mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-20 14:09:28 +07:00
6de4c691ea
Core changes: - Add a new API for explicitly naming GPIO consumers, when needed. - Don't let userspace set values on input lines. While we do not think anyone would do this crazy thing we better plug the hole before someone uses it and think it's a nifty feature. - Avoid calling chip->request() for unused GPIOs. New drivers/subdrivers: - The Mediatek MT7621 is supported which is a big win for OpenWRT and similar router distributions using this chip, as it seems every major router manufacturer on the planet has made products using this chip: https://wikidevi.com/wiki/MediaTek_MT7621 - The Tegra 194 is now supported. - The IT87 driver now supports IT8786E and IT8718F super-IO chips. - Add support for Rockchip RK3328 in the syscon GPIO driver. Driver changes: - Handle the get/set_multiple() properly on MMIO chips with inverted direction registers. We didn't have this problem until a new chip appear that has get/set registers AND inverted direction bits, OK now we handle it. - A patch series making more error codes percolate upward properly for different errors on gpiochip_lock_as_irq(). - Get/set multiple for the OMAP driver, accelerating these multiple line operations if possible. - A coprocessor interface for the Aspeed driver. Sometimes a few GPIO lines need to be grabbed by a co-processor for doing automated tasks, sometimes they are available as GPIO lines. By adding an explicit API in this driver we make it possible for the two line consumers to coexist. (This work was made available on the ib-aspeed branch, which may be appearing in other pull requests.) - Implemented .get_direction() and open drain in the SCH311x driver. - Continuing cleanup of included headers in GPIO drivers. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJbdDIRAAoJEEEQszewGV1zSVcP/j+dj4HL6R1l8nK4pSqDhY++ Sz7TS5sg7IKa5uLQa7fiheOWllwxJy/gwZ73GjHDxbkT3pol2MlL8ByxC9u7gmm8 4N4xpW0gxO5vMbkbwVj/BdL6qN//JNiwlfp+RtHO74rjUIBgc2At1qL6vul5FEPm T1HUuyzpZ/jd/+CyGR4kg1FrvncMUrStQOdKWN4pI8qFEzFfsGXSeJ+GCBSCjYwD A2Ybad6uuBfdTjrWp2AV4GpKmdKwFeQPzPjm8/CKi97nyeOckNYjDJ+M/1xUR+bb sghn3yJf7+FKO8Qmh+ATvjauPBuDbX5d39FgmFEJRk+ay4Uf2GviroHlwzyWjOi2 5TUaRBubTJM8wFXICCvFvoK8CYLfJEmjJjkHeL12lkkmOlzlCRtcQ0aOLFM+37Ga T7Z6uloEbFK6lT1P6Q/1pfCEUOhofWKdwlWaPxs+7slhKojVJw092wu7J+arKoX9 uLTIe9qAgi3pDRlAkZLrnNwoKTXm18K8KtTv/Uiq8n+s+JRuxA9pAoki5u242lXF ow22OnTgGE3hc2D3o4H1yUPZYoxG9H6iDdir0eEnZpp61xboj44iRgvyDu4LxajS mPOtigcu2qaCEx6EDHTgLIvlKsyQAJmsb0cZ6K4OM3EtUMDfC3WbBzs/VVF//pUa rb+6ruWdwkzXd+ZrnvBq =4+uQ -----END PGP SIGNATURE----- Merge tag 'gpio-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.19 kernel cycle. I don't know if anything in particular stands out. Maybe the Aspeed coprocessor thing from Benji: Aspeed is doing baseboard management chips (BMC's) for servers etc. These Aspeed's are ARM processors that exist inside (I guess) Intel servers, and they are moving forward to using mainline Linux in those. This is one of the pieces of the puzzle to achive that. They are doing OpenBMC, it's pretty cool: https://lwn.net/Articles/683320/ Summary: Core changes: - Add a new API for explicitly naming GPIO consumers, when needed. - Don't let userspace set values on input lines. While we do not think anyone would do this crazy thing we better plug the hole before someone uses it and think it's a nifty feature. - Avoid calling chip->request() for unused GPIOs. New drivers/subdrivers: - The Mediatek MT7621 is supported which is a big win for OpenWRT and similar router distributions using this chip, as it seems every major router manufacturer on the planet has made products using this chip: https://wikidevi.com/wiki/MediaTek_MT7621 - The Tegra 194 is now supported. - The IT87 driver now supports IT8786E and IT8718F super-IO chips. - Add support for Rockchip RK3328 in the syscon GPIO driver. Driver changes: - Handle the get/set_multiple() properly on MMIO chips with inverted direction registers. We didn't have this problem until a new chip appear that has get/set registers AND inverted direction bits, OK now we handle it. - A patch series making more error codes percolate upward properly for different errors on gpiochip_lock_as_irq(). - Get/set multiple for the OMAP driver, accelerating these multiple line operations if possible. - A coprocessor interface for the Aspeed driver. Sometimes a few GPIO lines need to be grabbed by a co-processor for doing automated tasks, sometimes they are available as GPIO lines. By adding an explicit API in this driver we make it possible for the two line consumers to coexist. (This work was made available on the ib-aspeed branch, which may be appearing in other pull requests.) - Implemented .get_direction() and open drain in the SCH311x driver. - Continuing cleanup of included headers in GPIO drivers" * tag 'gpio-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (80 commits) gpio: it87: Add support for IT8613 gpio: it87: add support for IT8718F Super I/O. gpiolib: Avoid calling chip->request() for unused gpios gpio: tegra: Include the right header gpio: mmio: Fix up inverted direction registers gpio: xilinx: Use the right include gpio: timberdale: Include the right header gpio: tb10x: Use the right include gpiolib: Fix of_node inconsistency gpio: vr41xx: Bail out on gpiochip_lock_as_irq() error gpio: uniphier: Bail out on gpiochip_lock_as_irq() error gpio: xgene-sb: Don't shadow error code of gpiochip_lock_as_irq() gpio: em: Don't shadow error code of gpiochip_lock_as_irq() gpio: dwapb: Don't shadow error code of gpiochip_lock_as_irq() gpio: bcm-kona: Don't shadow error code of gpiochip_lock_as_irq() gpiolib: Don't shadow error code of gpiochip_lock_as_irq() gpio: syscon: rockchip: add GRF GPIO support for rk3328 gpio: omap: Add get/set_multiple() callbacks gpio: pxa: remove set but not used variable 'gpio_offset' gpio-it87: add support for IT8786E Super I/O ...
511 lines
14 KiB
C
511 lines
14 KiB
C
/*
|
|
* Copyright (C) 2017 Socionext Inc.
|
|
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
#include <dt-bindings/gpio/uniphier-gpio.h>
|
|
|
|
#define UNIPHIER_GPIO_BANK_MASK \
|
|
GENMASK((UNIPHIER_GPIO_LINES_PER_BANK) - 1, 0)
|
|
|
|
#define UNIPHIER_GPIO_IRQ_MAX_NUM 24
|
|
|
|
#define UNIPHIER_GPIO_PORT_DATA 0x0 /* data */
|
|
#define UNIPHIER_GPIO_PORT_DIR 0x4 /* direction (1:in, 0:out) */
|
|
#define UNIPHIER_GPIO_IRQ_EN 0x90 /* irq enable */
|
|
#define UNIPHIER_GPIO_IRQ_MODE 0x94 /* irq mode (1: both edge) */
|
|
#define UNIPHIER_GPIO_IRQ_FLT_EN 0x98 /* noise filter enable */
|
|
#define UNIPHIER_GPIO_IRQ_FLT_CYC 0x9c /* noise filter clock cycle */
|
|
|
|
struct uniphier_gpio_priv {
|
|
struct gpio_chip chip;
|
|
struct irq_chip irq_chip;
|
|
struct irq_domain *domain;
|
|
void __iomem *regs;
|
|
spinlock_t lock;
|
|
u32 saved_vals[0];
|
|
};
|
|
|
|
static unsigned int uniphier_gpio_bank_to_reg(unsigned int bank)
|
|
{
|
|
unsigned int reg;
|
|
|
|
reg = (bank + 1) * 8;
|
|
|
|
/*
|
|
* Unfortunately, the GPIO port registers are not contiguous because
|
|
* offset 0x90-0x9f is used for IRQ. Add 0x10 when crossing the region.
|
|
*/
|
|
if (reg >= UNIPHIER_GPIO_IRQ_EN)
|
|
reg += 0x10;
|
|
|
|
return reg;
|
|
}
|
|
|
|
static void uniphier_gpio_get_bank_and_mask(unsigned int offset,
|
|
unsigned int *bank, u32 *mask)
|
|
{
|
|
*bank = offset / UNIPHIER_GPIO_LINES_PER_BANK;
|
|
*mask = BIT(offset % UNIPHIER_GPIO_LINES_PER_BANK);
|
|
}
|
|
|
|
static void uniphier_gpio_reg_update(struct uniphier_gpio_priv *priv,
|
|
unsigned int reg, u32 mask, u32 val)
|
|
{
|
|
unsigned long flags;
|
|
u32 tmp;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
tmp = readl(priv->regs + reg);
|
|
tmp &= ~mask;
|
|
tmp |= mask & val;
|
|
writel(tmp, priv->regs + reg);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
static void uniphier_gpio_bank_write(struct gpio_chip *chip, unsigned int bank,
|
|
unsigned int reg, u32 mask, u32 val)
|
|
{
|
|
struct uniphier_gpio_priv *priv = gpiochip_get_data(chip);
|
|
|
|
if (!mask)
|
|
return;
|
|
|
|
uniphier_gpio_reg_update(priv, uniphier_gpio_bank_to_reg(bank) + reg,
|
|
mask, val);
|
|
}
|
|
|
|
static void uniphier_gpio_offset_write(struct gpio_chip *chip,
|
|
unsigned int offset, unsigned int reg,
|
|
int val)
|
|
{
|
|
unsigned int bank;
|
|
u32 mask;
|
|
|
|
uniphier_gpio_get_bank_and_mask(offset, &bank, &mask);
|
|
|
|
uniphier_gpio_bank_write(chip, bank, reg, mask, val ? mask : 0);
|
|
}
|
|
|
|
static int uniphier_gpio_offset_read(struct gpio_chip *chip,
|
|
unsigned int offset, unsigned int reg)
|
|
{
|
|
struct uniphier_gpio_priv *priv = gpiochip_get_data(chip);
|
|
unsigned int bank, reg_offset;
|
|
u32 mask;
|
|
|
|
uniphier_gpio_get_bank_and_mask(offset, &bank, &mask);
|
|
reg_offset = uniphier_gpio_bank_to_reg(bank) + reg;
|
|
|
|
return !!(readl(priv->regs + reg_offset) & mask);
|
|
}
|
|
|
|
static int uniphier_gpio_get_direction(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
return uniphier_gpio_offset_read(chip, offset, UNIPHIER_GPIO_PORT_DIR);
|
|
}
|
|
|
|
static int uniphier_gpio_direction_input(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
uniphier_gpio_offset_write(chip, offset, UNIPHIER_GPIO_PORT_DIR, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned int offset, int val)
|
|
{
|
|
uniphier_gpio_offset_write(chip, offset, UNIPHIER_GPIO_PORT_DATA, val);
|
|
uniphier_gpio_offset_write(chip, offset, UNIPHIER_GPIO_PORT_DIR, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_gpio_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
return uniphier_gpio_offset_read(chip, offset, UNIPHIER_GPIO_PORT_DATA);
|
|
}
|
|
|
|
static void uniphier_gpio_set(struct gpio_chip *chip,
|
|
unsigned int offset, int val)
|
|
{
|
|
uniphier_gpio_offset_write(chip, offset, UNIPHIER_GPIO_PORT_DATA, val);
|
|
}
|
|
|
|
static void uniphier_gpio_set_multiple(struct gpio_chip *chip,
|
|
unsigned long *mask, unsigned long *bits)
|
|
{
|
|
unsigned int bank, shift, bank_mask, bank_bits;
|
|
int i;
|
|
|
|
for (i = 0; i < chip->ngpio; i += UNIPHIER_GPIO_LINES_PER_BANK) {
|
|
bank = i / UNIPHIER_GPIO_LINES_PER_BANK;
|
|
shift = i % BITS_PER_LONG;
|
|
bank_mask = (mask[BIT_WORD(i)] >> shift) &
|
|
UNIPHIER_GPIO_BANK_MASK;
|
|
bank_bits = bits[BIT_WORD(i)] >> shift;
|
|
|
|
uniphier_gpio_bank_write(chip, bank, UNIPHIER_GPIO_PORT_DATA,
|
|
bank_mask, bank_bits);
|
|
}
|
|
}
|
|
|
|
static int uniphier_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct irq_fwspec fwspec;
|
|
|
|
if (offset < UNIPHIER_GPIO_IRQ_OFFSET)
|
|
return -ENXIO;
|
|
|
|
fwspec.fwnode = of_node_to_fwnode(chip->parent->of_node);
|
|
fwspec.param_count = 2;
|
|
fwspec.param[0] = offset - UNIPHIER_GPIO_IRQ_OFFSET;
|
|
/*
|
|
* IRQ_TYPE_NONE is rejected by the parent irq domain. Set LEVEL_HIGH
|
|
* temporarily. Anyway, ->irq_set_type() will override it later.
|
|
*/
|
|
fwspec.param[1] = IRQ_TYPE_LEVEL_HIGH;
|
|
|
|
return irq_create_fwspec_mapping(&fwspec);
|
|
}
|
|
|
|
static void uniphier_gpio_irq_mask(struct irq_data *data)
|
|
{
|
|
struct uniphier_gpio_priv *priv = data->chip_data;
|
|
u32 mask = BIT(data->hwirq);
|
|
|
|
uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, 0);
|
|
|
|
return irq_chip_mask_parent(data);
|
|
}
|
|
|
|
static void uniphier_gpio_irq_unmask(struct irq_data *data)
|
|
{
|
|
struct uniphier_gpio_priv *priv = data->chip_data;
|
|
u32 mask = BIT(data->hwirq);
|
|
|
|
uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_EN, mask, mask);
|
|
|
|
return irq_chip_unmask_parent(data);
|
|
}
|
|
|
|
static int uniphier_gpio_irq_set_type(struct irq_data *data, unsigned int type)
|
|
{
|
|
struct uniphier_gpio_priv *priv = data->chip_data;
|
|
u32 mask = BIT(data->hwirq);
|
|
u32 val = 0;
|
|
|
|
if (type == IRQ_TYPE_EDGE_BOTH) {
|
|
val = mask;
|
|
type = IRQ_TYPE_EDGE_FALLING;
|
|
}
|
|
|
|
uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_MODE, mask, val);
|
|
/* To enable both edge detection, the noise filter must be enabled. */
|
|
uniphier_gpio_reg_update(priv, UNIPHIER_GPIO_IRQ_FLT_EN, mask, val);
|
|
|
|
return irq_chip_set_type_parent(data, type);
|
|
}
|
|
|
|
static int uniphier_gpio_irq_get_parent_hwirq(struct uniphier_gpio_priv *priv,
|
|
unsigned int hwirq)
|
|
{
|
|
struct device_node *np = priv->chip.parent->of_node;
|
|
const __be32 *range;
|
|
u32 base, parent_base, size;
|
|
int len;
|
|
|
|
range = of_get_property(np, "socionext,interrupt-ranges", &len);
|
|
if (!range)
|
|
return -EINVAL;
|
|
|
|
len /= sizeof(*range);
|
|
|
|
for (; len >= 3; len -= 3) {
|
|
base = be32_to_cpu(*range++);
|
|
parent_base = be32_to_cpu(*range++);
|
|
size = be32_to_cpu(*range++);
|
|
|
|
if (base <= hwirq && hwirq < base + size)
|
|
return hwirq - base + parent_base;
|
|
}
|
|
|
|
return -ENOENT;
|
|
}
|
|
|
|
static int uniphier_gpio_irq_domain_translate(struct irq_domain *domain,
|
|
struct irq_fwspec *fwspec,
|
|
unsigned long *out_hwirq,
|
|
unsigned int *out_type)
|
|
{
|
|
if (WARN_ON(fwspec->param_count < 2))
|
|
return -EINVAL;
|
|
|
|
*out_hwirq = fwspec->param[0];
|
|
*out_type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_gpio_irq_domain_alloc(struct irq_domain *domain,
|
|
unsigned int virq,
|
|
unsigned int nr_irqs, void *arg)
|
|
{
|
|
struct uniphier_gpio_priv *priv = domain->host_data;
|
|
struct irq_fwspec parent_fwspec;
|
|
irq_hw_number_t hwirq;
|
|
unsigned int type;
|
|
int ret;
|
|
|
|
if (WARN_ON(nr_irqs != 1))
|
|
return -EINVAL;
|
|
|
|
ret = uniphier_gpio_irq_domain_translate(domain, arg, &hwirq, &type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = uniphier_gpio_irq_get_parent_hwirq(priv, hwirq);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* parent is UniPhier AIDET */
|
|
parent_fwspec.fwnode = domain->parent->fwnode;
|
|
parent_fwspec.param_count = 2;
|
|
parent_fwspec.param[0] = ret;
|
|
parent_fwspec.param[1] = (type == IRQ_TYPE_EDGE_BOTH) ?
|
|
IRQ_TYPE_EDGE_FALLING : type;
|
|
|
|
ret = irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
|
|
&priv->irq_chip, priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return irq_domain_alloc_irqs_parent(domain, virq, 1, &parent_fwspec);
|
|
}
|
|
|
|
static int uniphier_gpio_irq_domain_activate(struct irq_domain *domain,
|
|
struct irq_data *data, bool early)
|
|
{
|
|
struct uniphier_gpio_priv *priv = domain->host_data;
|
|
struct gpio_chip *chip = &priv->chip;
|
|
|
|
return gpiochip_lock_as_irq(chip, data->hwirq + UNIPHIER_GPIO_IRQ_OFFSET);
|
|
}
|
|
|
|
static void uniphier_gpio_irq_domain_deactivate(struct irq_domain *domain,
|
|
struct irq_data *data)
|
|
{
|
|
struct uniphier_gpio_priv *priv = domain->host_data;
|
|
struct gpio_chip *chip = &priv->chip;
|
|
|
|
gpiochip_unlock_as_irq(chip, data->hwirq + UNIPHIER_GPIO_IRQ_OFFSET);
|
|
}
|
|
|
|
static const struct irq_domain_ops uniphier_gpio_irq_domain_ops = {
|
|
.alloc = uniphier_gpio_irq_domain_alloc,
|
|
.free = irq_domain_free_irqs_common,
|
|
.activate = uniphier_gpio_irq_domain_activate,
|
|
.deactivate = uniphier_gpio_irq_domain_deactivate,
|
|
.translate = uniphier_gpio_irq_domain_translate,
|
|
};
|
|
|
|
static void uniphier_gpio_hw_init(struct uniphier_gpio_priv *priv)
|
|
{
|
|
/*
|
|
* Due to the hardware design, the noise filter must be enabled to
|
|
* detect both edge interrupts. This filter is intended to remove the
|
|
* noise from the irq lines. It does not work for GPIO input, so GPIO
|
|
* debounce is not supported. Unfortunately, the filter period is
|
|
* shared among all irq lines. Just choose a sensible period here.
|
|
*/
|
|
writel(0xff, priv->regs + UNIPHIER_GPIO_IRQ_FLT_CYC);
|
|
}
|
|
|
|
static unsigned int uniphier_gpio_get_nbanks(unsigned int ngpio)
|
|
{
|
|
return DIV_ROUND_UP(ngpio, UNIPHIER_GPIO_LINES_PER_BANK);
|
|
}
|
|
|
|
static int uniphier_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *parent_np;
|
|
struct irq_domain *parent_domain;
|
|
struct uniphier_gpio_priv *priv;
|
|
struct gpio_chip *chip;
|
|
struct irq_chip *irq_chip;
|
|
struct resource *regs;
|
|
unsigned int nregs;
|
|
u32 ngpios;
|
|
int ret;
|
|
|
|
parent_np = of_irq_find_parent(dev->of_node);
|
|
if (!parent_np)
|
|
return -ENXIO;
|
|
|
|
parent_domain = irq_find_host(parent_np);
|
|
of_node_put(parent_np);
|
|
if (!parent_domain)
|
|
return -EPROBE_DEFER;
|
|
|
|
ret = of_property_read_u32(dev->of_node, "ngpios", &ngpios);
|
|
if (ret)
|
|
return ret;
|
|
|
|
nregs = uniphier_gpio_get_nbanks(ngpios) * 2 + 3;
|
|
priv = devm_kzalloc(dev, struct_size(priv, saved_vals, nregs),
|
|
GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv->regs = devm_ioremap_resource(dev, regs);
|
|
if (IS_ERR(priv->regs))
|
|
return PTR_ERR(priv->regs);
|
|
|
|
spin_lock_init(&priv->lock);
|
|
|
|
chip = &priv->chip;
|
|
chip->label = dev_name(dev);
|
|
chip->parent = dev;
|
|
chip->request = gpiochip_generic_request;
|
|
chip->free = gpiochip_generic_free;
|
|
chip->get_direction = uniphier_gpio_get_direction;
|
|
chip->direction_input = uniphier_gpio_direction_input;
|
|
chip->direction_output = uniphier_gpio_direction_output;
|
|
chip->get = uniphier_gpio_get;
|
|
chip->set = uniphier_gpio_set;
|
|
chip->set_multiple = uniphier_gpio_set_multiple;
|
|
chip->to_irq = uniphier_gpio_to_irq;
|
|
chip->base = -1;
|
|
chip->ngpio = ngpios;
|
|
|
|
irq_chip = &priv->irq_chip;
|
|
irq_chip->name = dev_name(dev);
|
|
irq_chip->irq_mask = uniphier_gpio_irq_mask;
|
|
irq_chip->irq_unmask = uniphier_gpio_irq_unmask;
|
|
irq_chip->irq_eoi = irq_chip_eoi_parent;
|
|
irq_chip->irq_set_affinity = irq_chip_set_affinity_parent;
|
|
irq_chip->irq_set_type = uniphier_gpio_irq_set_type;
|
|
|
|
uniphier_gpio_hw_init(priv);
|
|
|
|
ret = devm_gpiochip_add_data(dev, chip, priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->domain = irq_domain_create_hierarchy(
|
|
parent_domain, 0,
|
|
UNIPHIER_GPIO_IRQ_MAX_NUM,
|
|
of_node_to_fwnode(dev->of_node),
|
|
&uniphier_gpio_irq_domain_ops, priv);
|
|
if (!priv->domain)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
struct uniphier_gpio_priv *priv = platform_get_drvdata(pdev);
|
|
|
|
irq_domain_remove(priv->domain);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused uniphier_gpio_suspend(struct device *dev)
|
|
{
|
|
struct uniphier_gpio_priv *priv = dev_get_drvdata(dev);
|
|
unsigned int nbanks = uniphier_gpio_get_nbanks(priv->chip.ngpio);
|
|
u32 *val = priv->saved_vals;
|
|
unsigned int reg;
|
|
int i;
|
|
|
|
for (i = 0; i < nbanks; i++) {
|
|
reg = uniphier_gpio_bank_to_reg(i);
|
|
|
|
*val++ = readl(priv->regs + reg + UNIPHIER_GPIO_PORT_DATA);
|
|
*val++ = readl(priv->regs + reg + UNIPHIER_GPIO_PORT_DIR);
|
|
}
|
|
|
|
*val++ = readl(priv->regs + UNIPHIER_GPIO_IRQ_EN);
|
|
*val++ = readl(priv->regs + UNIPHIER_GPIO_IRQ_MODE);
|
|
*val++ = readl(priv->regs + UNIPHIER_GPIO_IRQ_FLT_EN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused uniphier_gpio_resume(struct device *dev)
|
|
{
|
|
struct uniphier_gpio_priv *priv = dev_get_drvdata(dev);
|
|
unsigned int nbanks = uniphier_gpio_get_nbanks(priv->chip.ngpio);
|
|
const u32 *val = priv->saved_vals;
|
|
unsigned int reg;
|
|
int i;
|
|
|
|
for (i = 0; i < nbanks; i++) {
|
|
reg = uniphier_gpio_bank_to_reg(i);
|
|
|
|
writel(*val++, priv->regs + reg + UNIPHIER_GPIO_PORT_DATA);
|
|
writel(*val++, priv->regs + reg + UNIPHIER_GPIO_PORT_DIR);
|
|
}
|
|
|
|
writel(*val++, priv->regs + UNIPHIER_GPIO_IRQ_EN);
|
|
writel(*val++, priv->regs + UNIPHIER_GPIO_IRQ_MODE);
|
|
writel(*val++, priv->regs + UNIPHIER_GPIO_IRQ_FLT_EN);
|
|
|
|
uniphier_gpio_hw_init(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops uniphier_gpio_pm_ops = {
|
|
SET_LATE_SYSTEM_SLEEP_PM_OPS(uniphier_gpio_suspend,
|
|
uniphier_gpio_resume)
|
|
};
|
|
|
|
static const struct of_device_id uniphier_gpio_match[] = {
|
|
{ .compatible = "socionext,uniphier-gpio" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, uniphier_gpio_match);
|
|
|
|
static struct platform_driver uniphier_gpio_driver = {
|
|
.probe = uniphier_gpio_probe,
|
|
.remove = uniphier_gpio_remove,
|
|
.driver = {
|
|
.name = "uniphier-gpio",
|
|
.of_match_table = uniphier_gpio_match,
|
|
.pm = &uniphier_gpio_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(uniphier_gpio_driver);
|
|
|
|
MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>");
|
|
MODULE_DESCRIPTION("UniPhier GPIO driver");
|
|
MODULE_LICENSE("GPL v2");
|