg {
|
|
pins = "p1_4", "p6_6", "pd_13", "pd_10";
|
|
function = "emc";
|
|
slew-rate = <1>;
|
|
bias-disable;
|
|
input-enable;
|
|
input-schmitt-disable;
|
|
};
|
|
|
|
emc_cs0_cs2_cfg {
|
|
pins = "p1_5", "pd_12";
|
|
function = "emc";
|
|
slew-rate = <1>;
|
|
bias-disable;
|
|
input-enable;
|
|
input-schmitt-disable;
|
|
};
|
|
|
|
emc_sdram_dqm0_3_cfg {
|
|
pins = "p6_12", "p6_10", "pd_0", "pe_13";
|
|
function = "emc";
|
|
slew-rate = <1>;
|
|
bias-disable;
|
|
input-enable;
|
|
input-schmitt-disable;
|
|
};
|
|
|
|
emc_sdram_ras_cas_cfg {
|
|
pins = "p6_5", "p6_4";
|
|
function = "emc";
|
|
slew-rate = <1>;
|
|
bias-disable;
|
|
input-enable;
|
|
input-schmitt-disable;
|
|
};
|
|
|
|
emc_sdram_dycs0_cfg {
|
|
pins = "p6_9";
|
|
function = "emc";
|
|
slew-rate = <1>;
|
|
bias-disable;
|
|
input-enable;
|
|
input-schmitt-disable;
|
|
};
|
|
|
|
emc_sdram_cke_cfg {
|
|
pins = "p6_11";
|
|
function = "emc";
|
|
slew-rate = <1>;
|
|
bias-disable;
|
|
input-enable;
|
|
input-schmitt-disable;
|
|
};
|
|
|
|
emc_sdram_clock_cfg {
|
|
pins = "clk0", "clk1", "clk2", "clk3";
|
|
function = "emc";
|
|
slew-rate = <1>;
|
|
bias-disable;
|
|
input-enable;
|
|
input-schmitt-disable;
|
|
};
|
|
};
|
|
|
|
enet_mii_pins: enet-mii-pins {
|
|
enet_mii_rxd0_3_cfg {
|
|
pins = "p1_15", "p0_0", "p9_3", "p9_2";
|
|
function = "enet";
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
|
|
enet_mii_txd0_3_cfg {
|
|
pins = "p1_18", "p1_20", "p9_4", "p9_5";
|
|
function = "enet";
|
|
bias-disable;
|
|
};
|
|
|
|
enet_mii_crs_col_cfg {
|
|
pins = "p9_0", "p9_6";
|
|
function = "enet";
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
|
|
enet_mii_rx_clk_dv_er_cfg {
|
|
pins = "pc_0", "p1_16", "p9_1";
|
|
function = "enet";
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
|
|
enet_mii_tx_clk_en_cfg {
|
|
pins = "p1_19", "p0_1";
|
|
function = "enet";
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
|
|
enet_mdio_cfg {
|
|
pins = "p1_17";
|
|
function = "enet";
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
|
|
enet_mdc_cfg {
|
|
pins = "pc_1";
|
|
function = "enet";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c0_pins: i2c0-pins {
|
|
i2c0_pins_cfg {
|
|
pins = "i2c0_scl", "i2c0_sda";
|
|
function = "i2c0";
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
spifi_pins: spifi-pins {
|
|
spifi_clk_cfg {
|
|
pins = "p3_3";
|
|
function = "spifi";
|
|
slew-rate = <1>;
|
|
bias-disable;
|
|
input-enable;
|
|
input-schmitt-disable;
|
|
};
|
|
|
|
spifi_mosi_miso_sio2_3_cfg {
|
|
pins = "p3_7", "p3_6", "p3_5", "p3_4";
|
|
function = "spifi";
|
|
slew-rate = <1>;
|
|
bias-disable;
|
|
input-enable;
|
|
input-schmitt-disable;
|
|
};
|
|
|
|
spifi_cs_cfg {
|
|
pins = "p3_8";
|
|
function = "spifi";
|
|
slew-rate = <1>;
|
|
bias-disable;
|
|
input-enable;
|
|
input-schmitt-disable;
|
|
};
|
|
};
|
|
|
|
uart0_pins: uart0-pins {
|
|
uart0_rx_cfg {
|
|
pins = "pf_11";
|
|
function = "uart0";
|
|
input-schmitt-disable;
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
|
|
uart0_tx_cfg {
|
|
pins = "pf_10";
|
|
function = "uart0";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|
|
|
|
&adc1 {
|
|
status = "okay";
|
|
vref-supply = <&vcc>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&adc1_pins>;
|
|
};
|
|
|
|
&emc {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emc_pins>;
|
|
|
|
cs0 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
mpmc,cs = <0>;
|
|
mpmc,memory-width = <16>;
|
|
mpmc,byte-lane-low;
|
|
mpmc,write-enable-delay = <0>;
|
|
mpmc,output-enable-delay = <0>;
|
|
mpmc,read-access-delay = <70>;
|
|
mpmc,page-mode-read-delay = <70>;
|
|
|
|
flash@0,0 {
|
|
compatible = "sst,sst39vf320", "cfi-flash";
|
|
reg = <0 0 0x400000>;
|
|
bank-width = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "bootloader";
|
|
reg = <0x000000 0x040000>; /* 256 KiB */
|
|
};
|
|
|
|
partition@1 {
|
|
label = "kernel";
|
|
reg = <0x040000 0x2C0000>; /* 2.75 MiB */
|
|
};
|
|
|
|
partition@2 {
|
|
label = "rootfs";
|
|
reg = <0x300000 0x100000>; /* 1 MiB */
|
|
};
|
|
};
|
|
};
|
|
|
|
cs2 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
mpmc,cs = <2>;
|
|
mpmc,memory-width = <16>;
|
|
mpmc,byte-lane-low;
|
|
mpmc,write-enable-delay = <0>;
|
|
mpmc,output-enable-delay = <30>;
|
|
mpmc,read-access-delay = <90>;
|
|
mpmc,page-mode-read-delay = <55>;
|
|
mpmc,write-access-delay = <55>;
|
|
mpmc,turn-round-delay = <55>;
|
|
|
|
ext_sram: sram@2,0 {
|
|
compatible = "mmio-sram";
|
|
reg = <2 0 0x80000>; /* 512 KiB SRAM on IS62WV25616 */
|
|
};
|
|
};
|
|
};
|
|
|
|
&enet_tx_clk {
|
|
clock-frequency = <25000000>;
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
clock-frequency = <400000>;
|
|
|
|
/* NXP SE97BTP with temperature sensor + eeprom */
|
|
sensor@18 {
|
|
compatible = "nxp,se97", "jedec,jc-42.4-temp";
|
|
reg = <0x18>;
|
|
};
|
|
|
|
eeprom@50 {
|
|
compatible = "nxp,24c02", "atmel,24c02";
|
|
reg = <0x50>;
|
|
};
|
|
|
|
pca_gpio: gpio@24 {
|
|
compatible = "nxp,pca9673";
|
|
reg = <0x24>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&mac {
|
|
status = "okay";
|
|
phy-mode = "mii";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&enet_mii_pins>;
|
|
};
|
|
|
|
&spifi {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spifi_pins>;
|
|
|
|
flash {
|
|
compatible = "jedec,spi-nor";
|
|
spi-rx-bus-width = <4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "bootloader";
|
|
reg = <0x000000 0x040000>; /* 256 KiB */
|
|
};
|
|
|
|
partition@1 {
|
|
label = "kernel";
|
|
reg = <0x040000 0x2c0000>; /* 2.75 MiB */
|
|
};
|
|
|
|
partition@2 {
|
|
label = "rootfs";
|
|
reg = <0x300000 0x500000>; /* 5 MiB */
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
};
|