linux_dsm_epyc7002/drivers/mmc/mmc_block.c
Christoph Hellwig a885c8c431 [PATCH] Add block_device_operations.getgeo block device method
HDIO_GETGEO is implemented in most block drivers, and all of them have to
duplicate the code to copy the structure to userspace, as well as getting
the start sector.  This patch moves that to common code [1] and adds a
->getgeo method to fill out the raw kernel hd_geometry structure.  For many
drivers this means ->ioctl can go away now.

[1] the s390 block drivers are odd in this respect.  xpram sets ->start
    to 4 always which seems more than odd, and the dasd driver shifts
    the start offset around, probably because of it's non-standard
    sector size.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@suse.de>
Cc: <mike.miller@hp.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:54 -08:00

565 lines
12 KiB
C

/*
* Block driver for media (i.e., flash cards)
*
* Copyright 2002 Hewlett-Packard Company
*
* Use consistent with the GNU GPL is permitted,
* provided that this copyright notice is
* preserved in its entirety in all copies and derived works.
*
* HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
* FITNESS FOR ANY PARTICULAR PURPOSE.
*
* Many thanks to Alessandro Rubini and Jonathan Corbet!
*
* Author: Andrew Christian
* 28 May 2002
*/
#include <linux/moduleparam.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/errno.h>
#include <linux/hdreg.h>
#include <linux/kdev_t.h>
#include <linux/blkdev.h>
#include <linux/devfs_fs_kernel.h>
#include <linux/mmc/card.h>
#include <linux/mmc/protocol.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include "mmc_queue.h"
/*
* max 8 partitions per card
*/
#define MMC_SHIFT 3
static int major;
/*
* There is one mmc_blk_data per slot.
*/
struct mmc_blk_data {
spinlock_t lock;
struct gendisk *disk;
struct mmc_queue queue;
unsigned int usage;
unsigned int block_bits;
unsigned int read_only;
};
static DECLARE_MUTEX(open_lock);
static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk)
{
struct mmc_blk_data *md;
down(&open_lock);
md = disk->private_data;
if (md && md->usage == 0)
md = NULL;
if (md)
md->usage++;
up(&open_lock);
return md;
}
static void mmc_blk_put(struct mmc_blk_data *md)
{
down(&open_lock);
md->usage--;
if (md->usage == 0) {
put_disk(md->disk);
mmc_cleanup_queue(&md->queue);
kfree(md);
}
up(&open_lock);
}
static int mmc_blk_open(struct inode *inode, struct file *filp)
{
struct mmc_blk_data *md;
int ret = -ENXIO;
md = mmc_blk_get(inode->i_bdev->bd_disk);
if (md) {
if (md->usage == 2)
check_disk_change(inode->i_bdev);
ret = 0;
if ((filp->f_mode & FMODE_WRITE) && md->read_only)
ret = -EROFS;
}
return ret;
}
static int mmc_blk_release(struct inode *inode, struct file *filp)
{
struct mmc_blk_data *md = inode->i_bdev->bd_disk->private_data;
mmc_blk_put(md);
return 0;
}
static int
mmc_blk_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
geo->cylinders = get_capacity(bdev->bd_disk) / (4 * 16);
geo->heads = 4;
geo->sectors = 16;
return 0;
}
static struct block_device_operations mmc_bdops = {
.open = mmc_blk_open,
.release = mmc_blk_release,
.getgeo = mmc_blk_getgeo,
.owner = THIS_MODULE,
};
struct mmc_blk_request {
struct mmc_request mrq;
struct mmc_command cmd;
struct mmc_command stop;
struct mmc_data data;
};
static int mmc_blk_prep_rq(struct mmc_queue *mq, struct request *req)
{
struct mmc_blk_data *md = mq->data;
int stat = BLKPREP_OK;
/*
* If we have no device, we haven't finished initialising.
*/
if (!md || !mq->card) {
printk(KERN_ERR "%s: killing request - no device/host\n",
req->rq_disk->disk_name);
stat = BLKPREP_KILL;
}
return stat;
}
static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
{
struct mmc_blk_data *md = mq->data;
struct mmc_card *card = md->queue.card;
int ret;
if (mmc_card_claim_host(card))
goto cmd_err;
do {
struct mmc_blk_request brq;
struct mmc_command cmd;
memset(&brq, 0, sizeof(struct mmc_blk_request));
brq.mrq.cmd = &brq.cmd;
brq.mrq.data = &brq.data;
brq.cmd.arg = req->sector << 9;
brq.cmd.flags = MMC_RSP_R1;
brq.data.timeout_ns = card->csd.tacc_ns * 10;
brq.data.timeout_clks = card->csd.tacc_clks * 10;
brq.data.blksz_bits = md->block_bits;
brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
brq.stop.opcode = MMC_STOP_TRANSMISSION;
brq.stop.arg = 0;
brq.stop.flags = MMC_RSP_R1B;
if (rq_data_dir(req) == READ) {
brq.cmd.opcode = brq.data.blocks > 1 ? MMC_READ_MULTIPLE_BLOCK : MMC_READ_SINGLE_BLOCK;
brq.data.flags |= MMC_DATA_READ;
} else {
brq.cmd.opcode = MMC_WRITE_BLOCK;
brq.data.flags |= MMC_DATA_WRITE;
brq.data.blocks = 1;
}
brq.mrq.stop = brq.data.blocks > 1 ? &brq.stop : NULL;
brq.data.sg = mq->sg;
brq.data.sg_len = blk_rq_map_sg(req->q, req, brq.data.sg);
mmc_wait_for_req(card->host, &brq.mrq);
if (brq.cmd.error) {
printk(KERN_ERR "%s: error %d sending read/write command\n",
req->rq_disk->disk_name, brq.cmd.error);
goto cmd_err;
}
if (brq.data.error) {
printk(KERN_ERR "%s: error %d transferring data\n",
req->rq_disk->disk_name, brq.data.error);
goto cmd_err;
}
if (brq.stop.error) {
printk(KERN_ERR "%s: error %d sending stop command\n",
req->rq_disk->disk_name, brq.stop.error);
goto cmd_err;
}
do {
int err;
cmd.opcode = MMC_SEND_STATUS;
cmd.arg = card->rca << 16;
cmd.flags = MMC_RSP_R1;
err = mmc_wait_for_cmd(card->host, &cmd, 5);
if (err) {
printk(KERN_ERR "%s: error %d requesting status\n",
req->rq_disk->disk_name, err);
goto cmd_err;
}
} while (!(cmd.resp[0] & R1_READY_FOR_DATA));
#if 0
if (cmd.resp[0] & ~0x00000900)
printk(KERN_ERR "%s: status = %08x\n",
req->rq_disk->disk_name, cmd.resp[0]);
if (mmc_decode_status(cmd.resp))
goto cmd_err;
#endif
/*
* A block was successfully transferred.
*/
spin_lock_irq(&md->lock);
ret = end_that_request_chunk(req, 1, brq.data.bytes_xfered);
if (!ret) {
/*
* The whole request completed successfully.
*/
add_disk_randomness(req->rq_disk);
blkdev_dequeue_request(req);
end_that_request_last(req, 1);
}
spin_unlock_irq(&md->lock);
} while (ret);
mmc_card_release_host(card);
return 1;
cmd_err:
mmc_card_release_host(card);
/*
* This is a little draconian, but until we get proper
* error handling sorted out here, its the best we can
* do - especially as some hosts have no idea how much
* data was transferred before the error occurred.
*/
spin_lock_irq(&md->lock);
do {
ret = end_that_request_chunk(req, 0,
req->current_nr_sectors << 9);
} while (ret);
add_disk_randomness(req->rq_disk);
blkdev_dequeue_request(req);
end_that_request_last(req, 0);
spin_unlock_irq(&md->lock);
return 0;
}
#define MMC_NUM_MINORS (256 >> MMC_SHIFT)
static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))];
static inline int mmc_blk_readonly(struct mmc_card *card)
{
return mmc_card_readonly(card) ||
!(card->csd.cmdclass & CCC_BLOCK_WRITE);
}
static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
{
struct mmc_blk_data *md;
int devidx, ret;
devidx = find_first_zero_bit(dev_use, MMC_NUM_MINORS);
if (devidx >= MMC_NUM_MINORS)
return ERR_PTR(-ENOSPC);
__set_bit(devidx, dev_use);
md = kmalloc(sizeof(struct mmc_blk_data), GFP_KERNEL);
if (!md) {
ret = -ENOMEM;
goto out;
}
memset(md, 0, sizeof(struct mmc_blk_data));
/*
* Set the read-only status based on the supported commands
* and the write protect switch.
*/
md->read_only = mmc_blk_readonly(card);
/*
* Figure out a workable block size. MMC cards have:
* - two block sizes, one for read and one for write.
* - may support partial reads and/or writes
* (allows block sizes smaller than specified)
*/
md->block_bits = card->csd.read_blkbits;
if (card->csd.write_blkbits != card->csd.read_blkbits) {
if (card->csd.write_blkbits < card->csd.read_blkbits &&
card->csd.read_partial) {
/*
* write block size is smaller than read block
* size, but we support partial reads, so choose
* the smaller write block size.
*/
md->block_bits = card->csd.write_blkbits;
} else if (card->csd.write_blkbits > card->csd.read_blkbits &&
card->csd.write_partial) {
/*
* read block size is smaller than write block
* size, but we support partial writes. Use read
* block size.
*/
} else {
/*
* We don't support this configuration for writes.
*/
printk(KERN_ERR "%s: unable to select block size for "
"writing (rb%u wb%u rp%u wp%u)\n",
md->disk->disk_name,
1 << card->csd.read_blkbits,
1 << card->csd.write_blkbits,
card->csd.read_partial,
card->csd.write_partial);
md->read_only = 1;
}
}
/*
* Refuse to allow block sizes smaller than 512 bytes.
*/
if (md->block_bits < 9) {
printk(KERN_ERR "%s: unable to support block size %u\n",
mmc_card_id(card), 1 << md->block_bits);
ret = -EINVAL;
goto err_kfree;
}
md->disk = alloc_disk(1 << MMC_SHIFT);
if (md->disk == NULL) {
ret = -ENOMEM;
goto err_kfree;
}
spin_lock_init(&md->lock);
md->usage = 1;
ret = mmc_init_queue(&md->queue, card, &md->lock);
if (ret)
goto err_putdisk;
md->queue.prep_fn = mmc_blk_prep_rq;
md->queue.issue_fn = mmc_blk_issue_rq;
md->queue.data = md;
md->disk->major = major;
md->disk->first_minor = devidx << MMC_SHIFT;
md->disk->fops = &mmc_bdops;
md->disk->private_data = md;
md->disk->queue = md->queue.queue;
md->disk->driverfs_dev = &card->dev;
/*
* As discussed on lkml, GENHD_FL_REMOVABLE should:
*
* - be set for removable media with permanent block devices
* - be unset for removable block devices with permanent media
*
* Since MMC block devices clearly fall under the second
* case, we do not set GENHD_FL_REMOVABLE. Userspace
* should use the block device creation/destruction hotplug
* messages to tell when the card is present.
*/
sprintf(md->disk->disk_name, "mmcblk%d", devidx);
sprintf(md->disk->devfs_name, "mmc/blk%d", devidx);
blk_queue_hardsect_size(md->queue.queue, 1 << md->block_bits);
/*
* The CSD capacity field is in units of read_blkbits.
* set_capacity takes units of 512 bytes.
*/
set_capacity(md->disk, card->csd.capacity << (card->csd.read_blkbits - 9));
return md;
err_putdisk:
put_disk(md->disk);
err_kfree:
kfree(md);
out:
return ERR_PTR(ret);
}
static int
mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card)
{
struct mmc_command cmd;
int err;
mmc_card_claim_host(card);
cmd.opcode = MMC_SET_BLOCKLEN;
cmd.arg = 1 << md->block_bits;
cmd.flags = MMC_RSP_R1;
err = mmc_wait_for_cmd(card->host, &cmd, 5);
mmc_card_release_host(card);
if (err) {
printk(KERN_ERR "%s: unable to set block size to %d: %d\n",
md->disk->disk_name, cmd.arg, err);
return -EINVAL;
}
return 0;
}
static int mmc_blk_probe(struct mmc_card *card)
{
struct mmc_blk_data *md;
int err;
/*
* Check that the card supports the command class(es) we need.
*/
if (!(card->csd.cmdclass & CCC_BLOCK_READ))
return -ENODEV;
md = mmc_blk_alloc(card);
if (IS_ERR(md))
return PTR_ERR(md);
err = mmc_blk_set_blksize(md, card);
if (err)
goto out;
printk(KERN_INFO "%s: %s %s %luKiB %s\n",
md->disk->disk_name, mmc_card_id(card), mmc_card_name(card),
get_capacity(md->disk) >> 1, md->read_only ? "(ro)" : "");
mmc_set_drvdata(card, md);
add_disk(md->disk);
return 0;
out:
mmc_blk_put(md);
return err;
}
static void mmc_blk_remove(struct mmc_card *card)
{
struct mmc_blk_data *md = mmc_get_drvdata(card);
if (md) {
int devidx;
del_gendisk(md->disk);
/*
* I think this is needed.
*/
md->disk->queue = NULL;
devidx = md->disk->first_minor >> MMC_SHIFT;
__clear_bit(devidx, dev_use);
mmc_blk_put(md);
}
mmc_set_drvdata(card, NULL);
}
#ifdef CONFIG_PM
static int mmc_blk_suspend(struct mmc_card *card, pm_message_t state)
{
struct mmc_blk_data *md = mmc_get_drvdata(card);
if (md) {
mmc_queue_suspend(&md->queue);
}
return 0;
}
static int mmc_blk_resume(struct mmc_card *card)
{
struct mmc_blk_data *md = mmc_get_drvdata(card);
if (md) {
mmc_blk_set_blksize(md, card);
mmc_queue_resume(&md->queue);
}
return 0;
}
#else
#define mmc_blk_suspend NULL
#define mmc_blk_resume NULL
#endif
static struct mmc_driver mmc_driver = {
.drv = {
.name = "mmcblk",
},
.probe = mmc_blk_probe,
.remove = mmc_blk_remove,
.suspend = mmc_blk_suspend,
.resume = mmc_blk_resume,
};
static int __init mmc_blk_init(void)
{
int res = -ENOMEM;
res = register_blkdev(major, "mmc");
if (res < 0) {
printk(KERN_WARNING "Unable to get major %d for MMC media: %d\n",
major, res);
goto out;
}
if (major == 0)
major = res;
devfs_mk_dir("mmc");
return mmc_register_driver(&mmc_driver);
out:
return res;
}
static void __exit mmc_blk_exit(void)
{
mmc_unregister_driver(&mmc_driver);
devfs_remove("mmc");
unregister_blkdev(major, "mmc");
}
module_init(mmc_blk_init);
module_exit(mmc_blk_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Multimedia Card (MMC) block device driver");
module_param(major, int, 0444);
MODULE_PARM_DESC(major, "specify the major device number for MMC block driver");