linux_dsm_epyc7002/drivers/net/phy/bcm-phy-lib.h
Murali Krishna Policharla ab41ca3455 net: phy: bcm7xx: add jumbo frame configuration to PHY
The BCM7XX PHY family requires special configuration to pass jumbo
frames. Do that during initial PHY setup.

Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 16:07:24 -07:00

71 lines
2.3 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2015 Broadcom Corporation
*/
#ifndef _LINUX_BCM_PHY_LIB_H
#define _LINUX_BCM_PHY_LIB_H
#include <linux/brcmphy.h>
#include <linux/phy.h>
/* 28nm only register definitions */
#define MISC_ADDR(base, channel) base, channel
#define DSP_TAP10 MISC_ADDR(0x0a, 0)
#define PLL_PLLCTRL_1 MISC_ADDR(0x32, 1)
#define PLL_PLLCTRL_2 MISC_ADDR(0x32, 2)
#define PLL_PLLCTRL_4 MISC_ADDR(0x33, 0)
#define AFE_RXCONFIG_0 MISC_ADDR(0x38, 0)
#define AFE_RXCONFIG_1 MISC_ADDR(0x38, 1)
#define AFE_RXCONFIG_2 MISC_ADDR(0x38, 2)
#define AFE_RX_LP_COUNTER MISC_ADDR(0x38, 3)
#define AFE_TX_CONFIG MISC_ADDR(0x39, 0)
#define AFE_VDCA_ICTRL_0 MISC_ADDR(0x39, 1)
#define AFE_VDAC_OTHERS_0 MISC_ADDR(0x39, 3)
#define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0)
int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val);
int bcm_phy_read_exp(struct phy_device *phydev, u16 reg);
static inline int bcm_phy_write_exp_sel(struct phy_device *phydev,
u16 reg, u16 val)
{
return bcm_phy_write_exp(phydev, reg | MII_BCM54XX_EXP_SEL_ER, val);
}
int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val);
int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum);
int bcm_phy_write_misc(struct phy_device *phydev,
u16 reg, u16 chl, u16 value);
int bcm_phy_read_misc(struct phy_device *phydev,
u16 reg, u16 chl);
int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow,
u16 val);
int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow);
int bcm_phy_ack_intr(struct phy_device *phydev);
int bcm_phy_config_intr(struct phy_device *phydev);
int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down);
int bcm_phy_set_eee(struct phy_device *phydev, bool enable);
int bcm_phy_downshift_get(struct phy_device *phydev, u8 *count);
int bcm_phy_downshift_set(struct phy_device *phydev, u8 count);
int bcm_phy_get_sset_count(struct phy_device *phydev);
void bcm_phy_get_strings(struct phy_device *phydev, u8 *data);
void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow,
struct ethtool_stats *stats, u64 *data);
void bcm_phy_r_rc_cal_reset(struct phy_device *phydev);
int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev);
int bcm_phy_enable_jumbo(struct phy_device *phydev);
#endif /* _LINUX_BCM_PHY_LIB_H */