linux_dsm_epyc7002/drivers/tty/serial
Mans Rullgard 9b2256c827 serial: 8250: simplify ralink/alchemy register remap selection
Some SoCs, including Ralink/Mediatek and Alchemy Au1xxx, have a
16550-like UART with a non-standard register layout.  These are
supported by a simple mapping table in 8250_port.c  Rather than
list every SoC type using this access mode in the ifdefs there,
allow selecting the SERIAL_8250_RT288X Kconfig option with any
system and default it to y for the known cases needing it.  The
help text is reworded accordingly.

This change simplifies adding support for other SoCs also using
the same UART.

The name of the option is a little misleading, but not knowing
the true origin of this UART, it is as good a choice as any.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04 19:09:21 +01:00
..
8250 serial: 8250: simplify ralink/alchemy register remap selection 2015-10-04 19:09:21 +01:00
cpm_uart tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1 2015-03-26 23:00:36 +01:00
jsm serial: jsm: some off by one bugs 2015-03-26 23:00:36 +01:00
21285.c
68328serial.c serial: 68328serial: Use NULL for pointers 2015-10-04 17:44:52 +01:00
altera_jtaguart.c drivers/tty/serial: altera: fix typos in #endif comments 2015-05-06 22:26:58 +02:00
altera_uart.c serial: altera_uart: Use of_property_read_u32 instead of open-coding it 2015-10-04 17:47:49 +01:00
amba-pl010.c serial: Test/disable MSIs if switching from N_PPS 2014-11-06 14:57:27 -08:00
amba-pl011.c Revert "uart: pl011: Rename regs with enumeration" 2015-09-04 09:14:43 -07:00
apbuart.c tty: constify of_device_id array 2015-03-26 22:49:10 +01:00
apbuart.h
ar933x_uart.c serial: ar933x_uart: Fix off-by-one for checking valid alias id 2015-03-07 03:20:25 +01:00
arc_uart.c tty: serial: drop owner assignment from platform_drivers 2014-10-20 16:21:45 +02:00
atmel_serial.c serial: mctrl-gpio: rename init function 2015-10-04 18:46:43 +01:00
bcm63xx_uart.c tty: serial/bcm63xx_uart: fix sparse warning 2015-03-07 03:13:07 +01:00
bfin_sport_uart.c tty: pr_warning->pr_warn and logging neatening 2014-11-25 17:06:38 -08:00
bfin_sport_uart.h
bfin_uart.c serial: bfin: ctsrts: enfore Kconfig naming convention 2015-05-06 22:26:59 +02:00
clps711x.c serial: mctrl-gpio: rename init function 2015-10-04 18:46:43 +01:00
crisv10.c tty: crisv10.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
crisv10.h cris: Remove obsolete ASYNC_SPLIT_TERMIOS behavior 2014-11-05 20:18:30 -08:00
digicolor-usart.c tty/serial: digicolor: remove sysrq reference 2015-02-02 10:11:25 -08:00
dz.c
dz.h
earlycon-arm-semihost.c
earlycon.c serial: earlycon: Add support for big-endian MMIO accesses 2015-06-01 06:55:12 +09:00
efm32-uart.c tty: serial: drop owner assignment from platform_drivers 2014-10-20 16:21:45 +02:00
etraxfs-uart.c serial: etraxfs-uart: use mctrl_gpio helpers for handling modem signals 2015-08-04 22:07:20 -07:00
fsl_lpuart.c Merge 4.0-rc7 into tty-next 2015-04-07 11:07:20 +02:00
icom.c tty: icom.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
icom.h
ifx6x60.c serial: ifx6x60: Remove superfluous casts when calling request_irq() 2015-05-06 22:27:01 +02:00
ifx6x60.h
imx.c serial: imx: also update RX stats in DMA path 2015-10-04 18:44:29 +01:00
ioc3_serial.c tty: ioc3_serial.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
ioc4_serial.c tty: ioc4_serial.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
ip22zilog.c serial: use container_of to resolve uart_ip22zilog_port from uart_port 2014-11-05 19:20:52 -08:00
ip22zilog.h
Kconfig serial: mxs-auart+imx: allow compile testing on non-Freescale architectures 2015-10-04 18:46:43 +01:00
kgdb_nmi.c serial: kgdb_nmi: Use bool function return values of true/false not 1/0 2015-05-06 22:26:57 +02:00
kgdboc.c
lantiq.c drivers/tty: make serial/lantic.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
lpc32xx_hs.c tty: serial: drop owner assignment from platform_drivers 2014-10-20 16:21:45 +02:00
m32r_sio_reg.h
m32r_sio.c serial: use container_of to resolve uart_sio_port from uart_port 2014-11-05 19:20:52 -08:00
m32r_sio.h
Makefile serial: stm32-usart: Add STM32 USART Driver 2015-06-10 17:34:26 -07:00
max310x.c drivers/max310: Use the rs485 functions on serial_core 2014-11-06 15:00:15 -08:00
max3100.c tty: max3100: use msecs_to_jiffies for time conversion 2015-03-07 03:13:08 +01:00
mcf.c drivers/tty/serial/mcf.c: fix typo on SERIAL_MCF_CONSOLE 2015-05-06 22:26:59 +02:00
men_z135_uart.c tty: serial: men_z135_uart.c: Don't initialize port->lock 2015-08-14 17:14:13 -07:00
meson_uart.c ARM: meson: serial: convert iounmap to devm_iounmap 2015-05-06 22:27:02 +02:00
mpc52xx_uart.c serial: mpc52xx: add delay after resetting transmitter to fix broken chars 2015-10-04 17:27:56 +01:00
mpsc.c drivers/tty: make serial/mpsc.c driver explicitly non-modular 2015-10-04 17:27:56 +01:00
msm_serial.c tty: serial: msm_serial: Remove console unregistration from driver exit. 2015-02-02 10:11:25 -08:00
msm_serial.h tty: serial: msm_serial: Remove dead code 2015-03-26 22:31:09 +01:00
mux.c serial: mux: Convert to uart_console_device instead of open-coded 2015-10-04 17:44:52 +01:00
mxs-auart.c serial: mctrl-gpio: rename init function 2015-10-04 18:46:43 +01:00
netx-serial.c tty: serial: drop owner assignment from platform_drivers 2014-10-20 16:21:45 +02:00
nwpserial.c
of_serial.c serial: of-serial: compile correctly when 8250 driver is compiled as module 2015-10-04 17:47:49 +01:00
omap-serial.c serial: omap: Switch wake-up interrupt to generic wakeirq 2015-06-09 23:35:00 -07:00
pch_uart.c
pmac_zilog.c tty: constify of_device_id array 2015-03-26 22:49:10 +01:00
pmac_zilog.h
pnx8xxx_uart.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
pxa.c tty: constify of_device_id array 2015-03-26 22:49:10 +01:00
rp2.c
sa1100.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
samsung.c serial: samsung: Fix UART status handling in DMA mode 2015-10-04 17:44:52 +01:00
samsung.h serial: samsung: fix DMA mode enter condition for small FIFO sizes 2015-08-04 22:07:23 -07:00
sb1250-duart.c
sc16is7xx.c serial: sc16is7xx: Remove unnecessary MODULE_ALIAS() 2015-10-04 17:44:52 +01:00
sccnxp.c tty: serial: drop owner assignment from platform_drivers 2014-10-20 16:21:45 +02:00
serial_core.c serial: core: Remove tty port activate() and shutdown() methods 2015-08-04 22:07:23 -07:00
serial_ks8695.c tty/serial: kill off set_irq_flags usage 2015-06-09 12:26:32 -07:00
serial_mctrl_gpio.c serial: mctrl_gpio: implement interrupt handling 2015-10-04 18:47:51 +01:00
serial_mctrl_gpio.h serial: mctrl_gpio: implement interrupt handling 2015-10-04 18:47:51 +01:00
serial_txx9.c tty: serial: drop owner assignment from platform_drivers 2014-10-20 16:21:45 +02:00
serial-tegra.c serial: tegra: Fix memory leak on DMA setup failure 2015-05-24 12:53:44 -07:00
sh-sci.c serial: sh-sci: Add DT support to DMA setup 2015-10-04 17:36:10 +01:00
sh-sci.h serial: sh-sci: Correct SCIF_ERROR_CLEAR for plain SCIF 2015-10-04 17:33:48 +01:00
sirfsoc_uart.c serial: sirf: let uart's receive start in right place 2015-07-23 15:32:04 -07:00
sirfsoc_uart.h serial: sirf: let uart's receive start in right place 2015-07-23 15:32:04 -07:00
sn_console.c drivers/tty: make serial/sn_console.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sprd_serial.c serial: sprd: check for NULL after calling devm_clk_get 2015-06-12 17:39:50 -07:00
st-asc.c tty: constify of_device_id array 2015-03-26 22:49:10 +01:00
stm32-usart.c serial: stm32-usart: Fix SysRq support 2015-07-23 17:37:53 -07:00
suncore.c drivers/tty: make serial/suncore.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sunhv.c drivers/tty: make serial/sunhv.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sunsab.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
sunsab.h
sunsu.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
sunzilog.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
sunzilog.h
tilegx.c
timbuart.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
timbuart.h
uartlite.c serial: xilinx: Use platform_get_irq to get irq description structure 2015-04-28 14:26:21 +02:00
ucc_uart.c serial/uuc_uart: Support higher bitrates than 115200 Bit/s 2015-07-23 18:05:00 -07:00
vr41xx_siu.c tty: serial: drop owner assignment from platform_drivers 2014-10-20 16:21:45 +02:00
vt8500_serial.c tty: serial: drop owner assignment from platform_drivers 2014-10-20 16:21:45 +02:00
xilinx_uartps.c serial: xuartps: add __init to earlycon write method 2015-05-10 19:10:08 +02:00
zs.c
zs.h