mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-01 03:46:38 +07:00
e7392364fc
Process iwlegacy source files using: indent -npro -l500 -nhnl indent -npro -kr -i8 -ts8 -sob -l80 -nbbo -ss -ncs -cp1 -il0 -psl Plus manual compilation fixes. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
523 lines
22 KiB
C
523 lines
22 KiB
C
/******************************************************************************
|
|
*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
|
|
* USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution
|
|
* in the file called LICENSE.GPL.
|
|
*
|
|
* Contact Information:
|
|
* Intel Linux Wireless <ilw@linux.intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*****************************************************************************/
|
|
|
|
#ifndef __il_prph_h__
|
|
#define __il_prph_h__
|
|
|
|
/*
|
|
* Registers in this file are internal, not PCI bus memory mapped.
|
|
* Driver accesses these via HBUS_TARG_PRPH_* registers.
|
|
*/
|
|
#define PRPH_BASE (0x00000)
|
|
#define PRPH_END (0xFFFFF)
|
|
|
|
/* APMG (power management) constants */
|
|
#define APMG_BASE (PRPH_BASE + 0x3000)
|
|
#define APMG_CLK_CTRL_REG (APMG_BASE + 0x0000)
|
|
#define APMG_CLK_EN_REG (APMG_BASE + 0x0004)
|
|
#define APMG_CLK_DIS_REG (APMG_BASE + 0x0008)
|
|
#define APMG_PS_CTRL_REG (APMG_BASE + 0x000c)
|
|
#define APMG_PCIDEV_STT_REG (APMG_BASE + 0x0010)
|
|
#define APMG_RFKILL_REG (APMG_BASE + 0x0014)
|
|
#define APMG_RTC_INT_STT_REG (APMG_BASE + 0x001c)
|
|
#define APMG_RTC_INT_MSK_REG (APMG_BASE + 0x0020)
|
|
#define APMG_DIGITAL_SVR_REG (APMG_BASE + 0x0058)
|
|
#define APMG_ANALOG_SVR_REG (APMG_BASE + 0x006C)
|
|
|
|
#define APMS_CLK_VAL_MRB_FUNC_MODE (0x00000001)
|
|
#define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200)
|
|
#define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800)
|
|
|
|
#define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS (0x00400000)
|
|
#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000)
|
|
#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000)
|
|
#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000)
|
|
#define APMG_PS_CTRL_VAL_PWR_SRC_MAX (0x01000000) /* 3945 only */
|
|
#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000)
|
|
#define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */
|
|
#define APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060)
|
|
|
|
#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800)
|
|
|
|
/**
|
|
* BSM (Bootstrap State Machine)
|
|
*
|
|
* The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
|
|
* in special SRAM that does not power down when the embedded control
|
|
* processor is sleeping (e.g. for periodic power-saving shutdowns of radio).
|
|
*
|
|
* When powering back up after sleeps (or during initial uCode load), the BSM
|
|
* internally loads the short bootstrap program from the special SRAM into the
|
|
* embedded processor's instruction SRAM, and starts the processor so it runs
|
|
* the bootstrap program.
|
|
*
|
|
* This bootstrap program loads (via PCI busmaster DMA) instructions and data
|
|
* images for a uCode program from host DRAM locations. The host driver
|
|
* indicates DRAM locations and sizes for instruction and data images via the
|
|
* four BSM_DRAM_* registers. Once the bootstrap program loads the new program,
|
|
* the new program starts automatically.
|
|
*
|
|
* The uCode used for open-source drivers includes two programs:
|
|
*
|
|
* 1) Initialization -- performs hardware calibration and sets up some
|
|
* internal data, then notifies host via "initialize alive" notification
|
|
* (struct il_init_alive_resp) that it has completed all of its work.
|
|
* After signal from host, it then loads and starts the runtime program.
|
|
* The initialization program must be used when initially setting up the
|
|
* NIC after loading the driver.
|
|
*
|
|
* 2) Runtime/Protocol -- performs all normal runtime operations. This
|
|
* notifies host via "alive" notification (struct il_alive_resp) that it
|
|
* is ready to be used.
|
|
*
|
|
* When initializing the NIC, the host driver does the following procedure:
|
|
*
|
|
* 1) Load bootstrap program (instructions only, no data image for bootstrap)
|
|
* into bootstrap memory. Use dword writes starting at BSM_SRAM_LOWER_BOUND
|
|
*
|
|
* 2) Point (via BSM_DRAM_*) to the "initialize" uCode data and instruction
|
|
* images in host DRAM.
|
|
*
|
|
* 3) Set up BSM to copy from BSM SRAM into uCode instruction SRAM when asked:
|
|
* BSM_WR_MEM_SRC_REG = 0
|
|
* BSM_WR_MEM_DST_REG = RTC_INST_LOWER_BOUND
|
|
* BSM_WR_MEM_DWCOUNT_REG = # dwords in bootstrap instruction image
|
|
*
|
|
* 4) Load bootstrap into instruction SRAM:
|
|
* BSM_WR_CTRL_REG = BSM_WR_CTRL_REG_BIT_START
|
|
*
|
|
* 5) Wait for load completion:
|
|
* Poll BSM_WR_CTRL_REG for BSM_WR_CTRL_REG_BIT_START = 0
|
|
*
|
|
* 6) Enable future boot loads whenever NIC's power management triggers it:
|
|
* BSM_WR_CTRL_REG = BSM_WR_CTRL_REG_BIT_START_EN
|
|
*
|
|
* 7) Start the NIC by removing all reset bits:
|
|
* CSR_RESET = 0
|
|
*
|
|
* The bootstrap uCode (already in instruction SRAM) loads initialization
|
|
* uCode. Initialization uCode performs data initialization, sends
|
|
* "initialize alive" notification to host, and waits for a signal from
|
|
* host to load runtime code.
|
|
*
|
|
* 4) Point (via BSM_DRAM_*) to the "runtime" uCode data and instruction
|
|
* images in host DRAM. The last register loaded must be the instruction
|
|
* byte count register ("1" in MSbit tells initialization uCode to load
|
|
* the runtime uCode):
|
|
* BSM_DRAM_INST_BYTECOUNT_REG = byte count | BSM_DRAM_INST_LOAD
|
|
*
|
|
* 5) Wait for "alive" notification, then issue normal runtime commands.
|
|
*
|
|
* Data caching during power-downs:
|
|
*
|
|
* Just before the embedded controller powers down (e.g for automatic
|
|
* power-saving modes, or for RFKILL), uCode stores (via PCI busmaster DMA)
|
|
* a current snapshot of the embedded processor's data SRAM into host DRAM.
|
|
* This caches the data while the embedded processor's memory is powered down.
|
|
* Location and size are controlled by BSM_DRAM_DATA_* registers.
|
|
*
|
|
* NOTE: Instruction SRAM does not need to be saved, since that doesn't
|
|
* change during operation; the original image (from uCode distribution
|
|
* file) can be used for reload.
|
|
*
|
|
* When powering back up, the BSM loads the bootstrap program. Bootstrap looks
|
|
* at the BSM_DRAM_* registers, which now point to the runtime instruction
|
|
* image and the cached (modified) runtime data (*not* the initialization
|
|
* uCode). Bootstrap reloads these runtime images into SRAM, and restarts the
|
|
* uCode from where it left off before the power-down.
|
|
*
|
|
* NOTE: Initialization uCode does *not* run as part of the save/restore
|
|
* procedure.
|
|
*
|
|
* This save/restore method is mostly for autonomous power management during
|
|
* normal operation (result of C_POWER_TBL). Platform suspend/resume and
|
|
* RFKILL should use complete restarts (with total re-initialization) of uCode,
|
|
* allowing total shutdown (including BSM memory).
|
|
*
|
|
* Note that, during normal operation, the host DRAM that held the initial
|
|
* startup data for the runtime code is now being used as a backup data cache
|
|
* for modified data! If you need to completely re-initialize the NIC, make
|
|
* sure that you use the runtime data image from the uCode distribution file,
|
|
* not the modified/saved runtime data. You may want to store a separate
|
|
* "clean" runtime data image in DRAM to avoid disk reads of distribution file.
|
|
*/
|
|
|
|
/* BSM bit fields */
|
|
#define BSM_WR_CTRL_REG_BIT_START (0x80000000) /* start boot load now */
|
|
#define BSM_WR_CTRL_REG_BIT_START_EN (0x40000000) /* enable boot after pwrup */
|
|
#define BSM_DRAM_INST_LOAD (0x80000000) /* start program load now */
|
|
|
|
/* BSM addresses */
|
|
#define BSM_BASE (PRPH_BASE + 0x3400)
|
|
#define BSM_END (PRPH_BASE + 0x3800)
|
|
|
|
#define BSM_WR_CTRL_REG (BSM_BASE + 0x000) /* ctl and status */
|
|
#define BSM_WR_MEM_SRC_REG (BSM_BASE + 0x004) /* source in BSM mem */
|
|
#define BSM_WR_MEM_DST_REG (BSM_BASE + 0x008) /* dest in SRAM mem */
|
|
#define BSM_WR_DWCOUNT_REG (BSM_BASE + 0x00C) /* bytes */
|
|
#define BSM_WR_STATUS_REG (BSM_BASE + 0x010) /* bit 0: 1 == done */
|
|
|
|
/*
|
|
* Pointers and size regs for bootstrap load and data SRAM save/restore.
|
|
* NOTE: 3945 pointers use bits 31:0 of DRAM address.
|
|
* 4965 pointers use bits 35:4 of DRAM address.
|
|
*/
|
|
#define BSM_DRAM_INST_PTR_REG (BSM_BASE + 0x090)
|
|
#define BSM_DRAM_INST_BYTECOUNT_REG (BSM_BASE + 0x094)
|
|
#define BSM_DRAM_DATA_PTR_REG (BSM_BASE + 0x098)
|
|
#define BSM_DRAM_DATA_BYTECOUNT_REG (BSM_BASE + 0x09C)
|
|
|
|
/*
|
|
* BSM special memory, stays powered on during power-save sleeps.
|
|
* Read/write, address range from LOWER_BOUND to (LOWER_BOUND + SIZE -1)
|
|
*/
|
|
#define BSM_SRAM_LOWER_BOUND (PRPH_BASE + 0x3800)
|
|
#define BSM_SRAM_SIZE (1024) /* bytes */
|
|
|
|
/* 3945 Tx scheduler registers */
|
|
#define ALM_SCD_BASE (PRPH_BASE + 0x2E00)
|
|
#define ALM_SCD_MODE_REG (ALM_SCD_BASE + 0x000)
|
|
#define ALM_SCD_ARASTAT_REG (ALM_SCD_BASE + 0x004)
|
|
#define ALM_SCD_TXFACT_REG (ALM_SCD_BASE + 0x010)
|
|
#define ALM_SCD_TXF4MF_REG (ALM_SCD_BASE + 0x014)
|
|
#define ALM_SCD_TXF5MF_REG (ALM_SCD_BASE + 0x020)
|
|
#define ALM_SCD_SBYP_MODE_1_REG (ALM_SCD_BASE + 0x02C)
|
|
#define ALM_SCD_SBYP_MODE_2_REG (ALM_SCD_BASE + 0x030)
|
|
|
|
/**
|
|
* Tx Scheduler
|
|
*
|
|
* The Tx Scheduler selects the next frame to be transmitted, choosing TFDs
|
|
* (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in
|
|
* host DRAM. It steers each frame's Tx command (which contains the frame
|
|
* data) into one of up to 7 prioritized Tx DMA FIFO channels within the
|
|
* device. A queue maps to only one (selectable by driver) Tx DMA channel,
|
|
* but one DMA channel may take input from several queues.
|
|
*
|
|
* Tx DMA FIFOs have dedicated purposes. For 4965, they are used as follows
|
|
* (cf. default_queue_to_tx_fifo in 4965.c):
|
|
*
|
|
* 0 -- EDCA BK (background) frames, lowest priority
|
|
* 1 -- EDCA BE (best effort) frames, normal priority
|
|
* 2 -- EDCA VI (video) frames, higher priority
|
|
* 3 -- EDCA VO (voice) and management frames, highest priority
|
|
* 4 -- Commands (e.g. RXON, etc.)
|
|
* 5 -- unused (HCCA)
|
|
* 6 -- unused (HCCA)
|
|
* 7 -- not used by driver (device-internal only)
|
|
*
|
|
*
|
|
* Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6.
|
|
* In addition, driver can map the remaining queues to Tx DMA/FIFO
|
|
* channels 0-3 to support 11n aggregation via EDCA DMA channels.
|
|
*
|
|
* The driver sets up each queue to work in one of two modes:
|
|
*
|
|
* 1) Scheduler-Ack, in which the scheduler automatically supports a
|
|
* block-ack (BA) win of up to 64 TFDs. In this mode, each queue
|
|
* contains TFDs for a unique combination of Recipient Address (RA)
|
|
* and Traffic Identifier (TID), that is, traffic of a given
|
|
* Quality-Of-Service (QOS) priority, destined for a single station.
|
|
*
|
|
* In scheduler-ack mode, the scheduler keeps track of the Tx status of
|
|
* each frame within the BA win, including whether it's been transmitted,
|
|
* and whether it's been acknowledged by the receiving station. The device
|
|
* automatically processes block-acks received from the receiving STA,
|
|
* and reschedules un-acked frames to be retransmitted (successful
|
|
* Tx completion may end up being out-of-order).
|
|
*
|
|
* The driver must maintain the queue's Byte Count table in host DRAM
|
|
* (struct il4965_sched_queue_byte_cnt_tbl) for this mode.
|
|
* This mode does not support fragmentation.
|
|
*
|
|
* 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order.
|
|
* The device may automatically retry Tx, but will retry only one frame
|
|
* at a time, until receiving ACK from receiving station, or reaching
|
|
* retry limit and giving up.
|
|
*
|
|
* The command queue (#4/#9) must use this mode!
|
|
* This mode does not require use of the Byte Count table in host DRAM.
|
|
*
|
|
* Driver controls scheduler operation via 3 means:
|
|
* 1) Scheduler registers
|
|
* 2) Shared scheduler data base in internal 4956 SRAM
|
|
* 3) Shared data in host DRAM
|
|
*
|
|
* Initialization:
|
|
*
|
|
* When loading, driver should allocate memory for:
|
|
* 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs.
|
|
* 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory
|
|
* (1024 bytes for each queue).
|
|
*
|
|
* After receiving "Alive" response from uCode, driver must initialize
|
|
* the scheduler (especially for queue #4/#9, the command queue, otherwise
|
|
* the driver can't issue commands!):
|
|
*/
|
|
|
|
/**
|
|
* Max Tx win size is the max number of contiguous TFDs that the scheduler
|
|
* can keep track of at one time when creating block-ack chains of frames.
|
|
* Note that "64" matches the number of ack bits in a block-ack packet.
|
|
* Driver should use SCD_WIN_SIZE and SCD_FRAME_LIMIT values to initialize
|
|
* IL49_SCD_CONTEXT_QUEUE_OFFSET(x) values.
|
|
*/
|
|
#define SCD_WIN_SIZE 64
|
|
#define SCD_FRAME_LIMIT 64
|
|
|
|
/* SCD registers are internal, must be accessed via HBUS_TARG_PRPH regs */
|
|
#define IL49_SCD_START_OFFSET 0xa02c00
|
|
|
|
/*
|
|
* 4965 tells driver SRAM address for internal scheduler structs via this reg.
|
|
* Value is valid only after "Alive" response from uCode.
|
|
*/
|
|
#define IL49_SCD_SRAM_BASE_ADDR (IL49_SCD_START_OFFSET + 0x0)
|
|
|
|
/*
|
|
* Driver may need to update queue-empty bits after changing queue's
|
|
* write and read pointers (idxes) during (re-)initialization (i.e. when
|
|
* scheduler is not tracking what's happening).
|
|
* Bit fields:
|
|
* 31-16: Write mask -- 1: update empty bit, 0: don't change empty bit
|
|
* 15-00: Empty state, one for each queue -- 1: empty, 0: non-empty
|
|
* NOTE: This register is not used by Linux driver.
|
|
*/
|
|
#define IL49_SCD_EMPTY_BITS (IL49_SCD_START_OFFSET + 0x4)
|
|
|
|
/*
|
|
* Physical base address of array of byte count (BC) circular buffers (CBs).
|
|
* Each Tx queue has a BC CB in host DRAM to support Scheduler-ACK mode.
|
|
* This register points to BC CB for queue 0, must be on 1024-byte boundary.
|
|
* Others are spaced by 1024 bytes.
|
|
* Each BC CB is 2 bytes * (256 + 64) = 740 bytes, followed by 384 bytes pad.
|
|
* (Index into a queue's BC CB) = (idx into queue's TFD CB) = (SSN & 0xff).
|
|
* Bit fields:
|
|
* 25-00: Byte Count CB physical address [35:10], must be 1024-byte aligned.
|
|
*/
|
|
#define IL49_SCD_DRAM_BASE_ADDR (IL49_SCD_START_OFFSET + 0x10)
|
|
|
|
/*
|
|
* Enables any/all Tx DMA/FIFO channels.
|
|
* Scheduler generates requests for only the active channels.
|
|
* Set this to 0xff to enable all 8 channels (normal usage).
|
|
* Bit fields:
|
|
* 7- 0: Enable (1), disable (0), one bit for each channel 0-7
|
|
*/
|
|
#define IL49_SCD_TXFACT (IL49_SCD_START_OFFSET + 0x1c)
|
|
/*
|
|
* Queue (x) Write Pointers (idxes, really!), one for each Tx queue.
|
|
* Initialized and updated by driver as new TFDs are added to queue.
|
|
* NOTE: If using Block Ack, idx must correspond to frame's
|
|
* Start Sequence Number; idx = (SSN & 0xff)
|
|
* NOTE: Alternative to HBUS_TARG_WRPTR, which is what Linux driver uses?
|
|
*/
|
|
#define IL49_SCD_QUEUE_WRPTR(x) (IL49_SCD_START_OFFSET + 0x24 + (x) * 4)
|
|
|
|
/*
|
|
* Queue (x) Read Pointers (idxes, really!), one for each Tx queue.
|
|
* For FIFO mode, idx indicates next frame to transmit.
|
|
* For Scheduler-ACK mode, idx indicates first frame in Tx win.
|
|
* Initialized by driver, updated by scheduler.
|
|
*/
|
|
#define IL49_SCD_QUEUE_RDPTR(x) (IL49_SCD_START_OFFSET + 0x64 + (x) * 4)
|
|
|
|
/*
|
|
* Select which queues work in chain mode (1) vs. not (0).
|
|
* Use chain mode to build chains of aggregated frames.
|
|
* Bit fields:
|
|
* 31-16: Reserved
|
|
* 15-00: Mode, one bit for each queue -- 1: Chain mode, 0: one-at-a-time
|
|
* NOTE: If driver sets up queue for chain mode, it should be also set up
|
|
* Scheduler-ACK mode as well, via SCD_QUEUE_STATUS_BITS(x).
|
|
*/
|
|
#define IL49_SCD_QUEUECHAIN_SEL (IL49_SCD_START_OFFSET + 0xd0)
|
|
|
|
/*
|
|
* Select which queues interrupt driver when scheduler increments
|
|
* a queue's read pointer (idx).
|
|
* Bit fields:
|
|
* 31-16: Reserved
|
|
* 15-00: Interrupt enable, one bit for each queue -- 1: enabled, 0: disabled
|
|
* NOTE: This functionality is apparently a no-op; driver relies on interrupts
|
|
* from Rx queue to read Tx command responses and update Tx queues.
|
|
*/
|
|
#define IL49_SCD_INTERRUPT_MASK (IL49_SCD_START_OFFSET + 0xe4)
|
|
|
|
/*
|
|
* Queue search status registers. One for each queue.
|
|
* Sets up queue mode and assigns queue to Tx DMA channel.
|
|
* Bit fields:
|
|
* 19-10: Write mask/enable bits for bits 0-9
|
|
* 9: Driver should init to "0"
|
|
* 8: Scheduler-ACK mode (1), non-Scheduler-ACK (i.e. FIFO) mode (0).
|
|
* Driver should init to "1" for aggregation mode, or "0" otherwise.
|
|
* 7-6: Driver should init to "0"
|
|
* 5: Window Size Left; indicates whether scheduler can request
|
|
* another TFD, based on win size, etc. Driver should init
|
|
* this bit to "1" for aggregation mode, or "0" for non-agg.
|
|
* 4-1: Tx FIFO to use (range 0-7).
|
|
* 0: Queue is active (1), not active (0).
|
|
* Other bits should be written as "0"
|
|
*
|
|
* NOTE: If enabling Scheduler-ACK mode, chain mode should also be enabled
|
|
* via SCD_QUEUECHAIN_SEL.
|
|
*/
|
|
#define IL49_SCD_QUEUE_STATUS_BITS(x)\
|
|
(IL49_SCD_START_OFFSET + 0x104 + (x) * 4)
|
|
|
|
/* Bit field positions */
|
|
#define IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE (0)
|
|
#define IL49_SCD_QUEUE_STTS_REG_POS_TXF (1)
|
|
#define IL49_SCD_QUEUE_STTS_REG_POS_WSL (5)
|
|
#define IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK (8)
|
|
|
|
/* Write masks */
|
|
#define IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (10)
|
|
#define IL49_SCD_QUEUE_STTS_REG_MSK (0x0007FC00)
|
|
|
|
/**
|
|
* 4965 internal SRAM structures for scheduler, shared with driver ...
|
|
*
|
|
* Driver should clear and initialize the following areas after receiving
|
|
* "Alive" response from 4965 uCode, i.e. after initial
|
|
* uCode load, or after a uCode load done for error recovery:
|
|
*
|
|
* SCD_CONTEXT_DATA_OFFSET (size 128 bytes)
|
|
* SCD_TX_STTS_BITMAP_OFFSET (size 256 bytes)
|
|
* SCD_TRANSLATE_TBL_OFFSET (size 32 bytes)
|
|
*
|
|
* Driver accesses SRAM via HBUS_TARG_MEM_* registers.
|
|
* Driver reads base address of this scheduler area from SCD_SRAM_BASE_ADDR.
|
|
* All OFFSET values must be added to this base address.
|
|
*/
|
|
|
|
/*
|
|
* Queue context. One 8-byte entry for each of 16 queues.
|
|
*
|
|
* Driver should clear this entire area (size 0x80) to 0 after receiving
|
|
* "Alive" notification from uCode. Additionally, driver should init
|
|
* each queue's entry as follows:
|
|
*
|
|
* LS Dword bit fields:
|
|
* 0-06: Max Tx win size for Scheduler-ACK. Driver should init to 64.
|
|
*
|
|
* MS Dword bit fields:
|
|
* 16-22: Frame limit. Driver should init to 10 (0xa).
|
|
*
|
|
* Driver should init all other bits to 0.
|
|
*
|
|
* Init must be done after driver receives "Alive" response from 4965 uCode,
|
|
* and when setting up queue for aggregation.
|
|
*/
|
|
#define IL49_SCD_CONTEXT_DATA_OFFSET 0x380
|
|
#define IL49_SCD_CONTEXT_QUEUE_OFFSET(x) \
|
|
(IL49_SCD_CONTEXT_DATA_OFFSET + ((x) * 8))
|
|
|
|
#define IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS (0)
|
|
#define IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK (0x0000007F)
|
|
#define IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16)
|
|
#define IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000)
|
|
|
|
/*
|
|
* Tx Status Bitmap
|
|
*
|
|
* Driver should clear this entire area (size 0x100) to 0 after receiving
|
|
* "Alive" notification from uCode. Area is used only by device itself;
|
|
* no other support (besides clearing) is required from driver.
|
|
*/
|
|
#define IL49_SCD_TX_STTS_BITMAP_OFFSET 0x400
|
|
|
|
/*
|
|
* RAxTID to queue translation mapping.
|
|
*
|
|
* When queue is in Scheduler-ACK mode, frames placed in a that queue must be
|
|
* for only one combination of receiver address (RA) and traffic ID (TID), i.e.
|
|
* one QOS priority level destined for one station (for this wireless link,
|
|
* not final destination). The SCD_TRANSLATE_TBL area provides 16 16-bit
|
|
* mappings, one for each of the 16 queues. If queue is not in Scheduler-ACK
|
|
* mode, the device ignores the mapping value.
|
|
*
|
|
* Bit fields, for each 16-bit map:
|
|
* 15-9: Reserved, set to 0
|
|
* 8-4: Index into device's station table for recipient station
|
|
* 3-0: Traffic ID (tid), range 0-15
|
|
*
|
|
* Driver should clear this entire area (size 32 bytes) to 0 after receiving
|
|
* "Alive" notification from uCode. To update a 16-bit map value, driver
|
|
* must read a dword-aligned value from device SRAM, replace the 16-bit map
|
|
* value of interest, and write the dword value back into device SRAM.
|
|
*/
|
|
#define IL49_SCD_TRANSLATE_TBL_OFFSET 0x500
|
|
|
|
/* Find translation table dword to read/write for given queue */
|
|
#define IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \
|
|
((IL49_SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffffffc)
|
|
|
|
#define IL_SCD_TXFIFO_POS_TID (0)
|
|
#define IL_SCD_TXFIFO_POS_RA (4)
|
|
#define IL_SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF)
|
|
|
|
/*********************** END TX SCHEDULER *************************************/
|
|
|
|
#endif /* __il_prph_h__ */
|