mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 02:35:29 +07:00
44cb6a7df1
add Tegra132 specific SOC_THERM driver. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
686 lines
19 KiB
C
686 lines
19 KiB
C
/*
|
|
* Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
|
|
*
|
|
* Author:
|
|
* Mikko Perttunen <mperttunen@nvidia.com>
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/debugfs.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/thermal.h>
|
|
|
|
#include <dt-bindings/thermal/tegra124-soctherm.h>
|
|
|
|
#include "soctherm.h"
|
|
|
|
#define SENSOR_CONFIG0 0
|
|
#define SENSOR_CONFIG0_STOP BIT(0)
|
|
#define SENSOR_CONFIG0_CPTR_OVER BIT(2)
|
|
#define SENSOR_CONFIG0_OVER BIT(3)
|
|
#define SENSOR_CONFIG0_TCALC_OVER BIT(4)
|
|
#define SENSOR_CONFIG0_TALL_MASK (0xfffff << 8)
|
|
#define SENSOR_CONFIG0_TALL_SHIFT 8
|
|
|
|
#define SENSOR_CONFIG1 4
|
|
#define SENSOR_CONFIG1_TSAMPLE_MASK 0x3ff
|
|
#define SENSOR_CONFIG1_TSAMPLE_SHIFT 0
|
|
#define SENSOR_CONFIG1_TIDDQ_EN_MASK (0x3f << 15)
|
|
#define SENSOR_CONFIG1_TIDDQ_EN_SHIFT 15
|
|
#define SENSOR_CONFIG1_TEN_COUNT_MASK (0x3f << 24)
|
|
#define SENSOR_CONFIG1_TEN_COUNT_SHIFT 24
|
|
#define SENSOR_CONFIG1_TEMP_ENABLE BIT(31)
|
|
|
|
/*
|
|
* SENSOR_CONFIG2 is defined in soctherm.h
|
|
* because, it will be used by tegra_soctherm_fuse.c
|
|
*/
|
|
|
|
#define SENSOR_STATUS0 0xc
|
|
#define SENSOR_STATUS0_VALID_MASK BIT(31)
|
|
#define SENSOR_STATUS0_CAPTURE_MASK 0xffff
|
|
|
|
#define SENSOR_STATUS1 0x10
|
|
#define SENSOR_STATUS1_TEMP_VALID_MASK BIT(31)
|
|
#define SENSOR_STATUS1_TEMP_MASK 0xffff
|
|
|
|
#define READBACK_VALUE_MASK 0xff00
|
|
#define READBACK_VALUE_SHIFT 8
|
|
#define READBACK_ADD_HALF BIT(7)
|
|
#define READBACK_NEGATE BIT(0)
|
|
|
|
/* get val from register(r) mask bits(m) */
|
|
#define REG_GET_MASK(r, m) (((r) & (m)) >> (ffs(m) - 1))
|
|
/* set val(v) to mask bits(m) of register(r) */
|
|
#define REG_SET_MASK(r, m, v) (((r) & ~(m)) | \
|
|
(((v) & (m >> (ffs(m) - 1))) << (ffs(m) - 1)))
|
|
|
|
static const int min_low_temp = -127000;
|
|
static const int max_high_temp = 127000;
|
|
|
|
struct tegra_thermctl_zone {
|
|
void __iomem *reg;
|
|
struct device *dev;
|
|
struct thermal_zone_device *tz;
|
|
const struct tegra_tsensor_group *sg;
|
|
};
|
|
|
|
struct tegra_soctherm {
|
|
struct reset_control *reset;
|
|
struct clk *clock_tsensor;
|
|
struct clk *clock_soctherm;
|
|
void __iomem *regs;
|
|
struct thermal_zone_device **thermctl_tzs;
|
|
|
|
u32 *calib;
|
|
struct tegra_soctherm_soc *soc;
|
|
|
|
struct dentry *debugfs_dir;
|
|
};
|
|
|
|
static void enable_tsensor(struct tegra_soctherm *tegra, unsigned int i)
|
|
{
|
|
const struct tegra_tsensor *sensor = &tegra->soc->tsensors[i];
|
|
void __iomem *base = tegra->regs + sensor->base;
|
|
unsigned int val;
|
|
|
|
val = sensor->config->tall << SENSOR_CONFIG0_TALL_SHIFT;
|
|
writel(val, base + SENSOR_CONFIG0);
|
|
|
|
val = (sensor->config->tsample - 1) << SENSOR_CONFIG1_TSAMPLE_SHIFT;
|
|
val |= sensor->config->tiddq_en << SENSOR_CONFIG1_TIDDQ_EN_SHIFT;
|
|
val |= sensor->config->ten_count << SENSOR_CONFIG1_TEN_COUNT_SHIFT;
|
|
val |= SENSOR_CONFIG1_TEMP_ENABLE;
|
|
writel(val, base + SENSOR_CONFIG1);
|
|
|
|
writel(tegra->calib[i], base + SENSOR_CONFIG2);
|
|
}
|
|
|
|
/*
|
|
* Translate from soctherm readback format to millicelsius.
|
|
* The soctherm readback format in bits is as follows:
|
|
* TTTTTTTT H______N
|
|
* where T's contain the temperature in Celsius,
|
|
* H denotes an addition of 0.5 Celsius and N denotes negation
|
|
* of the final value.
|
|
*/
|
|
static int translate_temp(u16 val)
|
|
{
|
|
int t;
|
|
|
|
t = ((val & READBACK_VALUE_MASK) >> READBACK_VALUE_SHIFT) * 1000;
|
|
if (val & READBACK_ADD_HALF)
|
|
t += 500;
|
|
if (val & READBACK_NEGATE)
|
|
t *= -1;
|
|
|
|
return t;
|
|
}
|
|
|
|
static int tegra_thermctl_get_temp(void *data, int *out_temp)
|
|
{
|
|
struct tegra_thermctl_zone *zone = data;
|
|
u32 val;
|
|
|
|
val = readl(zone->reg);
|
|
val = REG_GET_MASK(val, zone->sg->sensor_temp_mask);
|
|
*out_temp = translate_temp(val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
thermtrip_program(struct device *dev, const struct tegra_tsensor_group *sg,
|
|
int trip_temp);
|
|
|
|
static int tegra_thermctl_set_trip_temp(void *data, int trip, int temp)
|
|
{
|
|
struct tegra_thermctl_zone *zone = data;
|
|
struct thermal_zone_device *tz = zone->tz;
|
|
const struct tegra_tsensor_group *sg = zone->sg;
|
|
struct device *dev = zone->dev;
|
|
enum thermal_trip_type type;
|
|
int ret;
|
|
|
|
if (!tz)
|
|
return -EINVAL;
|
|
|
|
ret = tz->ops->get_trip_type(tz, trip, &type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (type != THERMAL_TRIP_CRITICAL)
|
|
return 0;
|
|
|
|
return thermtrip_program(dev, sg, temp);
|
|
}
|
|
|
|
static const struct thermal_zone_of_device_ops tegra_of_thermal_ops = {
|
|
.get_temp = tegra_thermctl_get_temp,
|
|
.set_trip_temp = tegra_thermctl_set_trip_temp,
|
|
};
|
|
|
|
/**
|
|
* enforce_temp_range() - check and enforce temperature range [min, max]
|
|
* @trip_temp: the trip temperature to check
|
|
*
|
|
* Checks and enforces the permitted temperature range that SOC_THERM
|
|
* HW can support This is
|
|
* done while taking care of precision.
|
|
*
|
|
* Return: The precision adjusted capped temperature in millicelsius.
|
|
*/
|
|
static int enforce_temp_range(struct device *dev, int trip_temp)
|
|
{
|
|
int temp;
|
|
|
|
temp = clamp_val(trip_temp, min_low_temp, max_high_temp);
|
|
if (temp != trip_temp)
|
|
dev_info(dev, "soctherm: trip temperature %d forced to %d\n",
|
|
trip_temp, temp);
|
|
return temp;
|
|
}
|
|
|
|
/**
|
|
* thermtrip_program() - Configures the hardware to shut down the
|
|
* system if a given sensor group reaches a given temperature
|
|
* @dev: ptr to the struct device for the SOC_THERM IP block
|
|
* @sg: pointer to the sensor group to set the thermtrip temperature for
|
|
* @trip_temp: the temperature in millicelsius to trigger the thermal trip at
|
|
*
|
|
* Sets the thermal trip threshold of the given sensor group to be the
|
|
* @trip_temp. If this threshold is crossed, the hardware will shut
|
|
* down.
|
|
*
|
|
* Note that, although @trip_temp is specified in millicelsius, the
|
|
* hardware is programmed in degrees Celsius.
|
|
*
|
|
* Return: 0 upon success, or %-EINVAL upon failure.
|
|
*/
|
|
static int thermtrip_program(struct device *dev,
|
|
const struct tegra_tsensor_group *sg,
|
|
int trip_temp)
|
|
{
|
|
struct tegra_soctherm *ts = dev_get_drvdata(dev);
|
|
int temp;
|
|
u32 r;
|
|
|
|
if (!sg || !sg->thermtrip_threshold_mask)
|
|
return -EINVAL;
|
|
|
|
temp = enforce_temp_range(dev, trip_temp) / ts->soc->thresh_grain;
|
|
|
|
r = readl(ts->regs + THERMCTL_THERMTRIP_CTL);
|
|
r = REG_SET_MASK(r, sg->thermtrip_threshold_mask, temp);
|
|
r = REG_SET_MASK(r, sg->thermtrip_enable_mask, 1);
|
|
r = REG_SET_MASK(r, sg->thermtrip_any_en_mask, 0);
|
|
writel(r, ts->regs + THERMCTL_THERMTRIP_CTL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tegra_soctherm_set_hwtrips() - set HW trip point from DT data
|
|
* @dev: struct device * of the SOC_THERM instance
|
|
*
|
|
* Configure the SOC_THERM HW trip points, setting "THERMTRIP"
|
|
* trip points , using "critical" type trip_temp from thermal
|
|
* zone.
|
|
* After they have been configured, THERMTRIP will take action
|
|
* when the configured SoC thermal sensor group reaches a
|
|
* certain temperature.
|
|
*
|
|
* Return: 0 upon success, or a negative error code on failure.
|
|
* "Success" does not mean that trips was enabled; it could also
|
|
* mean that no node was found in DT.
|
|
* THERMTRIP has been enabled successfully when a message similar to
|
|
* this one appears on the serial console:
|
|
* "thermtrip: will shut down when sensor group XXX reaches YYYYYY mC"
|
|
*/
|
|
static int tegra_soctherm_set_hwtrips(struct device *dev,
|
|
const struct tegra_tsensor_group *sg,
|
|
struct thermal_zone_device *tz)
|
|
{
|
|
int temperature;
|
|
int ret;
|
|
|
|
ret = tz->ops->get_crit_temp(tz, &temperature);
|
|
if (ret) {
|
|
dev_warn(dev, "thermtrip: %s: missing critical temperature\n",
|
|
sg->name);
|
|
return ret;
|
|
}
|
|
|
|
ret = thermtrip_program(dev, sg, temperature);
|
|
if (ret) {
|
|
dev_err(dev, "thermtrip: %s: error during enable\n",
|
|
sg->name);
|
|
return ret;
|
|
}
|
|
|
|
dev_info(dev,
|
|
"thermtrip: will shut down when %s reaches %d mC\n",
|
|
sg->name, temperature);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static int regs_show(struct seq_file *s, void *data)
|
|
{
|
|
struct platform_device *pdev = s->private;
|
|
struct tegra_soctherm *ts = platform_get_drvdata(pdev);
|
|
const struct tegra_tsensor *tsensors = ts->soc->tsensors;
|
|
const struct tegra_tsensor_group **ttgs = ts->soc->ttgs;
|
|
u32 r, state;
|
|
int i;
|
|
|
|
seq_puts(s, "-----TSENSE (convert HW)-----\n");
|
|
|
|
for (i = 0; i < ts->soc->num_tsensors; i++) {
|
|
r = readl(ts->regs + tsensors[i].base + SENSOR_CONFIG1);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG1_TEMP_ENABLE);
|
|
|
|
seq_printf(s, "%s: ", tsensors[i].name);
|
|
seq_printf(s, "En(%d) ", state);
|
|
|
|
if (!state) {
|
|
seq_puts(s, "\n");
|
|
continue;
|
|
}
|
|
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG1_TIDDQ_EN_MASK);
|
|
seq_printf(s, "tiddq(%d) ", state);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG1_TEN_COUNT_MASK);
|
|
seq_printf(s, "ten_count(%d) ", state);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG1_TSAMPLE_MASK);
|
|
seq_printf(s, "tsample(%d) ", state + 1);
|
|
|
|
r = readl(ts->regs + tsensors[i].base + SENSOR_STATUS1);
|
|
state = REG_GET_MASK(r, SENSOR_STATUS1_TEMP_VALID_MASK);
|
|
seq_printf(s, "Temp(%d/", state);
|
|
state = REG_GET_MASK(r, SENSOR_STATUS1_TEMP_MASK);
|
|
seq_printf(s, "%d) ", translate_temp(state));
|
|
|
|
r = readl(ts->regs + tsensors[i].base + SENSOR_STATUS0);
|
|
state = REG_GET_MASK(r, SENSOR_STATUS0_VALID_MASK);
|
|
seq_printf(s, "Capture(%d/", state);
|
|
state = REG_GET_MASK(r, SENSOR_STATUS0_CAPTURE_MASK);
|
|
seq_printf(s, "%d) ", state);
|
|
|
|
r = readl(ts->regs + tsensors[i].base + SENSOR_CONFIG0);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG0_STOP);
|
|
seq_printf(s, "Stop(%d) ", state);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG0_TALL_MASK);
|
|
seq_printf(s, "Tall(%d) ", state);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG0_TCALC_OVER);
|
|
seq_printf(s, "Over(%d/", state);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG0_OVER);
|
|
seq_printf(s, "%d/", state);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG0_CPTR_OVER);
|
|
seq_printf(s, "%d) ", state);
|
|
|
|
r = readl(ts->regs + tsensors[i].base + SENSOR_CONFIG2);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG2_THERMA_MASK);
|
|
seq_printf(s, "Therm_A/B(%d/", state);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG2_THERMB_MASK);
|
|
seq_printf(s, "%d)\n", (s16)state);
|
|
}
|
|
|
|
r = readl(ts->regs + SENSOR_PDIV);
|
|
seq_printf(s, "PDIV: 0x%x\n", r);
|
|
|
|
r = readl(ts->regs + SENSOR_HOTSPOT_OFF);
|
|
seq_printf(s, "HOTSPOT: 0x%x\n", r);
|
|
|
|
seq_puts(s, "\n");
|
|
seq_puts(s, "-----SOC_THERM-----\n");
|
|
|
|
r = readl(ts->regs + SENSOR_TEMP1);
|
|
state = REG_GET_MASK(r, SENSOR_TEMP1_CPU_TEMP_MASK);
|
|
seq_printf(s, "Temperatures: CPU(%d) ", translate_temp(state));
|
|
state = REG_GET_MASK(r, SENSOR_TEMP1_GPU_TEMP_MASK);
|
|
seq_printf(s, " GPU(%d) ", translate_temp(state));
|
|
r = readl(ts->regs + SENSOR_TEMP2);
|
|
state = REG_GET_MASK(r, SENSOR_TEMP2_PLLX_TEMP_MASK);
|
|
seq_printf(s, " PLLX(%d) ", translate_temp(state));
|
|
state = REG_GET_MASK(r, SENSOR_TEMP2_MEM_TEMP_MASK);
|
|
seq_printf(s, " MEM(%d)\n", translate_temp(state));
|
|
|
|
r = readl(ts->regs + THERMCTL_THERMTRIP_CTL);
|
|
state = REG_GET_MASK(r, ttgs[0]->thermtrip_any_en_mask);
|
|
seq_printf(s, "Thermtrip Any En(%d)\n", state);
|
|
for (i = 0; i < ts->soc->num_ttgs; i++) {
|
|
state = REG_GET_MASK(r, ttgs[i]->thermtrip_enable_mask);
|
|
seq_printf(s, " %s En(%d) ", ttgs[i]->name, state);
|
|
state = REG_GET_MASK(r, ttgs[i]->thermtrip_threshold_mask);
|
|
state *= ts->soc->thresh_grain;
|
|
seq_printf(s, "Thresh(%d)\n", state);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int regs_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, regs_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations regs_fops = {
|
|
.open = regs_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static void soctherm_debug_init(struct platform_device *pdev)
|
|
{
|
|
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
|
|
struct dentry *root, *file;
|
|
|
|
root = debugfs_create_dir("soctherm", NULL);
|
|
if (!root) {
|
|
dev_err(&pdev->dev, "failed to create debugfs directory\n");
|
|
return;
|
|
}
|
|
|
|
tegra->debugfs_dir = root;
|
|
|
|
file = debugfs_create_file("reg_contents", 0644, root,
|
|
pdev, ®s_fops);
|
|
if (!file) {
|
|
dev_err(&pdev->dev, "failed to create debugfs file\n");
|
|
debugfs_remove_recursive(tegra->debugfs_dir);
|
|
tegra->debugfs_dir = NULL;
|
|
}
|
|
}
|
|
#else
|
|
static inline void soctherm_debug_init(struct platform_device *pdev) {}
|
|
#endif
|
|
|
|
static int soctherm_clk_enable(struct platform_device *pdev, bool enable)
|
|
{
|
|
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
|
|
int err;
|
|
|
|
if (!tegra->clock_soctherm || !tegra->clock_tsensor)
|
|
return -EINVAL;
|
|
|
|
reset_control_assert(tegra->reset);
|
|
|
|
if (enable) {
|
|
err = clk_prepare_enable(tegra->clock_soctherm);
|
|
if (err) {
|
|
reset_control_deassert(tegra->reset);
|
|
return err;
|
|
}
|
|
|
|
err = clk_prepare_enable(tegra->clock_tsensor);
|
|
if (err) {
|
|
clk_disable_unprepare(tegra->clock_soctherm);
|
|
reset_control_deassert(tegra->reset);
|
|
return err;
|
|
}
|
|
} else {
|
|
clk_disable_unprepare(tegra->clock_tsensor);
|
|
clk_disable_unprepare(tegra->clock_soctherm);
|
|
}
|
|
|
|
reset_control_deassert(tegra->reset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void soctherm_init(struct platform_device *pdev)
|
|
{
|
|
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
|
|
const struct tegra_tsensor_group **ttgs = tegra->soc->ttgs;
|
|
int i;
|
|
u32 pdiv, hotspot;
|
|
|
|
/* Initialize raw sensors */
|
|
for (i = 0; i < tegra->soc->num_tsensors; ++i)
|
|
enable_tsensor(tegra, i);
|
|
|
|
/* program pdiv and hotspot offsets per THERM */
|
|
pdiv = readl(tegra->regs + SENSOR_PDIV);
|
|
hotspot = readl(tegra->regs + SENSOR_HOTSPOT_OFF);
|
|
for (i = 0; i < tegra->soc->num_ttgs; ++i) {
|
|
pdiv = REG_SET_MASK(pdiv, ttgs[i]->pdiv_mask,
|
|
ttgs[i]->pdiv);
|
|
/* hotspot offset from PLLX, doesn't need to configure PLLX */
|
|
if (ttgs[i]->id == TEGRA124_SOCTHERM_SENSOR_PLLX)
|
|
continue;
|
|
hotspot = REG_SET_MASK(hotspot,
|
|
ttgs[i]->pllx_hotspot_mask,
|
|
ttgs[i]->pllx_hotspot_diff);
|
|
}
|
|
writel(pdiv, tegra->regs + SENSOR_PDIV);
|
|
writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF);
|
|
}
|
|
|
|
static const struct of_device_id tegra_soctherm_of_match[] = {
|
|
#ifdef CONFIG_ARCH_TEGRA_124_SOC
|
|
{
|
|
.compatible = "nvidia,tegra124-soctherm",
|
|
.data = &tegra124_soctherm,
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_ARCH_TEGRA_132_SOC
|
|
{
|
|
.compatible = "nvidia,tegra132-soctherm",
|
|
.data = &tegra132_soctherm,
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_ARCH_TEGRA_210_SOC
|
|
{
|
|
.compatible = "nvidia,tegra210-soctherm",
|
|
.data = &tegra210_soctherm,
|
|
},
|
|
#endif
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tegra_soctherm_of_match);
|
|
|
|
static int tegra_soctherm_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *match;
|
|
struct tegra_soctherm *tegra;
|
|
struct thermal_zone_device *z;
|
|
struct tsensor_shared_calib shared_calib;
|
|
struct resource *res;
|
|
struct tegra_soctherm_soc *soc;
|
|
unsigned int i;
|
|
int err;
|
|
|
|
match = of_match_node(tegra_soctherm_of_match, pdev->dev.of_node);
|
|
if (!match)
|
|
return -ENODEV;
|
|
|
|
soc = (struct tegra_soctherm_soc *)match->data;
|
|
if (soc->num_ttgs > TEGRA124_SOCTHERM_SENSOR_NUM)
|
|
return -EINVAL;
|
|
|
|
tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
|
|
if (!tegra)
|
|
return -ENOMEM;
|
|
|
|
dev_set_drvdata(&pdev->dev, tegra);
|
|
|
|
tegra->soc = soc;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
tegra->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(tegra->regs))
|
|
return PTR_ERR(tegra->regs);
|
|
|
|
tegra->reset = devm_reset_control_get(&pdev->dev, "soctherm");
|
|
if (IS_ERR(tegra->reset)) {
|
|
dev_err(&pdev->dev, "can't get soctherm reset\n");
|
|
return PTR_ERR(tegra->reset);
|
|
}
|
|
|
|
tegra->clock_tsensor = devm_clk_get(&pdev->dev, "tsensor");
|
|
if (IS_ERR(tegra->clock_tsensor)) {
|
|
dev_err(&pdev->dev, "can't get tsensor clock\n");
|
|
return PTR_ERR(tegra->clock_tsensor);
|
|
}
|
|
|
|
tegra->clock_soctherm = devm_clk_get(&pdev->dev, "soctherm");
|
|
if (IS_ERR(tegra->clock_soctherm)) {
|
|
dev_err(&pdev->dev, "can't get soctherm clock\n");
|
|
return PTR_ERR(tegra->clock_soctherm);
|
|
}
|
|
|
|
tegra->calib = devm_kzalloc(&pdev->dev,
|
|
sizeof(u32) * soc->num_tsensors,
|
|
GFP_KERNEL);
|
|
if (!tegra->calib)
|
|
return -ENOMEM;
|
|
|
|
/* calculate shared calibration data */
|
|
err = tegra_calc_shared_calib(soc->tfuse, &shared_calib);
|
|
if (err)
|
|
return err;
|
|
|
|
/* calculate tsensor calibaration data */
|
|
for (i = 0; i < soc->num_tsensors; ++i) {
|
|
err = tegra_calc_tsensor_calib(&soc->tsensors[i],
|
|
&shared_calib,
|
|
&tegra->calib[i]);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
tegra->thermctl_tzs = devm_kzalloc(&pdev->dev,
|
|
sizeof(*z) * soc->num_ttgs,
|
|
GFP_KERNEL);
|
|
if (!tegra->thermctl_tzs)
|
|
return -ENOMEM;
|
|
|
|
err = soctherm_clk_enable(pdev, true);
|
|
if (err)
|
|
return err;
|
|
|
|
soctherm_init(pdev);
|
|
|
|
for (i = 0; i < soc->num_ttgs; ++i) {
|
|
struct tegra_thermctl_zone *zone =
|
|
devm_kzalloc(&pdev->dev, sizeof(*zone), GFP_KERNEL);
|
|
if (!zone) {
|
|
err = -ENOMEM;
|
|
goto disable_clocks;
|
|
}
|
|
|
|
zone->reg = tegra->regs + soc->ttgs[i]->sensor_temp_offset;
|
|
zone->dev = &pdev->dev;
|
|
zone->sg = soc->ttgs[i];
|
|
|
|
z = devm_thermal_zone_of_sensor_register(&pdev->dev,
|
|
soc->ttgs[i]->id, zone,
|
|
&tegra_of_thermal_ops);
|
|
if (IS_ERR(z)) {
|
|
err = PTR_ERR(z);
|
|
dev_err(&pdev->dev, "failed to register sensor: %d\n",
|
|
err);
|
|
goto disable_clocks;
|
|
}
|
|
|
|
zone->tz = z;
|
|
tegra->thermctl_tzs[soc->ttgs[i]->id] = z;
|
|
|
|
/* Configure hw trip points */
|
|
tegra_soctherm_set_hwtrips(&pdev->dev, soc->ttgs[i], z);
|
|
}
|
|
|
|
soctherm_debug_init(pdev);
|
|
|
|
return 0;
|
|
|
|
disable_clocks:
|
|
soctherm_clk_enable(pdev, false);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int tegra_soctherm_remove(struct platform_device *pdev)
|
|
{
|
|
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
|
|
|
|
debugfs_remove_recursive(tegra->debugfs_dir);
|
|
|
|
soctherm_clk_enable(pdev, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused soctherm_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
|
|
soctherm_clk_enable(pdev, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused soctherm_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
|
|
struct tegra_soctherm_soc *soc = tegra->soc;
|
|
int err, i;
|
|
|
|
err = soctherm_clk_enable(pdev, true);
|
|
if (err) {
|
|
dev_err(&pdev->dev,
|
|
"Resume failed: enable clocks failed\n");
|
|
return err;
|
|
}
|
|
|
|
soctherm_init(pdev);
|
|
|
|
for (i = 0; i < soc->num_ttgs; ++i) {
|
|
struct thermal_zone_device *tz;
|
|
|
|
tz = tegra->thermctl_tzs[soc->ttgs[i]->id];
|
|
tegra_soctherm_set_hwtrips(dev, soc->ttgs[i], tz);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(tegra_soctherm_pm, soctherm_suspend, soctherm_resume);
|
|
|
|
static struct platform_driver tegra_soctherm_driver = {
|
|
.probe = tegra_soctherm_probe,
|
|
.remove = tegra_soctherm_remove,
|
|
.driver = {
|
|
.name = "tegra_soctherm",
|
|
.pm = &tegra_soctherm_pm,
|
|
.of_match_table = tegra_soctherm_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(tegra_soctherm_driver);
|
|
|
|
MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
|
|
MODULE_DESCRIPTION("NVIDIA Tegra SOCTHERM thermal management driver");
|
|
MODULE_LICENSE("GPL v2");
|