mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 21:50:53 +07:00
7846e471b5
- Advertise 1G KX4 in CL73 when 1G speed capability is enabled - Add flow-control negotiation over CL73 - External loopback test on Serdes should be done in FORCE mode, since in CL73 it is unable to link up with the same core using AUTONEG - Fix bnx2x_set_led function to support CL73 link leds Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
207 lines
6.6 KiB
C
207 lines
6.6 KiB
C
/* Copyright 2008-2009 Broadcom Corporation
|
|
*
|
|
* Unless you and Broadcom execute a separate written software license
|
|
* agreement governing use of this software, this software is licensed to you
|
|
* under the terms of the GNU General Public License version 2, available
|
|
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
|
|
*
|
|
* Notwithstanding the above, under no circumstances may you combine this
|
|
* software in any way with any other Broadcom software provided under a
|
|
* license other than the GPL, without Broadcom's express prior written
|
|
* consent.
|
|
*
|
|
* Written by Yaniv Rosner
|
|
*
|
|
*/
|
|
|
|
#ifndef BNX2X_LINK_H
|
|
#define BNX2X_LINK_H
|
|
|
|
|
|
|
|
/***********************************************************/
|
|
/* Defines */
|
|
/***********************************************************/
|
|
#define DEFAULT_PHY_DEV_ADDR 3
|
|
|
|
|
|
|
|
#define BNX2X_FLOW_CTRL_AUTO PORT_FEATURE_FLOW_CONTROL_AUTO
|
|
#define BNX2X_FLOW_CTRL_TX PORT_FEATURE_FLOW_CONTROL_TX
|
|
#define BNX2X_FLOW_CTRL_RX PORT_FEATURE_FLOW_CONTROL_RX
|
|
#define BNX2X_FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH
|
|
#define BNX2X_FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE
|
|
|
|
#define SPEED_AUTO_NEG 0
|
|
#define SPEED_12000 12000
|
|
#define SPEED_12500 12500
|
|
#define SPEED_13000 13000
|
|
#define SPEED_15000 15000
|
|
#define SPEED_16000 16000
|
|
|
|
#define SFP_EEPROM_VENDOR_NAME_ADDR 0x14
|
|
#define SFP_EEPROM_VENDOR_NAME_SIZE 16
|
|
#define SFP_EEPROM_VENDOR_OUI_ADDR 0x25
|
|
#define SFP_EEPROM_VENDOR_OUI_SIZE 3
|
|
#define SFP_EEPROM_PART_NO_ADDR 0x28
|
|
#define SFP_EEPROM_PART_NO_SIZE 16
|
|
#define PWR_FLT_ERR_MSG_LEN 250
|
|
/***********************************************************/
|
|
/* Structs */
|
|
/***********************************************************/
|
|
/* Inputs parameters to the CLC */
|
|
struct link_params {
|
|
|
|
u8 port;
|
|
|
|
/* Default / User Configuration */
|
|
u8 loopback_mode;
|
|
#define LOOPBACK_NONE 0
|
|
#define LOOPBACK_EMAC 1
|
|
#define LOOPBACK_BMAC 2
|
|
#define LOOPBACK_XGXS_10 3
|
|
#define LOOPBACK_EXT_PHY 4
|
|
#define LOOPBACK_EXT 5
|
|
|
|
u16 req_duplex;
|
|
u16 req_flow_ctrl;
|
|
u16 req_fc_auto_adv; /* Should be set to TX / BOTH when
|
|
req_flow_ctrl is set to AUTO */
|
|
u16 req_line_speed; /* Also determine AutoNeg */
|
|
|
|
/* Device parameters */
|
|
u8 mac_addr[6];
|
|
|
|
/* shmem parameters */
|
|
u32 shmem_base;
|
|
u32 speed_cap_mask;
|
|
u32 switch_cfg;
|
|
#define SWITCH_CFG_1G PORT_FEATURE_CON_SWITCH_1G_SWITCH
|
|
#define SWITCH_CFG_10G PORT_FEATURE_CON_SWITCH_10G_SWITCH
|
|
#define SWITCH_CFG_AUTO_DETECT PORT_FEATURE_CON_SWITCH_AUTO_DETECT
|
|
|
|
u16 hw_led_mode; /* part of the hw_config read from the shmem */
|
|
|
|
/* phy_addr populated by the phy_init function */
|
|
u8 phy_addr;
|
|
/*u8 reserved1;*/
|
|
|
|
u32 lane_config;
|
|
u32 ext_phy_config;
|
|
#define XGXS_EXT_PHY_TYPE(ext_phy_config) \
|
|
((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK)
|
|
#define XGXS_EXT_PHY_ADDR(ext_phy_config) \
|
|
(((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> \
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT)
|
|
#define SERDES_EXT_PHY_TYPE(ext_phy_config) \
|
|
((ext_phy_config) & PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK)
|
|
|
|
/* Phy register parameter */
|
|
u32 chip_id;
|
|
|
|
u16 xgxs_config_rx[4]; /* preemphasis values for the rx side */
|
|
u16 xgxs_config_tx[4]; /* preemphasis values for the tx side */
|
|
|
|
u32 feature_config_flags;
|
|
#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0)
|
|
#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2)
|
|
#define FEATURE_CONFIG_BCM8727_NOC (1<<3)
|
|
|
|
/* Device pointer passed to all callback functions */
|
|
struct bnx2x *bp;
|
|
};
|
|
|
|
/* Output parameters */
|
|
struct link_vars {
|
|
u8 phy_flags;
|
|
|
|
u8 mac_type;
|
|
#define MAC_TYPE_NONE 0
|
|
#define MAC_TYPE_EMAC 1
|
|
#define MAC_TYPE_BMAC 2
|
|
|
|
u8 phy_link_up; /* internal phy link indication */
|
|
u8 link_up;
|
|
|
|
u16 line_speed;
|
|
u16 duplex;
|
|
|
|
u16 flow_ctrl;
|
|
u16 ieee_fc;
|
|
|
|
u32 autoneg;
|
|
#define AUTO_NEG_DISABLED 0x0
|
|
#define AUTO_NEG_ENABLED 0x1
|
|
#define AUTO_NEG_COMPLETE 0x2
|
|
#define AUTO_NEG_PARALLEL_DETECTION_USED 0x3
|
|
|
|
/* The same definitions as the shmem parameter */
|
|
u32 link_status;
|
|
};
|
|
|
|
/***********************************************************/
|
|
/* Functions */
|
|
/***********************************************************/
|
|
|
|
/* Initialize the phy */
|
|
u8 bnx2x_phy_init(struct link_params *input, struct link_vars *output);
|
|
|
|
/* Reset the link. Should be called when driver or interface goes down
|
|
Before calling phy firmware upgrade, the reset_ext_phy should be set
|
|
to 0 */
|
|
u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
|
|
u8 reset_ext_phy);
|
|
|
|
/* bnx2x_link_update should be called upon link interrupt */
|
|
u8 bnx2x_link_update(struct link_params *input, struct link_vars *output);
|
|
|
|
/* use the following cl45 functions to read/write from external_phy
|
|
In order to use it to read/write internal phy registers, use
|
|
DEFAULT_PHY_DEV_ADDR as devad, and (_bank + (_addr & 0xf)) as
|
|
Use ext_phy_type of 0 in case of cl22 over cl45
|
|
the register */
|
|
u8 bnx2x_cl45_read(struct bnx2x *bp, u8 port, u32 ext_phy_type,
|
|
u8 phy_addr, u8 devad, u16 reg, u16 *ret_val);
|
|
|
|
u8 bnx2x_cl45_write(struct bnx2x *bp, u8 port, u32 ext_phy_type,
|
|
u8 phy_addr, u8 devad, u16 reg, u16 val);
|
|
|
|
/* Reads the link_status from the shmem,
|
|
and update the link vars accordingly */
|
|
void bnx2x_link_status_update(struct link_params *input,
|
|
struct link_vars *output);
|
|
/* returns string representing the fw_version of the external phy */
|
|
u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
|
|
u8 *version, u16 len);
|
|
|
|
/* Set/Unset the led
|
|
Basically, the CLC takes care of the led for the link, but in case one needs
|
|
to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to
|
|
blink the led, and LED_MODE_OFF to set the led off.*/
|
|
u8 bnx2x_set_led(struct link_params *params, u8 mode, u32 speed);
|
|
#define LED_MODE_OFF 0
|
|
#define LED_MODE_OPER 2
|
|
|
|
u8 bnx2x_override_led_value(struct bnx2x *bp, u8 port, u32 led_idx, u32 value);
|
|
|
|
/* bnx2x_handle_module_detect_int should be called upon module detection
|
|
interrupt */
|
|
void bnx2x_handle_module_detect_int(struct link_params *params);
|
|
|
|
/* Get the actual link status. In case it returns 0, link is up,
|
|
otherwise link is down*/
|
|
u8 bnx2x_test_link(struct link_params *input, struct link_vars *vars);
|
|
|
|
/* One-time initialization for external phy after power up */
|
|
u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base);
|
|
|
|
/* Reset the external PHY using GPIO */
|
|
void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port);
|
|
|
|
void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr);
|
|
|
|
u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr,
|
|
u8 byte_cnt, u8 *o_buf);
|
|
|
|
#endif /* BNX2X_LINK_H */
|