linux_dsm_epyc7002/drivers/pcmcia/pxa2xx_cm_x270.c
Russell King 4e5e8de0db [ARM] pxa: avoid kfreeing static data if platform device fails to register
When a dynamically allocated platform device is 'put', the platform
device's platform_data is kfree'd.  This is bad if it's pointing at
static data.  Use the provided function to register platform data
for these devices.

This also means we can mark the pcmcia ops structures as __initdata.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02 13:49:16 +01:00

184 lines
4.6 KiB
C

/*
* linux/drivers/pcmcia/pxa/pxa_cm_x270.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Compulab Ltd., 2003, 2007
* Mike Rapoport <mike@compulab.co.il>
*
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <pcmcia/ss.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/cm-x270.h>
#include "soc_common.h"
static struct pcmcia_irqs irqs[] = {
{ 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
{ 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" },
};
static int cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
GPIO_bit(GPIO49_nPWE) |
GPIO_bit(GPIO50_nPIOR) |
GPIO_bit(GPIO51_nPIOW) |
GPIO_bit(GPIO85_nPCE_1) |
GPIO_bit(GPIO54_nPCE_2);
pxa_gpio_mode(GPIO48_nPOE_MD);
pxa_gpio_mode(GPIO49_nPWE_MD);
pxa_gpio_mode(GPIO50_nPIOR_MD);
pxa_gpio_mode(GPIO51_nPIOW_MD);
pxa_gpio_mode(GPIO85_nPCE_1_MD);
pxa_gpio_mode(GPIO54_nPCE_2_MD);
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
/* Reset signal */
pxa_gpio_mode(GPIO53_nPCE_2 | GPIO_OUT);
GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
set_irq_type(PCMCIA_S0_CD_VALID, IRQ_TYPE_EDGE_BOTH);
set_irq_type(PCMCIA_S1_CD_VALID, IRQ_TYPE_EDGE_BOTH);
/* irq's for slots: */
set_irq_type(PCMCIA_S0_RDYINT, IRQ_TYPE_EDGE_FALLING);
set_irq_type(PCMCIA_S1_RDYINT, IRQ_TYPE_EDGE_FALLING);
skt->irq = (skt->nr == 0) ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
}
static void cmx270_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
{
soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID), IRQ_TYPE_NONE);
set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID), IRQ_TYPE_NONE);
set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_RDYINT), IRQ_TYPE_NONE);
set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_RDYINT), IRQ_TYPE_NONE);
}
static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
state->detect = (PCC_DETECT(skt->nr) == 0) ? 1 : 0;
state->ready = (PCC_READY(skt->nr) == 0) ? 0 : 1;
state->bvd1 = 1;
state->bvd2 = 1;
state->vs_3v = 0;
state->vs_Xv = 0;
state->wrprot = 0; /* not available */
}
static int cmx270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
pxa_gpio_mode(GPIO49_nPWE | GPIO_OUT);
switch (skt->nr) {
case 0:
if (state->flags & SS_RESET) {
GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
udelay(10);
GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
}
break;
case 1:
if (state->flags & SS_RESET) {
GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
udelay(10);
GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
}
break;
}
pxa_gpio_mode(GPIO49_nPWE_MD);
return 0;
}
static void cmx270_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
{
}
static void cmx270_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
}
static struct pcmcia_low_level cmx270_pcmcia_ops __initdata = {
.owner = THIS_MODULE,
.hw_init = cmx270_pcmcia_hw_init,
.hw_shutdown = cmx270_pcmcia_shutdown,
.socket_state = cmx270_pcmcia_socket_state,
.configure_socket = cmx270_pcmcia_configure_socket,
.socket_init = cmx270_pcmcia_socket_init,
.socket_suspend = cmx270_pcmcia_socket_suspend,
.nr = 2,
};
static struct platform_device *cmx270_pcmcia_device;
static int __init cmx270_pcmcia_init(void)
{
int ret;
if (!machine_is_armcore())
return -ENODEV;
cmx270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
if (!cmx270_pcmcia_device)
return -ENOMEM;
ret = platform_device_add_data(cmx270_pcmcia_device, &cmx270_pcmcia_ops,
sizeof(cmx270_pcmcia_ops));
if (ret == 0) {
printk(KERN_INFO "Registering cm-x270 PCMCIA interface.\n");
ret = platform_device_add(cmx270_pcmcia_device);
}
if (ret)
platform_device_put(cmx270_pcmcia_device);
return ret;
}
static void __exit cmx270_pcmcia_exit(void)
{
platform_device_unregister(cmx270_pcmcia_device);
}
module_init(cmx270_pcmcia_init);
module_exit(cmx270_pcmcia_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
MODULE_DESCRIPTION("CM-x270 PCMCIA driver");