mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
9f68e3655a
uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJeMm6RAAoJEAx081l5xIa+vN8P/0j4jEOv+KIinAhoH+LG3EpD m2TUuu5OQIoBrcCoWOgFBk3wqYpw6PdMBdkXh+5sE5lfeBynp8oC3Bin+QsHJE05 eGBpZtHe+70MQb0Eha+Aic0hchvBKzRnq6i0MYSIHn6afs76dLmF8knTjycxrvV5 Xu1Z3WDmjzqgWF9ja5JCD6fby11seP5RrwObYKVikO35QQyJJwGSGKgu5rq/pByK /n0PCnCOINuL0Lz6J9qexdh/0/XYFQilRC31GJNlKbDSFuECF0GOEzEE/xUBW/pI dLh2YwIIygm18Gar9PgvMwXJn3BfzQ0qEJsf+HlQeNw9iLgbHpp2AsTxHTE87OGe R/y85taW3jGjPsNOKZOeLpvg/Ro8l8ZipLApvDCG2O22DThg/cd6NDjZxl1FJfRH acDG/JdgPo5MbdRAH/cM1WuFS9gEM+0BeSQ5gCjtPakF+X4Vz+ABFDLMRJoaejkJ q8DG32TQXELQx0RMghsqK7YCWGfl+2alA1u9w6TgJh9Rq4iVckvpDeqAZnK1Adkc 87g957Tl0n6FA4wJj/t5jrceiLRMJAm/rBK+R3GZNfWrgx4bHbCmb4fZDZsrFzph nbAjNJ5kOchrFCaRR47ULby6+Q14MAFbkWq4Crfu4YDdzUkTPpep6pi2GIe8w0rV P0hdYOYJf6LUda0utuQX =oFrI -----END PGP SIGNATURE----- Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Davbe Airlie: "This is the main pull request for graphics for 5.6. Usual selection of changes all over. I've got one outstanding vmwgfx pull that touches mm so kept it separate until after all of this lands. I'll try and get it to you soon after this, but it might be early next week (nothing wrong with code, just my schedule is messy) This also hits a lot of fbdev drivers with some cleanups. Other notables: - vulkan timeline semaphore support added to syncobjs - nouveau turing secureboot/graphics support - Displayport MST display stream compression support Detailed summary: uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes" * tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits) drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing drm/nouveau/acr: return error when registering LSF if ACR not supported drm/nouveau/disp/gv100-: not all channel types support reporting error codes drm/nouveau/disp/nv50-: prevent oops when no channel method map provided drm/nouveau: support synchronous pushbuf submission drm/nouveau: signal pending fences when channel has been killed drm/nouveau: reject attempts to submit to dead channels drm/nouveau: zero vma pointer even if we only unreference it rather than free drm/nouveau: Add HD-audio component notifier support drm/nouveau: fix build error without CONFIG_IOMMU_API drm/nouveau/kms/nv04: remove set but not used variable 'width' drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector' drm/nouveau/mmu: fix comptag memory leak drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping drm/exynos: Rename Exynos to lowercase drm/exynos: change callback names drm/mst: Don't do atomic checks over disabled managers drm/amdgpu: add the lost mutex_init back drm/amd/display: skip opp blank or unblank if test pattern enabled ...
1836 lines
45 KiB
C
1836 lines
45 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Frame buffer driver for Trident TGUI, Blade and Image series
|
|
*
|
|
* Copyright 2001, 2002 - Jani Monoses <jani@iv.ro>
|
|
* Copyright 2009 Krzysztof Helt <krzysztof.h1@wp.pl>
|
|
*
|
|
* CREDITS:(in order of appearance)
|
|
* skeletonfb.c by Geert Uytterhoeven and other fb code in drivers/video
|
|
* Special thanks ;) to Mattia Crivellini <tia@mclink.it>
|
|
* much inspired by the XFree86 4.x Trident driver sources
|
|
* by Alan Hourihane the FreeVGA project
|
|
* Francesco Salvestrini <salvestrini@users.sf.net> XP support,
|
|
* code, suggestions
|
|
* TODO:
|
|
* timing value tweaking so it looks good on every monitor in every mode
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/delay.h>
|
|
#include <video/vga.h>
|
|
#include <video/trident.h>
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-algo-bit.h>
|
|
|
|
struct tridentfb_par {
|
|
void __iomem *io_virt; /* iospace virtual memory address */
|
|
u32 pseudo_pal[16];
|
|
int chip_id;
|
|
int flatpanel;
|
|
void (*init_accel) (struct tridentfb_par *, int, int);
|
|
void (*wait_engine) (struct tridentfb_par *);
|
|
void (*fill_rect)
|
|
(struct tridentfb_par *par, u32, u32, u32, u32, u32, u32);
|
|
void (*copy_rect)
|
|
(struct tridentfb_par *par, u32, u32, u32, u32, u32, u32);
|
|
void (*image_blit)
|
|
(struct tridentfb_par *par, const char*,
|
|
u32, u32, u32, u32, u32, u32);
|
|
unsigned char eng_oper; /* engine operation... */
|
|
bool ddc_registered;
|
|
struct i2c_adapter ddc_adapter;
|
|
struct i2c_algo_bit_data ddc_algo;
|
|
};
|
|
|
|
static struct fb_fix_screeninfo tridentfb_fix = {
|
|
.id = "Trident",
|
|
.type = FB_TYPE_PACKED_PIXELS,
|
|
.ypanstep = 1,
|
|
.visual = FB_VISUAL_PSEUDOCOLOR,
|
|
.accel = FB_ACCEL_NONE,
|
|
};
|
|
|
|
/* defaults which are normally overriden by user values */
|
|
|
|
/* video mode */
|
|
static char *mode_option;
|
|
static int bpp = 8;
|
|
|
|
static int noaccel;
|
|
|
|
static int center;
|
|
static int stretch;
|
|
|
|
static int fp;
|
|
static int crt;
|
|
|
|
static int memsize;
|
|
static int memdiff;
|
|
static int nativex;
|
|
|
|
module_param(mode_option, charp, 0);
|
|
MODULE_PARM_DESC(mode_option, "Initial video mode e.g. '648x480-8@60'");
|
|
module_param_named(mode, mode_option, charp, 0);
|
|
MODULE_PARM_DESC(mode, "Initial video mode e.g. '648x480-8@60' (deprecated)");
|
|
module_param(bpp, int, 0);
|
|
module_param(center, int, 0);
|
|
module_param(stretch, int, 0);
|
|
module_param(noaccel, int, 0);
|
|
module_param(memsize, int, 0);
|
|
module_param(memdiff, int, 0);
|
|
module_param(nativex, int, 0);
|
|
module_param(fp, int, 0);
|
|
MODULE_PARM_DESC(fp, "Define if flatpanel is connected");
|
|
module_param(crt, int, 0);
|
|
MODULE_PARM_DESC(crt, "Define if CRT is connected");
|
|
|
|
static inline int is_oldclock(int id)
|
|
{
|
|
return (id == TGUI9440) ||
|
|
(id == TGUI9660) ||
|
|
(id == CYBER9320);
|
|
}
|
|
|
|
static inline int is_oldprotect(int id)
|
|
{
|
|
return is_oldclock(id) ||
|
|
(id == PROVIDIA9685) ||
|
|
(id == CYBER9382) ||
|
|
(id == CYBER9385);
|
|
}
|
|
|
|
static inline int is_blade(int id)
|
|
{
|
|
return (id == BLADE3D) ||
|
|
(id == CYBERBLADEE4) ||
|
|
(id == CYBERBLADEi7) ||
|
|
(id == CYBERBLADEi7D) ||
|
|
(id == CYBERBLADEi1) ||
|
|
(id == CYBERBLADEi1D) ||
|
|
(id == CYBERBLADEAi1) ||
|
|
(id == CYBERBLADEAi1D);
|
|
}
|
|
|
|
static inline int is_xp(int id)
|
|
{
|
|
return (id == CYBERBLADEXPAi1) ||
|
|
(id == CYBERBLADEXPm8) ||
|
|
(id == CYBERBLADEXPm16);
|
|
}
|
|
|
|
static inline int is3Dchip(int id)
|
|
{
|
|
return is_blade(id) || is_xp(id) ||
|
|
(id == CYBER9397) || (id == CYBER9397DVD) ||
|
|
(id == CYBER9520) || (id == CYBER9525DVD) ||
|
|
(id == IMAGE975) || (id == IMAGE985);
|
|
}
|
|
|
|
static inline int iscyber(int id)
|
|
{
|
|
switch (id) {
|
|
case CYBER9388:
|
|
case CYBER9382:
|
|
case CYBER9385:
|
|
case CYBER9397:
|
|
case CYBER9397DVD:
|
|
case CYBER9520:
|
|
case CYBER9525DVD:
|
|
case CYBERBLADEE4:
|
|
case CYBERBLADEi7D:
|
|
case CYBERBLADEi1:
|
|
case CYBERBLADEi1D:
|
|
case CYBERBLADEAi1:
|
|
case CYBERBLADEAi1D:
|
|
case CYBERBLADEXPAi1:
|
|
return 1;
|
|
|
|
case CYBER9320:
|
|
case CYBERBLADEi7: /* VIA MPV4 integrated version */
|
|
default:
|
|
/* case CYBERBLDAEXPm8: Strange */
|
|
/* case CYBERBLDAEXPm16: Strange */
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static inline void t_outb(struct tridentfb_par *p, u8 val, u16 reg)
|
|
{
|
|
fb_writeb(val, p->io_virt + reg);
|
|
}
|
|
|
|
static inline u8 t_inb(struct tridentfb_par *p, u16 reg)
|
|
{
|
|
return fb_readb(p->io_virt + reg);
|
|
}
|
|
|
|
static inline void writemmr(struct tridentfb_par *par, u16 r, u32 v)
|
|
{
|
|
fb_writel(v, par->io_virt + r);
|
|
}
|
|
|
|
static inline u32 readmmr(struct tridentfb_par *par, u16 r)
|
|
{
|
|
return fb_readl(par->io_virt + r);
|
|
}
|
|
|
|
#define DDC_SDA_TGUI BIT(0)
|
|
#define DDC_SCL_TGUI BIT(1)
|
|
#define DDC_SCL_DRIVE_TGUI BIT(2)
|
|
#define DDC_SDA_DRIVE_TGUI BIT(3)
|
|
#define DDC_MASK_TGUI (DDC_SCL_DRIVE_TGUI | DDC_SDA_DRIVE_TGUI)
|
|
|
|
static void tridentfb_ddc_setscl_tgui(void *data, int val)
|
|
{
|
|
struct tridentfb_par *par = data;
|
|
u8 reg = vga_mm_rcrt(par->io_virt, I2C) & DDC_MASK_TGUI;
|
|
|
|
if (val)
|
|
reg &= ~DDC_SCL_DRIVE_TGUI; /* disable drive - don't drive hi */
|
|
else
|
|
reg |= DDC_SCL_DRIVE_TGUI; /* drive low */
|
|
|
|
vga_mm_wcrt(par->io_virt, I2C, reg);
|
|
}
|
|
|
|
static void tridentfb_ddc_setsda_tgui(void *data, int val)
|
|
{
|
|
struct tridentfb_par *par = data;
|
|
u8 reg = vga_mm_rcrt(par->io_virt, I2C) & DDC_MASK_TGUI;
|
|
|
|
if (val)
|
|
reg &= ~DDC_SDA_DRIVE_TGUI; /* disable drive - don't drive hi */
|
|
else
|
|
reg |= DDC_SDA_DRIVE_TGUI; /* drive low */
|
|
|
|
vga_mm_wcrt(par->io_virt, I2C, reg);
|
|
}
|
|
|
|
static int tridentfb_ddc_getsda_tgui(void *data)
|
|
{
|
|
struct tridentfb_par *par = data;
|
|
|
|
return !!(vga_mm_rcrt(par->io_virt, I2C) & DDC_SDA_TGUI);
|
|
}
|
|
|
|
#define DDC_SDA_IN BIT(0)
|
|
#define DDC_SCL_OUT BIT(1)
|
|
#define DDC_SDA_OUT BIT(3)
|
|
#define DDC_SCL_IN BIT(6)
|
|
#define DDC_MASK (DDC_SCL_OUT | DDC_SDA_OUT)
|
|
|
|
static void tridentfb_ddc_setscl(void *data, int val)
|
|
{
|
|
struct tridentfb_par *par = data;
|
|
unsigned char reg;
|
|
|
|
reg = vga_mm_rcrt(par->io_virt, I2C) & DDC_MASK;
|
|
if (val)
|
|
reg |= DDC_SCL_OUT;
|
|
else
|
|
reg &= ~DDC_SCL_OUT;
|
|
vga_mm_wcrt(par->io_virt, I2C, reg);
|
|
}
|
|
|
|
static void tridentfb_ddc_setsda(void *data, int val)
|
|
{
|
|
struct tridentfb_par *par = data;
|
|
unsigned char reg;
|
|
|
|
reg = vga_mm_rcrt(par->io_virt, I2C) & DDC_MASK;
|
|
if (!val)
|
|
reg |= DDC_SDA_OUT;
|
|
else
|
|
reg &= ~DDC_SDA_OUT;
|
|
vga_mm_wcrt(par->io_virt, I2C, reg);
|
|
}
|
|
|
|
static int tridentfb_ddc_getscl(void *data)
|
|
{
|
|
struct tridentfb_par *par = data;
|
|
|
|
return !!(vga_mm_rcrt(par->io_virt, I2C) & DDC_SCL_IN);
|
|
}
|
|
|
|
static int tridentfb_ddc_getsda(void *data)
|
|
{
|
|
struct tridentfb_par *par = data;
|
|
|
|
return !!(vga_mm_rcrt(par->io_virt, I2C) & DDC_SDA_IN);
|
|
}
|
|
|
|
static int tridentfb_setup_ddc_bus(struct fb_info *info)
|
|
{
|
|
struct tridentfb_par *par = info->par;
|
|
|
|
strlcpy(par->ddc_adapter.name, info->fix.id,
|
|
sizeof(par->ddc_adapter.name));
|
|
par->ddc_adapter.owner = THIS_MODULE;
|
|
par->ddc_adapter.class = I2C_CLASS_DDC;
|
|
par->ddc_adapter.algo_data = &par->ddc_algo;
|
|
par->ddc_adapter.dev.parent = info->device;
|
|
if (is_oldclock(par->chip_id)) { /* not sure if this check is OK */
|
|
par->ddc_algo.setsda = tridentfb_ddc_setsda_tgui;
|
|
par->ddc_algo.setscl = tridentfb_ddc_setscl_tgui;
|
|
par->ddc_algo.getsda = tridentfb_ddc_getsda_tgui;
|
|
/* no getscl */
|
|
} else {
|
|
par->ddc_algo.setsda = tridentfb_ddc_setsda;
|
|
par->ddc_algo.setscl = tridentfb_ddc_setscl;
|
|
par->ddc_algo.getsda = tridentfb_ddc_getsda;
|
|
par->ddc_algo.getscl = tridentfb_ddc_getscl;
|
|
}
|
|
par->ddc_algo.udelay = 10;
|
|
par->ddc_algo.timeout = 20;
|
|
par->ddc_algo.data = par;
|
|
|
|
i2c_set_adapdata(&par->ddc_adapter, par);
|
|
|
|
return i2c_bit_add_bus(&par->ddc_adapter);
|
|
}
|
|
|
|
/*
|
|
* Blade specific acceleration.
|
|
*/
|
|
|
|
#define point(x, y) ((y) << 16 | (x))
|
|
|
|
static void blade_init_accel(struct tridentfb_par *par, int pitch, int bpp)
|
|
{
|
|
int v1 = (pitch >> 3) << 20;
|
|
int tmp = bpp == 24 ? 2 : (bpp >> 4);
|
|
int v2 = v1 | (tmp << 29);
|
|
|
|
writemmr(par, 0x21C0, v2);
|
|
writemmr(par, 0x21C4, v2);
|
|
writemmr(par, 0x21B8, v2);
|
|
writemmr(par, 0x21BC, v2);
|
|
writemmr(par, 0x21D0, v1);
|
|
writemmr(par, 0x21D4, v1);
|
|
writemmr(par, 0x21C8, v1);
|
|
writemmr(par, 0x21CC, v1);
|
|
writemmr(par, 0x216C, 0);
|
|
}
|
|
|
|
static void blade_wait_engine(struct tridentfb_par *par)
|
|
{
|
|
while (readmmr(par, STATUS) & 0xFA800000)
|
|
cpu_relax();
|
|
}
|
|
|
|
static void blade_fill_rect(struct tridentfb_par *par,
|
|
u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
|
|
{
|
|
writemmr(par, COLOR, c);
|
|
writemmr(par, ROP, rop ? ROP_X : ROP_S);
|
|
writemmr(par, CMD, 0x20000000 | 1 << 19 | 1 << 4 | 2 << 2);
|
|
|
|
writemmr(par, DST1, point(x, y));
|
|
writemmr(par, DST2, point(x + w - 1, y + h - 1));
|
|
}
|
|
|
|
static void blade_image_blit(struct tridentfb_par *par, const char *data,
|
|
u32 x, u32 y, u32 w, u32 h, u32 c, u32 b)
|
|
{
|
|
unsigned size = ((w + 31) >> 5) * h;
|
|
|
|
writemmr(par, COLOR, c);
|
|
writemmr(par, BGCOLOR, b);
|
|
writemmr(par, CMD, 0xa0000000 | 3 << 19);
|
|
|
|
writemmr(par, DST1, point(x, y));
|
|
writemmr(par, DST2, point(x + w - 1, y + h - 1));
|
|
|
|
iowrite32_rep(par->io_virt + 0x10000, data, size);
|
|
}
|
|
|
|
static void blade_copy_rect(struct tridentfb_par *par,
|
|
u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
|
|
{
|
|
int direction = 2;
|
|
u32 s1 = point(x1, y1);
|
|
u32 s2 = point(x1 + w - 1, y1 + h - 1);
|
|
u32 d1 = point(x2, y2);
|
|
u32 d2 = point(x2 + w - 1, y2 + h - 1);
|
|
|
|
if ((y1 > y2) || ((y1 == y2) && (x1 > x2)))
|
|
direction = 0;
|
|
|
|
writemmr(par, ROP, ROP_S);
|
|
writemmr(par, CMD, 0xE0000000 | 1 << 19 | 1 << 4 | 1 << 2 | direction);
|
|
|
|
writemmr(par, SRC1, direction ? s2 : s1);
|
|
writemmr(par, SRC2, direction ? s1 : s2);
|
|
writemmr(par, DST1, direction ? d2 : d1);
|
|
writemmr(par, DST2, direction ? d1 : d2);
|
|
}
|
|
|
|
/*
|
|
* BladeXP specific acceleration functions
|
|
*/
|
|
|
|
static void xp_init_accel(struct tridentfb_par *par, int pitch, int bpp)
|
|
{
|
|
unsigned char x = bpp == 24 ? 3 : (bpp >> 4);
|
|
int v1 = pitch << (bpp == 24 ? 20 : (18 + x));
|
|
|
|
switch (pitch << (bpp >> 3)) {
|
|
case 8192:
|
|
case 512:
|
|
x |= 0x00;
|
|
break;
|
|
case 1024:
|
|
x |= 0x04;
|
|
break;
|
|
case 2048:
|
|
x |= 0x08;
|
|
break;
|
|
case 4096:
|
|
x |= 0x0C;
|
|
break;
|
|
}
|
|
|
|
t_outb(par, x, 0x2125);
|
|
|
|
par->eng_oper = x | 0x40;
|
|
|
|
writemmr(par, 0x2154, v1);
|
|
writemmr(par, 0x2150, v1);
|
|
t_outb(par, 3, 0x2126);
|
|
}
|
|
|
|
static void xp_wait_engine(struct tridentfb_par *par)
|
|
{
|
|
int count = 0;
|
|
int timeout = 0;
|
|
|
|
while (t_inb(par, STATUS) & 0x80) {
|
|
count++;
|
|
if (count == 10000000) {
|
|
/* Timeout */
|
|
count = 9990000;
|
|
timeout++;
|
|
if (timeout == 8) {
|
|
/* Reset engine */
|
|
t_outb(par, 0x00, STATUS);
|
|
return;
|
|
}
|
|
}
|
|
cpu_relax();
|
|
}
|
|
}
|
|
|
|
static void xp_fill_rect(struct tridentfb_par *par,
|
|
u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
|
|
{
|
|
writemmr(par, 0x2127, ROP_P);
|
|
writemmr(par, 0x2158, c);
|
|
writemmr(par, DRAWFL, 0x4000);
|
|
writemmr(par, OLDDIM, point(h, w));
|
|
writemmr(par, OLDDST, point(y, x));
|
|
t_outb(par, 0x01, OLDCMD);
|
|
t_outb(par, par->eng_oper, 0x2125);
|
|
}
|
|
|
|
static void xp_copy_rect(struct tridentfb_par *par,
|
|
u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
|
|
{
|
|
u32 x1_tmp, x2_tmp, y1_tmp, y2_tmp;
|
|
int direction = 0x0004;
|
|
|
|
if ((x1 < x2) && (y1 == y2)) {
|
|
direction |= 0x0200;
|
|
x1_tmp = x1 + w - 1;
|
|
x2_tmp = x2 + w - 1;
|
|
} else {
|
|
x1_tmp = x1;
|
|
x2_tmp = x2;
|
|
}
|
|
|
|
if (y1 < y2) {
|
|
direction |= 0x0100;
|
|
y1_tmp = y1 + h - 1;
|
|
y2_tmp = y2 + h - 1;
|
|
} else {
|
|
y1_tmp = y1;
|
|
y2_tmp = y2;
|
|
}
|
|
|
|
writemmr(par, DRAWFL, direction);
|
|
t_outb(par, ROP_S, 0x2127);
|
|
writemmr(par, OLDSRC, point(y1_tmp, x1_tmp));
|
|
writemmr(par, OLDDST, point(y2_tmp, x2_tmp));
|
|
writemmr(par, OLDDIM, point(h, w));
|
|
t_outb(par, 0x01, OLDCMD);
|
|
}
|
|
|
|
/*
|
|
* Image specific acceleration functions
|
|
*/
|
|
static void image_init_accel(struct tridentfb_par *par, int pitch, int bpp)
|
|
{
|
|
int tmp = bpp == 24 ? 2: (bpp >> 4);
|
|
|
|
writemmr(par, 0x2120, 0xF0000000);
|
|
writemmr(par, 0x2120, 0x40000000 | tmp);
|
|
writemmr(par, 0x2120, 0x80000000);
|
|
writemmr(par, 0x2144, 0x00000000);
|
|
writemmr(par, 0x2148, 0x00000000);
|
|
writemmr(par, 0x2150, 0x00000000);
|
|
writemmr(par, 0x2154, 0x00000000);
|
|
writemmr(par, 0x2120, 0x60000000 | (pitch << 16) | pitch);
|
|
writemmr(par, 0x216C, 0x00000000);
|
|
writemmr(par, 0x2170, 0x00000000);
|
|
writemmr(par, 0x217C, 0x00000000);
|
|
writemmr(par, 0x2120, 0x10000000);
|
|
writemmr(par, 0x2130, (2047 << 16) | 2047);
|
|
}
|
|
|
|
static void image_wait_engine(struct tridentfb_par *par)
|
|
{
|
|
while (readmmr(par, 0x2164) & 0xF0000000)
|
|
cpu_relax();
|
|
}
|
|
|
|
static void image_fill_rect(struct tridentfb_par *par,
|
|
u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
|
|
{
|
|
writemmr(par, 0x2120, 0x80000000);
|
|
writemmr(par, 0x2120, 0x90000000 | ROP_S);
|
|
|
|
writemmr(par, 0x2144, c);
|
|
|
|
writemmr(par, DST1, point(x, y));
|
|
writemmr(par, DST2, point(x + w - 1, y + h - 1));
|
|
|
|
writemmr(par, 0x2124, 0x80000000 | 3 << 22 | 1 << 10 | 1 << 9);
|
|
}
|
|
|
|
static void image_copy_rect(struct tridentfb_par *par,
|
|
u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
|
|
{
|
|
int direction = 0x4;
|
|
u32 s1 = point(x1, y1);
|
|
u32 s2 = point(x1 + w - 1, y1 + h - 1);
|
|
u32 d1 = point(x2, y2);
|
|
u32 d2 = point(x2 + w - 1, y2 + h - 1);
|
|
|
|
if ((y1 > y2) || ((y1 == y2) && (x1 > x2)))
|
|
direction = 0;
|
|
|
|
writemmr(par, 0x2120, 0x80000000);
|
|
writemmr(par, 0x2120, 0x90000000 | ROP_S);
|
|
|
|
writemmr(par, SRC1, direction ? s2 : s1);
|
|
writemmr(par, SRC2, direction ? s1 : s2);
|
|
writemmr(par, DST1, direction ? d2 : d1);
|
|
writemmr(par, DST2, direction ? d1 : d2);
|
|
writemmr(par, 0x2124,
|
|
0x80000000 | 1 << 22 | 1 << 10 | 1 << 7 | direction);
|
|
}
|
|
|
|
/*
|
|
* TGUI 9440/96XX acceleration
|
|
*/
|
|
|
|
static void tgui_init_accel(struct tridentfb_par *par, int pitch, int bpp)
|
|
{
|
|
unsigned char x = bpp == 24 ? 3 : (bpp >> 4);
|
|
|
|
/* disable clipping */
|
|
writemmr(par, 0x2148, 0);
|
|
writemmr(par, 0x214C, point(4095, 2047));
|
|
|
|
switch ((pitch * bpp) / 8) {
|
|
case 8192:
|
|
case 512:
|
|
x |= 0x00;
|
|
break;
|
|
case 1024:
|
|
x |= 0x04;
|
|
break;
|
|
case 2048:
|
|
x |= 0x08;
|
|
break;
|
|
case 4096:
|
|
x |= 0x0C;
|
|
break;
|
|
}
|
|
|
|
fb_writew(x, par->io_virt + 0x2122);
|
|
}
|
|
|
|
static void tgui_fill_rect(struct tridentfb_par *par,
|
|
u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
|
|
{
|
|
t_outb(par, ROP_P, 0x2127);
|
|
writemmr(par, OLDCLR, c);
|
|
writemmr(par, DRAWFL, 0x4020);
|
|
writemmr(par, OLDDIM, point(w - 1, h - 1));
|
|
writemmr(par, OLDDST, point(x, y));
|
|
t_outb(par, 1, OLDCMD);
|
|
}
|
|
|
|
static void tgui_copy_rect(struct tridentfb_par *par,
|
|
u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
|
|
{
|
|
int flags = 0;
|
|
u16 x1_tmp, x2_tmp, y1_tmp, y2_tmp;
|
|
|
|
if ((x1 < x2) && (y1 == y2)) {
|
|
flags |= 0x0200;
|
|
x1_tmp = x1 + w - 1;
|
|
x2_tmp = x2 + w - 1;
|
|
} else {
|
|
x1_tmp = x1;
|
|
x2_tmp = x2;
|
|
}
|
|
|
|
if (y1 < y2) {
|
|
flags |= 0x0100;
|
|
y1_tmp = y1 + h - 1;
|
|
y2_tmp = y2 + h - 1;
|
|
} else {
|
|
y1_tmp = y1;
|
|
y2_tmp = y2;
|
|
}
|
|
|
|
writemmr(par, DRAWFL, 0x4 | flags);
|
|
t_outb(par, ROP_S, 0x2127);
|
|
writemmr(par, OLDSRC, point(x1_tmp, y1_tmp));
|
|
writemmr(par, OLDDST, point(x2_tmp, y2_tmp));
|
|
writemmr(par, OLDDIM, point(w - 1, h - 1));
|
|
t_outb(par, 1, OLDCMD);
|
|
}
|
|
|
|
/*
|
|
* Accel functions called by the upper layers
|
|
*/
|
|
static void tridentfb_fillrect(struct fb_info *info,
|
|
const struct fb_fillrect *fr)
|
|
{
|
|
struct tridentfb_par *par = info->par;
|
|
int col;
|
|
|
|
if (info->flags & FBINFO_HWACCEL_DISABLED) {
|
|
cfb_fillrect(info, fr);
|
|
return;
|
|
}
|
|
if (info->var.bits_per_pixel == 8) {
|
|
col = fr->color;
|
|
col |= col << 8;
|
|
col |= col << 16;
|
|
} else
|
|
col = ((u32 *)(info->pseudo_palette))[fr->color];
|
|
|
|
par->wait_engine(par);
|
|
par->fill_rect(par, fr->dx, fr->dy, fr->width,
|
|
fr->height, col, fr->rop);
|
|
}
|
|
|
|
static void tridentfb_imageblit(struct fb_info *info,
|
|
const struct fb_image *img)
|
|
{
|
|
struct tridentfb_par *par = info->par;
|
|
int col, bgcol;
|
|
|
|
if ((info->flags & FBINFO_HWACCEL_DISABLED) || img->depth != 1) {
|
|
cfb_imageblit(info, img);
|
|
return;
|
|
}
|
|
if (info->var.bits_per_pixel == 8) {
|
|
col = img->fg_color;
|
|
col |= col << 8;
|
|
col |= col << 16;
|
|
bgcol = img->bg_color;
|
|
bgcol |= bgcol << 8;
|
|
bgcol |= bgcol << 16;
|
|
} else {
|
|
col = ((u32 *)(info->pseudo_palette))[img->fg_color];
|
|
bgcol = ((u32 *)(info->pseudo_palette))[img->bg_color];
|
|
}
|
|
|
|
par->wait_engine(par);
|
|
if (par->image_blit)
|
|
par->image_blit(par, img->data, img->dx, img->dy,
|
|
img->width, img->height, col, bgcol);
|
|
else
|
|
cfb_imageblit(info, img);
|
|
}
|
|
|
|
static void tridentfb_copyarea(struct fb_info *info,
|
|
const struct fb_copyarea *ca)
|
|
{
|
|
struct tridentfb_par *par = info->par;
|
|
|
|
if (info->flags & FBINFO_HWACCEL_DISABLED) {
|
|
cfb_copyarea(info, ca);
|
|
return;
|
|
}
|
|
par->wait_engine(par);
|
|
par->copy_rect(par, ca->sx, ca->sy, ca->dx, ca->dy,
|
|
ca->width, ca->height);
|
|
}
|
|
|
|
static int tridentfb_sync(struct fb_info *info)
|
|
{
|
|
struct tridentfb_par *par = info->par;
|
|
|
|
if (!(info->flags & FBINFO_HWACCEL_DISABLED))
|
|
par->wait_engine(par);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Hardware access functions
|
|
*/
|
|
|
|
static inline unsigned char read3X4(struct tridentfb_par *par, int reg)
|
|
{
|
|
return vga_mm_rcrt(par->io_virt, reg);
|
|
}
|
|
|
|
static inline void write3X4(struct tridentfb_par *par, int reg,
|
|
unsigned char val)
|
|
{
|
|
vga_mm_wcrt(par->io_virt, reg, val);
|
|
}
|
|
|
|
static inline unsigned char read3CE(struct tridentfb_par *par,
|
|
unsigned char reg)
|
|
{
|
|
return vga_mm_rgfx(par->io_virt, reg);
|
|
}
|
|
|
|
static inline void writeAttr(struct tridentfb_par *par, int reg,
|
|
unsigned char val)
|
|
{
|
|
fb_readb(par->io_virt + VGA_IS1_RC); /* flip-flop to index */
|
|
vga_mm_wattr(par->io_virt, reg, val);
|
|
}
|
|
|
|
static inline void write3CE(struct tridentfb_par *par, int reg,
|
|
unsigned char val)
|
|
{
|
|
vga_mm_wgfx(par->io_virt, reg, val);
|
|
}
|
|
|
|
static void enable_mmio(struct tridentfb_par *par)
|
|
{
|
|
/* Goto New Mode */
|
|
vga_io_rseq(0x0B);
|
|
|
|
/* Unprotect registers */
|
|
vga_io_wseq(NewMode1, 0x80);
|
|
if (!is_oldprotect(par->chip_id))
|
|
vga_io_wseq(Protection, 0x92);
|
|
|
|
/* Enable MMIO */
|
|
outb(PCIReg, 0x3D4);
|
|
outb(inb(0x3D5) | 0x01, 0x3D5);
|
|
}
|
|
|
|
static void disable_mmio(struct tridentfb_par *par)
|
|
{
|
|
/* Goto New Mode */
|
|
vga_mm_rseq(par->io_virt, 0x0B);
|
|
|
|
/* Unprotect registers */
|
|
vga_mm_wseq(par->io_virt, NewMode1, 0x80);
|
|
if (!is_oldprotect(par->chip_id))
|
|
vga_mm_wseq(par->io_virt, Protection, 0x92);
|
|
|
|
/* Disable MMIO */
|
|
t_outb(par, PCIReg, 0x3D4);
|
|
t_outb(par, t_inb(par, 0x3D5) & ~0x01, 0x3D5);
|
|
}
|
|
|
|
static inline void crtc_unlock(struct tridentfb_par *par)
|
|
{
|
|
write3X4(par, VGA_CRTC_V_SYNC_END,
|
|
read3X4(par, VGA_CRTC_V_SYNC_END) & 0x7F);
|
|
}
|
|
|
|
/* Return flat panel's maximum x resolution */
|
|
static int get_nativex(struct tridentfb_par *par)
|
|
{
|
|
int x, y, tmp;
|
|
|
|
if (nativex)
|
|
return nativex;
|
|
|
|
tmp = (read3CE(par, VertStretch) >> 4) & 3;
|
|
|
|
switch (tmp) {
|
|
case 0:
|
|
x = 1280; y = 1024;
|
|
break;
|
|
case 2:
|
|
x = 1024; y = 768;
|
|
break;
|
|
case 3:
|
|
x = 800; y = 600;
|
|
break;
|
|
case 1:
|
|
default:
|
|
x = 640; y = 480;
|
|
break;
|
|
}
|
|
|
|
output("%dx%d flat panel found\n", x, y);
|
|
return x;
|
|
}
|
|
|
|
/* Set pitch */
|
|
static inline void set_lwidth(struct tridentfb_par *par, int width)
|
|
{
|
|
write3X4(par, VGA_CRTC_OFFSET, width & 0xFF);
|
|
/* chips older than TGUI9660 have only 1 width bit in AddColReg */
|
|
/* touching the other one breaks I2C/DDC */
|
|
if (par->chip_id == TGUI9440 || par->chip_id == CYBER9320)
|
|
write3X4(par, AddColReg,
|
|
(read3X4(par, AddColReg) & 0xEF) | ((width & 0x100) >> 4));
|
|
else
|
|
write3X4(par, AddColReg,
|
|
(read3X4(par, AddColReg) & 0xCF) | ((width & 0x300) >> 4));
|
|
}
|
|
|
|
/* For resolutions smaller than FP resolution stretch */
|
|
static void screen_stretch(struct tridentfb_par *par)
|
|
{
|
|
if (par->chip_id != CYBERBLADEXPAi1)
|
|
write3CE(par, BiosReg, 0);
|
|
else
|
|
write3CE(par, BiosReg, 8);
|
|
write3CE(par, VertStretch, (read3CE(par, VertStretch) & 0x7C) | 1);
|
|
write3CE(par, HorStretch, (read3CE(par, HorStretch) & 0x7C) | 1);
|
|
}
|
|
|
|
/* For resolutions smaller than FP resolution center */
|
|
static inline void screen_center(struct tridentfb_par *par)
|
|
{
|
|
write3CE(par, VertStretch, (read3CE(par, VertStretch) & 0x7C) | 0x80);
|
|
write3CE(par, HorStretch, (read3CE(par, HorStretch) & 0x7C) | 0x80);
|
|
}
|
|
|
|
/* Address of first shown pixel in display memory */
|
|
static void set_screen_start(struct tridentfb_par *par, int base)
|
|
{
|
|
u8 tmp;
|
|
write3X4(par, VGA_CRTC_START_LO, base & 0xFF);
|
|
write3X4(par, VGA_CRTC_START_HI, (base & 0xFF00) >> 8);
|
|
tmp = read3X4(par, CRTCModuleTest) & 0xDF;
|
|
write3X4(par, CRTCModuleTest, tmp | ((base & 0x10000) >> 11));
|
|
tmp = read3X4(par, CRTHiOrd) & 0xF8;
|
|
write3X4(par, CRTHiOrd, tmp | ((base & 0xE0000) >> 17));
|
|
}
|
|
|
|
/* Set dotclock frequency */
|
|
static void set_vclk(struct tridentfb_par *par, unsigned long freq)
|
|
{
|
|
int m, n, k;
|
|
unsigned long fi, d, di;
|
|
unsigned char best_m = 0, best_n = 0, best_k = 0;
|
|
unsigned char hi, lo;
|
|
unsigned char shift = !is_oldclock(par->chip_id) ? 2 : 1;
|
|
|
|
d = 20000;
|
|
for (k = shift; k >= 0; k--)
|
|
for (m = 1; m < 32; m++) {
|
|
n = ((m + 2) << shift) - 8;
|
|
for (n = (n < 0 ? 0 : n); n < 122; n++) {
|
|
fi = ((14318l * (n + 8)) / (m + 2)) >> k;
|
|
di = abs(fi - freq);
|
|
if (di < d || (di == d && k == best_k)) {
|
|
d = di;
|
|
best_n = n;
|
|
best_m = m;
|
|
best_k = k;
|
|
}
|
|
if (fi > freq)
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (is_oldclock(par->chip_id)) {
|
|
lo = best_n | (best_m << 7);
|
|
hi = (best_m >> 1) | (best_k << 4);
|
|
} else {
|
|
lo = best_n;
|
|
hi = best_m | (best_k << 6);
|
|
}
|
|
|
|
if (is3Dchip(par->chip_id)) {
|
|
vga_mm_wseq(par->io_virt, ClockHigh, hi);
|
|
vga_mm_wseq(par->io_virt, ClockLow, lo);
|
|
} else {
|
|
t_outb(par, lo, 0x43C8);
|
|
t_outb(par, hi, 0x43C9);
|
|
}
|
|
debug("VCLK = %X %X\n", hi, lo);
|
|
}
|
|
|
|
/* Set number of lines for flat panels*/
|
|
static void set_number_of_lines(struct tridentfb_par *par, int lines)
|
|
{
|
|
int tmp = read3CE(par, CyberEnhance) & 0x8F;
|
|
if (lines > 1024)
|
|
tmp |= 0x50;
|
|
else if (lines > 768)
|
|
tmp |= 0x30;
|
|
else if (lines > 600)
|
|
tmp |= 0x20;
|
|
else if (lines > 480)
|
|
tmp |= 0x10;
|
|
write3CE(par, CyberEnhance, tmp);
|
|
}
|
|
|
|
/*
|
|
* If we see that FP is active we assume we have one.
|
|
* Otherwise we have a CRT display. User can override.
|
|
*/
|
|
static int is_flatpanel(struct tridentfb_par *par)
|
|
{
|
|
if (fp)
|
|
return 1;
|
|
if (crt || !iscyber(par->chip_id))
|
|
return 0;
|
|
return (read3CE(par, FPConfig) & 0x10) ? 1 : 0;
|
|
}
|
|
|
|
/* Try detecting the video memory size */
|
|
static unsigned int get_memsize(struct tridentfb_par *par)
|
|
{
|
|
unsigned char tmp, tmp2;
|
|
unsigned int k;
|
|
|
|
/* If memory size provided by user */
|
|
if (memsize)
|
|
k = memsize * Kb;
|
|
else
|
|
switch (par->chip_id) {
|
|
case CYBER9525DVD:
|
|
k = 2560 * Kb;
|
|
break;
|
|
default:
|
|
tmp = read3X4(par, SPR) & 0x0F;
|
|
switch (tmp) {
|
|
|
|
case 0x01:
|
|
k = 512 * Kb;
|
|
break;
|
|
case 0x02:
|
|
k = 6 * Mb; /* XP */
|
|
break;
|
|
case 0x03:
|
|
k = 1 * Mb;
|
|
break;
|
|
case 0x04:
|
|
k = 8 * Mb;
|
|
break;
|
|
case 0x06:
|
|
k = 10 * Mb; /* XP */
|
|
break;
|
|
case 0x07:
|
|
k = 2 * Mb;
|
|
break;
|
|
case 0x08:
|
|
k = 12 * Mb; /* XP */
|
|
break;
|
|
case 0x0A:
|
|
k = 14 * Mb; /* XP */
|
|
break;
|
|
case 0x0C:
|
|
k = 16 * Mb; /* XP */
|
|
break;
|
|
case 0x0E: /* XP */
|
|
|
|
tmp2 = vga_mm_rseq(par->io_virt, 0xC1);
|
|
switch (tmp2) {
|
|
case 0x00:
|
|
k = 20 * Mb;
|
|
break;
|
|
case 0x01:
|
|
k = 24 * Mb;
|
|
break;
|
|
case 0x10:
|
|
k = 28 * Mb;
|
|
break;
|
|
case 0x11:
|
|
k = 32 * Mb;
|
|
break;
|
|
default:
|
|
k = 1 * Mb;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case 0x0F:
|
|
k = 4 * Mb;
|
|
break;
|
|
default:
|
|
k = 1 * Mb;
|
|
break;
|
|
}
|
|
}
|
|
|
|
k -= memdiff * Kb;
|
|
output("framebuffer size = %d Kb\n", k / Kb);
|
|
return k;
|
|
}
|
|
|
|
/* See if we can handle the video mode described in var */
|
|
static int tridentfb_check_var(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
struct tridentfb_par *par = info->par;
|
|
int bpp = var->bits_per_pixel;
|
|
int line_length;
|
|
int ramdac = 230000; /* 230MHz for most 3D chips */
|
|
debug("enter\n");
|
|
|
|
/* check color depth */
|
|
if (bpp == 24)
|
|
bpp = var->bits_per_pixel = 32;
|
|
if (bpp != 8 && bpp != 16 && bpp != 32)
|
|
return -EINVAL;
|
|
if (par->chip_id == TGUI9440 && bpp == 32)
|
|
return -EINVAL;
|
|
/* check whether resolution fits on panel and in memory */
|
|
if (par->flatpanel && nativex && var->xres > nativex)
|
|
return -EINVAL;
|
|
/* various resolution checks */
|
|
var->xres = (var->xres + 7) & ~0x7;
|
|
if (var->xres > var->xres_virtual)
|
|
var->xres_virtual = var->xres;
|
|
if (var->yres > var->yres_virtual)
|
|
var->yres_virtual = var->yres;
|
|
if (var->xres_virtual > 4095 || var->yres > 2048)
|
|
return -EINVAL;
|
|
/* prevent from position overflow for acceleration */
|
|
if (var->yres_virtual > 0xffff)
|
|
return -EINVAL;
|
|
line_length = var->xres_virtual * bpp / 8;
|
|
|
|
if (!is3Dchip(par->chip_id) &&
|
|
!(info->flags & FBINFO_HWACCEL_DISABLED)) {
|
|
/* acceleration requires line length to be power of 2 */
|
|
if (line_length <= 512)
|
|
var->xres_virtual = 512 * 8 / bpp;
|
|
else if (line_length <= 1024)
|
|
var->xres_virtual = 1024 * 8 / bpp;
|
|
else if (line_length <= 2048)
|
|
var->xres_virtual = 2048 * 8 / bpp;
|
|
else if (line_length <= 4096)
|
|
var->xres_virtual = 4096 * 8 / bpp;
|
|
else if (line_length <= 8192)
|
|
var->xres_virtual = 8192 * 8 / bpp;
|
|
else
|
|
return -EINVAL;
|
|
|
|
line_length = var->xres_virtual * bpp / 8;
|
|
}
|
|
|
|
/* datasheet specifies how to set panning only up to 4 MB */
|
|
if (line_length * (var->yres_virtual - var->yres) > (4 << 20))
|
|
var->yres_virtual = ((4 << 20) / line_length) + var->yres;
|
|
|
|
if (line_length * var->yres_virtual > info->fix.smem_len)
|
|
return -EINVAL;
|
|
|
|
switch (bpp) {
|
|
case 8:
|
|
var->red.offset = 0;
|
|
var->red.length = 8;
|
|
var->green = var->red;
|
|
var->blue = var->red;
|
|
break;
|
|
case 16:
|
|
var->red.offset = 11;
|
|
var->green.offset = 5;
|
|
var->blue.offset = 0;
|
|
var->red.length = 5;
|
|
var->green.length = 6;
|
|
var->blue.length = 5;
|
|
break;
|
|
case 32:
|
|
var->red.offset = 16;
|
|
var->green.offset = 8;
|
|
var->blue.offset = 0;
|
|
var->red.length = 8;
|
|
var->green.length = 8;
|
|
var->blue.length = 8;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (is_xp(par->chip_id))
|
|
ramdac = 350000;
|
|
|
|
switch (par->chip_id) {
|
|
case TGUI9440:
|
|
ramdac = (bpp >= 16) ? 45000 : 90000;
|
|
break;
|
|
case CYBER9320:
|
|
case TGUI9660:
|
|
ramdac = 135000;
|
|
break;
|
|
case PROVIDIA9685:
|
|
case CYBER9388:
|
|
case CYBER9382:
|
|
case CYBER9385:
|
|
ramdac = 170000;
|
|
break;
|
|
}
|
|
|
|
/* The clock is doubled for 32 bpp */
|
|
if (bpp == 32)
|
|
ramdac /= 2;
|
|
|
|
if (PICOS2KHZ(var->pixclock) > ramdac)
|
|
return -EINVAL;
|
|
|
|
debug("exit\n");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/* Pan the display */
|
|
static int tridentfb_pan_display(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
struct tridentfb_par *par = info->par;
|
|
unsigned int offset;
|
|
|
|
debug("enter\n");
|
|
offset = (var->xoffset + (var->yoffset * info->var.xres_virtual))
|
|
* info->var.bits_per_pixel / 32;
|
|
set_screen_start(par, offset);
|
|
debug("exit\n");
|
|
return 0;
|
|
}
|
|
|
|
static inline void shadowmode_on(struct tridentfb_par *par)
|
|
{
|
|
write3CE(par, CyberControl, read3CE(par, CyberControl) | 0x81);
|
|
}
|
|
|
|
static inline void shadowmode_off(struct tridentfb_par *par)
|
|
{
|
|
write3CE(par, CyberControl, read3CE(par, CyberControl) & 0x7E);
|
|
}
|
|
|
|
/* Set the hardware to the requested video mode */
|
|
static int tridentfb_set_par(struct fb_info *info)
|
|
{
|
|
struct tridentfb_par *par = info->par;
|
|
u32 htotal, hdispend, hsyncstart, hsyncend, hblankstart, hblankend;
|
|
u32 vtotal, vdispend, vsyncstart, vsyncend, vblankstart, vblankend;
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
int bpp = var->bits_per_pixel;
|
|
unsigned char tmp;
|
|
unsigned long vclk;
|
|
|
|
debug("enter\n");
|
|
hdispend = var->xres / 8 - 1;
|
|
hsyncstart = (var->xres + var->right_margin) / 8;
|
|
hsyncend = (var->xres + var->right_margin + var->hsync_len) / 8;
|
|
htotal = (var->xres + var->left_margin + var->right_margin +
|
|
var->hsync_len) / 8 - 5;
|
|
hblankstart = hdispend + 1;
|
|
hblankend = htotal + 3;
|
|
|
|
vdispend = var->yres - 1;
|
|
vsyncstart = var->yres + var->lower_margin;
|
|
vsyncend = vsyncstart + var->vsync_len;
|
|
vtotal = var->upper_margin + vsyncend - 2;
|
|
vblankstart = vdispend + 1;
|
|
vblankend = vtotal;
|
|
|
|
if (info->var.vmode & FB_VMODE_INTERLACED) {
|
|
vtotal /= 2;
|
|
vdispend /= 2;
|
|
vsyncstart /= 2;
|
|
vsyncend /= 2;
|
|
vblankstart /= 2;
|
|
vblankend /= 2;
|
|
}
|
|
|
|
enable_mmio(par);
|
|
crtc_unlock(par);
|
|
write3CE(par, CyberControl, 8);
|
|
tmp = 0xEB;
|
|
if (var->sync & FB_SYNC_HOR_HIGH_ACT)
|
|
tmp &= ~0x40;
|
|
if (var->sync & FB_SYNC_VERT_HIGH_ACT)
|
|
tmp &= ~0x80;
|
|
|
|
if (par->flatpanel && var->xres < nativex) {
|
|
/*
|
|
* on flat panels with native size larger
|
|
* than requested resolution decide whether
|
|
* we stretch or center
|
|
*/
|
|
t_outb(par, tmp | 0xC0, VGA_MIS_W);
|
|
|
|
shadowmode_on(par);
|
|
|
|
if (center)
|
|
screen_center(par);
|
|
else if (stretch)
|
|
screen_stretch(par);
|
|
|
|
} else {
|
|
t_outb(par, tmp, VGA_MIS_W);
|
|
write3CE(par, CyberControl, 8);
|
|
}
|
|
|
|
/* vertical timing values */
|
|
write3X4(par, VGA_CRTC_V_TOTAL, vtotal & 0xFF);
|
|
write3X4(par, VGA_CRTC_V_DISP_END, vdispend & 0xFF);
|
|
write3X4(par, VGA_CRTC_V_SYNC_START, vsyncstart & 0xFF);
|
|
write3X4(par, VGA_CRTC_V_SYNC_END, (vsyncend & 0x0F));
|
|
write3X4(par, VGA_CRTC_V_BLANK_START, vblankstart & 0xFF);
|
|
write3X4(par, VGA_CRTC_V_BLANK_END, vblankend & 0xFF);
|
|
|
|
/* horizontal timing values */
|
|
write3X4(par, VGA_CRTC_H_TOTAL, htotal & 0xFF);
|
|
write3X4(par, VGA_CRTC_H_DISP, hdispend & 0xFF);
|
|
write3X4(par, VGA_CRTC_H_SYNC_START, hsyncstart & 0xFF);
|
|
write3X4(par, VGA_CRTC_H_SYNC_END,
|
|
(hsyncend & 0x1F) | ((hblankend & 0x20) << 2));
|
|
write3X4(par, VGA_CRTC_H_BLANK_START, hblankstart & 0xFF);
|
|
write3X4(par, VGA_CRTC_H_BLANK_END, hblankend & 0x1F);
|
|
|
|
/* higher bits of vertical timing values */
|
|
tmp = 0x10;
|
|
if (vtotal & 0x100) tmp |= 0x01;
|
|
if (vdispend & 0x100) tmp |= 0x02;
|
|
if (vsyncstart & 0x100) tmp |= 0x04;
|
|
if (vblankstart & 0x100) tmp |= 0x08;
|
|
|
|
if (vtotal & 0x200) tmp |= 0x20;
|
|
if (vdispend & 0x200) tmp |= 0x40;
|
|
if (vsyncstart & 0x200) tmp |= 0x80;
|
|
write3X4(par, VGA_CRTC_OVERFLOW, tmp);
|
|
|
|
tmp = read3X4(par, CRTHiOrd) & 0x07;
|
|
tmp |= 0x08; /* line compare bit 10 */
|
|
if (vtotal & 0x400) tmp |= 0x80;
|
|
if (vblankstart & 0x400) tmp |= 0x40;
|
|
if (vsyncstart & 0x400) tmp |= 0x20;
|
|
if (vdispend & 0x400) tmp |= 0x10;
|
|
write3X4(par, CRTHiOrd, tmp);
|
|
|
|
tmp = (htotal >> 8) & 0x01;
|
|
tmp |= (hdispend >> 7) & 0x02;
|
|
tmp |= (hsyncstart >> 5) & 0x08;
|
|
tmp |= (hblankstart >> 4) & 0x10;
|
|
write3X4(par, HorizOverflow, tmp);
|
|
|
|
tmp = 0x40;
|
|
if (vblankstart & 0x200) tmp |= 0x20;
|
|
//FIXME if (info->var.vmode & FB_VMODE_DOUBLE) tmp |= 0x80; /* double scan for 200 line modes */
|
|
write3X4(par, VGA_CRTC_MAX_SCAN, tmp);
|
|
|
|
write3X4(par, VGA_CRTC_LINE_COMPARE, 0xFF);
|
|
write3X4(par, VGA_CRTC_PRESET_ROW, 0);
|
|
write3X4(par, VGA_CRTC_MODE, 0xC3);
|
|
|
|
write3X4(par, LinearAddReg, 0x20); /* enable linear addressing */
|
|
|
|
tmp = (info->var.vmode & FB_VMODE_INTERLACED) ? 0x84 : 0x80;
|
|
/* enable access extended memory */
|
|
write3X4(par, CRTCModuleTest, tmp);
|
|
tmp = read3CE(par, MiscIntContReg) & ~0x4;
|
|
if (info->var.vmode & FB_VMODE_INTERLACED)
|
|
tmp |= 0x4;
|
|
write3CE(par, MiscIntContReg, tmp);
|
|
|
|
/* enable GE for text acceleration */
|
|
write3X4(par, GraphEngReg, 0x80);
|
|
|
|
switch (bpp) {
|
|
case 8:
|
|
tmp = 0x00;
|
|
break;
|
|
case 16:
|
|
tmp = 0x05;
|
|
break;
|
|
case 24:
|
|
tmp = 0x29;
|
|
break;
|
|
case 32:
|
|
tmp = 0x09;
|
|
break;
|
|
}
|
|
|
|
write3X4(par, PixelBusReg, tmp);
|
|
|
|
tmp = read3X4(par, DRAMControl);
|
|
if (!is_oldprotect(par->chip_id))
|
|
tmp |= 0x10;
|
|
if (iscyber(par->chip_id))
|
|
tmp |= 0x20;
|
|
write3X4(par, DRAMControl, tmp); /* both IO, linear enable */
|
|
|
|
write3X4(par, InterfaceSel, read3X4(par, InterfaceSel) | 0x40);
|
|
if (!is_xp(par->chip_id))
|
|
write3X4(par, Performance, read3X4(par, Performance) | 0x10);
|
|
/* MMIO & PCI read and write burst enable */
|
|
if (par->chip_id != TGUI9440 && par->chip_id != IMAGE975)
|
|
write3X4(par, PCIReg, read3X4(par, PCIReg) | 0x06);
|
|
|
|
vga_mm_wseq(par->io_virt, 0, 3);
|
|
vga_mm_wseq(par->io_virt, 1, 1); /* set char clock 8 dots wide */
|
|
/* enable 4 maps because needed in chain4 mode */
|
|
vga_mm_wseq(par->io_virt, 2, 0x0F);
|
|
vga_mm_wseq(par->io_virt, 3, 0);
|
|
vga_mm_wseq(par->io_virt, 4, 0x0E); /* memory mode enable bitmaps ?? */
|
|
|
|
/* convert from picoseconds to kHz */
|
|
vclk = PICOS2KHZ(info->var.pixclock);
|
|
|
|
/* divide clock by 2 if 32bpp chain4 mode display and CPU path */
|
|
tmp = read3CE(par, MiscExtFunc) & 0xF0;
|
|
if (bpp == 32 || (par->chip_id == TGUI9440 && bpp == 16)) {
|
|
tmp |= 8;
|
|
vclk *= 2;
|
|
}
|
|
set_vclk(par, vclk);
|
|
write3CE(par, MiscExtFunc, tmp | 0x12);
|
|
write3CE(par, 0x5, 0x40); /* no CGA compat, allow 256 col */
|
|
write3CE(par, 0x6, 0x05); /* graphics mode */
|
|
write3CE(par, 0x7, 0x0F); /* planes? */
|
|
|
|
/* graphics mode and support 256 color modes */
|
|
writeAttr(par, 0x10, 0x41);
|
|
writeAttr(par, 0x12, 0x0F); /* planes */
|
|
writeAttr(par, 0x13, 0); /* horizontal pel panning */
|
|
|
|
/* colors */
|
|
for (tmp = 0; tmp < 0x10; tmp++)
|
|
writeAttr(par, tmp, tmp);
|
|
fb_readb(par->io_virt + VGA_IS1_RC); /* flip-flop to index */
|
|
t_outb(par, 0x20, VGA_ATT_W); /* enable attr */
|
|
|
|
switch (bpp) {
|
|
case 8:
|
|
tmp = 0;
|
|
break;
|
|
case 16:
|
|
tmp = 0x30;
|
|
break;
|
|
case 24:
|
|
case 32:
|
|
tmp = 0xD0;
|
|
break;
|
|
}
|
|
|
|
t_inb(par, VGA_PEL_IW);
|
|
t_inb(par, VGA_PEL_MSK);
|
|
t_inb(par, VGA_PEL_MSK);
|
|
t_inb(par, VGA_PEL_MSK);
|
|
t_inb(par, VGA_PEL_MSK);
|
|
t_outb(par, tmp, VGA_PEL_MSK);
|
|
t_inb(par, VGA_PEL_IW);
|
|
|
|
if (par->flatpanel)
|
|
set_number_of_lines(par, info->var.yres);
|
|
info->fix.line_length = info->var.xres_virtual * bpp / 8;
|
|
set_lwidth(par, info->fix.line_length / 8);
|
|
|
|
if (!(info->flags & FBINFO_HWACCEL_DISABLED))
|
|
par->init_accel(par, info->var.xres_virtual, bpp);
|
|
|
|
info->fix.visual = (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
|
|
info->cmap.len = (bpp == 8) ? 256 : 16;
|
|
debug("exit\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Set one color register */
|
|
static int tridentfb_setcolreg(unsigned regno, unsigned red, unsigned green,
|
|
unsigned blue, unsigned transp,
|
|
struct fb_info *info)
|
|
{
|
|
int bpp = info->var.bits_per_pixel;
|
|
struct tridentfb_par *par = info->par;
|
|
|
|
if (regno >= info->cmap.len)
|
|
return 1;
|
|
|
|
if (bpp == 8) {
|
|
t_outb(par, 0xFF, VGA_PEL_MSK);
|
|
t_outb(par, regno, VGA_PEL_IW);
|
|
|
|
t_outb(par, red >> 10, VGA_PEL_D);
|
|
t_outb(par, green >> 10, VGA_PEL_D);
|
|
t_outb(par, blue >> 10, VGA_PEL_D);
|
|
|
|
} else if (regno < 16) {
|
|
if (bpp == 16) { /* RGB 565 */
|
|
u32 col;
|
|
|
|
col = (red & 0xF800) | ((green & 0xFC00) >> 5) |
|
|
((blue & 0xF800) >> 11);
|
|
col |= col << 16;
|
|
((u32 *)(info->pseudo_palette))[regno] = col;
|
|
} else if (bpp == 32) /* ARGB 8888 */
|
|
((u32 *)info->pseudo_palette)[regno] =
|
|
((transp & 0xFF00) << 16) |
|
|
((red & 0xFF00) << 8) |
|
|
((green & 0xFF00)) |
|
|
((blue & 0xFF00) >> 8);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Try blanking the screen. For flat panels it does nothing */
|
|
static int tridentfb_blank(int blank_mode, struct fb_info *info)
|
|
{
|
|
unsigned char PMCont, DPMSCont;
|
|
struct tridentfb_par *par = info->par;
|
|
|
|
debug("enter\n");
|
|
if (par->flatpanel)
|
|
return 0;
|
|
t_outb(par, 0x04, 0x83C8); /* Read DPMS Control */
|
|
PMCont = t_inb(par, 0x83C6) & 0xFC;
|
|
DPMSCont = read3CE(par, PowerStatus) & 0xFC;
|
|
switch (blank_mode) {
|
|
case FB_BLANK_UNBLANK:
|
|
/* Screen: On, HSync: On, VSync: On */
|
|
case FB_BLANK_NORMAL:
|
|
/* Screen: Off, HSync: On, VSync: On */
|
|
PMCont |= 0x03;
|
|
DPMSCont |= 0x00;
|
|
break;
|
|
case FB_BLANK_HSYNC_SUSPEND:
|
|
/* Screen: Off, HSync: Off, VSync: On */
|
|
PMCont |= 0x02;
|
|
DPMSCont |= 0x01;
|
|
break;
|
|
case FB_BLANK_VSYNC_SUSPEND:
|
|
/* Screen: Off, HSync: On, VSync: Off */
|
|
PMCont |= 0x02;
|
|
DPMSCont |= 0x02;
|
|
break;
|
|
case FB_BLANK_POWERDOWN:
|
|
/* Screen: Off, HSync: Off, VSync: Off */
|
|
PMCont |= 0x00;
|
|
DPMSCont |= 0x03;
|
|
break;
|
|
}
|
|
|
|
write3CE(par, PowerStatus, DPMSCont);
|
|
t_outb(par, 4, 0x83C8);
|
|
t_outb(par, PMCont, 0x83C6);
|
|
|
|
debug("exit\n");
|
|
|
|
/* let fbcon do a softblank for us */
|
|
return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0;
|
|
}
|
|
|
|
static const struct fb_ops tridentfb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_setcolreg = tridentfb_setcolreg,
|
|
.fb_pan_display = tridentfb_pan_display,
|
|
.fb_blank = tridentfb_blank,
|
|
.fb_check_var = tridentfb_check_var,
|
|
.fb_set_par = tridentfb_set_par,
|
|
.fb_fillrect = tridentfb_fillrect,
|
|
.fb_copyarea = tridentfb_copyarea,
|
|
.fb_imageblit = tridentfb_imageblit,
|
|
.fb_sync = tridentfb_sync,
|
|
};
|
|
|
|
static int trident_pci_probe(struct pci_dev *dev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
int err;
|
|
unsigned char revision;
|
|
struct fb_info *info;
|
|
struct tridentfb_par *default_par;
|
|
int chip3D;
|
|
int chip_id;
|
|
bool found = false;
|
|
|
|
err = pci_enable_device(dev);
|
|
if (err)
|
|
return err;
|
|
|
|
info = framebuffer_alloc(sizeof(struct tridentfb_par), &dev->dev);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
default_par = info->par;
|
|
|
|
chip_id = id->device;
|
|
|
|
/* If PCI id is 0x9660 then further detect chip type */
|
|
|
|
if (chip_id == TGUI9660) {
|
|
revision = vga_io_rseq(RevisionID);
|
|
|
|
switch (revision) {
|
|
case 0x21:
|
|
chip_id = PROVIDIA9685;
|
|
break;
|
|
case 0x22:
|
|
case 0x23:
|
|
chip_id = CYBER9397;
|
|
break;
|
|
case 0x2A:
|
|
chip_id = CYBER9397DVD;
|
|
break;
|
|
case 0x30:
|
|
case 0x33:
|
|
case 0x34:
|
|
case 0x35:
|
|
case 0x38:
|
|
case 0x3A:
|
|
case 0xB3:
|
|
chip_id = CYBER9385;
|
|
break;
|
|
case 0x40 ... 0x43:
|
|
chip_id = CYBER9382;
|
|
break;
|
|
case 0x4A:
|
|
chip_id = CYBER9388;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
chip3D = is3Dchip(chip_id);
|
|
|
|
if (is_xp(chip_id)) {
|
|
default_par->init_accel = xp_init_accel;
|
|
default_par->wait_engine = xp_wait_engine;
|
|
default_par->fill_rect = xp_fill_rect;
|
|
default_par->copy_rect = xp_copy_rect;
|
|
tridentfb_fix.accel = FB_ACCEL_TRIDENT_BLADEXP;
|
|
} else if (is_blade(chip_id)) {
|
|
default_par->init_accel = blade_init_accel;
|
|
default_par->wait_engine = blade_wait_engine;
|
|
default_par->fill_rect = blade_fill_rect;
|
|
default_par->copy_rect = blade_copy_rect;
|
|
default_par->image_blit = blade_image_blit;
|
|
tridentfb_fix.accel = FB_ACCEL_TRIDENT_BLADE3D;
|
|
} else if (chip3D) { /* 3DImage family left */
|
|
default_par->init_accel = image_init_accel;
|
|
default_par->wait_engine = image_wait_engine;
|
|
default_par->fill_rect = image_fill_rect;
|
|
default_par->copy_rect = image_copy_rect;
|
|
tridentfb_fix.accel = FB_ACCEL_TRIDENT_3DIMAGE;
|
|
} else { /* TGUI 9440/96XX family */
|
|
default_par->init_accel = tgui_init_accel;
|
|
default_par->wait_engine = xp_wait_engine;
|
|
default_par->fill_rect = tgui_fill_rect;
|
|
default_par->copy_rect = tgui_copy_rect;
|
|
tridentfb_fix.accel = FB_ACCEL_TRIDENT_TGUI;
|
|
}
|
|
|
|
default_par->chip_id = chip_id;
|
|
|
|
/* setup MMIO region */
|
|
tridentfb_fix.mmio_start = pci_resource_start(dev, 1);
|
|
tridentfb_fix.mmio_len = pci_resource_len(dev, 1);
|
|
|
|
if (!request_mem_region(tridentfb_fix.mmio_start,
|
|
tridentfb_fix.mmio_len, "tridentfb")) {
|
|
debug("request_region failed!\n");
|
|
framebuffer_release(info);
|
|
return -1;
|
|
}
|
|
|
|
default_par->io_virt = ioremap(tridentfb_fix.mmio_start,
|
|
tridentfb_fix.mmio_len);
|
|
|
|
if (!default_par->io_virt) {
|
|
debug("ioremap failed\n");
|
|
err = -1;
|
|
goto out_unmap1;
|
|
}
|
|
|
|
enable_mmio(default_par);
|
|
|
|
/* setup framebuffer memory */
|
|
tridentfb_fix.smem_start = pci_resource_start(dev, 0);
|
|
tridentfb_fix.smem_len = get_memsize(default_par);
|
|
|
|
if (!request_mem_region(tridentfb_fix.smem_start,
|
|
tridentfb_fix.smem_len, "tridentfb")) {
|
|
debug("request_mem_region failed!\n");
|
|
disable_mmio(info->par);
|
|
err = -1;
|
|
goto out_unmap1;
|
|
}
|
|
|
|
info->screen_base = ioremap(tridentfb_fix.smem_start,
|
|
tridentfb_fix.smem_len);
|
|
|
|
if (!info->screen_base) {
|
|
debug("ioremap failed\n");
|
|
err = -1;
|
|
goto out_unmap2;
|
|
}
|
|
|
|
default_par->flatpanel = is_flatpanel(default_par);
|
|
|
|
if (default_par->flatpanel)
|
|
nativex = get_nativex(default_par);
|
|
|
|
info->fix = tridentfb_fix;
|
|
info->fbops = &tridentfb_ops;
|
|
info->pseudo_palette = default_par->pseudo_pal;
|
|
|
|
info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
|
|
if (!noaccel && default_par->init_accel) {
|
|
info->flags &= ~FBINFO_HWACCEL_DISABLED;
|
|
info->flags |= FBINFO_HWACCEL_COPYAREA;
|
|
info->flags |= FBINFO_HWACCEL_FILLRECT;
|
|
} else
|
|
info->flags |= FBINFO_HWACCEL_DISABLED;
|
|
|
|
if (is_blade(chip_id) && chip_id != BLADE3D)
|
|
info->flags |= FBINFO_READS_FAST;
|
|
|
|
info->pixmap.addr = kmalloc(4096, GFP_KERNEL);
|
|
if (!info->pixmap.addr) {
|
|
err = -ENOMEM;
|
|
goto out_unmap2;
|
|
}
|
|
|
|
info->pixmap.size = 4096;
|
|
info->pixmap.buf_align = 4;
|
|
info->pixmap.scan_align = 1;
|
|
info->pixmap.access_align = 32;
|
|
info->pixmap.flags = FB_PIXMAP_SYSTEM;
|
|
info->var.bits_per_pixel = 8;
|
|
|
|
if (default_par->image_blit) {
|
|
info->flags |= FBINFO_HWACCEL_IMAGEBLIT;
|
|
info->pixmap.scan_align = 4;
|
|
}
|
|
|
|
if (noaccel) {
|
|
printk(KERN_DEBUG "disabling acceleration\n");
|
|
info->flags |= FBINFO_HWACCEL_DISABLED;
|
|
info->pixmap.scan_align = 1;
|
|
}
|
|
|
|
if (tridentfb_setup_ddc_bus(info) == 0) {
|
|
u8 *edid = fb_ddc_read(&default_par->ddc_adapter);
|
|
|
|
default_par->ddc_registered = true;
|
|
if (edid) {
|
|
fb_edid_to_monspecs(edid, &info->monspecs);
|
|
kfree(edid);
|
|
if (!info->monspecs.modedb)
|
|
dev_err(info->device, "error getting mode database\n");
|
|
else {
|
|
const struct fb_videomode *m;
|
|
|
|
fb_videomode_to_modelist(info->monspecs.modedb,
|
|
info->monspecs.modedb_len,
|
|
&info->modelist);
|
|
m = fb_find_best_display(&info->monspecs,
|
|
&info->modelist);
|
|
if (m) {
|
|
fb_videomode_to_var(&info->var, m);
|
|
/* fill all other info->var's fields */
|
|
if (tridentfb_check_var(&info->var,
|
|
info) == 0)
|
|
found = true;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!mode_option && !found)
|
|
mode_option = "640x480-8@60";
|
|
|
|
/* Prepare startup mode */
|
|
if (mode_option) {
|
|
err = fb_find_mode(&info->var, info, mode_option,
|
|
info->monspecs.modedb,
|
|
info->monspecs.modedb_len,
|
|
NULL, info->var.bits_per_pixel);
|
|
if (!err || err == 4) {
|
|
err = -EINVAL;
|
|
dev_err(info->device, "mode %s not found\n",
|
|
mode_option);
|
|
fb_destroy_modedb(info->monspecs.modedb);
|
|
info->monspecs.modedb = NULL;
|
|
goto out_unmap2;
|
|
}
|
|
}
|
|
|
|
fb_destroy_modedb(info->monspecs.modedb);
|
|
info->monspecs.modedb = NULL;
|
|
|
|
err = fb_alloc_cmap(&info->cmap, 256, 0);
|
|
if (err < 0)
|
|
goto out_unmap2;
|
|
|
|
info->var.activate |= FB_ACTIVATE_NOW;
|
|
info->device = &dev->dev;
|
|
if (register_framebuffer(info) < 0) {
|
|
printk(KERN_ERR "tridentfb: could not register framebuffer\n");
|
|
fb_dealloc_cmap(&info->cmap);
|
|
err = -EINVAL;
|
|
goto out_unmap2;
|
|
}
|
|
output("fb%d: %s frame buffer device %dx%d-%dbpp\n",
|
|
info->node, info->fix.id, info->var.xres,
|
|
info->var.yres, info->var.bits_per_pixel);
|
|
|
|
pci_set_drvdata(dev, info);
|
|
return 0;
|
|
|
|
out_unmap2:
|
|
if (default_par->ddc_registered)
|
|
i2c_del_adapter(&default_par->ddc_adapter);
|
|
kfree(info->pixmap.addr);
|
|
if (info->screen_base)
|
|
iounmap(info->screen_base);
|
|
release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
|
|
disable_mmio(info->par);
|
|
out_unmap1:
|
|
if (default_par->io_virt)
|
|
iounmap(default_par->io_virt);
|
|
release_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
|
|
framebuffer_release(info);
|
|
return err;
|
|
}
|
|
|
|
static void trident_pci_remove(struct pci_dev *dev)
|
|
{
|
|
struct fb_info *info = pci_get_drvdata(dev);
|
|
struct tridentfb_par *par = info->par;
|
|
|
|
unregister_framebuffer(info);
|
|
if (par->ddc_registered)
|
|
i2c_del_adapter(&par->ddc_adapter);
|
|
iounmap(par->io_virt);
|
|
iounmap(info->screen_base);
|
|
release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
|
|
release_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
|
|
kfree(info->pixmap.addr);
|
|
fb_dealloc_cmap(&info->cmap);
|
|
framebuffer_release(info);
|
|
}
|
|
|
|
/* List of boards that we are trying to support */
|
|
static const struct pci_device_id trident_devices[] = {
|
|
{PCI_VENDOR_ID_TRIDENT, BLADE3D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEi7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEi7D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEi1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEi1D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEAi1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEAi1D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEE4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, TGUI9440, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, TGUI9660, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, IMAGE975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, IMAGE985, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBER9320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBER9388, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBER9520, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBER9525DVD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBER9397, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBER9397DVD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEXPAi1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEXPm8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEXPm16, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{0,}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, trident_devices);
|
|
|
|
static struct pci_driver tridentfb_pci_driver = {
|
|
.name = "tridentfb",
|
|
.id_table = trident_devices,
|
|
.probe = trident_pci_probe,
|
|
.remove = trident_pci_remove,
|
|
};
|
|
|
|
/*
|
|
* Parse user specified options (`video=trident:')
|
|
* example:
|
|
* video=trident:800x600,bpp=16,noaccel
|
|
*/
|
|
#ifndef MODULE
|
|
static int __init tridentfb_setup(char *options)
|
|
{
|
|
char *opt;
|
|
if (!options || !*options)
|
|
return 0;
|
|
while ((opt = strsep(&options, ",")) != NULL) {
|
|
if (!*opt)
|
|
continue;
|
|
if (!strncmp(opt, "noaccel", 7))
|
|
noaccel = 1;
|
|
else if (!strncmp(opt, "fp", 2))
|
|
fp = 1;
|
|
else if (!strncmp(opt, "crt", 3))
|
|
fp = 0;
|
|
else if (!strncmp(opt, "bpp=", 4))
|
|
bpp = simple_strtoul(opt + 4, NULL, 0);
|
|
else if (!strncmp(opt, "center", 6))
|
|
center = 1;
|
|
else if (!strncmp(opt, "stretch", 7))
|
|
stretch = 1;
|
|
else if (!strncmp(opt, "memsize=", 8))
|
|
memsize = simple_strtoul(opt + 8, NULL, 0);
|
|
else if (!strncmp(opt, "memdiff=", 8))
|
|
memdiff = simple_strtoul(opt + 8, NULL, 0);
|
|
else if (!strncmp(opt, "nativex=", 8))
|
|
nativex = simple_strtoul(opt + 8, NULL, 0);
|
|
else
|
|
mode_option = opt;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int __init tridentfb_init(void)
|
|
{
|
|
#ifndef MODULE
|
|
char *option = NULL;
|
|
|
|
if (fb_get_options("tridentfb", &option))
|
|
return -ENODEV;
|
|
tridentfb_setup(option);
|
|
#endif
|
|
return pci_register_driver(&tridentfb_pci_driver);
|
|
}
|
|
|
|
static void __exit tridentfb_exit(void)
|
|
{
|
|
pci_unregister_driver(&tridentfb_pci_driver);
|
|
}
|
|
|
|
module_init(tridentfb_init);
|
|
module_exit(tridentfb_exit);
|
|
|
|
MODULE_AUTHOR("Jani Monoses <jani@iv.ro>");
|
|
MODULE_DESCRIPTION("Framebuffer driver for Trident cards");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("cyblafb");
|
|
|