AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-16 00:36:40 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
9aa65a2b9d
linux_dsm_epyc7002/drivers/gpu/drm/gma500/oaktrail_device.c
Alan Cox 213a84346f gma500: use the register map to clean up 
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-11 17:35:51 +01:00

564 lines
15 KiB
C
Raw Blame History

/**************************************************************************
* Copyright (c) 2011, Intel Corporation.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
**************************************************************************/
#include <linux/backlight.h>
#include <linux/module.h>
#include <linux/dmi.h>
#include <drm/drmP.h>
#include <drm/drm.h>
#include "gma_drm.h"
#include "psb_drv.h"
#include "psb_reg.h"
#include "psb_intel_reg.h"
#include <asm/mrst.h>
#include <asm/intel_scu_ipc.h>
#include "mid_bios.h"
#include "intel_bios.h"
static int oaktrail_output_init(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
if (dev_priv->iLVDS_enable)
oaktrail_lvds_init(dev, &dev_priv->mode_dev);
else
dev_err(dev->dev, "DSI is not supported\n");
if (dev_priv->hdmi_priv)
oaktrail_hdmi_init(dev, &dev_priv->mode_dev);
return 0;
}
/*
* Provide the low level interfaces for the Moorestown backlight
*/
#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF
#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */
#define BLC_PWM_FREQ_CALC_CONSTANT 32
#define MHz 1000000
#define BLC_ADJUSTMENT_MAX 100
static struct backlight_device *oaktrail_backlight_device;
static int oaktrail_brightness;
static int oaktrail_set_brightness(struct backlight_device *bd)
{
struct drm_device *dev = bl_get_data(oaktrail_backlight_device);
struct drm_psb_private *dev_priv = dev->dev_private;
int level = bd->props.brightness;
u32 blc_pwm_ctl;
u32 max_pwm_blc;
/* Percentage 1-100% being valid */
if (level < 1)
level = 1;
if (gma_power_begin(dev, 0)) {
/* Calculate and set the brightness value */
max_pwm_blc = REG_READ(BLC_PWM_CTL) >> 16;
blc_pwm_ctl = level * max_pwm_blc / 100;
/* Adjust the backlight level with the percent in
* dev_priv->blc_adj1;
*/
blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj1;
blc_pwm_ctl = blc_pwm_ctl / 100;
/* Adjust the backlight level with the percent in
* dev_priv->blc_adj2;
*/
blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj2;
blc_pwm_ctl = blc_pwm_ctl / 100;
/* force PWM bit on */
REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
REG_WRITE(BLC_PWM_CTL, (max_pwm_blc << 16) | blc_pwm_ctl);
gma_power_end(dev);
}
oaktrail_brightness = level;
return 0;
}
static int oaktrail_get_brightness(struct backlight_device *bd)
{
/* return locally cached var instead of HW read (due to DPST etc.) */
/* FIXME: ideally return actual value in case firmware fiddled with
it */
return oaktrail_brightness;
}
static int device_backlight_init(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
unsigned long core_clock;
u16 bl_max_freq;
uint32_t value;
uint32_t blc_pwm_precision_factor;
dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX;
dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX;
bl_max_freq = 256;
/* this needs to be set elsewhere */
blc_pwm_precision_factor = BLC_PWM_PRECISION_FACTOR;
core_clock = dev_priv->core_freq;
value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
value *= blc_pwm_precision_factor;
value /= bl_max_freq;
value /= blc_pwm_precision_factor;
if (value > (unsigned long long)MRST_BLC_MAX_PWM_REG_FREQ)
return -ERANGE;
if (gma_power_begin(dev, false)) {
REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
REG_WRITE(BLC_PWM_CTL, value | (value << 16));
gma_power_end(dev);
}
return 0;
}
static const struct backlight_ops oaktrail_ops = {
.get_brightness = oaktrail_get_brightness,
.update_status = oaktrail_set_brightness,
};
static int oaktrail_backlight_init(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
int ret;
struct backlight_properties props;
memset(&props, 0, sizeof(struct backlight_properties));
props.max_brightness = 100;
props.type = BACKLIGHT_PLATFORM;
oaktrail_backlight_device = backlight_device_register("oaktrail-bl",
NULL, (void *)dev, &oaktrail_ops, &props);
if (IS_ERR(oaktrail_backlight_device))
return PTR_ERR(oaktrail_backlight_device);
ret = device_backlight_init(dev);
if (ret < 0) {
backlight_device_unregister(oaktrail_backlight_device);
return ret;
}
oaktrail_backlight_device->props.brightness = 100;
oaktrail_backlight_device->props.max_brightness = 100;
backlight_update_status(oaktrail_backlight_device);
dev_priv->backlight_device = oaktrail_backlight_device;
return 0;
}
#endif
/*
* Provide the Moorestown specific chip logic and low level methods
* for power management
*/
/**
* oaktrail_save_display_registers - save registers lost on suspend
* @dev: our DRM device
*
* Save the state we need in order to be able to restore the interface
* upon resume from suspend
*/
static int oaktrail_save_display_registers(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
struct psb_save_area *regs = &dev_priv->regs;
struct psb_pipe *p = &regs->pipe[0];
int i;
u32 pp_stat;
/* Display arbitration control + watermarks */
regs->psb.saveDSPARB = PSB_RVDC32(DSPARB);
regs->psb.saveDSPFW1 = PSB_RVDC32(DSPFW1);
regs->psb.saveDSPFW2 = PSB_RVDC32(DSPFW2);
regs->psb.saveDSPFW3 = PSB_RVDC32(DSPFW3);
regs->psb.saveDSPFW4 = PSB_RVDC32(DSPFW4);
regs->psb.saveDSPFW5 = PSB_RVDC32(DSPFW5);
regs->psb.saveDSPFW6 = PSB_RVDC32(DSPFW6);
regs->psb.saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);
/* Pipe & plane A info */
p->conf = PSB_RVDC32(PIPEACONF);
p->src = PSB_RVDC32(PIPEASRC);
p->fp0 = PSB_RVDC32(MRST_FPA0);
p->fp1 = PSB_RVDC32(MRST_FPA1);
p->dpll = PSB_RVDC32(MRST_DPLL_A);
p->htotal = PSB_RVDC32(HTOTAL_A);
p->hblank = PSB_RVDC32(HBLANK_A);
p->hsync = PSB_RVDC32(HSYNC_A);
p->vtotal = PSB_RVDC32(VTOTAL_A);
p->vblank = PSB_RVDC32(VBLANK_A);
p->vsync = PSB_RVDC32(VSYNC_A);
regs->psb.saveBCLRPAT_A = PSB_RVDC32(BCLRPAT_A);
p->cntr = PSB_RVDC32(DSPACNTR);
p->stride = PSB_RVDC32(DSPASTRIDE);
p->addr = PSB_RVDC32(DSPABASE);
p->surf = PSB_RVDC32(DSPASURF);
p->linoff = PSB_RVDC32(DSPALINOFF);
p->tileoff = PSB_RVDC32(DSPATILEOFF);
/* Save cursor regs */
regs->psb.saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR);
regs->psb.saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE);
regs->psb.saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS);
/* Save palette (gamma) */
for (i = 0; i < 256; i++)
p->palette[i] = PSB_RVDC32(PALETTE_A + (i << 2));
if (dev_priv->hdmi_priv)
oaktrail_hdmi_save(dev);
/* Save performance state */
regs->psb.savePERF_MODE = PSB_RVDC32(MRST_PERF_MODE);
/* LVDS state */
regs->psb.savePP_CONTROL = PSB_RVDC32(PP_CONTROL);
regs->psb.savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS);
regs->psb.savePFIT_AUTO_RATIOS = PSB_RVDC32(PFIT_AUTO_RATIOS);
regs->saveBLC_PWM_CTL = PSB_RVDC32(BLC_PWM_CTL);
regs->saveBLC_PWM_CTL2 = PSB_RVDC32(BLC_PWM_CTL2);
regs->psb.saveLVDS = PSB_RVDC32(LVDS);
regs->psb.savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL);
regs->psb.savePP_ON_DELAYS = PSB_RVDC32(LVDSPP_ON);
regs->psb.savePP_OFF_DELAYS = PSB_RVDC32(LVDSPP_OFF);
regs->psb.savePP_DIVISOR = PSB_RVDC32(PP_CYCLE);
/* HW overlay */
regs->psb.saveOV_OVADD = PSB_RVDC32(OV_OVADD);
regs->psb.saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0);
regs->psb.saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1);
regs->psb.saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2);
regs->psb.saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3);
regs->psb.saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4);
regs->psb.saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5);
/* DPST registers */
regs->psb.saveHISTOGRAM_INT_CONTROL_REG =
PSB_RVDC32(HISTOGRAM_INT_CONTROL);
regs->psb.saveHISTOGRAM_LOGIC_CONTROL_REG =
PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL);
regs->psb.savePWM_CONTROL_LOGIC = PSB_RVDC32(PWM_CONTROL_LOGIC);
if (dev_priv->iLVDS_enable) {
/* Shut down the panel */
PSB_WVDC32(0, PP_CONTROL);
do {
pp_stat = PSB_RVDC32(PP_STATUS);
} while (pp_stat & 0x80000000);
/* Turn off the plane */
PSB_WVDC32(0x58000000, DSPACNTR);
/* Trigger the plane disable */
PSB_WVDC32(0, DSPASURF);
/* Wait ~4 ticks */
msleep(4);
/* Turn off pipe */
PSB_WVDC32(0x0, PIPEACONF);
/* Wait ~8 ticks */
msleep(8);
/* Turn off PLLs */
PSB_WVDC32(0, MRST_DPLL_A);
}
return 0;
}
/**
* oaktrail_restore_display_registers - restore lost register state
* @dev: our DRM device
*
* Restore register state that was lost during suspend and resume.
*/
static int oaktrail_restore_display_registers(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
struct psb_save_area *regs = &dev_priv->regs;
struct psb_pipe *p = &regs->pipe[0];
u32 pp_stat;
int i;
/* Display arbitration + watermarks */
PSB_WVDC32(regs->psb.saveDSPARB, DSPARB);
PSB_WVDC32(regs->psb.saveDSPFW1, DSPFW1);
PSB_WVDC32(regs->psb.saveDSPFW2, DSPFW2);
PSB_WVDC32(regs->psb.saveDSPFW3, DSPFW3);
PSB_WVDC32(regs->psb.saveDSPFW4, DSPFW4);
PSB_WVDC32(regs->psb.saveDSPFW5, DSPFW5);
PSB_WVDC32(regs->psb.saveDSPFW6, DSPFW6);
PSB_WVDC32(regs->psb.saveCHICKENBIT, DSPCHICKENBIT);
/* Make sure VGA plane is off. it initializes to on after reset!*/
PSB_WVDC32(0x80000000, VGACNTRL);
/* set the plls */
PSB_WVDC32(p->fp0, MRST_FPA0);
PSB_WVDC32(p->fp1, MRST_FPA1);
/* Actually enable it */
PSB_WVDC32(p->dpll, MRST_DPLL_A);
DRM_UDELAY(150);
/* Restore mode */
PSB_WVDC32(p->htotal, HTOTAL_A);
PSB_WVDC32(p->hblank, HBLANK_A);
PSB_WVDC32(p->hsync, HSYNC_A);
PSB_WVDC32(p->vtotal, VTOTAL_A);
PSB_WVDC32(p->vblank, VBLANK_A);
PSB_WVDC32(p->vsync, VSYNC_A);
PSB_WVDC32(p->src, PIPEASRC);
PSB_WVDC32(regs->psb.saveBCLRPAT_A, BCLRPAT_A);
/* Restore performance mode*/
PSB_WVDC32(regs->psb.savePERF_MODE, MRST_PERF_MODE);
/* Enable the pipe*/
if (dev_priv->iLVDS_enable)
PSB_WVDC32(p->conf, PIPEACONF);
/* Set up the plane*/
PSB_WVDC32(p->linoff, DSPALINOFF);
PSB_WVDC32(p->stride, DSPASTRIDE);
PSB_WVDC32(p->tileoff, DSPATILEOFF);
/* Enable the plane */
PSB_WVDC32(p->cntr, DSPACNTR);
PSB_WVDC32(p->surf, DSPASURF);
/* Enable Cursor A */
PSB_WVDC32(regs->psb.saveDSPACURSOR_CTRL, CURACNTR);
PSB_WVDC32(regs->psb.saveDSPACURSOR_POS, CURAPOS);
PSB_WVDC32(regs->psb.saveDSPACURSOR_BASE, CURABASE);
/* Restore palette (gamma) */
for (i = 0; i < 256; i++)
PSB_WVDC32(p->palette[i], PALETTE_A + (i << 2));
if (dev_priv->hdmi_priv)
oaktrail_hdmi_restore(dev);
if (dev_priv->iLVDS_enable) {
PSB_WVDC32(regs->saveBLC_PWM_CTL2, BLC_PWM_CTL2);
PSB_WVDC32(regs->psb.saveLVDS, LVDS); /*port 61180h*/
PSB_WVDC32(regs->psb.savePFIT_CONTROL, PFIT_CONTROL);
PSB_WVDC32(regs->psb.savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS);
PSB_WVDC32(regs->psb.savePFIT_AUTO_RATIOS, PFIT_AUTO_RATIOS);
PSB_WVDC32(regs->saveBLC_PWM_CTL, BLC_PWM_CTL);
PSB_WVDC32(regs->psb.savePP_ON_DELAYS, LVDSPP_ON);
PSB_WVDC32(regs->psb.savePP_OFF_DELAYS, LVDSPP_OFF);
PSB_WVDC32(regs->psb.savePP_DIVISOR, PP_CYCLE);
PSB_WVDC32(regs->psb.savePP_CONTROL, PP_CONTROL);
}
/* Wait for cycle delay */
do {
pp_stat = PSB_RVDC32(PP_STATUS);
} while (pp_stat & 0x08000000);
/* Wait for panel power up */
do {
pp_stat = PSB_RVDC32(PP_STATUS);
} while (pp_stat & 0x10000000);
/* Restore HW overlay */
PSB_WVDC32(regs->psb.saveOV_OVADD, OV_OVADD);
PSB_WVDC32(regs->psb.saveOV_OGAMC0, OV_OGAMC0);
PSB_WVDC32(regs->psb.saveOV_OGAMC1, OV_OGAMC1);
PSB_WVDC32(regs->psb.saveOV_OGAMC2, OV_OGAMC2);
PSB_WVDC32(regs->psb.saveOV_OGAMC3, OV_OGAMC3);
PSB_WVDC32(regs->psb.saveOV_OGAMC4, OV_OGAMC4);
PSB_WVDC32(regs->psb.saveOV_OGAMC5, OV_OGAMC5);
/* DPST registers */
PSB_WVDC32(regs->psb.saveHISTOGRAM_INT_CONTROL_REG,
HISTOGRAM_INT_CONTROL);
PSB_WVDC32(regs->psb.saveHISTOGRAM_LOGIC_CONTROL_REG,
HISTOGRAM_LOGIC_CONTROL);
PSB_WVDC32(regs->psb.savePWM_CONTROL_LOGIC, PWM_CONTROL_LOGIC);
return 0;
}
/**
* oaktrail_power_down - power down the display island
* @dev: our DRM device
*
* Power down the display interface of our device
*/
static int oaktrail_power_down(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
u32 pwr_mask ;
u32 pwr_sts;
pwr_mask = PSB_PWRGT_DISPLAY_MASK;
outl(pwr_mask, dev_priv->ospm_base + PSB_PM_SSC);
while (true) {
pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
if ((pwr_sts & pwr_mask) == pwr_mask)
break;
else
udelay(10);
}
return 0;
}
/*
* oaktrail_power_up
*
* Restore power to the specified island(s) (powergating)
*/
static int oaktrail_power_up(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
u32 pwr_mask = PSB_PWRGT_DISPLAY_MASK;
u32 pwr_sts, pwr_cnt;
pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
pwr_cnt &= ~pwr_mask;
outl(pwr_cnt, (dev_priv->ospm_base + PSB_PM_SSC));
while (true) {
pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
if ((pwr_sts & pwr_mask) == 0)
break;
else
udelay(10);
}
return 0;
}
/* Oaktrail */
static const struct psb_offset oaktrail_regmap[2] = {
{
.fp0 = MRST_FPA0,
.fp1 = MRST_FPA1,
.cntr = DSPACNTR,
.conf = PIPEACONF,
.src = PIPEASRC,
.dpll = MRST_DPLL_A,
.htotal = HTOTAL_A,
.hblank = HBLANK_A,
.hsync = HSYNC_A,
.vtotal = VTOTAL_A,
.vblank = VBLANK_A,
.vsync = VSYNC_A,
.stride = DSPASTRIDE,
.size = DSPASIZE,
.pos = DSPAPOS,
.surf = DSPASURF,
.addr = MRST_DSPABASE,
.status = PIPEASTAT,
.linoff = DSPALINOFF,
.tileoff = DSPATILEOFF,
.palette = PALETTE_A,
},
{
.fp0 = FPB0,
.fp1 = FPB1,
.cntr = DSPBCNTR,
.conf = PIPEBCONF,
.src = PIPEBSRC,
.dpll = DPLL_B,
.htotal = HTOTAL_B,
.hblank = HBLANK_B,
.hsync = HSYNC_B,
.vtotal = VTOTAL_B,
.vblank = VBLANK_B,
.vsync = VSYNC_B,
.stride = DSPBSTRIDE,
.size = DSPBSIZE,
.pos = DSPBPOS,
.surf = DSPBSURF,
.addr = DSPBBASE,
.status = PIPEBSTAT,
.linoff = DSPBLINOFF,
.tileoff = DSPBTILEOFF,
.palette = PALETTE_B,
},
};
static int oaktrail_chip_setup(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
int ret;
dev_priv->regmap = oaktrail_regmap;
ret = mid_chip_setup(dev);
if (ret < 0)
return ret;
if (!dev_priv->has_gct) {
/* Now pull the BIOS data */
psb_intel_opregion_init(dev);
psb_intel_init_bios(dev);
}
oaktrail_hdmi_setup(dev);
return 0;
}
static void oaktrail_teardown(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
oaktrail_hdmi_teardown(dev);
if (!dev_priv->has_gct)
psb_intel_destroy_bios(dev);
}
const struct psb_ops oaktrail_chip_ops = {
.name = "Oaktrail",
.accel_2d = 1,
.pipes = 2,
.crtcs = 2,
.hdmi_mask = (1 << 0),
.lvds_mask = (1 << 0),
.sgx_offset = MRST_SGX_OFFSET,
.chip_setup = oaktrail_chip_setup,
.chip_teardown = oaktrail_teardown,
.crtc_helper = &oaktrail_helper_funcs,
.crtc_funcs = &psb_intel_crtc_funcs,
.output_init = oaktrail_output_init,
#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
.backlight_init = oaktrail_backlight_init,
#endif
.save_regs = oaktrail_save_display_registers,
.restore_regs = oaktrail_restore_display_registers,
.power_down = oaktrail_power_down,
.power_up = oaktrail_power_up,
.i2c_bus = 1,
};
Reference in New Issue View Git Blame Copy Permalink