linux_dsm_epyc7002/drivers/tty/serial
Takashi Yoshii 9d482cc353 serial: sh-sci: support lower baud rate
Support prescaler 1/16 and 1/64, in addition to current 1 and 1/4.

Supporting below 2400bps was dropped long time ago in mainline.
Since then, setting lower rate has been resulting in erroneous
register value, without indicating any errors through API.

This patch adds more prescaler to support lower rates again.
This still doesn't check range, but we won't hit the case because
even 50bps at 48MHz clock is now supported.

Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com>
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15 18:02:37 -08:00
..
8250 serial: 8250_pci: use module_pci_driver to simplify the code 2012-10-30 14:04:52 -07:00
cpm_uart Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate 2012-09-26 13:39:39 -07:00
jsm serial: jsm: Convert jsm_printk to jsm_dbg 2012-10-30 14:04:52 -07:00
21285.c Disintegrate asm/system.h for ARM 2012-03-28 18:30:01 +01:00
68328serial.c TTY: call tty_port_destroy in the rest of drivers 2012-11-15 17:20:58 -08:00
altera_jtaguart.c Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6 2011-10-27 08:35:41 +02:00
altera_uart.c tty: serial: altera_uart: Use platform_{get,set}_drvdata 2012-09-05 12:33:39 -07:00
amba-pl010.c drivers/tty/serial/amba-pl0{10,11}.c: use clk_prepare_enable and clk_disable_unprepare 2012-09-05 12:33:39 -07:00
amba-pl011.c serial/amba-pl011: use devm_* managed resources 2012-10-25 11:29:44 -07:00
apbuart.c apbuart: fix section mismatch warning 2011-12-27 16:33:13 -05:00
apbuart.h
ar933x_uart.c tty/serial/ar933x_uart: fix baud rate calculation 2012-11-15 17:15:02 -08:00
arc_uart.c serial/arc-uart: Add new driver 2012-10-30 14:06:52 -07:00
atmel_serial.c tty/serial: atmel_serial: fix RS485 half-duplex problem 2012-04-09 10:30:39 -07:00
bcm63xx_uart.c
bfin_sport_uart.c serial: bfin-sport-uart: Add tty ASYNC_CTS_FLOW flag to do CTS flow control. 2011-12-09 19:05:33 -08:00
bfin_sport_uart.h tty: bfin-sport-uart: Rx interrupt is not called always with irq disabled. 2011-12-09 19:05:33 -08:00
bfin_uart.c serial: bfin-uart: avoid dead lock in rx irq handler in smp kernel 2012-11-15 16:59:58 -08:00
clps711x.c serial: clps711x: Cleanup driver 2012-10-24 11:39:48 -07:00
crisv10.c TTY: use tty_port_link_device 2012-08-13 16:50:19 -07:00
crisv10.h
dz.c Remove all #inclusions of asm/system.h 2012-03-28 18:30:03 +01:00
dz.h
efm32-uart.c serial/efm32: add new driver 2012-01-26 11:29:47 -08:00
icom.c Remove all #inclusions of asm/system.h 2012-03-28 18:30:03 +01:00
icom.h
ifx6x60.c TTY: call tty_port_destroy in the rest of drivers 2012-11-15 17:20:58 -08:00
ifx6x60.h serial:ifx6x60:Prevent data transfer when IFX6x60 port is shutdown 2012-11-01 08:50:01 -07:00
imx.c ARM: soc: multiplatform enablement 2012-10-01 19:11:38 -07:00
ioc3_serial.c TTY: serial: move the dereference below the NULL test 2012-09-10 16:33:02 -07:00
ioc4_serial.c TTY: serial: move the dereference below the NULL test 2012-09-10 16:33:02 -07:00
ip22zilog.c
ip22zilog.h
Kconfig serial: Unneeded ARCH dependencies are removed 2012-11-15 17:11:42 -08:00
kgdb_nmi.c TTY: call tty_port_destroy in the rest of drivers 2012-11-15 17:20:58 -08:00
kgdboc.c KGDB/KDB fixes and cleanups 2012-10-13 11:16:58 +09:00
lantiq.c SERIAL: MIPS: lantiq: implement OF support 2012-05-21 14:31:54 +01:00
lpc32xx_hs.c serial: Add driver for LPC32xx High Speed UARTs 2012-06-12 15:48:01 -07:00
m32r_sio_reg.h m32r: relocate drivers back out of 8250 dir 2012-02-08 15:04:32 -08:00
m32r_sio.c m32r_sio: remove dependency on struct serial_uart_config 2012-09-05 13:15:07 -07:00
m32r_sio.h TTY: serial, include pci.h in m32r_sio 2012-03-08 11:47:02 -08:00
Makefile serial/arc-uart: Add new driver 2012-10-30 14:06:52 -07:00
max310x.c tty: serial: max310x: Remove explicit use of devm_kfree 2012-09-05 12:33:40 -07:00
max3100.c tty: serial: max3100: Fix error case 2012-09-17 04:45:29 -07:00
mcf.c TTY: irq: Remove IRQF_DISABLED 2011-09-22 16:08:57 -07:00
mfd.c serial: mfd: Add nmi_touch_watchdog() into the console write function 2012-11-15 17:06:10 -08:00
mpc52xx_uart.c ARM: soc: non-critical bug fixes 2012-10-01 18:02:07 -07:00
mpsc.c
mrst_max3110.c TTY: Remove redundant spi driver bus initialization 2011-11-26 20:19:21 -08:00
mrst_max3110.h max3110: add sysrq support 2011-08-26 11:01:15 -07:00
msm_serial_hs.c Remove all #inclusions of asm/system.h 2012-03-28 18:30:03 +01:00
msm_serial.c msm_serial: fix clock rate on DMA-based uarts 2012-09-10 16:33:36 -07:00
msm_serial.h
msm_smd_tty.c TTY: use tty_port_register_device 2012-08-13 16:50:19 -07:00
mux.c tty/serial/mux.c: linux/tty.h included twice 2012-02-24 13:50:45 -08:00
mxs-auart.c serial: mxs-auart: put the device in the error path 2012-09-11 12:21:33 -07:00
netx-serial.c
nwpserial.c tty: Add export.h for EXPORT_SYMBOL/THIS_MODULE to exporters 2011-10-31 19:31:28 -04:00
of_serial.c tty: of_serial: fix return value check in of_platform_serial_setup() 2012-11-01 08:50:01 -07:00
omap-serial.c Merge 3.7-rc3 into tty-next 2012-10-29 09:00:57 -07:00
pch_uart.c pch_uart: check kzalloc result in dma_handle_tx() 2012-08-16 12:10:16 -07:00
pmac_zilog.c pmac_zilog,kdb: Fix console poll hook to return instead of loop 2012-08-16 12:20:20 -07:00
pmac_zilog.h tty/serial/pmac_zilog: Fix suspend & resume 2011-12-16 11:10:01 +11:00
pnx8xxx_uart.c
pxa.c tty: serial: KGDB support for PXA 2012-10-24 11:38:28 -07:00
sa1100.c ARM: 7342/2: sa1100: prepare for sparse irq conversion 2012-03-25 23:57:20 +01:00
samsung.c serial: samsung: use clk_prepare_enable and clk_disable_unprepare 2012-10-24 11:29:30 -07:00
samsung.h serial: samsung: merge probe() function from all SoC specific extensions 2011-12-23 10:07:00 +09:00
sb1250-duart.c SERIAL: MIPS Swarm sb1250-duart.c driver needs module.h 2012-05-15 17:48:50 +02:00
sc26xx.c serial: Add note about migration to driver SCCNXP 2012-09-05 13:24:40 -07:00
sccnxp.c tty: serial: sccnxp: Fix bug with unterminated platform_id list 2012-10-05 09:34:37 -07:00
serial_core.c TTY: call tty_port_destroy in the rest of drivers 2012-11-15 17:20:58 -08:00
serial_ks8695.c serial: ks8695: use __iomem pointers for MMIO 2012-09-19 15:37:13 +02:00
serial_txx9.c serial: fix serial_txx9.c build warning/typo 2012-06-12 15:41:18 -07:00
sh-sci.c serial: sh-sci: support lower baud rate 2012-11-15 18:02:37 -08:00
sh-sci.h serial: sh-sci: use serial_port_in/out vs sci_in/out. 2012-03-30 19:50:15 +09:00
sirfsoc_uart.c drivers/tty/serial/sirfsoc_uart.c: drop frees of devm_ alloc'd data 2012-09-05 12:41:57 -07:00
sirfsoc_uart.h serial/sirf: fixup for changes to pin control 2012-02-22 17:59:12 +01:00
sn_console.c Miscellaneous Itanium patches 2012-03-23 17:19:37 -07:00
suncore.c tty: sparc: rename drivers/tty/serial/suncore.h -> include/linux/sunserialcore.h 2012-02-10 10:44:35 -08:00
sunhv.c Disintegrate asm/system.h for Sparc 2012-03-28 18:30:03 +01:00
sunsab.c Disintegrate asm/system.h for Sparc 2012-03-28 18:30:03 +01:00
sunsab.h
sunsu.c serial: diminish usage of struct serial_uart_config 2012-09-05 13:15:07 -07:00
sunzilog.c serial/sunzilog: fix keyboard on SUN SPARCstation 2012-04-04 00:37:10 -07:00
sunzilog.h
timbuart.c TTY: serial: convert drivers/tty/serial/* to use module_platform_driver() 2011-11-30 20:11:46 +09:00
timbuart.h
uartlite.c uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op 2012-07-19 10:39:42 -04:00
ucc_uart.c serial: Kill off NO_IRQ 2012-01-26 17:14:50 -08:00
vr41xx_siu.c serial: Kill off NO_IRQ 2012-01-26 17:14:50 -08:00
vt8500_serial.c serial: vt8500: fix possible memory leak in vt8500_serial_probe() 2012-10-24 11:34:51 -07:00
xilinx_uartps.c serial: xilinx_uartps: kill CONFIG_OF conditional 2012-11-15 16:58:19 -08:00
zs.c SERIAL: MIPS DECstation zs.c driver needs module.h 2012-05-15 17:48:50 +02:00
zs.h