linux_dsm_epyc7002/sound/soc/intel/skylake/skl-messages.c
Amadeusz Sławiński 0cc33cecb4
ASoC: Intel: Skylake: Print module type instead of id
When we are printing module params, we were actually printing module id
instead of type, but debug message was saying that number we get is type.
So print module type, as it is useful when debugging paths, but also
keep printing module id, as it is used in all other logs.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com>
Link: https://lore.kernel.org/r/20190827141712.21015-5-amadeuszx.slawinski@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-27 19:26:06 +01:00

1381 lines
34 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* skl-message.c - HDA DSP interface for FW registration, Pipe and Module
* configurations
*
* Copyright (C) 2015 Intel Corp
* Author:Rafal Redzimski <rafal.f.redzimski@intel.com>
* Jeeja KP <jeeja.kp@intel.com>
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/slab.h>
#include <linux/pci.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <uapi/sound/skl-tplg-interface.h>
#include "skl-sst-dsp.h"
#include "cnl-sst-dsp.h"
#include "skl-sst-ipc.h"
#include "skl.h"
#include "../common/sst-dsp.h"
#include "../common/sst-dsp-priv.h"
#include "skl-topology.h"
static int skl_alloc_dma_buf(struct device *dev,
struct snd_dma_buffer *dmab, size_t size)
{
return snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, dev, size, dmab);
}
static int skl_free_dma_buf(struct device *dev, struct snd_dma_buffer *dmab)
{
snd_dma_free_pages(dmab);
return 0;
}
#define SKL_ASTATE_PARAM_ID 4
void skl_dsp_set_astate_cfg(struct skl_dev *skl, u32 cnt, void *data)
{
struct skl_ipc_large_config_msg msg = {0};
msg.large_param_id = SKL_ASTATE_PARAM_ID;
msg.param_data_size = (cnt * sizeof(struct skl_astate_param) +
sizeof(cnt));
skl_ipc_set_large_config(&skl->ipc, &msg, data);
}
static int skl_dsp_setup_spib(struct device *dev, unsigned int size,
int stream_tag, int enable)
{
struct hdac_bus *bus = dev_get_drvdata(dev);
struct hdac_stream *stream = snd_hdac_get_stream(bus,
SNDRV_PCM_STREAM_PLAYBACK, stream_tag);
struct hdac_ext_stream *estream;
if (!stream)
return -EINVAL;
estream = stream_to_hdac_ext_stream(stream);
/* enable/disable SPIB for this hdac stream */
snd_hdac_ext_stream_spbcap_enable(bus, enable, stream->index);
/* set the spib value */
snd_hdac_ext_stream_set_spib(bus, estream, size);
return 0;
}
static int skl_dsp_prepare(struct device *dev, unsigned int format,
unsigned int size, struct snd_dma_buffer *dmab)
{
struct hdac_bus *bus = dev_get_drvdata(dev);
struct hdac_ext_stream *estream;
struct hdac_stream *stream;
struct snd_pcm_substream substream;
int ret;
if (!bus)
return -ENODEV;
memset(&substream, 0, sizeof(substream));
substream.stream = SNDRV_PCM_STREAM_PLAYBACK;
estream = snd_hdac_ext_stream_assign(bus, &substream,
HDAC_EXT_STREAM_TYPE_HOST);
if (!estream)
return -ENODEV;
stream = hdac_stream(estream);
/* assign decouple host dma channel */
ret = snd_hdac_dsp_prepare(stream, format, size, dmab);
if (ret < 0)
return ret;
skl_dsp_setup_spib(dev, size, stream->stream_tag, true);
return stream->stream_tag;
}
static int skl_dsp_trigger(struct device *dev, bool start, int stream_tag)
{
struct hdac_bus *bus = dev_get_drvdata(dev);
struct hdac_stream *stream;
if (!bus)
return -ENODEV;
stream = snd_hdac_get_stream(bus,
SNDRV_PCM_STREAM_PLAYBACK, stream_tag);
if (!stream)
return -EINVAL;
snd_hdac_dsp_trigger(stream, start);
return 0;
}
static int skl_dsp_cleanup(struct device *dev,
struct snd_dma_buffer *dmab, int stream_tag)
{
struct hdac_bus *bus = dev_get_drvdata(dev);
struct hdac_stream *stream;
struct hdac_ext_stream *estream;
if (!bus)
return -ENODEV;
stream = snd_hdac_get_stream(bus,
SNDRV_PCM_STREAM_PLAYBACK, stream_tag);
if (!stream)
return -EINVAL;
estream = stream_to_hdac_ext_stream(stream);
skl_dsp_setup_spib(dev, 0, stream_tag, false);
snd_hdac_ext_stream_release(estream, HDAC_EXT_STREAM_TYPE_HOST);
snd_hdac_dsp_cleanup(stream, dmab);
return 0;
}
static struct skl_dsp_loader_ops skl_get_loader_ops(void)
{
struct skl_dsp_loader_ops loader_ops;
memset(&loader_ops, 0, sizeof(struct skl_dsp_loader_ops));
loader_ops.alloc_dma_buf = skl_alloc_dma_buf;
loader_ops.free_dma_buf = skl_free_dma_buf;
return loader_ops;
};
static struct skl_dsp_loader_ops bxt_get_loader_ops(void)
{
struct skl_dsp_loader_ops loader_ops;
memset(&loader_ops, 0, sizeof(loader_ops));
loader_ops.alloc_dma_buf = skl_alloc_dma_buf;
loader_ops.free_dma_buf = skl_free_dma_buf;
loader_ops.prepare = skl_dsp_prepare;
loader_ops.trigger = skl_dsp_trigger;
loader_ops.cleanup = skl_dsp_cleanup;
return loader_ops;
};
static const struct skl_dsp_ops dsp_ops[] = {
{
.id = 0x9d70,
.num_cores = 2,
.loader_ops = skl_get_loader_ops,
.init = skl_sst_dsp_init,
.init_fw = skl_sst_init_fw,
.cleanup = skl_sst_dsp_cleanup
},
{
.id = 0x9d71,
.num_cores = 2,
.loader_ops = skl_get_loader_ops,
.init = skl_sst_dsp_init,
.init_fw = skl_sst_init_fw,
.cleanup = skl_sst_dsp_cleanup
},
{
.id = 0x5a98,
.num_cores = 2,
.loader_ops = bxt_get_loader_ops,
.init = bxt_sst_dsp_init,
.init_fw = bxt_sst_init_fw,
.cleanup = bxt_sst_dsp_cleanup
},
{
.id = 0x3198,
.num_cores = 2,
.loader_ops = bxt_get_loader_ops,
.init = bxt_sst_dsp_init,
.init_fw = bxt_sst_init_fw,
.cleanup = bxt_sst_dsp_cleanup
},
{
.id = 0x9dc8,
.num_cores = 4,
.loader_ops = bxt_get_loader_ops,
.init = cnl_sst_dsp_init,
.init_fw = cnl_sst_init_fw,
.cleanup = cnl_sst_dsp_cleanup
},
{
.id = 0xa348,
.num_cores = 4,
.loader_ops = bxt_get_loader_ops,
.init = cnl_sst_dsp_init,
.init_fw = cnl_sst_init_fw,
.cleanup = cnl_sst_dsp_cleanup
},
{
.id = 0x02c8,
.num_cores = 4,
.loader_ops = bxt_get_loader_ops,
.init = cnl_sst_dsp_init,
.init_fw = cnl_sst_init_fw,
.cleanup = cnl_sst_dsp_cleanup
},
{
.id = 0x06c8,
.num_cores = 4,
.loader_ops = bxt_get_loader_ops,
.init = cnl_sst_dsp_init,
.init_fw = cnl_sst_init_fw,
.cleanup = cnl_sst_dsp_cleanup
},
};
const struct skl_dsp_ops *skl_get_dsp_ops(int pci_id)
{
int i;
for (i = 0; i < ARRAY_SIZE(dsp_ops); i++) {
if (dsp_ops[i].id == pci_id)
return &dsp_ops[i];
}
return NULL;
}
int skl_init_dsp(struct skl_dev *skl)
{
void __iomem *mmio_base;
struct hdac_bus *bus = skl_to_bus(skl);
struct skl_dsp_loader_ops loader_ops;
int irq = bus->irq;
const struct skl_dsp_ops *ops;
struct skl_dsp_cores *cores;
int ret;
/* enable ppcap interrupt */
snd_hdac_ext_bus_ppcap_enable(bus, true);
snd_hdac_ext_bus_ppcap_int_enable(bus, true);
/* read the BAR of the ADSP MMIO */
mmio_base = pci_ioremap_bar(skl->pci, 4);
if (mmio_base == NULL) {
dev_err(bus->dev, "ioremap error\n");
return -ENXIO;
}
ops = skl_get_dsp_ops(skl->pci->device);
if (!ops) {
ret = -EIO;
goto unmap_mmio;
}
loader_ops = ops->loader_ops();
ret = ops->init(bus->dev, mmio_base, irq,
skl->fw_name, loader_ops,
&skl);
if (ret < 0)
goto unmap_mmio;
skl->dsp_ops = ops;
cores = &skl->cores;
cores->count = ops->num_cores;
cores->state = kcalloc(cores->count, sizeof(*cores->state), GFP_KERNEL);
if (!cores->state) {
ret = -ENOMEM;
goto unmap_mmio;
}
cores->usage_count = kcalloc(cores->count, sizeof(*cores->usage_count),
GFP_KERNEL);
if (!cores->usage_count) {
ret = -ENOMEM;
goto free_core_state;
}
dev_dbg(bus->dev, "dsp registration status=%d\n", ret);
return 0;
free_core_state:
kfree(cores->state);
unmap_mmio:
iounmap(mmio_base);
return ret;
}
int skl_free_dsp(struct skl_dev *skl)
{
struct hdac_bus *bus = skl_to_bus(skl);
/* disable ppcap interrupt */
snd_hdac_ext_bus_ppcap_int_enable(bus, false);
skl->dsp_ops->cleanup(bus->dev, skl);
kfree(skl->cores.state);
kfree(skl->cores.usage_count);
if (skl->dsp->addr.lpe)
iounmap(skl->dsp->addr.lpe);
return 0;
}
/*
* In the case of "suspend_active" i.e, the Audio IP being active
* during system suspend, immediately excecute any pending D0i3 work
* before suspending. This is needed for the IP to work in low power
* mode during system suspend. In the case of normal suspend, cancel
* any pending D0i3 work.
*/
int skl_suspend_late_dsp(struct skl_dev *skl)
{
struct delayed_work *dwork;
if (!skl)
return 0;
dwork = &skl->d0i3.work;
if (dwork->work.func) {
if (skl->supend_active)
flush_delayed_work(dwork);
else
cancel_delayed_work_sync(dwork);
}
return 0;
}
int skl_suspend_dsp(struct skl_dev *skl)
{
struct hdac_bus *bus = skl_to_bus(skl);
int ret;
/* if ppcap is not supported return 0 */
if (!bus->ppcap)
return 0;
ret = skl_dsp_sleep(skl->dsp);
if (ret < 0)
return ret;
/* disable ppcap interrupt */
snd_hdac_ext_bus_ppcap_int_enable(bus, false);
snd_hdac_ext_bus_ppcap_enable(bus, false);
return 0;
}
int skl_resume_dsp(struct skl_dev *skl)
{
struct hdac_bus *bus = skl_to_bus(skl);
int ret;
/* if ppcap is not supported return 0 */
if (!bus->ppcap)
return 0;
/* enable ppcap interrupt */
snd_hdac_ext_bus_ppcap_enable(bus, true);
snd_hdac_ext_bus_ppcap_int_enable(bus, true);
/* check if DSP 1st boot is done */
if (skl->is_first_boot)
return 0;
/*
* Disable dynamic clock and power gating during firmware
* and library download
*/
skl->enable_miscbdcge(skl->dev, false);
skl->clock_power_gating(skl->dev, false);
ret = skl_dsp_wake(skl->dsp);
skl->enable_miscbdcge(skl->dev, true);
skl->clock_power_gating(skl->dev, true);
if (ret < 0)
return ret;
if (skl->cfg.astate_cfg != NULL) {
skl_dsp_set_astate_cfg(skl, skl->cfg.astate_cfg->count,
skl->cfg.astate_cfg);
}
return ret;
}
enum skl_bitdepth skl_get_bit_depth(int params)
{
switch (params) {
case 8:
return SKL_DEPTH_8BIT;
case 16:
return SKL_DEPTH_16BIT;
case 24:
return SKL_DEPTH_24BIT;
case 32:
return SKL_DEPTH_32BIT;
default:
return SKL_DEPTH_INVALID;
}
}
/*
* Each module in DSP expects a base module configuration, which consists of
* PCM format information, which we calculate in driver and resource values
* which are read from widget information passed through topology binary
* This is send when we create a module with INIT_INSTANCE IPC msg
*/
static void skl_set_base_module_format(struct skl_dev *skl,
struct skl_module_cfg *mconfig,
struct skl_base_cfg *base_cfg)
{
struct skl_module *module = mconfig->module;
struct skl_module_res *res = &module->resources[mconfig->res_idx];
struct skl_module_iface *fmt = &module->formats[mconfig->fmt_idx];
struct skl_module_fmt *format = &fmt->inputs[0].fmt;
base_cfg->audio_fmt.number_of_channels = format->channels;
base_cfg->audio_fmt.s_freq = format->s_freq;
base_cfg->audio_fmt.bit_depth = format->bit_depth;
base_cfg->audio_fmt.valid_bit_depth = format->valid_bit_depth;
base_cfg->audio_fmt.ch_cfg = format->ch_cfg;
base_cfg->audio_fmt.sample_type = format->sample_type;
dev_dbg(skl->dev, "bit_depth=%x valid_bd=%x ch_config=%x\n",
format->bit_depth, format->valid_bit_depth,
format->ch_cfg);
base_cfg->audio_fmt.channel_map = format->ch_map;
base_cfg->audio_fmt.interleaving = format->interleaving_style;
base_cfg->cpc = res->cpc;
base_cfg->ibs = res->ibs;
base_cfg->obs = res->obs;
base_cfg->is_pages = res->is_pages;
}
/*
* Copies copier capabilities into copier module and updates copier module
* config size.
*/
static void skl_copy_copier_caps(struct skl_module_cfg *mconfig,
struct skl_cpr_cfg *cpr_mconfig)
{
if (mconfig->formats_config.caps_size == 0)
return;
memcpy(cpr_mconfig->gtw_cfg.config_data,
mconfig->formats_config.caps,
mconfig->formats_config.caps_size);
cpr_mconfig->gtw_cfg.config_length =
(mconfig->formats_config.caps_size) / 4;
}
#define SKL_NON_GATEWAY_CPR_NODE_ID 0xFFFFFFFF
/*
* Calculate the gatewat settings required for copier module, type of
* gateway and index of gateway to use
*/
static u32 skl_get_node_id(struct skl_dev *skl,
struct skl_module_cfg *mconfig)
{
union skl_connector_node_id node_id = {0};
union skl_ssp_dma_node ssp_node = {0};
struct skl_pipe_params *params = mconfig->pipe->p_params;
switch (mconfig->dev_type) {
case SKL_DEVICE_BT:
node_id.node.dma_type =
(SKL_CONN_SOURCE == mconfig->hw_conn_type) ?
SKL_DMA_I2S_LINK_OUTPUT_CLASS :
SKL_DMA_I2S_LINK_INPUT_CLASS;
node_id.node.vindex = params->host_dma_id +
(mconfig->vbus_id << 3);
break;
case SKL_DEVICE_I2S:
node_id.node.dma_type =
(SKL_CONN_SOURCE == mconfig->hw_conn_type) ?
SKL_DMA_I2S_LINK_OUTPUT_CLASS :
SKL_DMA_I2S_LINK_INPUT_CLASS;
ssp_node.dma_node.time_slot_index = mconfig->time_slot;
ssp_node.dma_node.i2s_instance = mconfig->vbus_id;
node_id.node.vindex = ssp_node.val;
break;
case SKL_DEVICE_DMIC:
node_id.node.dma_type = SKL_DMA_DMIC_LINK_INPUT_CLASS;
node_id.node.vindex = mconfig->vbus_id +
(mconfig->time_slot);
break;
case SKL_DEVICE_HDALINK:
node_id.node.dma_type =
(SKL_CONN_SOURCE == mconfig->hw_conn_type) ?
SKL_DMA_HDA_LINK_OUTPUT_CLASS :
SKL_DMA_HDA_LINK_INPUT_CLASS;
node_id.node.vindex = params->link_dma_id;
break;
case SKL_DEVICE_HDAHOST:
node_id.node.dma_type =
(SKL_CONN_SOURCE == mconfig->hw_conn_type) ?
SKL_DMA_HDA_HOST_OUTPUT_CLASS :
SKL_DMA_HDA_HOST_INPUT_CLASS;
node_id.node.vindex = params->host_dma_id;
break;
default:
node_id.val = 0xFFFFFFFF;
break;
}
return node_id.val;
}
static void skl_setup_cpr_gateway_cfg(struct skl_dev *skl,
struct skl_module_cfg *mconfig,
struct skl_cpr_cfg *cpr_mconfig)
{
u32 dma_io_buf;
struct skl_module_res *res;
int res_idx = mconfig->res_idx;
cpr_mconfig->gtw_cfg.node_id = skl_get_node_id(skl, mconfig);
if (cpr_mconfig->gtw_cfg.node_id == SKL_NON_GATEWAY_CPR_NODE_ID) {
cpr_mconfig->cpr_feature_mask = 0;
return;
}
if (skl->nr_modules) {
res = &mconfig->module->resources[mconfig->res_idx];
cpr_mconfig->gtw_cfg.dma_buffer_size = res->dma_buffer_size;
goto skip_buf_size_calc;
} else {
res = &mconfig->module->resources[res_idx];
}
switch (mconfig->hw_conn_type) {
case SKL_CONN_SOURCE:
if (mconfig->dev_type == SKL_DEVICE_HDAHOST)
dma_io_buf = res->ibs;
else
dma_io_buf = res->obs;
break;
case SKL_CONN_SINK:
if (mconfig->dev_type == SKL_DEVICE_HDAHOST)
dma_io_buf = res->obs;
else
dma_io_buf = res->ibs;
break;
default:
dev_warn(skl->dev, "wrong connection type: %d\n",
mconfig->hw_conn_type);
return;
}
cpr_mconfig->gtw_cfg.dma_buffer_size =
mconfig->dma_buffer_size * dma_io_buf;
/* fallback to 2ms default value */
if (!cpr_mconfig->gtw_cfg.dma_buffer_size) {
if (mconfig->hw_conn_type == SKL_CONN_SOURCE)
cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * res->obs;
else
cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * res->ibs;
}
skip_buf_size_calc:
cpr_mconfig->cpr_feature_mask = 0;
cpr_mconfig->gtw_cfg.config_length = 0;
skl_copy_copier_caps(mconfig, cpr_mconfig);
}
#define DMA_CONTROL_ID 5
#define DMA_I2S_BLOB_SIZE 21
int skl_dsp_set_dma_control(struct skl_dev *skl, u32 *caps,
u32 caps_size, u32 node_id)
{
struct skl_dma_control *dma_ctrl;
struct skl_ipc_large_config_msg msg = {0};
int err = 0;
/*
* if blob size zero, then return
*/
if (caps_size == 0)
return 0;
msg.large_param_id = DMA_CONTROL_ID;
msg.param_data_size = sizeof(struct skl_dma_control) + caps_size;
dma_ctrl = kzalloc(msg.param_data_size, GFP_KERNEL);
if (dma_ctrl == NULL)
return -ENOMEM;
dma_ctrl->node_id = node_id;
/*
* NHLT blob may contain additional configs along with i2s blob.
* firmware expects only the i2s blob size as the config_length.
* So fix to i2s blob size.
* size in dwords.
*/
dma_ctrl->config_length = DMA_I2S_BLOB_SIZE;
memcpy(dma_ctrl->config_data, caps, caps_size);
err = skl_ipc_set_large_config(&skl->ipc, &msg, (u32 *)dma_ctrl);
kfree(dma_ctrl);
return err;
}
EXPORT_SYMBOL_GPL(skl_dsp_set_dma_control);
static void skl_setup_out_format(struct skl_dev *skl,
struct skl_module_cfg *mconfig,
struct skl_audio_data_format *out_fmt)
{
struct skl_module *module = mconfig->module;
struct skl_module_iface *fmt = &module->formats[mconfig->fmt_idx];
struct skl_module_fmt *format = &fmt->outputs[0].fmt;
out_fmt->number_of_channels = (u8)format->channels;
out_fmt->s_freq = format->s_freq;
out_fmt->bit_depth = format->bit_depth;
out_fmt->valid_bit_depth = format->valid_bit_depth;
out_fmt->ch_cfg = format->ch_cfg;
out_fmt->channel_map = format->ch_map;
out_fmt->interleaving = format->interleaving_style;
out_fmt->sample_type = format->sample_type;
dev_dbg(skl->dev, "copier out format chan=%d fre=%d bitdepth=%d\n",
out_fmt->number_of_channels, format->s_freq, format->bit_depth);
}
/*
* DSP needs SRC module for frequency conversion, SRC takes base module
* configuration and the target frequency as extra parameter passed as src
* config
*/
static void skl_set_src_format(struct skl_dev *skl,
struct skl_module_cfg *mconfig,
struct skl_src_module_cfg *src_mconfig)
{
struct skl_module *module = mconfig->module;
struct skl_module_iface *iface = &module->formats[mconfig->fmt_idx];
struct skl_module_fmt *fmt = &iface->outputs[0].fmt;
skl_set_base_module_format(skl, mconfig,
(struct skl_base_cfg *)src_mconfig);
src_mconfig->src_cfg = fmt->s_freq;
}
/*
* DSP needs updown module to do channel conversion. updown module take base
* module configuration and channel configuration
* It also take coefficients and now we have defaults applied here
*/
static void skl_set_updown_mixer_format(struct skl_dev *skl,
struct skl_module_cfg *mconfig,
struct skl_up_down_mixer_cfg *mixer_mconfig)
{
struct skl_module *module = mconfig->module;
struct skl_module_iface *iface = &module->formats[mconfig->fmt_idx];
struct skl_module_fmt *fmt = &iface->outputs[0].fmt;
skl_set_base_module_format(skl, mconfig,
(struct skl_base_cfg *)mixer_mconfig);
mixer_mconfig->out_ch_cfg = fmt->ch_cfg;
mixer_mconfig->ch_map = fmt->ch_map;
}
/*
* 'copier' is DSP internal module which copies data from Host DMA (HDA host
* dma) or link (hda link, SSP, PDM)
* Here we calculate the copier module parameters, like PCM format, output
* format, gateway settings
* copier_module_config is sent as input buffer with INIT_INSTANCE IPC msg
*/
static void skl_set_copier_format(struct skl_dev *skl,
struct skl_module_cfg *mconfig,
struct skl_cpr_cfg *cpr_mconfig)
{
struct skl_audio_data_format *out_fmt = &cpr_mconfig->out_fmt;
struct skl_base_cfg *base_cfg = (struct skl_base_cfg *)cpr_mconfig;
skl_set_base_module_format(skl, mconfig, base_cfg);
skl_setup_out_format(skl, mconfig, out_fmt);
skl_setup_cpr_gateway_cfg(skl, mconfig, cpr_mconfig);
}
/*
* Algo module are DSP pre processing modules. Algo module take base module
* configuration and params
*/
static void skl_set_algo_format(struct skl_dev *skl,
struct skl_module_cfg *mconfig,
struct skl_algo_cfg *algo_mcfg)
{
struct skl_base_cfg *base_cfg = (struct skl_base_cfg *)algo_mcfg;
skl_set_base_module_format(skl, mconfig, base_cfg);
if (mconfig->formats_config.caps_size == 0)
return;
memcpy(algo_mcfg->params,
mconfig->formats_config.caps,
mconfig->formats_config.caps_size);
}
/*
* Mic select module allows selecting one or many input channels, thus
* acting as a demux.
*
* Mic select module take base module configuration and out-format
* configuration
*/
static void skl_set_base_outfmt_format(struct skl_dev *skl,
struct skl_module_cfg *mconfig,
struct skl_base_outfmt_cfg *base_outfmt_mcfg)
{
struct skl_audio_data_format *out_fmt = &base_outfmt_mcfg->out_fmt;
struct skl_base_cfg *base_cfg =
(struct skl_base_cfg *)base_outfmt_mcfg;
skl_set_base_module_format(skl, mconfig, base_cfg);
skl_setup_out_format(skl, mconfig, out_fmt);
}
static u16 skl_get_module_param_size(struct skl_dev *skl,
struct skl_module_cfg *mconfig)
{
u16 param_size;
switch (mconfig->m_type) {
case SKL_MODULE_TYPE_COPIER:
param_size = sizeof(struct skl_cpr_cfg);
param_size += mconfig->formats_config.caps_size;
return param_size;
case SKL_MODULE_TYPE_SRCINT:
return sizeof(struct skl_src_module_cfg);
case SKL_MODULE_TYPE_UPDWMIX:
return sizeof(struct skl_up_down_mixer_cfg);
case SKL_MODULE_TYPE_ALGO:
param_size = sizeof(struct skl_base_cfg);
param_size += mconfig->formats_config.caps_size;
return param_size;
case SKL_MODULE_TYPE_BASE_OUTFMT:
case SKL_MODULE_TYPE_MIC_SELECT:
case SKL_MODULE_TYPE_KPB:
return sizeof(struct skl_base_outfmt_cfg);
default:
/*
* return only base cfg when no specific module type is
* specified
*/
return sizeof(struct skl_base_cfg);
}
return 0;
}
/*
* DSP firmware supports various modules like copier, SRC, updown etc.
* These modules required various parameters to be calculated and sent for
* the module initialization to DSP. By default a generic module needs only
* base module format configuration
*/
static int skl_set_module_format(struct skl_dev *skl,
struct skl_module_cfg *module_config,
u16 *module_config_size,
void **param_data)
{
u16 param_size;
param_size = skl_get_module_param_size(skl, module_config);
*param_data = kzalloc(param_size, GFP_KERNEL);
if (NULL == *param_data)
return -ENOMEM;
*module_config_size = param_size;
switch (module_config->m_type) {
case SKL_MODULE_TYPE_COPIER:
skl_set_copier_format(skl, module_config, *param_data);
break;
case SKL_MODULE_TYPE_SRCINT:
skl_set_src_format(skl, module_config, *param_data);
break;
case SKL_MODULE_TYPE_UPDWMIX:
skl_set_updown_mixer_format(skl, module_config, *param_data);
break;
case SKL_MODULE_TYPE_ALGO:
skl_set_algo_format(skl, module_config, *param_data);
break;
case SKL_MODULE_TYPE_BASE_OUTFMT:
case SKL_MODULE_TYPE_MIC_SELECT:
case SKL_MODULE_TYPE_KPB:
skl_set_base_outfmt_format(skl, module_config, *param_data);
break;
default:
skl_set_base_module_format(skl, module_config, *param_data);
break;
}
dev_dbg(skl->dev, "Module type=%d id=%d config size: %d bytes\n",
module_config->m_type, module_config->id.module_id,
param_size);
print_hex_dump_debug("Module params:", DUMP_PREFIX_OFFSET, 8, 4,
*param_data, param_size, false);
return 0;
}
static int skl_get_queue_index(struct skl_module_pin *mpin,
struct skl_module_inst_id id, int max)
{
int i;
for (i = 0; i < max; i++) {
if (mpin[i].id.module_id == id.module_id &&
mpin[i].id.instance_id == id.instance_id)
return i;
}
return -EINVAL;
}
/*
* Allocates queue for each module.
* if dynamic, the pin_index is allocated 0 to max_pin.
* In static, the pin_index is fixed based on module_id and instance id
*/
static int skl_alloc_queue(struct skl_module_pin *mpin,
struct skl_module_cfg *tgt_cfg, int max)
{
int i;
struct skl_module_inst_id id = tgt_cfg->id;
/*
* if pin in dynamic, find first free pin
* otherwise find match module and instance id pin as topology will
* ensure a unique pin is assigned to this so no need to
* allocate/free
*/
for (i = 0; i < max; i++) {
if (mpin[i].is_dynamic) {
if (!mpin[i].in_use &&
mpin[i].pin_state == SKL_PIN_UNBIND) {
mpin[i].in_use = true;
mpin[i].id.module_id = id.module_id;
mpin[i].id.instance_id = id.instance_id;
mpin[i].id.pvt_id = id.pvt_id;
mpin[i].tgt_mcfg = tgt_cfg;
return i;
}
} else {
if (mpin[i].id.module_id == id.module_id &&
mpin[i].id.instance_id == id.instance_id &&
mpin[i].pin_state == SKL_PIN_UNBIND) {
mpin[i].tgt_mcfg = tgt_cfg;
return i;
}
}
}
return -EINVAL;
}
static void skl_free_queue(struct skl_module_pin *mpin, int q_index)
{
if (mpin[q_index].is_dynamic) {
mpin[q_index].in_use = false;
mpin[q_index].id.module_id = 0;
mpin[q_index].id.instance_id = 0;
mpin[q_index].id.pvt_id = 0;
}
mpin[q_index].pin_state = SKL_PIN_UNBIND;
mpin[q_index].tgt_mcfg = NULL;
}
/* Module state will be set to unint, if all the out pin state is UNBIND */
static void skl_clear_module_state(struct skl_module_pin *mpin, int max,
struct skl_module_cfg *mcfg)
{
int i;
bool found = false;
for (i = 0; i < max; i++) {
if (mpin[i].pin_state == SKL_PIN_UNBIND)
continue;
found = true;
break;
}
if (!found)
mcfg->m_state = SKL_MODULE_INIT_DONE;
return;
}
/*
* A module needs to be instanataited in DSP. A mdoule is present in a
* collection of module referred as a PIPE.
* We first calculate the module format, based on module type and then
* invoke the DSP by sending IPC INIT_INSTANCE using ipc helper
*/
int skl_init_module(struct skl_dev *skl,
struct skl_module_cfg *mconfig)
{
u16 module_config_size = 0;
void *param_data = NULL;
int ret;
struct skl_ipc_init_instance_msg msg;
dev_dbg(skl->dev, "%s: module_id = %d instance=%d\n", __func__,
mconfig->id.module_id, mconfig->id.pvt_id);
if (mconfig->pipe->state != SKL_PIPE_CREATED) {
dev_err(skl->dev, "Pipe not created state= %d pipe_id= %d\n",
mconfig->pipe->state, mconfig->pipe->ppl_id);
return -EIO;
}
ret = skl_set_module_format(skl, mconfig,
&module_config_size, &param_data);
if (ret < 0) {
dev_err(skl->dev, "Failed to set module format ret=%d\n", ret);
return ret;
}
msg.module_id = mconfig->id.module_id;
msg.instance_id = mconfig->id.pvt_id;
msg.ppl_instance_id = mconfig->pipe->ppl_id;
msg.param_data_size = module_config_size;
msg.core_id = mconfig->core_id;
msg.domain = mconfig->domain;
ret = skl_ipc_init_instance(&skl->ipc, &msg, param_data);
if (ret < 0) {
dev_err(skl->dev, "Failed to init instance ret=%d\n", ret);
kfree(param_data);
return ret;
}
mconfig->m_state = SKL_MODULE_INIT_DONE;
kfree(param_data);
return ret;
}
static void skl_dump_bind_info(struct skl_dev *skl, struct skl_module_cfg
*src_module, struct skl_module_cfg *dst_module)
{
dev_dbg(skl->dev, "%s: src module_id = %d src_instance=%d\n",
__func__, src_module->id.module_id, src_module->id.pvt_id);
dev_dbg(skl->dev, "%s: dst_module=%d dst_instance=%d\n", __func__,
dst_module->id.module_id, dst_module->id.pvt_id);
dev_dbg(skl->dev, "src_module state = %d dst module state = %d\n",
src_module->m_state, dst_module->m_state);
}
/*
* On module freeup, we need to unbind the module with modules
* it is already bind.
* Find the pin allocated and unbind then using bind_unbind IPC
*/
int skl_unbind_modules(struct skl_dev *skl,
struct skl_module_cfg *src_mcfg,
struct skl_module_cfg *dst_mcfg)
{
int ret;
struct skl_ipc_bind_unbind_msg msg;
struct skl_module_inst_id src_id = src_mcfg->id;
struct skl_module_inst_id dst_id = dst_mcfg->id;
int in_max = dst_mcfg->module->max_input_pins;
int out_max = src_mcfg->module->max_output_pins;
int src_index, dst_index, src_pin_state, dst_pin_state;
skl_dump_bind_info(skl, src_mcfg, dst_mcfg);
/* get src queue index */
src_index = skl_get_queue_index(src_mcfg->m_out_pin, dst_id, out_max);
if (src_index < 0)
return 0;
msg.src_queue = src_index;
/* get dst queue index */
dst_index = skl_get_queue_index(dst_mcfg->m_in_pin, src_id, in_max);
if (dst_index < 0)
return 0;
msg.dst_queue = dst_index;
src_pin_state = src_mcfg->m_out_pin[src_index].pin_state;
dst_pin_state = dst_mcfg->m_in_pin[dst_index].pin_state;
if (src_pin_state != SKL_PIN_BIND_DONE ||
dst_pin_state != SKL_PIN_BIND_DONE)
return 0;
msg.module_id = src_mcfg->id.module_id;
msg.instance_id = src_mcfg->id.pvt_id;
msg.dst_module_id = dst_mcfg->id.module_id;
msg.dst_instance_id = dst_mcfg->id.pvt_id;
msg.bind = false;
ret = skl_ipc_bind_unbind(&skl->ipc, &msg);
if (!ret) {
/* free queue only if unbind is success */
skl_free_queue(src_mcfg->m_out_pin, src_index);
skl_free_queue(dst_mcfg->m_in_pin, dst_index);
/*
* check only if src module bind state, bind is
* always from src -> sink
*/
skl_clear_module_state(src_mcfg->m_out_pin, out_max, src_mcfg);
}
return ret;
}
static void fill_pin_params(struct skl_audio_data_format *pin_fmt,
struct skl_module_fmt *format)
{
pin_fmt->number_of_channels = format->channels;
pin_fmt->s_freq = format->s_freq;
pin_fmt->bit_depth = format->bit_depth;
pin_fmt->valid_bit_depth = format->valid_bit_depth;
pin_fmt->ch_cfg = format->ch_cfg;
pin_fmt->sample_type = format->sample_type;
pin_fmt->channel_map = format->ch_map;
pin_fmt->interleaving = format->interleaving_style;
}
#define CPR_SINK_FMT_PARAM_ID 2
/*
* Once a module is instantiated it need to be 'bind' with other modules in
* the pipeline. For binding we need to find the module pins which are bind
* together
* This function finds the pins and then sends bund_unbind IPC message to
* DSP using IPC helper
*/
int skl_bind_modules(struct skl_dev *skl,
struct skl_module_cfg *src_mcfg,
struct skl_module_cfg *dst_mcfg)
{
int ret = 0;
struct skl_ipc_bind_unbind_msg msg;
int in_max = dst_mcfg->module->max_input_pins;
int out_max = src_mcfg->module->max_output_pins;
int src_index, dst_index;
struct skl_module_fmt *format;
struct skl_cpr_pin_fmt pin_fmt;
struct skl_module *module;
struct skl_module_iface *fmt;
skl_dump_bind_info(skl, src_mcfg, dst_mcfg);
if (src_mcfg->m_state < SKL_MODULE_INIT_DONE ||
dst_mcfg->m_state < SKL_MODULE_INIT_DONE)
return 0;
src_index = skl_alloc_queue(src_mcfg->m_out_pin, dst_mcfg, out_max);
if (src_index < 0)
return -EINVAL;
msg.src_queue = src_index;
dst_index = skl_alloc_queue(dst_mcfg->m_in_pin, src_mcfg, in_max);
if (dst_index < 0) {
skl_free_queue(src_mcfg->m_out_pin, src_index);
return -EINVAL;
}
/*
* Copier module requires the separate large_config_set_ipc to
* configure the pins other than 0
*/
if (src_mcfg->m_type == SKL_MODULE_TYPE_COPIER && src_index > 0) {
pin_fmt.sink_id = src_index;
module = src_mcfg->module;
fmt = &module->formats[src_mcfg->fmt_idx];
/* Input fmt is same as that of src module input cfg */
format = &fmt->inputs[0].fmt;
fill_pin_params(&(pin_fmt.src_fmt), format);
format = &fmt->outputs[src_index].fmt;
fill_pin_params(&(pin_fmt.dst_fmt), format);
ret = skl_set_module_params(skl, (void *)&pin_fmt,
sizeof(struct skl_cpr_pin_fmt),
CPR_SINK_FMT_PARAM_ID, src_mcfg);
if (ret < 0)
goto out;
}
msg.dst_queue = dst_index;
dev_dbg(skl->dev, "src queue = %d dst queue =%d\n",
msg.src_queue, msg.dst_queue);
msg.module_id = src_mcfg->id.module_id;
msg.instance_id = src_mcfg->id.pvt_id;
msg.dst_module_id = dst_mcfg->id.module_id;
msg.dst_instance_id = dst_mcfg->id.pvt_id;
msg.bind = true;
ret = skl_ipc_bind_unbind(&skl->ipc, &msg);
if (!ret) {
src_mcfg->m_state = SKL_MODULE_BIND_DONE;
src_mcfg->m_out_pin[src_index].pin_state = SKL_PIN_BIND_DONE;
dst_mcfg->m_in_pin[dst_index].pin_state = SKL_PIN_BIND_DONE;
return ret;
}
out:
/* error case , if IPC fails, clear the queue index */
skl_free_queue(src_mcfg->m_out_pin, src_index);
skl_free_queue(dst_mcfg->m_in_pin, dst_index);
return ret;
}
static int skl_set_pipe_state(struct skl_dev *skl, struct skl_pipe *pipe,
enum skl_ipc_pipeline_state state)
{
dev_dbg(skl->dev, "%s: pipe_state = %d\n", __func__, state);
return skl_ipc_set_pipeline_state(&skl->ipc, pipe->ppl_id, state);
}
/*
* A pipeline is a collection of modules. Before a module in instantiated a
* pipeline needs to be created for it.
* This function creates pipeline, by sending create pipeline IPC messages
* to FW
*/
int skl_create_pipeline(struct skl_dev *skl, struct skl_pipe *pipe)
{
int ret;
dev_dbg(skl->dev, "%s: pipe_id = %d\n", __func__, pipe->ppl_id);
ret = skl_ipc_create_pipeline(&skl->ipc, pipe->memory_pages,
pipe->pipe_priority, pipe->ppl_id,
pipe->lp_mode);
if (ret < 0) {
dev_err(skl->dev, "Failed to create pipeline\n");
return ret;
}
pipe->state = SKL_PIPE_CREATED;
return 0;
}
/*
* A pipeline needs to be deleted on cleanup. If a pipeline is running,
* then pause it first. Before actual deletion, pipeline should enter
* reset state. Finish the procedure by sending delete pipeline IPC.
* DSP will stop the DMA engines and release resources
*/
int skl_delete_pipe(struct skl_dev *skl, struct skl_pipe *pipe)
{
int ret;
dev_dbg(skl->dev, "%s: pipe = %d\n", __func__, pipe->ppl_id);
/* If pipe was not created in FW, do not try to delete it */
if (pipe->state < SKL_PIPE_CREATED)
return 0;
/* If pipe is started, do stop the pipe in FW. */
if (pipe->state >= SKL_PIPE_STARTED) {
ret = skl_set_pipe_state(skl, pipe, PPL_PAUSED);
if (ret < 0) {
dev_err(skl->dev, "Failed to stop pipeline\n");
return ret;
}
pipe->state = SKL_PIPE_PAUSED;
}
/* reset pipe state before deletion */
ret = skl_set_pipe_state(skl, pipe, PPL_RESET);
if (ret < 0) {
dev_err(skl->dev, "Failed to reset pipe ret=%d\n", ret);
return ret;
}
pipe->state = SKL_PIPE_RESET;
ret = skl_ipc_delete_pipeline(&skl->ipc, pipe->ppl_id);
if (ret < 0) {
dev_err(skl->dev, "Failed to delete pipeline\n");
return ret;
}
pipe->state = SKL_PIPE_INVALID;
return ret;
}
/*
* A pipeline is also a scheduling entity in DSP which can be run, stopped
* For processing data the pipe need to be run by sending IPC set pipe state
* to DSP
*/
int skl_run_pipe(struct skl_dev *skl, struct skl_pipe *pipe)
{
int ret;
dev_dbg(skl->dev, "%s: pipe = %d\n", __func__, pipe->ppl_id);
/* If pipe was not created in FW, do not try to pause or delete */
if (pipe->state < SKL_PIPE_CREATED)
return 0;
/* Pipe has to be paused before it is started */
ret = skl_set_pipe_state(skl, pipe, PPL_PAUSED);
if (ret < 0) {
dev_err(skl->dev, "Failed to pause pipe\n");
return ret;
}
pipe->state = SKL_PIPE_PAUSED;
ret = skl_set_pipe_state(skl, pipe, PPL_RUNNING);
if (ret < 0) {
dev_err(skl->dev, "Failed to start pipe\n");
return ret;
}
pipe->state = SKL_PIPE_STARTED;
return 0;
}
/*
* Stop the pipeline by sending set pipe state IPC
* DSP doesnt implement stop so we always send pause message
*/
int skl_stop_pipe(struct skl_dev *skl, struct skl_pipe *pipe)
{
int ret;
dev_dbg(skl->dev, "In %s pipe=%d\n", __func__, pipe->ppl_id);
/* If pipe was not created in FW, do not try to pause or delete */
if (pipe->state < SKL_PIPE_PAUSED)
return 0;
ret = skl_set_pipe_state(skl, pipe, PPL_PAUSED);
if (ret < 0) {
dev_dbg(skl->dev, "Failed to stop pipe\n");
return ret;
}
pipe->state = SKL_PIPE_PAUSED;
return 0;
}
/*
* Reset the pipeline by sending set pipe state IPC this will reset the DMA
* from the DSP side
*/
int skl_reset_pipe(struct skl_dev *skl, struct skl_pipe *pipe)
{
int ret;
/* If pipe was not created in FW, do not try to pause or delete */
if (pipe->state < SKL_PIPE_PAUSED)
return 0;
ret = skl_set_pipe_state(skl, pipe, PPL_RESET);
if (ret < 0) {
dev_dbg(skl->dev, "Failed to reset pipe ret=%d\n", ret);
return ret;
}
pipe->state = SKL_PIPE_RESET;
return 0;
}
/* Algo parameter set helper function */
int skl_set_module_params(struct skl_dev *skl, u32 *params, int size,
u32 param_id, struct skl_module_cfg *mcfg)
{
struct skl_ipc_large_config_msg msg;
msg.module_id = mcfg->id.module_id;
msg.instance_id = mcfg->id.pvt_id;
msg.param_data_size = size;
msg.large_param_id = param_id;
return skl_ipc_set_large_config(&skl->ipc, &msg, params);
}
int skl_get_module_params(struct skl_dev *skl, u32 *params, int size,
u32 param_id, struct skl_module_cfg *mcfg)
{
struct skl_ipc_large_config_msg msg;
size_t bytes = size;
msg.module_id = mcfg->id.module_id;
msg.instance_id = mcfg->id.pvt_id;
msg.param_data_size = size;
msg.large_param_id = param_id;
return skl_ipc_get_large_config(&skl->ipc, &msg, &params, &bytes);
}