mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 21:29:49 +07:00
e6c906dedb
If a driver does not set interrupt triggering type when it calls request_irq(), it means use the pin as the hardware/firmware has configured it. There are some drivers doing this. One example is drivers/input/serio/i8042.c that requests the interrupt like: error = request_irq(I8042_KBD_IRQ, i8042_interrupt, IRQF_SHARED, "i8042", i8042_platform_device); It assumes the interrupt is already properly configured. This is true in case of interrupts connected to the IO-APIC. However, some Intel Braswell/Cherryview based machines use a GPIO here instead for the internal keyboard controller. This is a problem because even if the pin/interrupt is properly configured, the irqchip ->irq_set_type() will never be called as the triggering flags are 0. Because of that we do not have correct interrupt flow handler set for the interrupt. Fix this by adding a custom ->irq_startup() that checks if the interrupt has no triggering type set and in that case read the type directly from the hardware and install correct flow handler along with the mapping. Reported-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reported-by: Freddy Paul <freddy.paul@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| Makefile | ||
| pinctrl-baytrail.c | ||
| pinctrl-cherryview.c | ||
| pinctrl-intel.c | ||
| pinctrl-intel.h | ||
| pinctrl-sunrisepoint.c | ||