mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 21:26:40 +07:00
5c73cc4b6c
As always, this tends to be one of our bigger branches. There are lots of
updates this release, but not that many jumps out as something that needs
more detailed coverage. Some of the highlights are:
- DTs for the new Annapurna Labs Alpine platform
- More graphics DT pieces falling into place on Exynos, bridges, clocks.
- Plenty of DT updates for Qualcomm platforms for various IP blocks
- Some churn on Tegra due to switch-over to tool-generated pinctrl data
- Misc fixes and updates for Atmel at91 platforms
- Various DT updates to add IP block support on Broadcom's Cygnus platforms
- More updates for Renesas platforms as DT support is added for various IP
blocks (IPMMU, display, audio, etc).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wqhB
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM DT updates from Olof Johansson:
"As always, this tends to be one of our bigger branches. There are
lots of updates this release, but not that many jumps out as something
that needs more detailed coverage. Some of the highlights are:
- DTs for the new Annapurna Labs Alpine platform
- more graphics DT pieces falling into place on Exynos, bridges,
clocks.
- plenty of DT updates for Qualcomm platforms for various IP blocks
- some churn on Tegra due to switch-over to tool-generated pinctrl
data
- misc fixes and updates for Atmel at91 platforms
- various DT updates to add IP block support on Broadcom's Cygnus
platforms
- more updates for Renesas platforms as DT support is added for
various IP blocks (IPMMU, display, audio, etc)"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (231 commits)
ARM: dts: alpine: add internal pci
Revert "ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135."
ARM: mvebu: use 0xf1000000 as internal registers on Armada 370 DB
ARM: dts: qcom: Add idle state device nodes for 8064
ARM: dts: qcom: Add idle states device nodes for 8084
ARM: dts: qcom: Add idle states device nodes for 8974/8074
ARM: dts: qcom: Update power-controller device node for 8064 Krait CPUs
ARM: dts: qcom: Add power-controller device node for 8084 Krait CPUs
ARM: dts: qcom: Add power-controller device node for 8074 Krait CPUs
devicetree: bindings: Document qcom,idle-states
devicetree: bindings: Update qcom,saw2 node bindings
dt-bindings: Add #defines for MSM8916 clocks and resets
arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device tree
arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodes
arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodes
arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974
arm: dts: qcom: Add LCC nodes
arm: dts: qcom: Add TCSR support for MSM8960
arm: dts: qcom: Add TCSR support for MSM8660
arm: dts: qcom: Add TCSR support for IPQ8064
...
700 lines
15 KiB
Plaintext
700 lines
15 KiB
Plaintext
/*
|
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "omap443x.dtsi"
|
|
#include "elpida_ecb240abacn.dtsi"
|
|
|
|
/ {
|
|
model = "TI OMAP4 SDP board";
|
|
compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x40000000>; /* 1 GB */
|
|
};
|
|
|
|
aliases {
|
|
display0 = &lcd0;
|
|
display1 = &lcd1;
|
|
display2 = &hdmi0;
|
|
};
|
|
|
|
vdd_eth: fixedregulator-vdd-eth {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VDD_ETH";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio2 16 0>; /* gpio line 48 */
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vbat: fixedregulator-vbat {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VBAT";
|
|
regulator-min-microvolt = <3750000>;
|
|
regulator-max-microvolt = <3750000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
debug0 {
|
|
label = "omap4:green:debug0";
|
|
gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
|
|
};
|
|
|
|
debug1 {
|
|
label = "omap4:green:debug1";
|
|
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
|
|
};
|
|
|
|
debug2 {
|
|
label = "omap4:green:debug2";
|
|
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
|
|
};
|
|
|
|
debug3 {
|
|
label = "omap4:green:debug3";
|
|
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
|
|
};
|
|
|
|
debug4 {
|
|
label = "omap4:green:debug4";
|
|
gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
|
|
};
|
|
|
|
user1 {
|
|
label = "omap4:blue:user";
|
|
gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
|
|
};
|
|
|
|
user2 {
|
|
label = "omap4:red:user";
|
|
gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
|
|
};
|
|
|
|
user3 {
|
|
label = "omap4:green:user";
|
|
gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
|
|
};
|
|
};
|
|
|
|
pwmleds {
|
|
compatible = "pwm-leds";
|
|
kpad {
|
|
label = "omap4::keypad";
|
|
pwms = <&twl_pwm 0 7812500>;
|
|
max-brightness = <127>;
|
|
};
|
|
|
|
charging {
|
|
label = "omap4:green:chrg";
|
|
pwms = <&twl_pwmled 0 7812500>;
|
|
max-brightness = <255>;
|
|
};
|
|
};
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&twl_pwm 1 7812500>;
|
|
brightness-levels = <
|
|
0 10 20 30 40
|
|
50 60 70 80 90
|
|
100 110 120 127
|
|
>;
|
|
default-brightness-level = <13>;
|
|
};
|
|
|
|
sound {
|
|
compatible = "ti,abe-twl6040";
|
|
ti,model = "SDP4430";
|
|
|
|
ti,jack-detection = <1>;
|
|
ti,mclk-freq = <38400000>;
|
|
|
|
ti,mcpdm = <&mcpdm>;
|
|
ti,dmic = <&dmic>;
|
|
|
|
ti,twl6040 = <&twl6040>;
|
|
|
|
/* Audio routing */
|
|
ti,audio-routing =
|
|
"Headset Stereophone", "HSOL",
|
|
"Headset Stereophone", "HSOR",
|
|
"Earphone Spk", "EP",
|
|
"Ext Spk", "HFL",
|
|
"Ext Spk", "HFR",
|
|
"Line Out", "AUXL",
|
|
"Line Out", "AUXR",
|
|
"Vibrator", "VIBRAL",
|
|
"Vibrator", "VIBRAR",
|
|
"HSMIC", "Headset Mic",
|
|
"Headset Mic", "Headset Mic Bias",
|
|
"MAINMIC", "Main Handset Mic",
|
|
"Main Handset Mic", "Main Mic Bias",
|
|
"SUBMIC", "Sub Handset Mic",
|
|
"Sub Handset Mic", "Main Mic Bias",
|
|
"AFML", "Line In",
|
|
"AFMR", "Line In",
|
|
"DMic", "Digital Mic",
|
|
"Digital Mic", "Digital Mic1 Bias";
|
|
};
|
|
|
|
/* regulator for wl12xx on sdio5 */
|
|
wl12xx_vmmc: wl12xx_vmmc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wl12xx_gpio>;
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vwl1271";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
gpio = <&gpio2 22 0>;
|
|
startup-delay-us = <70000>;
|
|
enable-active-high;
|
|
};
|
|
|
|
tpd12s015: encoder@0 {
|
|
compatible = "ti,tpd12s015";
|
|
|
|
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
|
|
<&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
|
|
<&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
tpd12s015_in: endpoint@0 {
|
|
remote-endpoint = <&hdmi_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
tpd12s015_out: endpoint@0 {
|
|
remote-endpoint = <&hdmi_connector_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
hdmi0: connector@0 {
|
|
compatible = "hdmi-connector";
|
|
label = "hdmi";
|
|
|
|
type = "c";
|
|
|
|
port {
|
|
hdmi_connector_in: endpoint {
|
|
remote-endpoint = <&tpd12s015_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&omap4_pmx_core {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <
|
|
&dss_hdmi_pins
|
|
&tpd12s015_pins
|
|
>;
|
|
|
|
uart2_pins: pinmux_uart2_pins {
|
|
pinctrl-single,pins = <
|
|
0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
|
|
0xda (PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
|
|
0xdc (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
|
|
0xde (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
|
|
>;
|
|
};
|
|
|
|
uart3_pins: pinmux_uart3_pins {
|
|
pinctrl-single,pins = <
|
|
0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
|
|
0x102 (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
|
|
0x104 (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
|
|
0x106 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
|
|
>;
|
|
};
|
|
|
|
uart4_pins: pinmux_uart4_pins {
|
|
pinctrl-single,pins = <
|
|
0x11c (PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */
|
|
0x11e (PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */
|
|
>;
|
|
};
|
|
|
|
twl6040_pins: pinmux_twl6040_pins {
|
|
pinctrl-single,pins = <
|
|
0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
|
|
0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
|
|
>;
|
|
};
|
|
|
|
mcpdm_pins: pinmux_mcpdm_pins {
|
|
pinctrl-single,pins = <
|
|
0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
|
|
0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
|
|
0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
|
|
0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
|
|
0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
|
|
>;
|
|
};
|
|
|
|
dmic_pins: pinmux_dmic_pins {
|
|
pinctrl-single,pins = <
|
|
0xd0 (PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
|
|
0xd2 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
|
|
0xd4 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
|
|
0xd6 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
|
|
>;
|
|
};
|
|
|
|
mcbsp1_pins: pinmux_mcbsp1_pins {
|
|
pinctrl-single,pins = <
|
|
0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
|
|
0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
|
|
0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
|
|
0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
|
|
>;
|
|
};
|
|
|
|
mcbsp2_pins: pinmux_mcbsp2_pins {
|
|
pinctrl-single,pins = <
|
|
0xb6 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
|
|
0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
|
|
0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
|
|
0xbc (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
|
|
>;
|
|
};
|
|
|
|
mcspi1_pins: pinmux_mcspi1_pins {
|
|
pinctrl-single,pins = <
|
|
0xf2 (PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
|
|
0xf4 (PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
|
|
0xf6 (PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
|
|
0xf8 (PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
|
|
>;
|
|
};
|
|
|
|
dss_hdmi_pins: pinmux_dss_hdmi_pins {
|
|
pinctrl-single,pins = <
|
|
0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
|
|
0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
|
|
0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
|
|
>;
|
|
};
|
|
|
|
tpd12s015_pins: pinmux_tpd12s015_pins {
|
|
pinctrl-single,pins = <
|
|
0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
|
|
0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
|
|
0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
|
|
>;
|
|
};
|
|
|
|
i2c1_pins: pinmux_i2c1_pins {
|
|
pinctrl-single,pins = <
|
|
0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
|
|
0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
|
|
>;
|
|
};
|
|
|
|
i2c2_pins: pinmux_i2c2_pins {
|
|
pinctrl-single,pins = <
|
|
0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
|
|
0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
|
|
>;
|
|
};
|
|
|
|
i2c3_pins: pinmux_i2c3_pins {
|
|
pinctrl-single,pins = <
|
|
0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
|
|
0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
|
|
>;
|
|
};
|
|
|
|
i2c4_pins: pinmux_i2c4_pins {
|
|
pinctrl-single,pins = <
|
|
0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
|
|
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
|
|
>;
|
|
};
|
|
|
|
/* wl12xx GPIO output for WLAN_EN */
|
|
wl12xx_gpio: pinmux_wl12xx_gpio {
|
|
pinctrl-single,pins = <
|
|
0x3c (PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */
|
|
>;
|
|
};
|
|
|
|
/* wl12xx GPIO inputs and SDIO pins */
|
|
wl12xx_pins: pinmux_wl12xx_pins {
|
|
pinctrl-single,pins = <
|
|
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
|
|
0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
|
|
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
|
|
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
|
|
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
|
|
0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
|
|
0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
twl: twl@48 {
|
|
reg = <0x48>;
|
|
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
|
|
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
|
|
};
|
|
|
|
twl6040: twl@4b {
|
|
compatible = "ti,twl6040";
|
|
reg = <0x4b>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&twl6040_pins>;
|
|
|
|
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
|
|
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
|
|
ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
|
|
|
|
vio-supply = <&v1v8>;
|
|
v2v1-supply = <&v2v1>;
|
|
enable-active-high;
|
|
|
|
/* regulators for vibra motor */
|
|
vddvibl-supply = <&vbat>;
|
|
vddvibr-supply = <&vbat>;
|
|
|
|
vibra {
|
|
/* Vibra driver, motor resistance parameters */
|
|
ti,vibldrv-res = <8>;
|
|
ti,vibrdrv-res = <3>;
|
|
ti,viblmotor-res = <10>;
|
|
ti,vibrmotor-res = <10>;
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "twl6030.dtsi"
|
|
#include "twl6030_omap4.dtsi"
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_pins>;
|
|
|
|
clock-frequency = <400000>;
|
|
};
|
|
|
|
&i2c3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c3_pins>;
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
/*
|
|
* Temperature Sensor
|
|
* http://www.ti.com/lit/ds/symlink/tmp105.pdf
|
|
*/
|
|
tmp105@48 {
|
|
compatible = "ti,tmp105";
|
|
reg = <0x48>;
|
|
};
|
|
|
|
/*
|
|
* Ambient Light Sensor
|
|
* http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
|
|
*/
|
|
bh1780@29 {
|
|
compatible = "rohm,bh1780";
|
|
reg = <0x29>;
|
|
};
|
|
};
|
|
|
|
&i2c4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4_pins>;
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
/*
|
|
* 3-Axis Digital Compass
|
|
* http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
|
|
*/
|
|
hmc5843@1e {
|
|
compatible = "honeywell,hmc5843";
|
|
reg = <0x1e>;
|
|
};
|
|
};
|
|
|
|
&mcspi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcspi1_pins>;
|
|
|
|
eth@0 {
|
|
compatible = "ks8851";
|
|
spi-max-frequency = <24000000>;
|
|
reg = <0>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
|
|
vdd-supply = <&vdd_eth>;
|
|
};
|
|
};
|
|
|
|
&mmc1 {
|
|
vmmc-supply = <&vmmc>;
|
|
bus-width = <8>;
|
|
};
|
|
|
|
&mmc2 {
|
|
vmmc-supply = <&vaux1>;
|
|
bus-width = <8>;
|
|
ti,non-removable;
|
|
};
|
|
|
|
&mmc3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mmc4 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mmc5 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wl12xx_pins>;
|
|
vmmc-supply = <&wl12xx_vmmc>;
|
|
non-removable;
|
|
bus-width = <4>;
|
|
cap-power-off-card;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
wlcore: wlcore@2 {
|
|
compatible = "ti,wl1281";
|
|
reg = <2>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
|
|
ref-clock-frequency = <26000000>;
|
|
tcxo-clock-frequency = <26000000>;
|
|
};
|
|
};
|
|
|
|
&emif1 {
|
|
cs1-used;
|
|
device-handle = <&elpida_ECB240ABACN>;
|
|
};
|
|
|
|
&emif2 {
|
|
cs1-used;
|
|
device-handle = <&elpida_ECB240ABACN>;
|
|
};
|
|
|
|
&keypad {
|
|
keypad,num-rows = <8>;
|
|
keypad,num-columns = <8>;
|
|
linux,keymap = <0x00000012 /* KEY_E */
|
|
0x00010013 /* KEY_R */
|
|
0x00020014 /* KEY_T */
|
|
0x00030066 /* KEY_HOME */
|
|
0x0004003f /* KEY_F5 */
|
|
0x000500f0 /* KEY_UNKNOWN */
|
|
0x00060017 /* KEY_I */
|
|
0x0007002a /* KEY_LEFTSHIFT */
|
|
0x01000020 /* KEY_D*/
|
|
0x01010021 /* KEY_F */
|
|
0x01020022 /* KEY_G */
|
|
0x010300e7 /* KEY_SEND */
|
|
0x01040040 /* KEY_F6 */
|
|
0x010500f0 /* KEY_UNKNOWN */
|
|
0x01060025 /* KEY_K */
|
|
0x0107001c /* KEY_ENTER */
|
|
0x0200002d /* KEY_X */
|
|
0x0201002e /* KEY_C */
|
|
0x0202002f /* KEY_V */
|
|
0x0203006b /* KEY_END */
|
|
0x02040041 /* KEY_F7 */
|
|
0x020500f0 /* KEY_UNKNOWN */
|
|
0x02060034 /* KEY_DOT */
|
|
0x0207003a /* KEY_CAPSLOCK */
|
|
0x0300002c /* KEY_Z */
|
|
0x0301004e /* KEY_KPLUS */
|
|
0x03020030 /* KEY_B */
|
|
0x0303003b /* KEY_F1 */
|
|
0x03040042 /* KEY_F8 */
|
|
0x030500f0 /* KEY_UNKNOWN */
|
|
0x03060018 /* KEY_O */
|
|
0x03070039 /* KEY_SPACE */
|
|
0x04000011 /* KEY_W */
|
|
0x04010015 /* KEY_Y */
|
|
0x04020016 /* KEY_U */
|
|
0x0403003c /* KEY_F2 */
|
|
0x04040073 /* KEY_VOLUMEUP */
|
|
0x040500f0 /* KEY_UNKNOWN */
|
|
0x04060026 /* KEY_L */
|
|
0x04070069 /* KEY_LEFT */
|
|
0x0500001f /* KEY_S */
|
|
0x05010023 /* KEY_H */
|
|
0x05020024 /* KEY_J */
|
|
0x0503003d /* KEY_F3 */
|
|
0x05040043 /* KEY_F9 */
|
|
0x05050072 /* KEY_VOLUMEDOWN */
|
|
0x05060032 /* KEY_M */
|
|
0x0507006a /* KEY_RIGHT */
|
|
0x06000010 /* KEY_Q */
|
|
0x0601001e /* KEY_A */
|
|
0x06020031 /* KEY_N */
|
|
0x0603009e /* KEY_BACK */
|
|
0x0604000e /* KEY_BACKSPACE */
|
|
0x060500f0 /* KEY_UNKNOWN */
|
|
0x06060019 /* KEY_P */
|
|
0x06070067 /* KEY_UP */
|
|
0x07000094 /* KEY_PROG1 */
|
|
0x07010095 /* KEY_PROG2 */
|
|
0x070200ca /* KEY_PROG3 */
|
|
0x070300cb /* KEY_PROG4 */
|
|
0x0704003e /* KEY_F4 */
|
|
0x070500f0 /* KEY_UNKNOWN */
|
|
0x07060160 /* KEY_OK */
|
|
0x0707006c>; /* KEY_DOWN */
|
|
linux,input-no-autorepeat;
|
|
};
|
|
|
|
&uart2 {
|
|
interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
|
|
&omap4_pmx_core OMAP4_UART2_RX>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_pins>;
|
|
};
|
|
|
|
&uart3 {
|
|
interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
|
|
&omap4_pmx_core OMAP4_UART3_RX>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart3_pins>;
|
|
};
|
|
|
|
&uart4 {
|
|
interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
|
|
&omap4_pmx_core OMAP4_UART4_RX>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart4_pins>;
|
|
};
|
|
|
|
&mcbsp1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcbsp1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mcbsp2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcbsp2_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&dmic {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dmic_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mcpdm {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcpdm_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&twl_usb_comparator {
|
|
usb-supply = <&vusb>;
|
|
};
|
|
|
|
&usb_otg_hs {
|
|
interface-type = <1>;
|
|
mode = <3>;
|
|
power = <50>;
|
|
};
|
|
|
|
&dss {
|
|
status = "ok";
|
|
};
|
|
|
|
&dsi1 {
|
|
status = "ok";
|
|
vdd-supply = <&vcxio>;
|
|
|
|
port {
|
|
dsi1_out_ep: endpoint {
|
|
remote-endpoint = <&lcd0_in>;
|
|
lanes = <0 1 2 3 4 5>;
|
|
};
|
|
};
|
|
|
|
lcd0: display {
|
|
compatible = "tpo,taal", "panel-dsi-cm";
|
|
label = "lcd0";
|
|
|
|
reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
|
|
|
|
port {
|
|
lcd0_in: endpoint {
|
|
remote-endpoint = <&dsi1_out_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&dsi2 {
|
|
status = "ok";
|
|
vdd-supply = <&vcxio>;
|
|
|
|
port {
|
|
dsi2_out_ep: endpoint {
|
|
remote-endpoint = <&lcd1_in>;
|
|
lanes = <0 1 2 3 4 5>;
|
|
};
|
|
};
|
|
|
|
lcd1: display {
|
|
compatible = "tpo,taal", "panel-dsi-cm";
|
|
label = "lcd1";
|
|
|
|
reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
|
|
|
|
port {
|
|
lcd1_in: endpoint {
|
|
remote-endpoint = <&dsi2_out_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&hdmi {
|
|
status = "ok";
|
|
vdda-supply = <&vdac>;
|
|
|
|
port {
|
|
hdmi_out: endpoint {
|
|
remote-endpoint = <&tpd12s015_in>;
|
|
};
|
|
};
|
|
};
|