mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
1cb17866f0
Document DT binding for Hisilicon Hi6220 mailbox driver. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
75 lines
2.3 KiB
Plaintext
75 lines
2.3 KiB
Plaintext
Hisilicon Hi6220 Mailbox Driver
|
|
===============================
|
|
|
|
Hisilicon Hi6220 mailbox supports up to 32 channels. Each channel
|
|
is unidirectional with a maximum message size of 8 words. I/O is
|
|
performed using register access (there is no DMA) and the cell
|
|
raises an interrupt when messages are received.
|
|
|
|
Mailbox Device Node:
|
|
====================
|
|
|
|
Required properties:
|
|
--------------------
|
|
- compatible: Shall be "hisilicon,hi6220-mbox"
|
|
- reg: Contains the mailbox register address range (base
|
|
address and length); the first item is for IPC
|
|
registers, the second item is shared buffer for
|
|
slots.
|
|
- #mbox-cells: Common mailbox binding property to identify the number
|
|
of cells required for the mailbox specifier. Must be 3.
|
|
<&phandle slot_id dst_irq ack_irq>
|
|
phandle: Label name of mailbox controller
|
|
slot_id: Slot id used either for TX or RX
|
|
dst_irq: IRQ identifier index number which used by MCU
|
|
ack_irq: IRQ identifier index number with generating a
|
|
TX/RX interrupt to application processor,
|
|
mailbox driver uses it to acknowledge interrupt
|
|
- interrupts: Contains the interrupt information for the mailbox
|
|
device. The format is dependent on which interrupt
|
|
controller the SoCs use.
|
|
|
|
Optional Properties:
|
|
--------------------
|
|
- hi6220,mbox-tx-noirq: Property of MCU firmware's feature, so mailbox driver
|
|
use this flag to ask MCU to enable "automatic idle
|
|
flag" mode or IRQ generated mode to acknowledge a TX
|
|
completion.
|
|
|
|
Example:
|
|
--------
|
|
|
|
mailbox: mailbox@f7510000 {
|
|
compatible = "hisilicon,hi6220-mbox";
|
|
reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */
|
|
<0x0 0x06dff800 0x0 0x0800>; /* Mailbox */
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
|
#mbox-cells = <3>;
|
|
};
|
|
|
|
|
|
Mailbox client
|
|
===============
|
|
|
|
Required properties:
|
|
--------------------
|
|
- compatible: Many (See the client docs).
|
|
- mboxes: Standard property to specify a Mailbox (See ./mailbox.txt)
|
|
Cells must match 'mbox-cells' (See Mailbox Device Node above).
|
|
|
|
Optional Properties:
|
|
--------------------
|
|
- mbox-names: Name given to channels seen in the 'mboxes' property.
|
|
|
|
Example:
|
|
--------
|
|
|
|
stub_clock: stub_clock {
|
|
compatible = "hisilicon,hi6220-stub-clk";
|
|
hisilicon,hi6220-clk-sram = <&sram>;
|
|
#clock-cells = <1>;
|
|
mbox-names = "mbox-tx", "mbox-rx";
|
|
mboxes = <&mailbox 1 0 11>, <&mailbox 0 1 10>;
|
|
};
|