mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 21:45:17 +07:00
18e714687b
The WiFi tx power of RTL8723BU is extremely low after booting. So the WiFi scan gives very limited AP list and it always fails to connect to the selected AP. This module only supports 1x1 antenna and the antenna is switched to bluetooth due to some incorrect register settings. Compare with the vendor driver https://github.com/lwfinger/rtl8723bu, we realized that the 8723bu's enable_rf() does the same thing as rtw_btcoex_HAL_Initialize() in vendor driver. And it by default sets the antenna path to BTC_ANT_PATH_BT which we verified it's the cause of the wifi weak tx power. The vendor driver will set the antenna path to BTC_ANT_PATH_PTA in the consequent btcoexist mechanism, by the function halbtc8723b1ant_PsTdma. This commit hand over the antenna control to PTA(Packet Traffic Arbitration), which compares the weight of bluetooth/wifi traffic then determine whether to continue current wifi traffic or not. After PTA take control, The wifi signal will be back to normal and the bluetooth scan can also work at the same time. However, the btcoexist still needs to be handled under different circumstances. If there's a BT connection established, the wifi still fails to connect until BT disconnected. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| Makefile | ||
| rtl8xxxu_8192c.c | ||
| rtl8xxxu_8192e.c | ||
| rtl8xxxu_8723a.c | ||
| rtl8xxxu_8723b.c | ||
| rtl8xxxu_core.c | ||
| rtl8xxxu_regs.h | ||
| rtl8xxxu.h | ||