linux_dsm_epyc7002/drivers/input/misc
Linus Torvalds 2bd8040174 This is the bulk of GPIO changes for the v4.12 kernel cycle:
Core changes
 
 - Return NULL from gpiod_get_optional() when GPIOLIB is disabled.
   This was a much discussed change. It affects use cases where people
   write drivers that might or might not be using GPIO resources.
   I have decided that this is the lesser evil right now.
 
 - Make gpiod_count() behave consistently across different hardware
   descriptions.
 
 - Fix the syntax around open drain/open source to not infer active
   high/low semantics.
 
 New drivers
 
 - A new single-register fixed-direction framework driver for hardware
   that have lines controlled by a single register that just work in
   one direction (out or in), including IRQ support.
 
 - Support the Fintek F71889A GPIO SuperIO controller.
 
 - Support the National NI 169445 MMIO GPIO.
 
 - Support for the X-Gene derivative of the DWC GPIO controller
 
 - Support for the Rohm BD9571MWV-M PMIC GPIO controller.
 
 - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver
   and replace both the Gemini and the Moxa ART custom drivers with
   this driver.
 
 Driver improvements
 
 - A whole slew of drivers have their spinlocks chaned to raw spinlocks
   as they provide irqchips, and thus we are progressing on realtime
   compliance.
 
 - Use devm_irq_alloc_descs() in a slew of drivers, getting managed
   resources.
 
 - Support for the embedded PWM controller inside the MVEBU driver.
 
 - Debounce, open source and open drain support for the Aspeed driver.
 
 - Misc smaller fixes like spelling and syntax and whatnot.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZCusBAAoJEEEQszewGV1zengP/i3YgmSXJdaf26t/NxG3klU3
 qx3akdQ3gEQ6BOlIY7Ew+b6qgMJynYNZa1trZgqTgLxPEKWjidyCgz+LHQ0OY+ir
 a7x6wr+gBj5WlgV+nBjVs4l6W8pVKCfnap/04OPEQDpxZOHs2LU5pqxxUZ9AxkKS
 urDFMDX55baFviQ+xAuHgamok87YoGP36A/e/fHIBepZmnochf0mCcPfIh0t8lRh
 s2x29PN5ZFRkl403RzjZfVCEMr9bMnSqmDquvPO++Kq0bL+3rOhuMErocd1Bg8ao
 LxBktkryujTaw699xK7Rq5SwcnOAPpaBY4NTmwsIJvAJuCh7qLy9JxQSBsSOT2bx
 61NWUt5T/Xsi0ECYZM4YvsNpUP6XrpSTyG3c8T3fY9vXYLNKZBv1ht6OODpLeuke
 DxULAWP+DdzUS8a3qfKQvIJzSTloU31a1MBG58DWNJ072EQfa2YNaVE75VQk/z5/
 0xZbSHdPY/0Xgx8ltpKu37bSO676JiVQZZ1HEAuti4h21+USYueYD2L8/Bx4k9e/
 4UaOcw3MaCDHP/sf5hg17kQBjhhS0lV9Zv6H9QbHZUocJTJlIU+vXtgkQlrfi3n8
 8j5m+ywVarmLtPqg1j2rqcw7LBCPe0qRXH3e5X/YmNMc3rH9bQz4cTo8ZSN9r8zS
 c17zGbbAqlGsBkpFAbQz
 =DGPb
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.12 kernel cycle.

  Core changes:

   - Return NULL from gpiod_get_optional() when GPIOLIB is disabled.
     This was a much discussed change. It affects use cases where people
     write drivers that might or might not be using GPIO resources. I
     have decided that this is the lesser evil right now.

   - Make gpiod_count() behave consistently across different hardware
     descriptions.

   - Fix the syntax around open drain/open source to not infer active
     high/low semantics.

  New drivers:

   - A new single-register fixed-direction framework driver for hardware
     that have lines controlled by a single register that just work in
     one direction (out or in), including IRQ support.

   - Support the Fintek F71889A GPIO SuperIO controller.

   - Support the National NI 169445 MMIO GPIO.

   - Support for the X-Gene derivative of the DWC GPIO controller

   - Support for the Rohm BD9571MWV-M PMIC GPIO controller.

   - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver
     and replace both the Gemini and the Moxa ART custom drivers with
     this driver.

  Driver improvements:

   - A whole slew of drivers have their spinlocks chaned to raw
     spinlocks as they provide irqchips, and thus we are progressing on
     realtime compliance.

   - Use devm_irq_alloc_descs() in a slew of drivers, getting managed
     resources.

   - Support for the embedded PWM controller inside the MVEBU driver.

   - Debounce, open source and open drain support for the Aspeed driver.

   - Misc smaller fixes like spelling and syntax and whatnot"

* tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
  gpio: f7188x: Add a missing break
  gpio: omap: return error if requested debounce time is not possible
  gpio: Add ROHM BD9571MWV-M PMIC GPIO driver
  gpio: gpio-wcove: fix GPIO IRQ status mask
  gpio: DT bindings, move tca9554 from pcf857x to pca953x
  gpio: move tca9554 from pcf857x to pca953x
  gpio: arizona: Correct check whether the pin is an input
  gpio: Add XRA1403 DTS binding documentation
  dt-bindings: add exar to vendor prefixes list
  gpio: gpio-wcove: fix irq pending status bit width
  gpio: dwapb: use dwapb_read instead of readl_relaxed
  gpio: aspeed: Add open-source and open-drain support
  gpio: aspeed: Add debounce support
  gpio: aspeed: dt: Add optional clocks property
  gpio: aspeed: dt: Fix description alignment in bindings document
  gpio: mvebu: Add limited PWM support
  gpio: Use unsigned int for interrupt numbers
  gpio: f7188x: Add F71889A GPIO support.
  gpio: core: Decouple open drain/source flag with active low/high
  gpio: arizona: Correct handling for reading input GPIOs
  ...
2017-05-04 12:05:32 -07:00
..
88pm80x_onkey.c Input: misc - drop unnecessary calls to device_init_wakeup 2017-01-21 23:53:21 -08:00
88pm860x_onkey.c
ab8500-ponkey.c Input: ab8500-ponkey - drop unnecessary call to platform_set_drvdata 2017-01-18 11:49:19 -08:00
ad714x-i2c.c
ad714x-spi.c
ad714x.c
ad714x.h
adxl34x-i2c.c Input: adxl34x - make it enumerable in ACPI environment 2017-01-03 12:33:12 -08:00
adxl34x-spi.c
adxl34x.c
adxl34x.h
apanel.c Input: convert remaining uses of pr_warning to pr_warn 2017-03-17 17:25:02 -07:00
arizona-haptics.c Linux 4.10-rc5 2017-01-24 12:37:43 -08:00
ati_remote2.c
atlas_btns.c Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
atmel_captouch.c Input: misc - drop calls to platform_set_drvdata and i2c_set_clientdata 2017-01-21 23:51:51 -08:00
axp20x-pek.c Input: axp20x-pek - do not register input device on some systems 2017-03-09 10:01:03 -08:00
bfin_rotary.c Input: bfin_rotary - switch to using devm_add_action_or_reset() 2017-01-18 11:49:11 -08:00
bma150.c Input: bma150 - remove support for bma150 2017-04-01 11:44:53 -07:00
cm109.c Input: cm109 - validate number of endpoints before using them 2017-03-16 13:56:50 -07:00
cma3000_d0x_i2c.c
cma3000_d0x.c
cma3000_d0x.h
cobalt_btns.c
cpcap-pwrbutton.c input: cpcap-pwrbutton: New driver 2017-04-11 15:18:09 +01:00
da9052_onkey.c
da9055_onkey.c
da9063_onkey.c Input: misc - drop calls to platform_set_drvdata and i2c_set_clientdata 2017-01-21 23:51:51 -08:00
dm355evm_keys.c Input: dm355evm_keys - switch to using managed resources 2017-03-09 10:06:19 -08:00
drv260x.c Input: drv260x - remove OF dependency 2017-03-09 10:00:14 -08:00
drv2665.c Input: drv2665 - fix misuse of regmap_update_bits 2016-11-30 09:03:44 -08:00
drv2667.c Input: drv2667 - fix misuse of regmap_update_bits 2016-11-30 09:03:45 -08:00
e3x0-button.c Input: misc - drop empty remove functions 2017-01-21 23:53:34 -08:00
gp2ap002a00f.c Input: misc - drop unnecessary calls to device_init_wakeup 2017-01-21 23:53:21 -08:00
gpio_decoder.c Input: gpio_decoder - drop unnecessary call to platform_set_drvdata 2017-01-18 11:49:13 -08:00
gpio_tilt_polled.c Input: misc - use local variables consistently 2017-01-21 23:51:56 -08:00
gpio-beeper.c
hisi_powerkey.c Input: misc - drop empty remove functions 2017-01-21 23:53:34 -08:00
hp_sdc_rtc.c
ideapad_slidebar.c
ims-pcu.c Input: ims-pcu - validate number of endpoints before using them 2017-03-16 13:56:51 -07:00
ixp4xx-beeper.c
Kconfig Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2017-05-03 12:38:20 -07:00
keyspan_remote.c
kxtj9.c
m68kspkr.c
Makefile input: cpcap-pwrbutton: New driver 2017-04-11 15:18:09 +01:00
max8925_onkey.c
max8997_haptic.c pwm: Changes for v4.7-rc1 2016-05-25 10:40:15 -07:00
max77693-haptic.c Linux 4.8 2016-10-13 17:25:40 -07:00
mc13783-pwrbutton.c
mma8450.c Input: mma8450 - drop unnecessary call to i2c_set_clientdata 2017-01-18 11:49:14 -08:00
palmas-pwrbutton.c
pcap_keys.c
pcf8574_keypad.c
pcf50633-input.c
pcspkr.c
pm8xxx-vibrator.c Input: pm8xxx-vib - add support for pm8916's vibrator 2017-04-05 08:52:39 -07:00
pm8941-pwrkey.c Input: misc - drop unnecessary calls to device_init_wakeup 2017-01-21 23:53:21 -08:00
pmic8xxx-pwrkey.c Input: misc - drop empty remove functions 2017-01-21 23:53:34 -08:00
powermate.c
pwm-beeper.c Input: pwm-beeper - support customized freq for SND_BELL 2017-03-07 10:39:23 -08:00
rb532_button.c
regulator-haptic.c Input: regulator-haptic - fix spelling mistake: "dveice" -> "device" 2016-06-23 10:43:57 -07:00
retu-pwrbutton.c Input: misc - drop empty remove functions 2017-01-21 23:53:34 -08:00
rotary_encoder.c Input: rotary_encoder - support binary encoding of states 2016-07-27 18:26:10 -07:00
sgi_btns.c
sirfsoc-onkey.c Input: misc - drop empty remove functions 2017-01-21 23:53:34 -08:00
soc_button_array.c This is the bulk of GPIO changes for the v4.12 kernel cycle: 2017-05-04 12:05:32 -07:00
sparcspkr.c
tps65218-pwrbutton.c Linux 4.10-rc5 2017-01-24 12:37:43 -08:00
twl4030-pwrbutton.c Input: twl4030-pwrbutton - use input_set_capability() helper 2017-05-01 09:29:08 -07:00
twl4030-vibra.c
twl6040-vibra.c Merge branch 'next' into for-linus 2016-05-16 17:25:08 -07:00
uinput.c Input: uinput - fix crash when mixing old and new init style 2017-02-01 10:33:11 -08:00
wistron_btns.c Input: wistron_btns - remove use of sparse_keymap_free 2017-03-09 10:06:12 -08:00
wm831x-on.c
xen-kbdfront.c Input: xen-kbdfront - add module parameter for setting resolution 2017-04-19 09:02:43 -07:00
yealink.c Input: yealink - validate number of endpoints before using them 2017-03-16 13:56:52 -07:00
yealink.h Input: yealink - define packet offset __be16 instead of u16 2017-04-10 20:41:41 -07:00