mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 20:45:20 +07:00
9c333719ae
On my 855 machine the BIOS uses the following DPLL settings: DPLL 0x90016000 FP0 = 0x61207 FP1 = 0x21207 With the 66MHz SSC refclock, that puts the BIOS generated VCO frequency at ~908 MHz, which is lower than the 930 MHz limit we have currently. This also results in the pixel clock coming out significantly higher than the requested 65 MHz when we try to recompute it. Reduce the the VCO limit to 908 MHz. Combined with the earlier SSC reference clock accuracy fix, this results in the pixel clock coming out as 65.08 MHz which is quite close to the target. For some reason the BIOS uses 64.881 MHz, which isn't quite as close. This makes kms_flip wf_vblank-ts-check pass for the first time on this machine \o/ Cc: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> |
||
|---|---|---|
| .. | ||
| armada | ||
| ast | ||
| cirrus | ||
| exynos | ||
| gma500 | ||
| i2c | ||
| i810 | ||
| i915 | ||
| mga | ||
| mgag200 | ||
| msm | ||
| nouveau | ||
| omapdrm | ||
| qxl | ||
| r128 | ||
| radeon | ||
| rcar-du | ||
| savage | ||
| shmobile | ||
| sis | ||
| tdfx | ||
| tegra | ||
| tilcdc | ||
| ttm | ||
| udl | ||
| via | ||
| vmwgfx | ||
| ati_pcigart.c | ||
| drm_agpsupport.c | ||
| drm_auth.c | ||
| drm_buffer.c | ||
| drm_bufs.c | ||
| drm_cache.c | ||
| drm_context.c | ||
| drm_crtc_helper.c | ||
| drm_crtc.c | ||
| drm_debugfs.c | ||
| drm_dma.c | ||
| drm_dp_helper.c | ||
| drm_drv.c | ||
| drm_edid_load.c | ||
| drm_edid.c | ||
| drm_encoder_slave.c | ||
| drm_fb_cma_helper.c | ||
| drm_fb_helper.c | ||
| drm_flip_work.c | ||
| drm_fops.c | ||
| drm_gem_cma_helper.c | ||
| drm_gem.c | ||
| drm_global.c | ||
| drm_hashtab.c | ||
| drm_info.c | ||
| drm_ioc32.c | ||
| drm_ioctl.c | ||
| drm_irq.c | ||
| drm_lock.c | ||
| drm_memory.c | ||
| drm_mm.c | ||
| drm_modes.c | ||
| drm_pci.c | ||
| drm_platform.c | ||
| drm_prime.c | ||
| drm_rect.c | ||
| drm_scatter.c | ||
| drm_stub.c | ||
| drm_sysfs.c | ||
| drm_trace_points.c | ||
| drm_trace.h | ||
| drm_usb.c | ||
| drm_vm.c | ||
| drm_vma_manager.c | ||
| Kconfig | ||
| Makefile | ||
| README.drm | ||
************************************************************
* For the very latest on DRI development, please see: *
* http://dri.freedesktop.org/ *
************************************************************
The Direct Rendering Manager (drm) is a device-independent kernel-level
device driver that provides support for the XFree86 Direct Rendering
Infrastructure (DRI).
The DRM supports the Direct Rendering Infrastructure (DRI) in four major
ways:
1. The DRM provides synchronized access to the graphics hardware via
the use of an optimized two-tiered lock.
2. The DRM enforces the DRI security policy for access to the graphics
hardware by only allowing authenticated X11 clients access to
restricted regions of memory.
3. The DRM provides a generic DMA engine, complete with multiple
queues and the ability to detect the need for an OpenGL context
switch.
4. The DRM is extensible via the use of small device-specific modules
that rely extensively on the API exported by the DRM module.
Documentation on the DRI is available from:
http://dri.freedesktop.org/wiki/Documentation
http://sourceforge.net/project/showfiles.php?group_id=387
http://dri.sourceforge.net/doc/
For specific information about kernel-level support, see:
The Direct Rendering Manager, Kernel Support for the Direct Rendering
Infrastructure
http://dri.sourceforge.net/doc/drm_low_level.html
Hardware Locking for the Direct Rendering Infrastructure
http://dri.sourceforge.net/doc/hardware_locking_low_level.html
A Security Analysis of the Direct Rendering Infrastructure
http://dri.sourceforge.net/doc/security_low_level.html