mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 16:27:39 +07:00
c0a4b9ec1b
Simplify code and reduce code size by using the new hwmon registration API. Other changes: - Convert to use regmap, and drop local caching. This avoids reading registers unnecessarily, and uses regmap for caching of non-volatile registers. - Add support for temp2_max, temp2_max_alarm, temp2_max_hyst, and temp2_offset. - Order include files alphabetically - Drop FSF address - Check errors from register read and write functions and report to userspace. - Accept negative hysteresis values. While unlikely, a maximum limit _can_ be set to a value smaller than 31 degrees C, which makes negative hysteresis values possible. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
641 lines
16 KiB
C
641 lines
16 KiB
C
/*
|
|
* Copyright (C) 2011 Alexander Stein <alexander.stein@systec-electronic.com>
|
|
*
|
|
* The LM95245 is a sensor chip made by TI / National Semiconductor.
|
|
* It reports up to two temperatures (its own plus an external one).
|
|
*
|
|
* This driver is based on lm95241.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
|
|
static const unsigned short normal_i2c[] = {
|
|
0x18, 0x19, 0x29, 0x4c, 0x4d, I2C_CLIENT_END };
|
|
|
|
/* LM95245 registers */
|
|
/* general registers */
|
|
#define LM95245_REG_RW_CONFIG1 0x03
|
|
#define LM95245_REG_RW_CONVERS_RATE 0x04
|
|
#define LM95245_REG_W_ONE_SHOT 0x0F
|
|
|
|
/* diode configuration */
|
|
#define LM95245_REG_RW_CONFIG2 0xBF
|
|
#define LM95245_REG_RW_REMOTE_OFFH 0x11
|
|
#define LM95245_REG_RW_REMOTE_OFFL 0x12
|
|
|
|
/* status registers */
|
|
#define LM95245_REG_R_STATUS1 0x02
|
|
#define LM95245_REG_R_STATUS2 0x33
|
|
|
|
/* limit registers */
|
|
#define LM95245_REG_RW_REMOTE_OS_LIMIT 0x07
|
|
#define LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT 0x20
|
|
#define LM95245_REG_RW_REMOTE_TCRIT_LIMIT 0x19
|
|
#define LM95245_REG_RW_COMMON_HYSTERESIS 0x21
|
|
|
|
/* temperature signed */
|
|
#define LM95245_REG_R_LOCAL_TEMPH_S 0x00
|
|
#define LM95245_REG_R_LOCAL_TEMPL_S 0x30
|
|
#define LM95245_REG_R_REMOTE_TEMPH_S 0x01
|
|
#define LM95245_REG_R_REMOTE_TEMPL_S 0x10
|
|
/* temperature unsigned */
|
|
#define LM95245_REG_R_REMOTE_TEMPH_U 0x31
|
|
#define LM95245_REG_R_REMOTE_TEMPL_U 0x32
|
|
|
|
/* id registers */
|
|
#define LM95245_REG_R_MAN_ID 0xFE
|
|
#define LM95245_REG_R_CHIP_ID 0xFF
|
|
|
|
/* LM95245 specific bitfields */
|
|
#define CFG_STOP 0x40
|
|
#define CFG_REMOTE_TCRIT_MASK 0x10
|
|
#define CFG_REMOTE_OS_MASK 0x08
|
|
#define CFG_LOCAL_TCRIT_MASK 0x04
|
|
#define CFG_LOCAL_OS_MASK 0x02
|
|
|
|
#define CFG2_OS_A0 0x40
|
|
#define CFG2_DIODE_FAULT_OS 0x20
|
|
#define CFG2_DIODE_FAULT_TCRIT 0x10
|
|
#define CFG2_REMOTE_TT 0x08
|
|
#define CFG2_REMOTE_FILTER_DIS 0x00
|
|
#define CFG2_REMOTE_FILTER_EN 0x06
|
|
|
|
/* conversation rate in ms */
|
|
#define RATE_CR0063 0x00
|
|
#define RATE_CR0364 0x01
|
|
#define RATE_CR1000 0x02
|
|
#define RATE_CR2500 0x03
|
|
|
|
#define STATUS1_ROS 0x10
|
|
#define STATUS1_DIODE_FAULT 0x04
|
|
#define STATUS1_RTCRIT 0x02
|
|
#define STATUS1_LOC 0x01
|
|
|
|
#define MANUFACTURER_ID 0x01
|
|
#define LM95235_REVISION 0xB1
|
|
#define LM95245_REVISION 0xB3
|
|
|
|
static const u8 lm95245_reg_address[] = {
|
|
LM95245_REG_R_LOCAL_TEMPH_S,
|
|
LM95245_REG_R_LOCAL_TEMPL_S,
|
|
LM95245_REG_R_REMOTE_TEMPH_S,
|
|
LM95245_REG_R_REMOTE_TEMPL_S,
|
|
LM95245_REG_R_REMOTE_TEMPH_U,
|
|
LM95245_REG_R_REMOTE_TEMPL_U,
|
|
LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT,
|
|
LM95245_REG_RW_REMOTE_TCRIT_LIMIT,
|
|
LM95245_REG_RW_COMMON_HYSTERESIS,
|
|
LM95245_REG_R_STATUS1,
|
|
};
|
|
|
|
/* Client data (each client gets its own) */
|
|
struct lm95245_data {
|
|
struct regmap *regmap;
|
|
struct mutex update_lock;
|
|
int interval; /* in msecs */
|
|
};
|
|
|
|
/* Conversions */
|
|
static int temp_from_reg_unsigned(u8 val_h, u8 val_l)
|
|
{
|
|
return val_h * 1000 + val_l * 1000 / 256;
|
|
}
|
|
|
|
static int temp_from_reg_signed(u8 val_h, u8 val_l)
|
|
{
|
|
if (val_h & 0x80)
|
|
return (val_h - 0x100) * 1000;
|
|
return temp_from_reg_unsigned(val_h, val_l);
|
|
}
|
|
|
|
static int lm95245_read_conversion_rate(struct lm95245_data *data)
|
|
{
|
|
unsigned int rate;
|
|
int ret;
|
|
|
|
ret = regmap_read(data->regmap, LM95245_REG_RW_CONVERS_RATE, &rate);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
switch (rate) {
|
|
case RATE_CR0063:
|
|
data->interval = 63;
|
|
break;
|
|
case RATE_CR0364:
|
|
data->interval = 364;
|
|
break;
|
|
case RATE_CR1000:
|
|
data->interval = 1000;
|
|
break;
|
|
case RATE_CR2500:
|
|
default:
|
|
data->interval = 2500;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int lm95245_set_conversion_rate(struct lm95245_data *data, long interval)
|
|
{
|
|
int ret, rate;
|
|
|
|
if (interval <= 63) {
|
|
interval = 63;
|
|
rate = RATE_CR0063;
|
|
} else if (interval <= 364) {
|
|
interval = 364;
|
|
rate = RATE_CR0364;
|
|
} else if (interval <= 1000) {
|
|
interval = 1000;
|
|
rate = RATE_CR1000;
|
|
} else {
|
|
interval = 2500;
|
|
rate = RATE_CR2500;
|
|
}
|
|
|
|
ret = regmap_write(data->regmap, LM95245_REG_RW_CONVERS_RATE, rate);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
data->interval = interval;
|
|
return 0;
|
|
}
|
|
|
|
static int lm95245_read_temp(struct device *dev, u32 attr, int channel,
|
|
long *val)
|
|
{
|
|
struct lm95245_data *data = dev_get_drvdata(dev);
|
|
struct regmap *regmap = data->regmap;
|
|
int ret, regl, regh, regvall, regvalh;
|
|
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
regl = channel ? LM95245_REG_R_REMOTE_TEMPL_S :
|
|
LM95245_REG_R_LOCAL_TEMPL_S;
|
|
regh = channel ? LM95245_REG_R_REMOTE_TEMPH_S :
|
|
LM95245_REG_R_LOCAL_TEMPH_S;
|
|
ret = regmap_read(regmap, regl, ®vall);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = regmap_read(regmap, regh, ®valh);
|
|
if (ret < 0)
|
|
return ret;
|
|
/*
|
|
* Local temp is always signed.
|
|
* Remote temp has both signed and unsigned data.
|
|
* Use signed calculation for remote if signed bit is set
|
|
* or if reported temperature is below signed limit.
|
|
*/
|
|
if (!channel || (regvalh & 0x80) || regvalh < 0x7f) {
|
|
*val = temp_from_reg_signed(regvalh, regvall);
|
|
return 0;
|
|
}
|
|
ret = regmap_read(regmap, LM95245_REG_R_REMOTE_TEMPL_U,
|
|
®vall);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = regmap_read(regmap, LM95245_REG_R_REMOTE_TEMPH_U,
|
|
®valh);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = temp_from_reg_unsigned(regvalh, regvall);
|
|
return 0;
|
|
case hwmon_temp_max:
|
|
ret = regmap_read(regmap, LM95245_REG_RW_REMOTE_OS_LIMIT,
|
|
®valh);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = regvalh * 1000;
|
|
return 0;
|
|
case hwmon_temp_crit:
|
|
regh = channel ? LM95245_REG_RW_REMOTE_TCRIT_LIMIT :
|
|
LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT;
|
|
ret = regmap_read(regmap, regh, ®valh);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = regvalh * 1000;
|
|
return 0;
|
|
case hwmon_temp_max_hyst:
|
|
ret = regmap_read(regmap, LM95245_REG_RW_REMOTE_OS_LIMIT,
|
|
®valh);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = regmap_read(regmap, LM95245_REG_RW_COMMON_HYSTERESIS,
|
|
®vall);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = (regvalh - regvall) * 1000;
|
|
return 0;
|
|
case hwmon_temp_crit_hyst:
|
|
regh = channel ? LM95245_REG_RW_REMOTE_TCRIT_LIMIT :
|
|
LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT;
|
|
ret = regmap_read(regmap, regh, ®valh);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = regmap_read(regmap, LM95245_REG_RW_COMMON_HYSTERESIS,
|
|
®vall);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = (regvalh - regvall) * 1000;
|
|
return 0;
|
|
case hwmon_temp_type:
|
|
ret = regmap_read(regmap, LM95245_REG_RW_CONFIG2, ®valh);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = (regvalh & CFG2_REMOTE_TT) ? 1 : 2;
|
|
return 0;
|
|
case hwmon_temp_offset:
|
|
ret = regmap_read(regmap, LM95245_REG_RW_REMOTE_OFFL,
|
|
®vall);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = regmap_read(regmap, LM95245_REG_RW_REMOTE_OFFH,
|
|
®valh);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = temp_from_reg_signed(regvalh, regvall);
|
|
return 0;
|
|
case hwmon_temp_max_alarm:
|
|
ret = regmap_read(regmap, LM95245_REG_R_STATUS1, ®valh);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = !!(regvalh & STATUS1_ROS);
|
|
return 0;
|
|
case hwmon_temp_crit_alarm:
|
|
ret = regmap_read(regmap, LM95245_REG_R_STATUS1, ®valh);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = !!(regvalh & (channel ? STATUS1_RTCRIT : STATUS1_LOC));
|
|
return 0;
|
|
case hwmon_temp_fault:
|
|
ret = regmap_read(regmap, LM95245_REG_R_STATUS1, ®valh);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = !!(regvalh & STATUS1_DIODE_FAULT);
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int lm95245_write_temp(struct device *dev, u32 attr, int channel,
|
|
long val)
|
|
{
|
|
struct lm95245_data *data = dev_get_drvdata(dev);
|
|
struct regmap *regmap = data->regmap;
|
|
unsigned int regval;
|
|
int ret, reg;
|
|
|
|
switch (attr) {
|
|
case hwmon_temp_max:
|
|
val = clamp_val(val / 1000, 0, 255);
|
|
ret = regmap_write(regmap, LM95245_REG_RW_REMOTE_OS_LIMIT, val);
|
|
return ret;
|
|
case hwmon_temp_crit:
|
|
reg = channel ? LM95245_REG_RW_REMOTE_TCRIT_LIMIT :
|
|
LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT;
|
|
val = clamp_val(val / 1000, 0, channel ? 255 : 127);
|
|
ret = regmap_write(regmap, reg, val);
|
|
return ret;
|
|
case hwmon_temp_crit_hyst:
|
|
mutex_lock(&data->update_lock);
|
|
ret = regmap_read(regmap, LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT,
|
|
®val);
|
|
if (ret < 0) {
|
|
mutex_unlock(&data->update_lock);
|
|
return ret;
|
|
}
|
|
/* Clamp to reasonable range to prevent overflow */
|
|
val = clamp_val(val, -1000000, 1000000);
|
|
val = regval - val / 1000;
|
|
val = clamp_val(val, 0, 31);
|
|
ret = regmap_write(regmap, LM95245_REG_RW_COMMON_HYSTERESIS,
|
|
val);
|
|
mutex_unlock(&data->update_lock);
|
|
return ret;
|
|
case hwmon_temp_offset:
|
|
val = clamp_val(val, -128000, 127875);
|
|
val = val * 256 / 1000;
|
|
mutex_lock(&data->update_lock);
|
|
ret = regmap_write(regmap, LM95245_REG_RW_REMOTE_OFFL,
|
|
val & 0xe0);
|
|
if (ret < 0) {
|
|
mutex_unlock(&data->update_lock);
|
|
return ret;
|
|
}
|
|
ret = regmap_write(regmap, LM95245_REG_RW_REMOTE_OFFH,
|
|
(val >> 8) & 0xff);
|
|
mutex_unlock(&data->update_lock);
|
|
return ret;
|
|
case hwmon_temp_type:
|
|
if (val != 1 && val != 2)
|
|
return -EINVAL;
|
|
ret = regmap_update_bits(regmap, LM95245_REG_RW_CONFIG2,
|
|
CFG2_REMOTE_TT,
|
|
val == 1 ? CFG2_REMOTE_TT : 0);
|
|
return ret;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int lm95245_read_chip(struct device *dev, u32 attr, int channel,
|
|
long *val)
|
|
{
|
|
struct lm95245_data *data = dev_get_drvdata(dev);
|
|
|
|
switch (attr) {
|
|
case hwmon_chip_update_interval:
|
|
*val = data->interval;
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int lm95245_write_chip(struct device *dev, u32 attr, int channel,
|
|
long val)
|
|
{
|
|
struct lm95245_data *data = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
switch (attr) {
|
|
case hwmon_chip_update_interval:
|
|
mutex_lock(&data->update_lock);
|
|
ret = lm95245_set_conversion_rate(data, val);
|
|
mutex_unlock(&data->update_lock);
|
|
return ret;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int lm95245_read(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *val)
|
|
{
|
|
switch (type) {
|
|
case hwmon_chip:
|
|
return lm95245_read_chip(dev, attr, channel, val);
|
|
case hwmon_temp:
|
|
return lm95245_read_temp(dev, attr, channel, val);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int lm95245_write(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long val)
|
|
{
|
|
switch (type) {
|
|
case hwmon_chip:
|
|
return lm95245_write_chip(dev, attr, channel, val);
|
|
case hwmon_temp:
|
|
return lm95245_write_temp(dev, attr, channel, val);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static umode_t lm95245_temp_is_visible(const void *data, u32 attr, int channel)
|
|
{
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
case hwmon_temp_max_alarm:
|
|
case hwmon_temp_max_hyst:
|
|
case hwmon_temp_crit_alarm:
|
|
case hwmon_temp_fault:
|
|
return S_IRUGO;
|
|
case hwmon_temp_type:
|
|
case hwmon_temp_max:
|
|
case hwmon_temp_crit:
|
|
case hwmon_temp_offset:
|
|
return S_IRUGO | S_IWUSR;
|
|
case hwmon_temp_crit_hyst:
|
|
return (channel == 0) ? S_IRUGO | S_IWUSR : S_IRUGO;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static umode_t lm95245_is_visible(const void *data,
|
|
enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
switch (type) {
|
|
case hwmon_chip:
|
|
switch (attr) {
|
|
case hwmon_chip_update_interval:
|
|
return S_IRUGO | S_IWUSR;
|
|
default:
|
|
return 0;
|
|
}
|
|
case hwmon_temp:
|
|
return lm95245_temp_is_visible(data, attr, channel);
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int lm95245_detect(struct i2c_client *new_client,
|
|
struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = new_client->adapter;
|
|
int address = new_client->addr;
|
|
const char *name;
|
|
int rev, id;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -ENODEV;
|
|
|
|
id = i2c_smbus_read_byte_data(new_client, LM95245_REG_R_MAN_ID);
|
|
if (id != MANUFACTURER_ID)
|
|
return -ENODEV;
|
|
|
|
rev = i2c_smbus_read_byte_data(new_client, LM95245_REG_R_CHIP_ID);
|
|
switch (rev) {
|
|
case LM95235_REVISION:
|
|
if (address != 0x18 && address != 0x29 && address != 0x4c)
|
|
return -ENODEV;
|
|
name = "lm95235";
|
|
break;
|
|
case LM95245_REVISION:
|
|
name = "lm95245";
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
strlcpy(info->type, name, I2C_NAME_SIZE);
|
|
return 0;
|
|
}
|
|
|
|
static int lm95245_init_client(struct lm95245_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = lm95245_read_conversion_rate(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return regmap_update_bits(data->regmap, LM95245_REG_RW_CONFIG1,
|
|
CFG_STOP, 0);
|
|
}
|
|
|
|
static bool lm95245_is_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case LM95245_REG_RW_CONFIG1:
|
|
case LM95245_REG_RW_CONVERS_RATE:
|
|
case LM95245_REG_W_ONE_SHOT:
|
|
case LM95245_REG_RW_CONFIG2:
|
|
case LM95245_REG_RW_REMOTE_OFFH:
|
|
case LM95245_REG_RW_REMOTE_OFFL:
|
|
case LM95245_REG_RW_REMOTE_OS_LIMIT:
|
|
case LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT:
|
|
case LM95245_REG_RW_REMOTE_TCRIT_LIMIT:
|
|
case LM95245_REG_RW_COMMON_HYSTERESIS:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool lm95245_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case LM95245_REG_R_STATUS1:
|
|
case LM95245_REG_R_STATUS2:
|
|
case LM95245_REG_R_LOCAL_TEMPH_S:
|
|
case LM95245_REG_R_LOCAL_TEMPL_S:
|
|
case LM95245_REG_R_REMOTE_TEMPH_S:
|
|
case LM95245_REG_R_REMOTE_TEMPL_S:
|
|
case LM95245_REG_R_REMOTE_TEMPH_U:
|
|
case LM95245_REG_R_REMOTE_TEMPL_U:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config lm95245_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.writeable_reg = lm95245_is_writeable_reg,
|
|
.volatile_reg = lm95245_is_volatile_reg,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.use_single_rw = true,
|
|
};
|
|
|
|
static const u32 lm95245_chip_config[] = {
|
|
HWMON_C_UPDATE_INTERVAL,
|
|
0
|
|
};
|
|
|
|
static const struct hwmon_channel_info lm95245_chip = {
|
|
.type = hwmon_chip,
|
|
.config = lm95245_chip_config,
|
|
};
|
|
|
|
static const u32 lm95245_temp_config[] = {
|
|
HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_CRIT_ALARM,
|
|
HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | HWMON_T_CRIT |
|
|
HWMON_T_CRIT_HYST | HWMON_T_FAULT | HWMON_T_MAX_ALARM |
|
|
HWMON_T_CRIT_ALARM | HWMON_T_TYPE | HWMON_T_OFFSET,
|
|
0
|
|
};
|
|
|
|
static const struct hwmon_channel_info lm95245_temp = {
|
|
.type = hwmon_temp,
|
|
.config = lm95245_temp_config,
|
|
};
|
|
|
|
static const struct hwmon_channel_info *lm95245_info[] = {
|
|
&lm95245_chip,
|
|
&lm95245_temp,
|
|
NULL
|
|
};
|
|
|
|
static const struct hwmon_ops lm95245_hwmon_ops = {
|
|
.is_visible = lm95245_is_visible,
|
|
.read = lm95245_read,
|
|
.write = lm95245_write,
|
|
};
|
|
|
|
static const struct hwmon_chip_info lm95245_chip_info = {
|
|
.ops = &lm95245_hwmon_ops,
|
|
.info = lm95245_info,
|
|
};
|
|
|
|
static int lm95245_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct lm95245_data *data;
|
|
struct device *hwmon_dev;
|
|
int ret;
|
|
|
|
data = devm_kzalloc(dev, sizeof(struct lm95245_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->regmap = devm_regmap_init_i2c(client, &lm95245_regmap_config);
|
|
if (IS_ERR(data->regmap))
|
|
return PTR_ERR(data->regmap);
|
|
|
|
mutex_init(&data->update_lock);
|
|
|
|
/* Initialize the LM95245 chip */
|
|
ret = lm95245_init_client(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
|
|
data,
|
|
&lm95245_chip_info,
|
|
NULL);
|
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
|
}
|
|
|
|
/* Driver data (common to all clients) */
|
|
static const struct i2c_device_id lm95245_id[] = {
|
|
{ "lm95235", 0 },
|
|
{ "lm95245", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, lm95245_id);
|
|
|
|
static struct i2c_driver lm95245_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "lm95245",
|
|
},
|
|
.probe = lm95245_probe,
|
|
.id_table = lm95245_id,
|
|
.detect = lm95245_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
module_i2c_driver(lm95245_driver);
|
|
|
|
MODULE_AUTHOR("Alexander Stein <alexander.stein@systec-electronic.com>");
|
|
MODULE_DESCRIPTION("LM95235/LM95245 sensor driver");
|
|
MODULE_LICENSE("GPL");
|