linux_dsm_epyc7002/arch/arm/boot/dts/exynos54xx.dtsi
Arnd Bergmann 061ae53266 Merge tag 'samsung-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc
Pull "Samsung DTS ARM changes for 4.15" from Krzysztof Kozłowski:

1. Add new board: Hardkernel Odroid HC1.
2. Fix incomplete Odroid-XU3/4 thermal-zones definition leading to
   possible overheat if first pair of A7+A15 cores is idle but rest of
   CPUs are busy.
3. Add capacity-dmips-mhz properties for CPUs of octa-core SoCs.
4. Add power button to Odroid XU3/4.
5. Improvements in Gscaler, HDMI and Mixer blocks on Exynos5.
6. Add suspend quirk to DWC3 USB controller to fix enumeration of
   SuperSpeed devices on Odroid XU4.
7. Add HDMI and MHL to Trats2.
8. Cleanups (redundant properties and nodes).

* tag 'samsung-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  dt-bindings: samsung: Document binding for new Odroid HC1 board
  ARM: dts: exynos: Add HDMI and Sil9234 to Trats2 board
  ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board
  ARM: dts: exynos: Move audio clocks configuration to odroidxu3-audio.dtsi
  ARM: dts: exynos: Add dwc3 SUSPHY quirk
  ARM: dts: exynos: Add status property to Exynos 542x Mixer nodes
  ARM: dts: exynos: Add status property to Exynos 5250 HDMI and Mixer nodes
  ARM: dts: exynos: Cleanup HDMI DCC definitions on Exynos5250 and Exynos542x boards
  ARM: dts: exynos: Move HDMI PHY node from boards to exynos5250.dtsi
  ARM: dts: exynos: Use specific compatibles for proper Gscaler limits on Exynos5250 and Exynos5420
  ARM: dts: exynos: Remove redundant interrupt properties in gpio-keys on Odroid boards
  ARM: dts: exynos: Add power button for Odroid XU3/4
  ARM: dts: exynos: Remove the display-timing and delay from Rinato
  ARM: dts: exynos: add exynos5422 cpu capacity-dmips-mhz information
  ARM: dts: exynos: add exynos5420 cpu capacity-dmips-mhz information
  ARM: dts: exynos: fix incomplete Odroid-XU3/4 thermal-zones definition
2017-10-20 00:38:51 +02:00

201 lines
4.8 KiB
Plaintext

/*
* Samsung's Exynos54xx SoC series common device tree source
*
* Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* Copyright (c) 2016 Krzysztof Kozlowski
*
* Device nodes common for Samsung Exynos5410/5420/5422/5800. Specific
* Exynos 54xx SoCs should include this file and customize it further
* (e.g. with clocks).
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "exynos5.dtsi"
/ {
compatible = "samsung,exynos5";
aliases {
i2c4 = &hsi2c_4;
i2c5 = &hsi2c_5;
i2c6 = &hsi2c_6;
i2c7 = &hsi2c_7;
usbdrdphy0 = &usbdrd_phy0;
usbdrdphy1 = &usbdrd_phy1;
};
soc: soc {
sysram@2020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x54000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x02020000 0x54000>;
smp-sysram@0 {
compatible = "samsung,exynos4210-sysram";
reg = <0x0 0x1000>;
};
smp-sysram@53000 {
compatible = "samsung,exynos4210-sysram-ns";
reg = <0x53000 0x1000>;
};
};
mct: mct@101c0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101c0000 0xb00>;
interrupt-parent = <&mct_map>;
interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
<8>, <9>, <10>, <11>;
mct_map: mct-map {
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = <0 &combiner 23 3>,
<1 &combiner 23 4>,
<2 &combiner 25 2>,
<3 &combiner 25 3>,
<4 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
<5 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>,
<6 &gic 0 122 IRQ_TYPE_LEVEL_HIGH>,
<7 &gic 0 123 IRQ_TYPE_LEVEL_HIGH>,
<8 &gic 0 128 IRQ_TYPE_LEVEL_HIGH>,
<9 &gic 0 129 IRQ_TYPE_LEVEL_HIGH>,
<10 &gic 0 130 IRQ_TYPE_LEVEL_HIGH>,
<11 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>;
};
};
watchdog: watchdog@101d0000 {
compatible = "samsung,exynos5420-wdt";
reg = <0x101d0000 0x100>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
};
sss: sss@10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x300>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
};
/* i2c_0-3 are defined in exynos5.dtsi */
hsi2c_4: i2c@12ca0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12ca0000 0x1000>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
hsi2c_5: i2c@12cb0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cb0000 0x1000>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
hsi2c_6: i2c@12cc0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cc0000 0x1000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
hsi2c_7: i2c@12cd0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cd0000 0x1000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
usbdrd3_0: usb3-0 {
compatible = "samsung,exynos5250-dwusb3";
#address-cells = <1>;
#size-cells = <1>;
ranges;
usbdrd_dwc3_0: dwc3@12000000 {
compatible = "snps,dwc3";
reg = <0x12000000 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
phy-names = "usb2-phy", "usb3-phy";
snps,dis_u3_susphy_quirk;
};
};
usbdrd_phy0: phy@12100000 {
compatible = "samsung,exynos5420-usbdrd-phy";
reg = <0x12100000 0x100>;
#phy-cells = <1>;
};
usbdrd3_1: usb3-1 {
compatible = "samsung,exynos5250-dwusb3";
#address-cells = <1>;
#size-cells = <1>;
ranges;
usbdrd_dwc3_1: dwc3@12400000 {
compatible = "snps,dwc3";
reg = <0x12400000 0x10000>;
phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
phy-names = "usb2-phy", "usb3-phy";
snps,dis_u3_susphy_quirk;
};
};
usbdrd_phy1: phy@12500000 {
compatible = "samsung,exynos5420-usbdrd-phy";
reg = <0x12500000 0x100>;
#phy-cells = <1>;
};
usbhost2: usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
phys = <&usb2_phy 1>;
};
};
usbhost1: usb@12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
phys = <&usb2_phy 1>;
};
};
usb2_phy: phy@12130000 {
compatible = "samsung,exynos5250-usb2-phy";
reg = <0x12130000 0x100>;
#phy-cells = <1>;
};
};
};