linux_dsm_epyc7002/drivers/gpu/drm/i915/gt/intel_sseu.c
Stuart Summers 100f5f7fbc drm/i915: Expand subslice mask
Currently, the subslice_mask runtime parameter is stored as an
array of subslices per slice. Expand the subslice mask array to
better match what is presented to userspace through the
I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is
then calculated:
  slice * subslice stride + subslice index / 8

v2: Fix 32-bit build
v3: Use new helper function in SSEU workaround warning message
v4: Use GEM_BUG_ON to force developers to use valid SSEU configurations
    per platform (Chris)

Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-12-stuart.summers@intel.com
2019-08-23 19:14:27 +01:00

195 lines
5.0 KiB
C

/*
* SPDX-License-Identifier: MIT
*
* Copyright © 2019 Intel Corporation
*/
#include "i915_drv.h"
#include "intel_lrc_reg.h"
#include "intel_sseu.h"
void intel_sseu_set_info(struct sseu_dev_info *sseu, u8 max_slices,
u8 max_subslices, u8 max_eus_per_subslice)
{
sseu->max_slices = max_slices;
sseu->max_subslices = max_subslices;
sseu->max_eus_per_subslice = max_eus_per_subslice;
sseu->ss_stride = GEN_SSEU_STRIDE(sseu->max_subslices);
GEM_BUG_ON(sseu->ss_stride > GEN_MAX_SUBSLICE_STRIDE);
sseu->eu_stride = GEN_SSEU_STRIDE(sseu->max_eus_per_subslice);
GEM_BUG_ON(sseu->eu_stride > GEN_MAX_EU_STRIDE);
}
unsigned int
intel_sseu_subslice_total(const struct sseu_dev_info *sseu)
{
unsigned int i, total = 0;
for (i = 0; i < ARRAY_SIZE(sseu->subslice_mask); i++)
total += hweight8(sseu->subslice_mask[i]);
return total;
}
u32 intel_sseu_get_subslices(const struct sseu_dev_info *sseu, u8 slice)
{
int i, offset = slice * sseu->ss_stride;
u32 mask = 0;
GEM_BUG_ON(slice >= sseu->max_slices);
for (i = 0; i < sseu->ss_stride; i++)
mask |= (u32)sseu->subslice_mask[offset + i] <<
i * BITS_PER_BYTE;
return mask;
}
void intel_sseu_set_subslices(struct sseu_dev_info *sseu, int slice,
u32 ss_mask)
{
int offset = slice * sseu->ss_stride;
memcpy(&sseu->subslice_mask[offset], &ss_mask, sseu->ss_stride);
}
unsigned int
intel_sseu_subslices_per_slice(const struct sseu_dev_info *sseu, u8 slice)
{
return hweight32(intel_sseu_get_subslices(sseu, slice));
}
u32 intel_sseu_make_rpcs(struct drm_i915_private *i915,
const struct intel_sseu *req_sseu)
{
const struct sseu_dev_info *sseu = &RUNTIME_INFO(i915)->sseu;
bool subslice_pg = sseu->has_subslice_pg;
struct intel_sseu ctx_sseu;
u8 slices, subslices;
u32 rpcs = 0;
/*
* No explicit RPCS request is needed to ensure full
* slice/subslice/EU enablement prior to Gen9.
*/
if (INTEL_GEN(i915) < 9)
return 0;
/*
* If i915/perf is active, we want a stable powergating configuration
* on the system.
*
* We could choose full enablement, but on ICL we know there are use
* cases which disable slices for functional, apart for performance
* reasons. So in this case we select a known stable subset.
*/
if (!i915->perf.exclusive_stream) {
ctx_sseu = *req_sseu;
} else {
ctx_sseu = intel_sseu_from_device_info(sseu);
if (IS_GEN(i915, 11)) {
/*
* We only need subslice count so it doesn't matter
* which ones we select - just turn off low bits in the
* amount of half of all available subslices per slice.
*/
ctx_sseu.subslice_mask =
~(~0 << (hweight8(ctx_sseu.subslice_mask) / 2));
ctx_sseu.slice_mask = 0x1;
}
}
slices = hweight8(ctx_sseu.slice_mask);
subslices = hweight8(ctx_sseu.subslice_mask);
/*
* Since the SScount bitfield in GEN8_R_PWR_CLK_STATE is only three bits
* wide and Icelake has up to eight subslices, specfial programming is
* needed in order to correctly enable all subslices.
*
* According to documentation software must consider the configuration
* as 2x4x8 and hardware will translate this to 1x8x8.
*
* Furthemore, even though SScount is three bits, maximum documented
* value for it is four. From this some rules/restrictions follow:
*
* 1.
* If enabled subslice count is greater than four, two whole slices must
* be enabled instead.
*
* 2.
* When more than one slice is enabled, hardware ignores the subslice
* count altogether.
*
* From these restrictions it follows that it is not possible to enable
* a count of subslices between the SScount maximum of four restriction,
* and the maximum available number on a particular SKU. Either all
* subslices are enabled, or a count between one and four on the first
* slice.
*/
if (IS_GEN(i915, 11) &&
slices == 1 &&
subslices > min_t(u8, 4, hweight8(sseu->subslice_mask[0]) / 2)) {
GEM_BUG_ON(subslices & 1);
subslice_pg = false;
slices *= 2;
}
/*
* Starting in Gen9, render power gating can leave
* slice/subslice/EU in a partially enabled state. We
* must make an explicit request through RPCS for full
* enablement.
*/
if (sseu->has_slice_pg) {
u32 mask, val = slices;
if (INTEL_GEN(i915) >= 11) {
mask = GEN11_RPCS_S_CNT_MASK;
val <<= GEN11_RPCS_S_CNT_SHIFT;
} else {
mask = GEN8_RPCS_S_CNT_MASK;
val <<= GEN8_RPCS_S_CNT_SHIFT;
}
GEM_BUG_ON(val & ~mask);
val &= mask;
rpcs |= GEN8_RPCS_ENABLE | GEN8_RPCS_S_CNT_ENABLE | val;
}
if (subslice_pg) {
u32 val = subslices;
val <<= GEN8_RPCS_SS_CNT_SHIFT;
GEM_BUG_ON(val & ~GEN8_RPCS_SS_CNT_MASK);
val &= GEN8_RPCS_SS_CNT_MASK;
rpcs |= GEN8_RPCS_ENABLE | GEN8_RPCS_SS_CNT_ENABLE | val;
}
if (sseu->has_eu_pg) {
u32 val;
val = ctx_sseu.min_eus_per_subslice << GEN8_RPCS_EU_MIN_SHIFT;
GEM_BUG_ON(val & ~GEN8_RPCS_EU_MIN_MASK);
val &= GEN8_RPCS_EU_MIN_MASK;
rpcs |= val;
val = ctx_sseu.max_eus_per_subslice << GEN8_RPCS_EU_MAX_SHIFT;
GEM_BUG_ON(val & ~GEN8_RPCS_EU_MAX_MASK);
val &= GEN8_RPCS_EU_MAX_MASK;
rpcs |= val;
rpcs |= GEN8_RPCS_ENABLE;
}
return rpcs;
}