mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 21:37:58 +07:00
f6da28429a
The values of these parameters will be different for differnet panel based on dsi rate, lane count, etc. Remove the hardcodings and make these as parameters whch will be initialized in panel specific sub-encoder implementaion. This will also form groundwork for planned generic panel sub-encoder implemntation based on VBT design enhancments to support multiple panels v2: Mask away the port_bits before use Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
638 lines
19 KiB
C
638 lines
19 KiB
C
/*
|
|
* Copyright © 2013 Intel Corporation
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the next
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
* Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
|
|
* DEALINGS IN THE SOFTWARE.
|
|
*
|
|
* Author: Jani Nikula <jani.nikula@intel.com>
|
|
*/
|
|
|
|
#include <drm/drmP.h>
|
|
#include <drm/drm_crtc.h>
|
|
#include <drm/drm_edid.h>
|
|
#include <drm/i915_drm.h>
|
|
#include <linux/slab.h>
|
|
#include "i915_drv.h"
|
|
#include "intel_drv.h"
|
|
#include "intel_dsi.h"
|
|
#include "intel_dsi_cmd.h"
|
|
|
|
/* the sub-encoders aka panel drivers */
|
|
static const struct intel_dsi_device intel_dsi_devices[] = {
|
|
};
|
|
|
|
static void band_gap_reset(struct drm_i915_private *dev_priv)
|
|
{
|
|
mutex_lock(&dev_priv->dpio_lock);
|
|
|
|
vlv_flisdsi_write(dev_priv, 0x08, 0x0001);
|
|
vlv_flisdsi_write(dev_priv, 0x0F, 0x0005);
|
|
vlv_flisdsi_write(dev_priv, 0x0F, 0x0025);
|
|
udelay(150);
|
|
vlv_flisdsi_write(dev_priv, 0x0F, 0x0000);
|
|
vlv_flisdsi_write(dev_priv, 0x08, 0x0000);
|
|
|
|
mutex_unlock(&dev_priv->dpio_lock);
|
|
}
|
|
|
|
static struct intel_dsi *intel_attached_dsi(struct drm_connector *connector)
|
|
{
|
|
return container_of(intel_attached_encoder(connector),
|
|
struct intel_dsi, base);
|
|
}
|
|
|
|
static inline bool is_vid_mode(struct intel_dsi *intel_dsi)
|
|
{
|
|
return intel_dsi->dev.type == INTEL_DSI_VIDEO_MODE;
|
|
}
|
|
|
|
static inline bool is_cmd_mode(struct intel_dsi *intel_dsi)
|
|
{
|
|
return intel_dsi->dev.type == INTEL_DSI_COMMAND_MODE;
|
|
}
|
|
|
|
static void intel_dsi_hot_plug(struct intel_encoder *encoder)
|
|
{
|
|
DRM_DEBUG_KMS("\n");
|
|
}
|
|
|
|
static bool intel_dsi_compute_config(struct intel_encoder *encoder,
|
|
struct intel_crtc_config *config)
|
|
{
|
|
struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi,
|
|
base);
|
|
struct intel_connector *intel_connector = intel_dsi->attached_connector;
|
|
struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
|
|
struct drm_display_mode *adjusted_mode = &config->adjusted_mode;
|
|
struct drm_display_mode *mode = &config->requested_mode;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
if (fixed_mode)
|
|
intel_fixed_panel_mode(fixed_mode, adjusted_mode);
|
|
|
|
if (intel_dsi->dev.dev_ops->mode_fixup)
|
|
return intel_dsi->dev.dev_ops->mode_fixup(&intel_dsi->dev,
|
|
mode, adjusted_mode);
|
|
|
|
return true;
|
|
}
|
|
|
|
static void intel_dsi_pre_pll_enable(struct intel_encoder *encoder)
|
|
{
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
vlv_enable_dsi_pll(encoder);
|
|
}
|
|
|
|
static void intel_dsi_device_ready(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
u32 val;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
val = I915_READ(MIPI_PORT_CTRL(pipe));
|
|
I915_WRITE(MIPI_PORT_CTRL(pipe), val | LP_OUTPUT_HOLD);
|
|
usleep_range(1000, 1500);
|
|
I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_EXIT);
|
|
usleep_range(2000, 2500);
|
|
I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY);
|
|
usleep_range(2000, 2500);
|
|
I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00);
|
|
usleep_range(2000, 2500);
|
|
I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY);
|
|
usleep_range(2000, 2500);
|
|
}
|
|
static void intel_dsi_pre_enable(struct intel_encoder *encoder)
|
|
{
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
if (intel_dsi->dev.dev_ops->panel_reset)
|
|
intel_dsi->dev.dev_ops->panel_reset(&intel_dsi->dev);
|
|
|
|
/* put device in ready state */
|
|
intel_dsi_device_ready(encoder);
|
|
|
|
if (intel_dsi->dev.dev_ops->send_otp_cmds)
|
|
intel_dsi->dev.dev_ops->send_otp_cmds(&intel_dsi->dev);
|
|
}
|
|
|
|
static void intel_dsi_enable(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_device *dev = encoder->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
int pipe = intel_crtc->pipe;
|
|
u32 temp;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
if (is_cmd_mode(intel_dsi))
|
|
I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(pipe), 8 * 4);
|
|
else {
|
|
msleep(20); /* XXX */
|
|
dpi_send_cmd(intel_dsi, TURN_ON);
|
|
msleep(100);
|
|
|
|
/* assert ip_tg_enable signal */
|
|
temp = I915_READ(MIPI_PORT_CTRL(pipe)) & ~LANE_CONFIGURATION_MASK;
|
|
temp = temp | intel_dsi->port_bits;
|
|
I915_WRITE(MIPI_PORT_CTRL(pipe), temp | DPI_ENABLE);
|
|
POSTING_READ(MIPI_PORT_CTRL(pipe));
|
|
}
|
|
|
|
if (intel_dsi->dev.dev_ops->enable)
|
|
intel_dsi->dev.dev_ops->enable(&intel_dsi->dev);
|
|
}
|
|
|
|
static void intel_dsi_disable(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_device *dev = encoder->base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
int pipe = intel_crtc->pipe;
|
|
u32 temp;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
if (is_vid_mode(intel_dsi)) {
|
|
dpi_send_cmd(intel_dsi, SHUTDOWN);
|
|
msleep(10);
|
|
|
|
/* de-assert ip_tg_enable signal */
|
|
temp = I915_READ(MIPI_PORT_CTRL(pipe));
|
|
I915_WRITE(MIPI_PORT_CTRL(pipe), temp & ~DPI_ENABLE);
|
|
POSTING_READ(MIPI_PORT_CTRL(pipe));
|
|
|
|
msleep(2);
|
|
}
|
|
|
|
/* if disable packets are sent before sending shutdown packet then in
|
|
* some next enable sequence send turn on packet error is observed */
|
|
if (intel_dsi->dev.dev_ops->disable)
|
|
intel_dsi->dev.dev_ops->disable(&intel_dsi->dev);
|
|
}
|
|
|
|
static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
|
|
int pipe = intel_crtc->pipe;
|
|
u32 val;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER);
|
|
usleep_range(2000, 2500);
|
|
|
|
I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_EXIT);
|
|
usleep_range(2000, 2500);
|
|
|
|
I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER);
|
|
usleep_range(2000, 2500);
|
|
|
|
val = I915_READ(MIPI_PORT_CTRL(pipe));
|
|
I915_WRITE(MIPI_PORT_CTRL(pipe), val & ~LP_OUTPUT_HOLD);
|
|
usleep_range(1000, 1500);
|
|
|
|
if (wait_for(((I915_READ(MIPI_PORT_CTRL(pipe)) & AFE_LATCHOUT)
|
|
== 0x00000), 30))
|
|
DRM_ERROR("DSI LP not going Low\n");
|
|
|
|
I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00);
|
|
usleep_range(2000, 2500);
|
|
|
|
vlv_disable_dsi_pll(encoder);
|
|
}
|
|
static void intel_dsi_post_disable(struct intel_encoder *encoder)
|
|
{
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
intel_dsi_clear_device_ready(encoder);
|
|
|
|
if (intel_dsi->dev.dev_ops->disable_panel_power)
|
|
intel_dsi->dev.dev_ops->disable_panel_power(&intel_dsi->dev);
|
|
}
|
|
|
|
static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
|
|
enum pipe *pipe)
|
|
{
|
|
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
|
|
u32 port, func;
|
|
enum pipe p;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
/* XXX: this only works for one DSI output */
|
|
for (p = PIPE_A; p <= PIPE_B; p++) {
|
|
port = I915_READ(MIPI_PORT_CTRL(p));
|
|
func = I915_READ(MIPI_DSI_FUNC_PRG(p));
|
|
|
|
if ((port & DPI_ENABLE) || (func & CMD_MODE_DATA_WIDTH_MASK)) {
|
|
if (I915_READ(MIPI_DEVICE_READY(p)) & DEVICE_READY) {
|
|
*pipe = p;
|
|
return true;
|
|
}
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static void intel_dsi_get_config(struct intel_encoder *encoder,
|
|
struct intel_crtc_config *pipe_config)
|
|
{
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
/* XXX: read flags, set to adjusted_mode */
|
|
}
|
|
|
|
static enum drm_mode_status
|
|
intel_dsi_mode_valid(struct drm_connector *connector,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
struct intel_connector *intel_connector = to_intel_connector(connector);
|
|
struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
|
|
struct intel_dsi *intel_dsi = intel_attached_dsi(connector);
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
if (mode->flags & DRM_MODE_FLAG_DBLSCAN) {
|
|
DRM_DEBUG_KMS("MODE_NO_DBLESCAN\n");
|
|
return MODE_NO_DBLESCAN;
|
|
}
|
|
|
|
if (fixed_mode) {
|
|
if (mode->hdisplay > fixed_mode->hdisplay)
|
|
return MODE_PANEL;
|
|
if (mode->vdisplay > fixed_mode->vdisplay)
|
|
return MODE_PANEL;
|
|
}
|
|
|
|
return intel_dsi->dev.dev_ops->mode_valid(&intel_dsi->dev, mode);
|
|
}
|
|
|
|
/* return txclkesc cycles in terms of divider and duration in us */
|
|
static u16 txclkesc(u32 divider, unsigned int us)
|
|
{
|
|
switch (divider) {
|
|
case ESCAPE_CLOCK_DIVIDER_1:
|
|
default:
|
|
return 20 * us;
|
|
case ESCAPE_CLOCK_DIVIDER_2:
|
|
return 10 * us;
|
|
case ESCAPE_CLOCK_DIVIDER_4:
|
|
return 5 * us;
|
|
}
|
|
}
|
|
|
|
/* return pixels in terms of txbyteclkhs */
|
|
static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count)
|
|
{
|
|
return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp, 8), lane_count);
|
|
}
|
|
|
|
static void set_dsi_timings(struct drm_encoder *encoder,
|
|
const struct drm_display_mode *mode)
|
|
{
|
|
struct drm_device *dev = encoder->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
|
|
int pipe = intel_crtc->pipe;
|
|
unsigned int bpp = intel_crtc->config.pipe_bpp;
|
|
unsigned int lane_count = intel_dsi->lane_count;
|
|
|
|
u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
|
|
|
|
hactive = mode->hdisplay;
|
|
hfp = mode->hsync_start - mode->hdisplay;
|
|
hsync = mode->hsync_end - mode->hsync_start;
|
|
hbp = mode->htotal - mode->hsync_end;
|
|
|
|
vfp = mode->vsync_start - mode->vdisplay;
|
|
vsync = mode->vsync_end - mode->vsync_start;
|
|
vbp = mode->vtotal - mode->vsync_end;
|
|
|
|
/* horizontal values are in terms of high speed byte clock */
|
|
hactive = txbyteclkhs(hactive, bpp, lane_count);
|
|
hfp = txbyteclkhs(hfp, bpp, lane_count);
|
|
hsync = txbyteclkhs(hsync, bpp, lane_count);
|
|
hbp = txbyteclkhs(hbp, bpp, lane_count);
|
|
|
|
I915_WRITE(MIPI_HACTIVE_AREA_COUNT(pipe), hactive);
|
|
I915_WRITE(MIPI_HFP_COUNT(pipe), hfp);
|
|
|
|
/* meaningful for video mode non-burst sync pulse mode only, can be zero
|
|
* for non-burst sync events and burst modes */
|
|
I915_WRITE(MIPI_HSYNC_PADDING_COUNT(pipe), hsync);
|
|
I915_WRITE(MIPI_HBP_COUNT(pipe), hbp);
|
|
|
|
/* vertical values are in terms of lines */
|
|
I915_WRITE(MIPI_VFP_COUNT(pipe), vfp);
|
|
I915_WRITE(MIPI_VSYNC_PADDING_COUNT(pipe), vsync);
|
|
I915_WRITE(MIPI_VBP_COUNT(pipe), vbp);
|
|
}
|
|
|
|
static void intel_dsi_mode_set(struct intel_encoder *intel_encoder)
|
|
{
|
|
struct drm_encoder *encoder = &intel_encoder->base;
|
|
struct drm_device *dev = encoder->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
|
|
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
|
|
struct drm_display_mode *adjusted_mode =
|
|
&intel_crtc->config.adjusted_mode;
|
|
int pipe = intel_crtc->pipe;
|
|
unsigned int bpp = intel_crtc->config.pipe_bpp;
|
|
u32 val, tmp;
|
|
|
|
DRM_DEBUG_KMS("pipe %c\n", pipe_name(pipe));
|
|
|
|
/* XXX: Location of the call */
|
|
band_gap_reset(dev_priv);
|
|
|
|
/* escape clock divider, 20MHz, shared for A and C. device ready must be
|
|
* off when doing this! txclkesc? */
|
|
tmp = I915_READ(MIPI_CTRL(0));
|
|
tmp &= ~ESCAPE_CLOCK_DIVIDER_MASK;
|
|
I915_WRITE(MIPI_CTRL(0), tmp | ESCAPE_CLOCK_DIVIDER_1);
|
|
|
|
/* read request priority is per pipe */
|
|
tmp = I915_READ(MIPI_CTRL(pipe));
|
|
tmp &= ~READ_REQUEST_PRIORITY_MASK;
|
|
I915_WRITE(MIPI_CTRL(pipe), tmp | READ_REQUEST_PRIORITY_HIGH);
|
|
|
|
/* XXX: why here, why like this? handling in irq handler?! */
|
|
I915_WRITE(MIPI_INTR_STAT(pipe), 0xffffffff);
|
|
I915_WRITE(MIPI_INTR_EN(pipe), 0xffffffff);
|
|
|
|
I915_WRITE(MIPI_DPHY_PARAM(pipe), intel_dsi->dphy_reg);
|
|
|
|
I915_WRITE(MIPI_DPI_RESOLUTION(pipe),
|
|
adjusted_mode->vdisplay << VERTICAL_ADDRESS_SHIFT |
|
|
adjusted_mode->hdisplay << HORIZONTAL_ADDRESS_SHIFT);
|
|
|
|
set_dsi_timings(encoder, adjusted_mode);
|
|
|
|
val = intel_dsi->lane_count << DATA_LANES_PRG_REG_SHIFT;
|
|
if (is_cmd_mode(intel_dsi)) {
|
|
val |= intel_dsi->channel << CMD_MODE_CHANNEL_NUMBER_SHIFT;
|
|
val |= CMD_MODE_DATA_WIDTH_8_BIT; /* XXX */
|
|
} else {
|
|
val |= intel_dsi->channel << VID_MODE_CHANNEL_NUMBER_SHIFT;
|
|
|
|
/* XXX: cross-check bpp vs. pixel format? */
|
|
val |= intel_dsi->pixel_format;
|
|
}
|
|
I915_WRITE(MIPI_DSI_FUNC_PRG(pipe), val);
|
|
|
|
/* timeouts for recovery. one frame IIUC. if counter expires, EOT and
|
|
* stop state. */
|
|
|
|
/*
|
|
* In burst mode, value greater than one DPI line Time in byte clock
|
|
* (txbyteclkhs) To timeout this timer 1+ of the above said value is
|
|
* recommended.
|
|
*
|
|
* In non-burst mode, Value greater than one DPI frame time in byte
|
|
* clock(txbyteclkhs) To timeout this timer 1+ of the above said value
|
|
* is recommended.
|
|
*
|
|
* In DBI only mode, value greater than one DBI frame time in byte
|
|
* clock(txbyteclkhs) To timeout this timer 1+ of the above said value
|
|
* is recommended.
|
|
*/
|
|
|
|
if (is_vid_mode(intel_dsi) &&
|
|
intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
|
|
I915_WRITE(MIPI_HS_TX_TIMEOUT(pipe),
|
|
txbyteclkhs(adjusted_mode->htotal, bpp,
|
|
intel_dsi->lane_count) + 1);
|
|
} else {
|
|
I915_WRITE(MIPI_HS_TX_TIMEOUT(pipe),
|
|
txbyteclkhs(adjusted_mode->vtotal *
|
|
adjusted_mode->htotal,
|
|
bpp, intel_dsi->lane_count) + 1);
|
|
}
|
|
I915_WRITE(MIPI_LP_RX_TIMEOUT(pipe), intel_dsi->lp_rx_timeout);
|
|
I915_WRITE(MIPI_TURN_AROUND_TIMEOUT(pipe), intel_dsi->turn_arnd_val);
|
|
I915_WRITE(MIPI_DEVICE_RESET_TIMER(pipe), intel_dsi->rst_timer_val);
|
|
|
|
/* dphy stuff */
|
|
|
|
/* in terms of low power clock */
|
|
I915_WRITE(MIPI_INIT_COUNT(pipe), txclkesc(ESCAPE_CLOCK_DIVIDER_1, 100));
|
|
|
|
/* recovery disables */
|
|
I915_WRITE(MIPI_EOT_DISABLE(pipe), intel_dsi->eot_disable);
|
|
|
|
/* in terms of txbyteclkhs. actual high to low switch +
|
|
* MIPI_STOP_STATE_STALL * MIPI_LP_BYTECLK.
|
|
*
|
|
* XXX: write MIPI_STOP_STATE_STALL?
|
|
*/
|
|
I915_WRITE(MIPI_HIGH_LOW_SWITCH_COUNT(pipe),
|
|
intel_dsi->hs_to_lp_count);
|
|
|
|
/* XXX: low power clock equivalence in terms of byte clock. the number
|
|
* of byte clocks occupied in one low power clock. based on txbyteclkhs
|
|
* and txclkesc. txclkesc time / txbyteclk time * (105 +
|
|
* MIPI_STOP_STATE_STALL) / 105.???
|
|
*/
|
|
I915_WRITE(MIPI_LP_BYTECLK(pipe), intel_dsi->lp_byte_clk);
|
|
|
|
/* the bw essential for transmitting 16 long packets containing 252
|
|
* bytes meant for dcs write memory command is programmed in this
|
|
* register in terms of byte clocks. based on dsi transfer rate and the
|
|
* number of lanes configured the time taken to transmit 16 long packets
|
|
* in a dsi stream varies. */
|
|
I915_WRITE(MIPI_DBI_BW_CTRL(pipe), intel_dsi->bw_timer);
|
|
|
|
I915_WRITE(MIPI_CLK_LANE_SWITCH_TIME_CNT(pipe),
|
|
intel_dsi->clk_lp_to_hs_count << LP_HS_SSW_CNT_SHIFT |
|
|
intel_dsi->clk_hs_to_lp_count << HS_LP_PWR_SW_CNT_SHIFT);
|
|
|
|
if (is_vid_mode(intel_dsi))
|
|
I915_WRITE(MIPI_VIDEO_MODE_FORMAT(pipe),
|
|
intel_dsi->video_frmt_cfg_bits |
|
|
intel_dsi->video_mode_format);
|
|
}
|
|
|
|
static enum drm_connector_status
|
|
intel_dsi_detect(struct drm_connector *connector, bool force)
|
|
{
|
|
struct intel_dsi *intel_dsi = intel_attached_dsi(connector);
|
|
DRM_DEBUG_KMS("\n");
|
|
return intel_dsi->dev.dev_ops->detect(&intel_dsi->dev);
|
|
}
|
|
|
|
static int intel_dsi_get_modes(struct drm_connector *connector)
|
|
{
|
|
struct intel_connector *intel_connector = to_intel_connector(connector);
|
|
struct drm_display_mode *mode;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
if (!intel_connector->panel.fixed_mode) {
|
|
DRM_DEBUG_KMS("no fixed mode\n");
|
|
return 0;
|
|
}
|
|
|
|
mode = drm_mode_duplicate(connector->dev,
|
|
intel_connector->panel.fixed_mode);
|
|
if (!mode) {
|
|
DRM_DEBUG_KMS("drm_mode_duplicate failed\n");
|
|
return 0;
|
|
}
|
|
|
|
drm_mode_probed_add(connector, mode);
|
|
return 1;
|
|
}
|
|
|
|
static void intel_dsi_destroy(struct drm_connector *connector)
|
|
{
|
|
struct intel_connector *intel_connector = to_intel_connector(connector);
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
intel_panel_fini(&intel_connector->panel);
|
|
drm_connector_cleanup(connector);
|
|
kfree(connector);
|
|
}
|
|
|
|
static const struct drm_encoder_funcs intel_dsi_funcs = {
|
|
.destroy = intel_encoder_destroy,
|
|
};
|
|
|
|
static const struct drm_connector_helper_funcs intel_dsi_connector_helper_funcs = {
|
|
.get_modes = intel_dsi_get_modes,
|
|
.mode_valid = intel_dsi_mode_valid,
|
|
.best_encoder = intel_best_encoder,
|
|
};
|
|
|
|
static const struct drm_connector_funcs intel_dsi_connector_funcs = {
|
|
.dpms = intel_connector_dpms,
|
|
.detect = intel_dsi_detect,
|
|
.destroy = intel_dsi_destroy,
|
|
.fill_modes = drm_helper_probe_single_connector_modes,
|
|
};
|
|
|
|
bool intel_dsi_init(struct drm_device *dev)
|
|
{
|
|
struct intel_dsi *intel_dsi;
|
|
struct intel_encoder *intel_encoder;
|
|
struct drm_encoder *encoder;
|
|
struct intel_connector *intel_connector;
|
|
struct drm_connector *connector;
|
|
struct drm_display_mode *fixed_mode = NULL;
|
|
const struct intel_dsi_device *dsi;
|
|
unsigned int i;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
intel_dsi = kzalloc(sizeof(*intel_dsi), GFP_KERNEL);
|
|
if (!intel_dsi)
|
|
return false;
|
|
|
|
intel_connector = kzalloc(sizeof(*intel_connector), GFP_KERNEL);
|
|
if (!intel_connector) {
|
|
kfree(intel_dsi);
|
|
return false;
|
|
}
|
|
|
|
intel_encoder = &intel_dsi->base;
|
|
encoder = &intel_encoder->base;
|
|
intel_dsi->attached_connector = intel_connector;
|
|
|
|
connector = &intel_connector->base;
|
|
|
|
drm_encoder_init(dev, encoder, &intel_dsi_funcs, DRM_MODE_ENCODER_DSI);
|
|
|
|
/* XXX: very likely not all of these are needed */
|
|
intel_encoder->hot_plug = intel_dsi_hot_plug;
|
|
intel_encoder->compute_config = intel_dsi_compute_config;
|
|
intel_encoder->pre_pll_enable = intel_dsi_pre_pll_enable;
|
|
intel_encoder->pre_enable = intel_dsi_pre_enable;
|
|
intel_encoder->enable = intel_dsi_enable;
|
|
intel_encoder->mode_set = intel_dsi_mode_set;
|
|
intel_encoder->disable = intel_dsi_disable;
|
|
intel_encoder->post_disable = intel_dsi_post_disable;
|
|
intel_encoder->get_hw_state = intel_dsi_get_hw_state;
|
|
intel_encoder->get_config = intel_dsi_get_config;
|
|
|
|
intel_connector->get_hw_state = intel_connector_get_hw_state;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(intel_dsi_devices); i++) {
|
|
dsi = &intel_dsi_devices[i];
|
|
intel_dsi->dev = *dsi;
|
|
|
|
if (dsi->dev_ops->init(&intel_dsi->dev))
|
|
break;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(intel_dsi_devices)) {
|
|
DRM_DEBUG_KMS("no device found\n");
|
|
goto err;
|
|
}
|
|
|
|
intel_encoder->type = INTEL_OUTPUT_DSI;
|
|
intel_encoder->crtc_mask = (1 << 0); /* XXX */
|
|
|
|
intel_encoder->cloneable = false;
|
|
drm_connector_init(dev, connector, &intel_dsi_connector_funcs,
|
|
DRM_MODE_CONNECTOR_DSI);
|
|
|
|
drm_connector_helper_add(connector, &intel_dsi_connector_helper_funcs);
|
|
|
|
connector->display_info.subpixel_order = SubPixelHorizontalRGB; /*XXX*/
|
|
connector->interlace_allowed = false;
|
|
connector->doublescan_allowed = false;
|
|
|
|
intel_connector_attach_encoder(intel_connector, intel_encoder);
|
|
|
|
drm_sysfs_connector_add(connector);
|
|
|
|
fixed_mode = dsi->dev_ops->get_modes(&intel_dsi->dev);
|
|
if (!fixed_mode) {
|
|
DRM_DEBUG_KMS("no fixed mode\n");
|
|
goto err;
|
|
}
|
|
|
|
fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
|
|
intel_panel_init(&intel_connector->panel, fixed_mode);
|
|
|
|
return true;
|
|
|
|
err:
|
|
drm_encoder_cleanup(&intel_encoder->base);
|
|
kfree(intel_dsi);
|
|
kfree(intel_connector);
|
|
|
|
return false;
|
|
}
|