mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 23:46:09 +07:00
995c5a509f
Currently only the DRM_MODE_REFLECT_Y rotation is supported. The driver already supports reflection on the Y axis via a custom flag which is not very useful because it requires custom userspace. Add the standard rotation property that supports 0 degree rotation and Y axis reflection for primary and overlay planes to provide a better interface than the custom flag. v2: keep custom flag for ABI compatibility (Dmitry) Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2515 lines
68 KiB
C
2515 lines
68 KiB
C
/*
|
|
* Copyright (C) 2012 Avionic Design GmbH
|
|
* Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/iommu.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/reset.h>
|
|
|
|
#include <soc/tegra/pmc.h>
|
|
|
|
#include "dc.h"
|
|
#include "drm.h"
|
|
#include "gem.h"
|
|
#include "hub.h"
|
|
#include "plane.h"
|
|
|
|
#include <drm/drm_atomic.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_plane_helper.h>
|
|
|
|
static void tegra_dc_stats_reset(struct tegra_dc_stats *stats)
|
|
{
|
|
stats->frames = 0;
|
|
stats->vblank = 0;
|
|
stats->underflow = 0;
|
|
stats->overflow = 0;
|
|
}
|
|
|
|
/* Reads the active copy of a register. */
|
|
static u32 tegra_dc_readl_active(struct tegra_dc *dc, unsigned long offset)
|
|
{
|
|
u32 value;
|
|
|
|
tegra_dc_writel(dc, READ_MUX, DC_CMD_STATE_ACCESS);
|
|
value = tegra_dc_readl(dc, offset);
|
|
tegra_dc_writel(dc, 0, DC_CMD_STATE_ACCESS);
|
|
|
|
return value;
|
|
}
|
|
|
|
static inline unsigned int tegra_plane_offset(struct tegra_plane *plane,
|
|
unsigned int offset)
|
|
{
|
|
if (offset >= 0x500 && offset <= 0x638) {
|
|
offset = 0x000 + (offset - 0x500);
|
|
return plane->offset + offset;
|
|
}
|
|
|
|
if (offset >= 0x700 && offset <= 0x719) {
|
|
offset = 0x180 + (offset - 0x700);
|
|
return plane->offset + offset;
|
|
}
|
|
|
|
if (offset >= 0x800 && offset <= 0x839) {
|
|
offset = 0x1c0 + (offset - 0x800);
|
|
return plane->offset + offset;
|
|
}
|
|
|
|
dev_WARN(plane->dc->dev, "invalid offset: %x\n", offset);
|
|
|
|
return plane->offset + offset;
|
|
}
|
|
|
|
static inline u32 tegra_plane_readl(struct tegra_plane *plane,
|
|
unsigned int offset)
|
|
{
|
|
return tegra_dc_readl(plane->dc, tegra_plane_offset(plane, offset));
|
|
}
|
|
|
|
static inline void tegra_plane_writel(struct tegra_plane *plane, u32 value,
|
|
unsigned int offset)
|
|
{
|
|
tegra_dc_writel(plane->dc, value, tegra_plane_offset(plane, offset));
|
|
}
|
|
|
|
bool tegra_dc_has_output(struct tegra_dc *dc, struct device *dev)
|
|
{
|
|
struct device_node *np = dc->dev->of_node;
|
|
struct of_phandle_iterator it;
|
|
int err;
|
|
|
|
of_for_each_phandle(&it, err, np, "nvidia,outputs", NULL, 0)
|
|
if (it.node == dev->of_node)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* Double-buffered registers have two copies: ASSEMBLY and ACTIVE. When the
|
|
* *_ACT_REQ bits are set the ASSEMBLY copy is latched into the ACTIVE copy.
|
|
* Latching happens mmediately if the display controller is in STOP mode or
|
|
* on the next frame boundary otherwise.
|
|
*
|
|
* Triple-buffered registers have three copies: ASSEMBLY, ARM and ACTIVE. The
|
|
* ASSEMBLY copy is latched into the ARM copy immediately after *_UPDATE bits
|
|
* are written. When the *_ACT_REQ bits are written, the ARM copy is latched
|
|
* into the ACTIVE copy, either immediately if the display controller is in
|
|
* STOP mode, or at the next frame boundary otherwise.
|
|
*/
|
|
void tegra_dc_commit(struct tegra_dc *dc)
|
|
{
|
|
tegra_dc_writel(dc, GENERAL_ACT_REQ << 8, DC_CMD_STATE_CONTROL);
|
|
tegra_dc_writel(dc, GENERAL_ACT_REQ, DC_CMD_STATE_CONTROL);
|
|
}
|
|
|
|
static inline u32 compute_dda_inc(unsigned int in, unsigned int out, bool v,
|
|
unsigned int bpp)
|
|
{
|
|
fixed20_12 outf = dfixed_init(out);
|
|
fixed20_12 inf = dfixed_init(in);
|
|
u32 dda_inc;
|
|
int max;
|
|
|
|
if (v)
|
|
max = 15;
|
|
else {
|
|
switch (bpp) {
|
|
case 2:
|
|
max = 8;
|
|
break;
|
|
|
|
default:
|
|
WARN_ON_ONCE(1);
|
|
/* fallthrough */
|
|
case 4:
|
|
max = 4;
|
|
break;
|
|
}
|
|
}
|
|
|
|
outf.full = max_t(u32, outf.full - dfixed_const(1), dfixed_const(1));
|
|
inf.full -= dfixed_const(1);
|
|
|
|
dda_inc = dfixed_div(inf, outf);
|
|
dda_inc = min_t(u32, dda_inc, dfixed_const(max));
|
|
|
|
return dda_inc;
|
|
}
|
|
|
|
static inline u32 compute_initial_dda(unsigned int in)
|
|
{
|
|
fixed20_12 inf = dfixed_init(in);
|
|
return dfixed_frac(inf);
|
|
}
|
|
|
|
static void tegra_plane_setup_blending_legacy(struct tegra_plane *plane)
|
|
{
|
|
u32 background[3] = {
|
|
BLEND_WEIGHT1(0) | BLEND_WEIGHT0(0) | BLEND_COLOR_KEY_NONE,
|
|
BLEND_WEIGHT1(0) | BLEND_WEIGHT0(0) | BLEND_COLOR_KEY_NONE,
|
|
BLEND_WEIGHT1(0) | BLEND_WEIGHT0(0) | BLEND_COLOR_KEY_NONE,
|
|
};
|
|
u32 foreground = BLEND_WEIGHT1(255) | BLEND_WEIGHT0(255) |
|
|
BLEND_COLOR_KEY_NONE;
|
|
u32 blendnokey = BLEND_WEIGHT1(255) | BLEND_WEIGHT0(255);
|
|
struct tegra_plane_state *state;
|
|
u32 blending[2];
|
|
unsigned int i;
|
|
|
|
/* disable blending for non-overlapping case */
|
|
tegra_plane_writel(plane, blendnokey, DC_WIN_BLEND_NOKEY);
|
|
tegra_plane_writel(plane, foreground, DC_WIN_BLEND_1WIN);
|
|
|
|
state = to_tegra_plane_state(plane->base.state);
|
|
|
|
if (state->opaque) {
|
|
/*
|
|
* Since custom fix-weight blending isn't utilized and weight
|
|
* of top window is set to max, we can enforce dependent
|
|
* blending which in this case results in transparent bottom
|
|
* window if top window is opaque and if top window enables
|
|
* alpha blending, then bottom window is getting alpha value
|
|
* of 1 minus the sum of alpha components of the overlapping
|
|
* plane.
|
|
*/
|
|
background[0] |= BLEND_CONTROL_DEPENDENT;
|
|
background[1] |= BLEND_CONTROL_DEPENDENT;
|
|
|
|
/*
|
|
* The region where three windows overlap is the intersection
|
|
* of the two regions where two windows overlap. It contributes
|
|
* to the area if all of the windows on top of it have an alpha
|
|
* component.
|
|
*/
|
|
switch (state->base.normalized_zpos) {
|
|
case 0:
|
|
if (state->blending[0].alpha &&
|
|
state->blending[1].alpha)
|
|
background[2] |= BLEND_CONTROL_DEPENDENT;
|
|
break;
|
|
|
|
case 1:
|
|
background[2] |= BLEND_CONTROL_DEPENDENT;
|
|
break;
|
|
}
|
|
} else {
|
|
/*
|
|
* Enable alpha blending if pixel format has an alpha
|
|
* component.
|
|
*/
|
|
foreground |= BLEND_CONTROL_ALPHA;
|
|
|
|
/*
|
|
* If any of the windows on top of this window is opaque, it
|
|
* will completely conceal this window within that area. If
|
|
* top window has an alpha component, it is blended over the
|
|
* bottom window.
|
|
*/
|
|
for (i = 0; i < 2; i++) {
|
|
if (state->blending[i].alpha &&
|
|
state->blending[i].top)
|
|
background[i] |= BLEND_CONTROL_DEPENDENT;
|
|
}
|
|
|
|
switch (state->base.normalized_zpos) {
|
|
case 0:
|
|
if (state->blending[0].alpha &&
|
|
state->blending[1].alpha)
|
|
background[2] |= BLEND_CONTROL_DEPENDENT;
|
|
break;
|
|
|
|
case 1:
|
|
/*
|
|
* When both middle and topmost windows have an alpha,
|
|
* these windows a mixed together and then the result
|
|
* is blended over the bottom window.
|
|
*/
|
|
if (state->blending[0].alpha &&
|
|
state->blending[0].top)
|
|
background[2] |= BLEND_CONTROL_ALPHA;
|
|
|
|
if (state->blending[1].alpha &&
|
|
state->blending[1].top)
|
|
background[2] |= BLEND_CONTROL_ALPHA;
|
|
break;
|
|
}
|
|
}
|
|
|
|
switch (state->base.normalized_zpos) {
|
|
case 0:
|
|
tegra_plane_writel(plane, background[0], DC_WIN_BLEND_2WIN_X);
|
|
tegra_plane_writel(plane, background[1], DC_WIN_BLEND_2WIN_Y);
|
|
tegra_plane_writel(plane, background[2], DC_WIN_BLEND_3WIN_XY);
|
|
break;
|
|
|
|
case 1:
|
|
/*
|
|
* If window B / C is topmost, then X / Y registers are
|
|
* matching the order of blending[...] state indices,
|
|
* otherwise a swap is required.
|
|
*/
|
|
if (!state->blending[0].top && state->blending[1].top) {
|
|
blending[0] = foreground;
|
|
blending[1] = background[1];
|
|
} else {
|
|
blending[0] = background[0];
|
|
blending[1] = foreground;
|
|
}
|
|
|
|
tegra_plane_writel(plane, blending[0], DC_WIN_BLEND_2WIN_X);
|
|
tegra_plane_writel(plane, blending[1], DC_WIN_BLEND_2WIN_Y);
|
|
tegra_plane_writel(plane, background[2], DC_WIN_BLEND_3WIN_XY);
|
|
break;
|
|
|
|
case 2:
|
|
tegra_plane_writel(plane, foreground, DC_WIN_BLEND_2WIN_X);
|
|
tegra_plane_writel(plane, foreground, DC_WIN_BLEND_2WIN_Y);
|
|
tegra_plane_writel(plane, foreground, DC_WIN_BLEND_3WIN_XY);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void tegra_plane_setup_blending(struct tegra_plane *plane,
|
|
const struct tegra_dc_window *window)
|
|
{
|
|
u32 value;
|
|
|
|
value = BLEND_FACTOR_DST_ALPHA_ZERO | BLEND_FACTOR_SRC_ALPHA_K2 |
|
|
BLEND_FACTOR_DST_COLOR_NEG_K1_TIMES_SRC |
|
|
BLEND_FACTOR_SRC_COLOR_K1_TIMES_SRC;
|
|
tegra_plane_writel(plane, value, DC_WIN_BLEND_MATCH_SELECT);
|
|
|
|
value = BLEND_FACTOR_DST_ALPHA_ZERO | BLEND_FACTOR_SRC_ALPHA_K2 |
|
|
BLEND_FACTOR_DST_COLOR_NEG_K1_TIMES_SRC |
|
|
BLEND_FACTOR_SRC_COLOR_K1_TIMES_SRC;
|
|
tegra_plane_writel(plane, value, DC_WIN_BLEND_NOMATCH_SELECT);
|
|
|
|
value = K2(255) | K1(255) | WINDOW_LAYER_DEPTH(255 - window->zpos);
|
|
tegra_plane_writel(plane, value, DC_WIN_BLEND_LAYER_CONTROL);
|
|
}
|
|
|
|
static bool
|
|
tegra_plane_use_horizontal_filtering(struct tegra_plane *plane,
|
|
const struct tegra_dc_window *window)
|
|
{
|
|
struct tegra_dc *dc = plane->dc;
|
|
|
|
if (window->src.w == window->dst.w)
|
|
return false;
|
|
|
|
if (plane->index == 0 && dc->soc->has_win_a_without_filters)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool
|
|
tegra_plane_use_vertical_filtering(struct tegra_plane *plane,
|
|
const struct tegra_dc_window *window)
|
|
{
|
|
struct tegra_dc *dc = plane->dc;
|
|
|
|
if (window->src.h == window->dst.h)
|
|
return false;
|
|
|
|
if (plane->index == 0 && dc->soc->has_win_a_without_filters)
|
|
return false;
|
|
|
|
if (plane->index == 2 && dc->soc->has_win_c_without_vert_filter)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static void tegra_dc_setup_window(struct tegra_plane *plane,
|
|
const struct tegra_dc_window *window)
|
|
{
|
|
unsigned h_offset, v_offset, h_size, v_size, h_dda, v_dda, bpp;
|
|
struct tegra_dc *dc = plane->dc;
|
|
bool yuv, planar;
|
|
u32 value;
|
|
|
|
/*
|
|
* For YUV planar modes, the number of bytes per pixel takes into
|
|
* account only the luma component and therefore is 1.
|
|
*/
|
|
yuv = tegra_plane_format_is_yuv(window->format, &planar);
|
|
if (!yuv)
|
|
bpp = window->bits_per_pixel / 8;
|
|
else
|
|
bpp = planar ? 1 : 2;
|
|
|
|
tegra_plane_writel(plane, window->format, DC_WIN_COLOR_DEPTH);
|
|
tegra_plane_writel(plane, window->swap, DC_WIN_BYTE_SWAP);
|
|
|
|
value = V_POSITION(window->dst.y) | H_POSITION(window->dst.x);
|
|
tegra_plane_writel(plane, value, DC_WIN_POSITION);
|
|
|
|
value = V_SIZE(window->dst.h) | H_SIZE(window->dst.w);
|
|
tegra_plane_writel(plane, value, DC_WIN_SIZE);
|
|
|
|
h_offset = window->src.x * bpp;
|
|
v_offset = window->src.y;
|
|
h_size = window->src.w * bpp;
|
|
v_size = window->src.h;
|
|
|
|
value = V_PRESCALED_SIZE(v_size) | H_PRESCALED_SIZE(h_size);
|
|
tegra_plane_writel(plane, value, DC_WIN_PRESCALED_SIZE);
|
|
|
|
/*
|
|
* For DDA computations the number of bytes per pixel for YUV planar
|
|
* modes needs to take into account all Y, U and V components.
|
|
*/
|
|
if (yuv && planar)
|
|
bpp = 2;
|
|
|
|
h_dda = compute_dda_inc(window->src.w, window->dst.w, false, bpp);
|
|
v_dda = compute_dda_inc(window->src.h, window->dst.h, true, bpp);
|
|
|
|
value = V_DDA_INC(v_dda) | H_DDA_INC(h_dda);
|
|
tegra_plane_writel(plane, value, DC_WIN_DDA_INC);
|
|
|
|
h_dda = compute_initial_dda(window->src.x);
|
|
v_dda = compute_initial_dda(window->src.y);
|
|
|
|
tegra_plane_writel(plane, h_dda, DC_WIN_H_INITIAL_DDA);
|
|
tegra_plane_writel(plane, v_dda, DC_WIN_V_INITIAL_DDA);
|
|
|
|
tegra_plane_writel(plane, 0, DC_WIN_UV_BUF_STRIDE);
|
|
tegra_plane_writel(plane, 0, DC_WIN_BUF_STRIDE);
|
|
|
|
tegra_plane_writel(plane, window->base[0], DC_WINBUF_START_ADDR);
|
|
|
|
if (yuv && planar) {
|
|
tegra_plane_writel(plane, window->base[1], DC_WINBUF_START_ADDR_U);
|
|
tegra_plane_writel(plane, window->base[2], DC_WINBUF_START_ADDR_V);
|
|
value = window->stride[1] << 16 | window->stride[0];
|
|
tegra_plane_writel(plane, value, DC_WIN_LINE_STRIDE);
|
|
} else {
|
|
tegra_plane_writel(plane, window->stride[0], DC_WIN_LINE_STRIDE);
|
|
}
|
|
|
|
if (window->bottom_up)
|
|
v_offset += window->src.h - 1;
|
|
|
|
tegra_plane_writel(plane, h_offset, DC_WINBUF_ADDR_H_OFFSET);
|
|
tegra_plane_writel(plane, v_offset, DC_WINBUF_ADDR_V_OFFSET);
|
|
|
|
if (dc->soc->supports_block_linear) {
|
|
unsigned long height = window->tiling.value;
|
|
|
|
switch (window->tiling.mode) {
|
|
case TEGRA_BO_TILING_MODE_PITCH:
|
|
value = DC_WINBUF_SURFACE_KIND_PITCH;
|
|
break;
|
|
|
|
case TEGRA_BO_TILING_MODE_TILED:
|
|
value = DC_WINBUF_SURFACE_KIND_TILED;
|
|
break;
|
|
|
|
case TEGRA_BO_TILING_MODE_BLOCK:
|
|
value = DC_WINBUF_SURFACE_KIND_BLOCK_HEIGHT(height) |
|
|
DC_WINBUF_SURFACE_KIND_BLOCK;
|
|
break;
|
|
}
|
|
|
|
tegra_plane_writel(plane, value, DC_WINBUF_SURFACE_KIND);
|
|
} else {
|
|
switch (window->tiling.mode) {
|
|
case TEGRA_BO_TILING_MODE_PITCH:
|
|
value = DC_WIN_BUFFER_ADDR_MODE_LINEAR_UV |
|
|
DC_WIN_BUFFER_ADDR_MODE_LINEAR;
|
|
break;
|
|
|
|
case TEGRA_BO_TILING_MODE_TILED:
|
|
value = DC_WIN_BUFFER_ADDR_MODE_TILE_UV |
|
|
DC_WIN_BUFFER_ADDR_MODE_TILE;
|
|
break;
|
|
|
|
case TEGRA_BO_TILING_MODE_BLOCK:
|
|
/*
|
|
* No need to handle this here because ->atomic_check
|
|
* will already have filtered it out.
|
|
*/
|
|
break;
|
|
}
|
|
|
|
tegra_plane_writel(plane, value, DC_WIN_BUFFER_ADDR_MODE);
|
|
}
|
|
|
|
value = WIN_ENABLE;
|
|
|
|
if (yuv) {
|
|
/* setup default colorspace conversion coefficients */
|
|
tegra_plane_writel(plane, 0x00f0, DC_WIN_CSC_YOF);
|
|
tegra_plane_writel(plane, 0x012a, DC_WIN_CSC_KYRGB);
|
|
tegra_plane_writel(plane, 0x0000, DC_WIN_CSC_KUR);
|
|
tegra_plane_writel(plane, 0x0198, DC_WIN_CSC_KVR);
|
|
tegra_plane_writel(plane, 0x039b, DC_WIN_CSC_KUG);
|
|
tegra_plane_writel(plane, 0x032f, DC_WIN_CSC_KVG);
|
|
tegra_plane_writel(plane, 0x0204, DC_WIN_CSC_KUB);
|
|
tegra_plane_writel(plane, 0x0000, DC_WIN_CSC_KVB);
|
|
|
|
value |= CSC_ENABLE;
|
|
} else if (window->bits_per_pixel < 24) {
|
|
value |= COLOR_EXPAND;
|
|
}
|
|
|
|
if (window->bottom_up)
|
|
value |= V_DIRECTION;
|
|
|
|
if (tegra_plane_use_horizontal_filtering(plane, window)) {
|
|
/*
|
|
* Enable horizontal 6-tap filter and set filtering
|
|
* coefficients to the default values defined in TRM.
|
|
*/
|
|
tegra_plane_writel(plane, 0x00008000, DC_WIN_H_FILTER_P(0));
|
|
tegra_plane_writel(plane, 0x3e087ce1, DC_WIN_H_FILTER_P(1));
|
|
tegra_plane_writel(plane, 0x3b117ac1, DC_WIN_H_FILTER_P(2));
|
|
tegra_plane_writel(plane, 0x591b73aa, DC_WIN_H_FILTER_P(3));
|
|
tegra_plane_writel(plane, 0x57256d9a, DC_WIN_H_FILTER_P(4));
|
|
tegra_plane_writel(plane, 0x552f668b, DC_WIN_H_FILTER_P(5));
|
|
tegra_plane_writel(plane, 0x73385e8b, DC_WIN_H_FILTER_P(6));
|
|
tegra_plane_writel(plane, 0x72435583, DC_WIN_H_FILTER_P(7));
|
|
tegra_plane_writel(plane, 0x714c4c8b, DC_WIN_H_FILTER_P(8));
|
|
tegra_plane_writel(plane, 0x70554393, DC_WIN_H_FILTER_P(9));
|
|
tegra_plane_writel(plane, 0x715e389b, DC_WIN_H_FILTER_P(10));
|
|
tegra_plane_writel(plane, 0x71662faa, DC_WIN_H_FILTER_P(11));
|
|
tegra_plane_writel(plane, 0x536d25ba, DC_WIN_H_FILTER_P(12));
|
|
tegra_plane_writel(plane, 0x55731bca, DC_WIN_H_FILTER_P(13));
|
|
tegra_plane_writel(plane, 0x387a11d9, DC_WIN_H_FILTER_P(14));
|
|
tegra_plane_writel(plane, 0x3c7c08f1, DC_WIN_H_FILTER_P(15));
|
|
|
|
value |= H_FILTER;
|
|
}
|
|
|
|
if (tegra_plane_use_vertical_filtering(plane, window)) {
|
|
unsigned int i, k;
|
|
|
|
/*
|
|
* Enable vertical 2-tap filter and set filtering
|
|
* coefficients to the default values defined in TRM.
|
|
*/
|
|
for (i = 0, k = 128; i < 16; i++, k -= 8)
|
|
tegra_plane_writel(plane, k, DC_WIN_V_FILTER_P(i));
|
|
|
|
value |= V_FILTER;
|
|
}
|
|
|
|
tegra_plane_writel(plane, value, DC_WIN_WIN_OPTIONS);
|
|
|
|
if (dc->soc->has_legacy_blending)
|
|
tegra_plane_setup_blending_legacy(plane);
|
|
else
|
|
tegra_plane_setup_blending(plane, window);
|
|
}
|
|
|
|
static const u32 tegra20_primary_formats[] = {
|
|
DRM_FORMAT_ARGB4444,
|
|
DRM_FORMAT_ARGB1555,
|
|
DRM_FORMAT_RGB565,
|
|
DRM_FORMAT_RGBA5551,
|
|
DRM_FORMAT_ABGR8888,
|
|
DRM_FORMAT_ARGB8888,
|
|
/* non-native formats */
|
|
DRM_FORMAT_XRGB1555,
|
|
DRM_FORMAT_RGBX5551,
|
|
DRM_FORMAT_XBGR8888,
|
|
DRM_FORMAT_XRGB8888,
|
|
};
|
|
|
|
static const u64 tegra20_modifiers[] = {
|
|
DRM_FORMAT_MOD_LINEAR,
|
|
DRM_FORMAT_MOD_NVIDIA_TEGRA_TILED,
|
|
DRM_FORMAT_MOD_INVALID
|
|
};
|
|
|
|
static const u32 tegra114_primary_formats[] = {
|
|
DRM_FORMAT_ARGB4444,
|
|
DRM_FORMAT_ARGB1555,
|
|
DRM_FORMAT_RGB565,
|
|
DRM_FORMAT_RGBA5551,
|
|
DRM_FORMAT_ABGR8888,
|
|
DRM_FORMAT_ARGB8888,
|
|
/* new on Tegra114 */
|
|
DRM_FORMAT_ABGR4444,
|
|
DRM_FORMAT_ABGR1555,
|
|
DRM_FORMAT_BGRA5551,
|
|
DRM_FORMAT_XRGB1555,
|
|
DRM_FORMAT_RGBX5551,
|
|
DRM_FORMAT_XBGR1555,
|
|
DRM_FORMAT_BGRX5551,
|
|
DRM_FORMAT_BGR565,
|
|
DRM_FORMAT_BGRA8888,
|
|
DRM_FORMAT_RGBA8888,
|
|
DRM_FORMAT_XRGB8888,
|
|
DRM_FORMAT_XBGR8888,
|
|
};
|
|
|
|
static const u32 tegra124_primary_formats[] = {
|
|
DRM_FORMAT_ARGB4444,
|
|
DRM_FORMAT_ARGB1555,
|
|
DRM_FORMAT_RGB565,
|
|
DRM_FORMAT_RGBA5551,
|
|
DRM_FORMAT_ABGR8888,
|
|
DRM_FORMAT_ARGB8888,
|
|
/* new on Tegra114 */
|
|
DRM_FORMAT_ABGR4444,
|
|
DRM_FORMAT_ABGR1555,
|
|
DRM_FORMAT_BGRA5551,
|
|
DRM_FORMAT_XRGB1555,
|
|
DRM_FORMAT_RGBX5551,
|
|
DRM_FORMAT_XBGR1555,
|
|
DRM_FORMAT_BGRX5551,
|
|
DRM_FORMAT_BGR565,
|
|
DRM_FORMAT_BGRA8888,
|
|
DRM_FORMAT_RGBA8888,
|
|
DRM_FORMAT_XRGB8888,
|
|
DRM_FORMAT_XBGR8888,
|
|
/* new on Tegra124 */
|
|
DRM_FORMAT_RGBX8888,
|
|
DRM_FORMAT_BGRX8888,
|
|
};
|
|
|
|
static const u64 tegra124_modifiers[] = {
|
|
DRM_FORMAT_MOD_LINEAR,
|
|
DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(0),
|
|
DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(1),
|
|
DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(2),
|
|
DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(3),
|
|
DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(4),
|
|
DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(5),
|
|
DRM_FORMAT_MOD_INVALID
|
|
};
|
|
|
|
static int tegra_plane_atomic_check(struct drm_plane *plane,
|
|
struct drm_plane_state *state)
|
|
{
|
|
struct tegra_plane_state *plane_state = to_tegra_plane_state(state);
|
|
unsigned int rotation = DRM_MODE_ROTATE_0 | DRM_MODE_REFLECT_Y;
|
|
struct tegra_bo_tiling *tiling = &plane_state->tiling;
|
|
struct tegra_plane *tegra = to_tegra_plane(plane);
|
|
struct tegra_dc *dc = to_tegra_dc(state->crtc);
|
|
int err;
|
|
|
|
/* no need for further checks if the plane is being disabled */
|
|
if (!state->crtc)
|
|
return 0;
|
|
|
|
err = tegra_plane_format(state->fb->format->format,
|
|
&plane_state->format,
|
|
&plane_state->swap);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/*
|
|
* Tegra20 and Tegra30 are special cases here because they support
|
|
* only variants of specific formats with an alpha component, but not
|
|
* the corresponding opaque formats. However, the opaque formats can
|
|
* be emulated by disabling alpha blending for the plane.
|
|
*/
|
|
if (dc->soc->has_legacy_blending) {
|
|
err = tegra_plane_setup_legacy_state(tegra, plane_state);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
err = tegra_fb_get_tiling(state->fb, tiling);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (tiling->mode == TEGRA_BO_TILING_MODE_BLOCK &&
|
|
!dc->soc->supports_block_linear) {
|
|
DRM_ERROR("hardware doesn't support block linear mode\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
rotation = drm_rotation_simplify(state->rotation, rotation);
|
|
|
|
if (rotation & DRM_MODE_REFLECT_Y)
|
|
plane_state->bottom_up = true;
|
|
else
|
|
plane_state->bottom_up = false;
|
|
|
|
/*
|
|
* Tegra doesn't support different strides for U and V planes so we
|
|
* error out if the user tries to display a framebuffer with such a
|
|
* configuration.
|
|
*/
|
|
if (state->fb->format->num_planes > 2) {
|
|
if (state->fb->pitches[2] != state->fb->pitches[1]) {
|
|
DRM_ERROR("unsupported UV-plane configuration\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
err = tegra_plane_state_add(tegra, state);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tegra_plane_atomic_disable(struct drm_plane *plane,
|
|
struct drm_plane_state *old_state)
|
|
{
|
|
struct tegra_plane *p = to_tegra_plane(plane);
|
|
u32 value;
|
|
|
|
/* rien ne va plus */
|
|
if (!old_state || !old_state->crtc)
|
|
return;
|
|
|
|
value = tegra_plane_readl(p, DC_WIN_WIN_OPTIONS);
|
|
value &= ~WIN_ENABLE;
|
|
tegra_plane_writel(p, value, DC_WIN_WIN_OPTIONS);
|
|
}
|
|
|
|
static void tegra_plane_atomic_update(struct drm_plane *plane,
|
|
struct drm_plane_state *old_state)
|
|
{
|
|
struct tegra_plane_state *state = to_tegra_plane_state(plane->state);
|
|
struct drm_framebuffer *fb = plane->state->fb;
|
|
struct tegra_plane *p = to_tegra_plane(plane);
|
|
struct tegra_dc_window window;
|
|
unsigned int i;
|
|
|
|
/* rien ne va plus */
|
|
if (!plane->state->crtc || !plane->state->fb)
|
|
return;
|
|
|
|
if (!plane->state->visible)
|
|
return tegra_plane_atomic_disable(plane, old_state);
|
|
|
|
memset(&window, 0, sizeof(window));
|
|
window.src.x = plane->state->src.x1 >> 16;
|
|
window.src.y = plane->state->src.y1 >> 16;
|
|
window.src.w = drm_rect_width(&plane->state->src) >> 16;
|
|
window.src.h = drm_rect_height(&plane->state->src) >> 16;
|
|
window.dst.x = plane->state->dst.x1;
|
|
window.dst.y = plane->state->dst.y1;
|
|
window.dst.w = drm_rect_width(&plane->state->dst);
|
|
window.dst.h = drm_rect_height(&plane->state->dst);
|
|
window.bits_per_pixel = fb->format->cpp[0] * 8;
|
|
window.bottom_up = tegra_fb_is_bottom_up(fb) || state->bottom_up;
|
|
|
|
/* copy from state */
|
|
window.zpos = plane->state->normalized_zpos;
|
|
window.tiling = state->tiling;
|
|
window.format = state->format;
|
|
window.swap = state->swap;
|
|
|
|
for (i = 0; i < fb->format->num_planes; i++) {
|
|
struct tegra_bo *bo = tegra_fb_get_plane(fb, i);
|
|
|
|
window.base[i] = bo->paddr + fb->offsets[i];
|
|
|
|
/*
|
|
* Tegra uses a shared stride for UV planes. Framebuffers are
|
|
* already checked for this in the tegra_plane_atomic_check()
|
|
* function, so it's safe to ignore the V-plane pitch here.
|
|
*/
|
|
if (i < 2)
|
|
window.stride[i] = fb->pitches[i];
|
|
}
|
|
|
|
tegra_dc_setup_window(p, &window);
|
|
}
|
|
|
|
static const struct drm_plane_helper_funcs tegra_plane_helper_funcs = {
|
|
.atomic_check = tegra_plane_atomic_check,
|
|
.atomic_disable = tegra_plane_atomic_disable,
|
|
.atomic_update = tegra_plane_atomic_update,
|
|
};
|
|
|
|
static unsigned long tegra_plane_get_possible_crtcs(struct drm_device *drm)
|
|
{
|
|
/*
|
|
* Ideally this would use drm_crtc_mask(), but that would require the
|
|
* CRTC to already be in the mode_config's list of CRTCs. However, it
|
|
* will only be added to that list in the drm_crtc_init_with_planes()
|
|
* (in tegra_dc_init()), which in turn requires registration of these
|
|
* planes. So we have ourselves a nice little chicken and egg problem
|
|
* here.
|
|
*
|
|
* We work around this by manually creating the mask from the number
|
|
* of CRTCs that have been registered, and should therefore always be
|
|
* the same as drm_crtc_index() after registration.
|
|
*/
|
|
return 1 << drm->mode_config.num_crtc;
|
|
}
|
|
|
|
static struct drm_plane *tegra_primary_plane_create(struct drm_device *drm,
|
|
struct tegra_dc *dc)
|
|
{
|
|
unsigned long possible_crtcs = tegra_plane_get_possible_crtcs(drm);
|
|
enum drm_plane_type type = DRM_PLANE_TYPE_PRIMARY;
|
|
struct tegra_plane *plane;
|
|
unsigned int num_formats;
|
|
const u64 *modifiers;
|
|
const u32 *formats;
|
|
int err;
|
|
|
|
plane = kzalloc(sizeof(*plane), GFP_KERNEL);
|
|
if (!plane)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
/* Always use window A as primary window */
|
|
plane->offset = 0xa00;
|
|
plane->index = 0;
|
|
plane->dc = dc;
|
|
|
|
num_formats = dc->soc->num_primary_formats;
|
|
formats = dc->soc->primary_formats;
|
|
modifiers = dc->soc->modifiers;
|
|
|
|
err = drm_universal_plane_init(drm, &plane->base, possible_crtcs,
|
|
&tegra_plane_funcs, formats,
|
|
num_formats, modifiers, type, NULL);
|
|
if (err < 0) {
|
|
kfree(plane);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
drm_plane_helper_add(&plane->base, &tegra_plane_helper_funcs);
|
|
drm_plane_create_zpos_property(&plane->base, plane->index, 0, 255);
|
|
|
|
err = drm_plane_create_rotation_property(&plane->base,
|
|
DRM_MODE_ROTATE_0,
|
|
DRM_MODE_ROTATE_0 |
|
|
DRM_MODE_REFLECT_Y);
|
|
if (err < 0)
|
|
dev_err(dc->dev, "failed to create rotation property: %d\n",
|
|
err);
|
|
|
|
return &plane->base;
|
|
}
|
|
|
|
static const u32 tegra_cursor_plane_formats[] = {
|
|
DRM_FORMAT_RGBA8888,
|
|
};
|
|
|
|
static int tegra_cursor_atomic_check(struct drm_plane *plane,
|
|
struct drm_plane_state *state)
|
|
{
|
|
struct tegra_plane *tegra = to_tegra_plane(plane);
|
|
int err;
|
|
|
|
/* no need for further checks if the plane is being disabled */
|
|
if (!state->crtc)
|
|
return 0;
|
|
|
|
/* scaling not supported for cursor */
|
|
if ((state->src_w >> 16 != state->crtc_w) ||
|
|
(state->src_h >> 16 != state->crtc_h))
|
|
return -EINVAL;
|
|
|
|
/* only square cursors supported */
|
|
if (state->src_w != state->src_h)
|
|
return -EINVAL;
|
|
|
|
if (state->crtc_w != 32 && state->crtc_w != 64 &&
|
|
state->crtc_w != 128 && state->crtc_w != 256)
|
|
return -EINVAL;
|
|
|
|
err = tegra_plane_state_add(tegra, state);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tegra_cursor_atomic_update(struct drm_plane *plane,
|
|
struct drm_plane_state *old_state)
|
|
{
|
|
struct tegra_bo *bo = tegra_fb_get_plane(plane->state->fb, 0);
|
|
struct tegra_dc *dc = to_tegra_dc(plane->state->crtc);
|
|
struct drm_plane_state *state = plane->state;
|
|
u32 value = CURSOR_CLIP_DISPLAY;
|
|
|
|
/* rien ne va plus */
|
|
if (!plane->state->crtc || !plane->state->fb)
|
|
return;
|
|
|
|
switch (state->crtc_w) {
|
|
case 32:
|
|
value |= CURSOR_SIZE_32x32;
|
|
break;
|
|
|
|
case 64:
|
|
value |= CURSOR_SIZE_64x64;
|
|
break;
|
|
|
|
case 128:
|
|
value |= CURSOR_SIZE_128x128;
|
|
break;
|
|
|
|
case 256:
|
|
value |= CURSOR_SIZE_256x256;
|
|
break;
|
|
|
|
default:
|
|
WARN(1, "cursor size %ux%u not supported\n", state->crtc_w,
|
|
state->crtc_h);
|
|
return;
|
|
}
|
|
|
|
value |= (bo->paddr >> 10) & 0x3fffff;
|
|
tegra_dc_writel(dc, value, DC_DISP_CURSOR_START_ADDR);
|
|
|
|
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
|
|
value = (bo->paddr >> 32) & 0x3;
|
|
tegra_dc_writel(dc, value, DC_DISP_CURSOR_START_ADDR_HI);
|
|
#endif
|
|
|
|
/* enable cursor and set blend mode */
|
|
value = tegra_dc_readl(dc, DC_DISP_DISP_WIN_OPTIONS);
|
|
value |= CURSOR_ENABLE;
|
|
tegra_dc_writel(dc, value, DC_DISP_DISP_WIN_OPTIONS);
|
|
|
|
value = tegra_dc_readl(dc, DC_DISP_BLEND_CURSOR_CONTROL);
|
|
value &= ~CURSOR_DST_BLEND_MASK;
|
|
value &= ~CURSOR_SRC_BLEND_MASK;
|
|
value |= CURSOR_MODE_NORMAL;
|
|
value |= CURSOR_DST_BLEND_NEG_K1_TIMES_SRC;
|
|
value |= CURSOR_SRC_BLEND_K1_TIMES_SRC;
|
|
value |= CURSOR_ALPHA;
|
|
tegra_dc_writel(dc, value, DC_DISP_BLEND_CURSOR_CONTROL);
|
|
|
|
/* position the cursor */
|
|
value = (state->crtc_y & 0x3fff) << 16 | (state->crtc_x & 0x3fff);
|
|
tegra_dc_writel(dc, value, DC_DISP_CURSOR_POSITION);
|
|
}
|
|
|
|
static void tegra_cursor_atomic_disable(struct drm_plane *plane,
|
|
struct drm_plane_state *old_state)
|
|
{
|
|
struct tegra_dc *dc;
|
|
u32 value;
|
|
|
|
/* rien ne va plus */
|
|
if (!old_state || !old_state->crtc)
|
|
return;
|
|
|
|
dc = to_tegra_dc(old_state->crtc);
|
|
|
|
value = tegra_dc_readl(dc, DC_DISP_DISP_WIN_OPTIONS);
|
|
value &= ~CURSOR_ENABLE;
|
|
tegra_dc_writel(dc, value, DC_DISP_DISP_WIN_OPTIONS);
|
|
}
|
|
|
|
static const struct drm_plane_helper_funcs tegra_cursor_plane_helper_funcs = {
|
|
.atomic_check = tegra_cursor_atomic_check,
|
|
.atomic_update = tegra_cursor_atomic_update,
|
|
.atomic_disable = tegra_cursor_atomic_disable,
|
|
};
|
|
|
|
static struct drm_plane *tegra_dc_cursor_plane_create(struct drm_device *drm,
|
|
struct tegra_dc *dc)
|
|
{
|
|
unsigned long possible_crtcs = tegra_plane_get_possible_crtcs(drm);
|
|
struct tegra_plane *plane;
|
|
unsigned int num_formats;
|
|
const u32 *formats;
|
|
int err;
|
|
|
|
plane = kzalloc(sizeof(*plane), GFP_KERNEL);
|
|
if (!plane)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
/*
|
|
* This index is kind of fake. The cursor isn't a regular plane, but
|
|
* its update and activation request bits in DC_CMD_STATE_CONTROL do
|
|
* use the same programming. Setting this fake index here allows the
|
|
* code in tegra_add_plane_state() to do the right thing without the
|
|
* need to special-casing the cursor plane.
|
|
*/
|
|
plane->index = 6;
|
|
plane->dc = dc;
|
|
|
|
num_formats = ARRAY_SIZE(tegra_cursor_plane_formats);
|
|
formats = tegra_cursor_plane_formats;
|
|
|
|
err = drm_universal_plane_init(drm, &plane->base, possible_crtcs,
|
|
&tegra_plane_funcs, formats,
|
|
num_formats, NULL,
|
|
DRM_PLANE_TYPE_CURSOR, NULL);
|
|
if (err < 0) {
|
|
kfree(plane);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
drm_plane_helper_add(&plane->base, &tegra_cursor_plane_helper_funcs);
|
|
|
|
return &plane->base;
|
|
}
|
|
|
|
static const u32 tegra20_overlay_formats[] = {
|
|
DRM_FORMAT_ARGB4444,
|
|
DRM_FORMAT_ARGB1555,
|
|
DRM_FORMAT_RGB565,
|
|
DRM_FORMAT_RGBA5551,
|
|
DRM_FORMAT_ABGR8888,
|
|
DRM_FORMAT_ARGB8888,
|
|
/* non-native formats */
|
|
DRM_FORMAT_XRGB1555,
|
|
DRM_FORMAT_RGBX5551,
|
|
DRM_FORMAT_XBGR8888,
|
|
DRM_FORMAT_XRGB8888,
|
|
/* planar formats */
|
|
DRM_FORMAT_UYVY,
|
|
DRM_FORMAT_YUYV,
|
|
DRM_FORMAT_YUV420,
|
|
DRM_FORMAT_YUV422,
|
|
};
|
|
|
|
static const u32 tegra114_overlay_formats[] = {
|
|
DRM_FORMAT_ARGB4444,
|
|
DRM_FORMAT_ARGB1555,
|
|
DRM_FORMAT_RGB565,
|
|
DRM_FORMAT_RGBA5551,
|
|
DRM_FORMAT_ABGR8888,
|
|
DRM_FORMAT_ARGB8888,
|
|
/* new on Tegra114 */
|
|
DRM_FORMAT_ABGR4444,
|
|
DRM_FORMAT_ABGR1555,
|
|
DRM_FORMAT_BGRA5551,
|
|
DRM_FORMAT_XRGB1555,
|
|
DRM_FORMAT_RGBX5551,
|
|
DRM_FORMAT_XBGR1555,
|
|
DRM_FORMAT_BGRX5551,
|
|
DRM_FORMAT_BGR565,
|
|
DRM_FORMAT_BGRA8888,
|
|
DRM_FORMAT_RGBA8888,
|
|
DRM_FORMAT_XRGB8888,
|
|
DRM_FORMAT_XBGR8888,
|
|
/* planar formats */
|
|
DRM_FORMAT_UYVY,
|
|
DRM_FORMAT_YUYV,
|
|
DRM_FORMAT_YUV420,
|
|
DRM_FORMAT_YUV422,
|
|
};
|
|
|
|
static const u32 tegra124_overlay_formats[] = {
|
|
DRM_FORMAT_ARGB4444,
|
|
DRM_FORMAT_ARGB1555,
|
|
DRM_FORMAT_RGB565,
|
|
DRM_FORMAT_RGBA5551,
|
|
DRM_FORMAT_ABGR8888,
|
|
DRM_FORMAT_ARGB8888,
|
|
/* new on Tegra114 */
|
|
DRM_FORMAT_ABGR4444,
|
|
DRM_FORMAT_ABGR1555,
|
|
DRM_FORMAT_BGRA5551,
|
|
DRM_FORMAT_XRGB1555,
|
|
DRM_FORMAT_RGBX5551,
|
|
DRM_FORMAT_XBGR1555,
|
|
DRM_FORMAT_BGRX5551,
|
|
DRM_FORMAT_BGR565,
|
|
DRM_FORMAT_BGRA8888,
|
|
DRM_FORMAT_RGBA8888,
|
|
DRM_FORMAT_XRGB8888,
|
|
DRM_FORMAT_XBGR8888,
|
|
/* new on Tegra124 */
|
|
DRM_FORMAT_RGBX8888,
|
|
DRM_FORMAT_BGRX8888,
|
|
/* planar formats */
|
|
DRM_FORMAT_UYVY,
|
|
DRM_FORMAT_YUYV,
|
|
DRM_FORMAT_YUV420,
|
|
DRM_FORMAT_YUV422,
|
|
};
|
|
|
|
static struct drm_plane *tegra_dc_overlay_plane_create(struct drm_device *drm,
|
|
struct tegra_dc *dc,
|
|
unsigned int index,
|
|
bool cursor)
|
|
{
|
|
unsigned long possible_crtcs = tegra_plane_get_possible_crtcs(drm);
|
|
struct tegra_plane *plane;
|
|
unsigned int num_formats;
|
|
enum drm_plane_type type;
|
|
const u32 *formats;
|
|
int err;
|
|
|
|
plane = kzalloc(sizeof(*plane), GFP_KERNEL);
|
|
if (!plane)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
plane->offset = 0xa00 + 0x200 * index;
|
|
plane->index = index;
|
|
plane->dc = dc;
|
|
|
|
num_formats = dc->soc->num_overlay_formats;
|
|
formats = dc->soc->overlay_formats;
|
|
|
|
if (!cursor)
|
|
type = DRM_PLANE_TYPE_OVERLAY;
|
|
else
|
|
type = DRM_PLANE_TYPE_CURSOR;
|
|
|
|
err = drm_universal_plane_init(drm, &plane->base, possible_crtcs,
|
|
&tegra_plane_funcs, formats,
|
|
num_formats, NULL, type, NULL);
|
|
if (err < 0) {
|
|
kfree(plane);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
drm_plane_helper_add(&plane->base, &tegra_plane_helper_funcs);
|
|
drm_plane_create_zpos_property(&plane->base, plane->index, 0, 255);
|
|
|
|
err = drm_plane_create_rotation_property(&plane->base,
|
|
DRM_MODE_ROTATE_0,
|
|
DRM_MODE_ROTATE_0 |
|
|
DRM_MODE_REFLECT_Y);
|
|
if (err < 0)
|
|
dev_err(dc->dev, "failed to create rotation property: %d\n",
|
|
err);
|
|
|
|
return &plane->base;
|
|
}
|
|
|
|
static struct drm_plane *tegra_dc_add_shared_planes(struct drm_device *drm,
|
|
struct tegra_dc *dc)
|
|
{
|
|
struct drm_plane *plane, *primary = NULL;
|
|
unsigned int i, j;
|
|
|
|
for (i = 0; i < dc->soc->num_wgrps; i++) {
|
|
const struct tegra_windowgroup_soc *wgrp = &dc->soc->wgrps[i];
|
|
|
|
if (wgrp->dc == dc->pipe) {
|
|
for (j = 0; j < wgrp->num_windows; j++) {
|
|
unsigned int index = wgrp->windows[j];
|
|
|
|
plane = tegra_shared_plane_create(drm, dc,
|
|
wgrp->index,
|
|
index);
|
|
if (IS_ERR(plane))
|
|
return plane;
|
|
|
|
/*
|
|
* Choose the first shared plane owned by this
|
|
* head as the primary plane.
|
|
*/
|
|
if (!primary) {
|
|
plane->type = DRM_PLANE_TYPE_PRIMARY;
|
|
primary = plane;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
return primary;
|
|
}
|
|
|
|
static struct drm_plane *tegra_dc_add_planes(struct drm_device *drm,
|
|
struct tegra_dc *dc)
|
|
{
|
|
struct drm_plane *planes[2], *primary;
|
|
unsigned int planes_num;
|
|
unsigned int i;
|
|
int err;
|
|
|
|
primary = tegra_primary_plane_create(drm, dc);
|
|
if (IS_ERR(primary))
|
|
return primary;
|
|
|
|
if (dc->soc->supports_cursor)
|
|
planes_num = 2;
|
|
else
|
|
planes_num = 1;
|
|
|
|
for (i = 0; i < planes_num; i++) {
|
|
planes[i] = tegra_dc_overlay_plane_create(drm, dc, 1 + i,
|
|
false);
|
|
if (IS_ERR(planes[i])) {
|
|
err = PTR_ERR(planes[i]);
|
|
|
|
while (i--)
|
|
tegra_plane_funcs.destroy(planes[i]);
|
|
|
|
tegra_plane_funcs.destroy(primary);
|
|
return ERR_PTR(err);
|
|
}
|
|
}
|
|
|
|
return primary;
|
|
}
|
|
|
|
static void tegra_dc_destroy(struct drm_crtc *crtc)
|
|
{
|
|
drm_crtc_cleanup(crtc);
|
|
}
|
|
|
|
static void tegra_crtc_reset(struct drm_crtc *crtc)
|
|
{
|
|
struct tegra_dc_state *state;
|
|
|
|
if (crtc->state)
|
|
__drm_atomic_helper_crtc_destroy_state(crtc->state);
|
|
|
|
kfree(crtc->state);
|
|
crtc->state = NULL;
|
|
|
|
state = kzalloc(sizeof(*state), GFP_KERNEL);
|
|
if (state) {
|
|
crtc->state = &state->base;
|
|
crtc->state->crtc = crtc;
|
|
}
|
|
|
|
drm_crtc_vblank_reset(crtc);
|
|
}
|
|
|
|
static struct drm_crtc_state *
|
|
tegra_crtc_atomic_duplicate_state(struct drm_crtc *crtc)
|
|
{
|
|
struct tegra_dc_state *state = to_dc_state(crtc->state);
|
|
struct tegra_dc_state *copy;
|
|
|
|
copy = kmalloc(sizeof(*copy), GFP_KERNEL);
|
|
if (!copy)
|
|
return NULL;
|
|
|
|
__drm_atomic_helper_crtc_duplicate_state(crtc, ©->base);
|
|
copy->clk = state->clk;
|
|
copy->pclk = state->pclk;
|
|
copy->div = state->div;
|
|
copy->planes = state->planes;
|
|
|
|
return ©->base;
|
|
}
|
|
|
|
static void tegra_crtc_atomic_destroy_state(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *state)
|
|
{
|
|
__drm_atomic_helper_crtc_destroy_state(state);
|
|
kfree(state);
|
|
}
|
|
|
|
#define DEBUGFS_REG32(_name) { .name = #_name, .offset = _name }
|
|
|
|
static const struct debugfs_reg32 tegra_dc_regs[] = {
|
|
DEBUGFS_REG32(DC_CMD_GENERAL_INCR_SYNCPT),
|
|
DEBUGFS_REG32(DC_CMD_GENERAL_INCR_SYNCPT_CNTRL),
|
|
DEBUGFS_REG32(DC_CMD_GENERAL_INCR_SYNCPT_ERROR),
|
|
DEBUGFS_REG32(DC_CMD_WIN_A_INCR_SYNCPT),
|
|
DEBUGFS_REG32(DC_CMD_WIN_A_INCR_SYNCPT_CNTRL),
|
|
DEBUGFS_REG32(DC_CMD_WIN_A_INCR_SYNCPT_ERROR),
|
|
DEBUGFS_REG32(DC_CMD_WIN_B_INCR_SYNCPT),
|
|
DEBUGFS_REG32(DC_CMD_WIN_B_INCR_SYNCPT_CNTRL),
|
|
DEBUGFS_REG32(DC_CMD_WIN_B_INCR_SYNCPT_ERROR),
|
|
DEBUGFS_REG32(DC_CMD_WIN_C_INCR_SYNCPT),
|
|
DEBUGFS_REG32(DC_CMD_WIN_C_INCR_SYNCPT_CNTRL),
|
|
DEBUGFS_REG32(DC_CMD_WIN_C_INCR_SYNCPT_ERROR),
|
|
DEBUGFS_REG32(DC_CMD_CONT_SYNCPT_VSYNC),
|
|
DEBUGFS_REG32(DC_CMD_DISPLAY_COMMAND_OPTION0),
|
|
DEBUGFS_REG32(DC_CMD_DISPLAY_COMMAND),
|
|
DEBUGFS_REG32(DC_CMD_SIGNAL_RAISE),
|
|
DEBUGFS_REG32(DC_CMD_DISPLAY_POWER_CONTROL),
|
|
DEBUGFS_REG32(DC_CMD_INT_STATUS),
|
|
DEBUGFS_REG32(DC_CMD_INT_MASK),
|
|
DEBUGFS_REG32(DC_CMD_INT_ENABLE),
|
|
DEBUGFS_REG32(DC_CMD_INT_TYPE),
|
|
DEBUGFS_REG32(DC_CMD_INT_POLARITY),
|
|
DEBUGFS_REG32(DC_CMD_SIGNAL_RAISE1),
|
|
DEBUGFS_REG32(DC_CMD_SIGNAL_RAISE2),
|
|
DEBUGFS_REG32(DC_CMD_SIGNAL_RAISE3),
|
|
DEBUGFS_REG32(DC_CMD_STATE_ACCESS),
|
|
DEBUGFS_REG32(DC_CMD_STATE_CONTROL),
|
|
DEBUGFS_REG32(DC_CMD_DISPLAY_WINDOW_HEADER),
|
|
DEBUGFS_REG32(DC_CMD_REG_ACT_CONTROL),
|
|
DEBUGFS_REG32(DC_COM_CRC_CONTROL),
|
|
DEBUGFS_REG32(DC_COM_CRC_CHECKSUM),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_ENABLE(0)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_ENABLE(1)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_ENABLE(2)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_ENABLE(3)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_POLARITY(0)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_POLARITY(1)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_POLARITY(2)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_POLARITY(3)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_DATA(0)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_DATA(1)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_DATA(2)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_DATA(3)),
|
|
DEBUGFS_REG32(DC_COM_PIN_INPUT_ENABLE(0)),
|
|
DEBUGFS_REG32(DC_COM_PIN_INPUT_ENABLE(1)),
|
|
DEBUGFS_REG32(DC_COM_PIN_INPUT_ENABLE(2)),
|
|
DEBUGFS_REG32(DC_COM_PIN_INPUT_ENABLE(3)),
|
|
DEBUGFS_REG32(DC_COM_PIN_INPUT_DATA(0)),
|
|
DEBUGFS_REG32(DC_COM_PIN_INPUT_DATA(1)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_SELECT(0)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_SELECT(1)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_SELECT(2)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_SELECT(3)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_SELECT(4)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_SELECT(5)),
|
|
DEBUGFS_REG32(DC_COM_PIN_OUTPUT_SELECT(6)),
|
|
DEBUGFS_REG32(DC_COM_PIN_MISC_CONTROL),
|
|
DEBUGFS_REG32(DC_COM_PIN_PM0_CONTROL),
|
|
DEBUGFS_REG32(DC_COM_PIN_PM0_DUTY_CYCLE),
|
|
DEBUGFS_REG32(DC_COM_PIN_PM1_CONTROL),
|
|
DEBUGFS_REG32(DC_COM_PIN_PM1_DUTY_CYCLE),
|
|
DEBUGFS_REG32(DC_COM_SPI_CONTROL),
|
|
DEBUGFS_REG32(DC_COM_SPI_START_BYTE),
|
|
DEBUGFS_REG32(DC_COM_HSPI_WRITE_DATA_AB),
|
|
DEBUGFS_REG32(DC_COM_HSPI_WRITE_DATA_CD),
|
|
DEBUGFS_REG32(DC_COM_HSPI_CS_DC),
|
|
DEBUGFS_REG32(DC_COM_SCRATCH_REGISTER_A),
|
|
DEBUGFS_REG32(DC_COM_SCRATCH_REGISTER_B),
|
|
DEBUGFS_REG32(DC_COM_GPIO_CTRL),
|
|
DEBUGFS_REG32(DC_COM_GPIO_DEBOUNCE_COUNTER),
|
|
DEBUGFS_REG32(DC_COM_CRC_CHECKSUM_LATCHED),
|
|
DEBUGFS_REG32(DC_DISP_DISP_SIGNAL_OPTIONS0),
|
|
DEBUGFS_REG32(DC_DISP_DISP_SIGNAL_OPTIONS1),
|
|
DEBUGFS_REG32(DC_DISP_DISP_WIN_OPTIONS),
|
|
DEBUGFS_REG32(DC_DISP_DISP_MEM_HIGH_PRIORITY),
|
|
DEBUGFS_REG32(DC_DISP_DISP_MEM_HIGH_PRIORITY_TIMER),
|
|
DEBUGFS_REG32(DC_DISP_DISP_TIMING_OPTIONS),
|
|
DEBUGFS_REG32(DC_DISP_REF_TO_SYNC),
|
|
DEBUGFS_REG32(DC_DISP_SYNC_WIDTH),
|
|
DEBUGFS_REG32(DC_DISP_BACK_PORCH),
|
|
DEBUGFS_REG32(DC_DISP_ACTIVE),
|
|
DEBUGFS_REG32(DC_DISP_FRONT_PORCH),
|
|
DEBUGFS_REG32(DC_DISP_H_PULSE0_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_H_PULSE0_POSITION_A),
|
|
DEBUGFS_REG32(DC_DISP_H_PULSE0_POSITION_B),
|
|
DEBUGFS_REG32(DC_DISP_H_PULSE0_POSITION_C),
|
|
DEBUGFS_REG32(DC_DISP_H_PULSE0_POSITION_D),
|
|
DEBUGFS_REG32(DC_DISP_H_PULSE1_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_H_PULSE1_POSITION_A),
|
|
DEBUGFS_REG32(DC_DISP_H_PULSE1_POSITION_B),
|
|
DEBUGFS_REG32(DC_DISP_H_PULSE1_POSITION_C),
|
|
DEBUGFS_REG32(DC_DISP_H_PULSE1_POSITION_D),
|
|
DEBUGFS_REG32(DC_DISP_H_PULSE2_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_H_PULSE2_POSITION_A),
|
|
DEBUGFS_REG32(DC_DISP_H_PULSE2_POSITION_B),
|
|
DEBUGFS_REG32(DC_DISP_H_PULSE2_POSITION_C),
|
|
DEBUGFS_REG32(DC_DISP_H_PULSE2_POSITION_D),
|
|
DEBUGFS_REG32(DC_DISP_V_PULSE0_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_V_PULSE0_POSITION_A),
|
|
DEBUGFS_REG32(DC_DISP_V_PULSE0_POSITION_B),
|
|
DEBUGFS_REG32(DC_DISP_V_PULSE0_POSITION_C),
|
|
DEBUGFS_REG32(DC_DISP_V_PULSE1_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_V_PULSE1_POSITION_A),
|
|
DEBUGFS_REG32(DC_DISP_V_PULSE1_POSITION_B),
|
|
DEBUGFS_REG32(DC_DISP_V_PULSE1_POSITION_C),
|
|
DEBUGFS_REG32(DC_DISP_V_PULSE2_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_V_PULSE2_POSITION_A),
|
|
DEBUGFS_REG32(DC_DISP_V_PULSE3_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_V_PULSE3_POSITION_A),
|
|
DEBUGFS_REG32(DC_DISP_M0_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_M1_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_DI_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_PP_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_PP_SELECT_A),
|
|
DEBUGFS_REG32(DC_DISP_PP_SELECT_B),
|
|
DEBUGFS_REG32(DC_DISP_PP_SELECT_C),
|
|
DEBUGFS_REG32(DC_DISP_PP_SELECT_D),
|
|
DEBUGFS_REG32(DC_DISP_DISP_CLOCK_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_DISP_INTERFACE_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_DISP_COLOR_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_SHIFT_CLOCK_OPTIONS),
|
|
DEBUGFS_REG32(DC_DISP_DATA_ENABLE_OPTIONS),
|
|
DEBUGFS_REG32(DC_DISP_SERIAL_INTERFACE_OPTIONS),
|
|
DEBUGFS_REG32(DC_DISP_LCD_SPI_OPTIONS),
|
|
DEBUGFS_REG32(DC_DISP_BORDER_COLOR),
|
|
DEBUGFS_REG32(DC_DISP_COLOR_KEY0_LOWER),
|
|
DEBUGFS_REG32(DC_DISP_COLOR_KEY0_UPPER),
|
|
DEBUGFS_REG32(DC_DISP_COLOR_KEY1_LOWER),
|
|
DEBUGFS_REG32(DC_DISP_COLOR_KEY1_UPPER),
|
|
DEBUGFS_REG32(DC_DISP_CURSOR_FOREGROUND),
|
|
DEBUGFS_REG32(DC_DISP_CURSOR_BACKGROUND),
|
|
DEBUGFS_REG32(DC_DISP_CURSOR_START_ADDR),
|
|
DEBUGFS_REG32(DC_DISP_CURSOR_START_ADDR_NS),
|
|
DEBUGFS_REG32(DC_DISP_CURSOR_POSITION),
|
|
DEBUGFS_REG32(DC_DISP_CURSOR_POSITION_NS),
|
|
DEBUGFS_REG32(DC_DISP_INIT_SEQ_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_SPI_INIT_SEQ_DATA_A),
|
|
DEBUGFS_REG32(DC_DISP_SPI_INIT_SEQ_DATA_B),
|
|
DEBUGFS_REG32(DC_DISP_SPI_INIT_SEQ_DATA_C),
|
|
DEBUGFS_REG32(DC_DISP_SPI_INIT_SEQ_DATA_D),
|
|
DEBUGFS_REG32(DC_DISP_DC_MCCIF_FIFOCTRL),
|
|
DEBUGFS_REG32(DC_DISP_MCCIF_DISPLAY0A_HYST),
|
|
DEBUGFS_REG32(DC_DISP_MCCIF_DISPLAY0B_HYST),
|
|
DEBUGFS_REG32(DC_DISP_MCCIF_DISPLAY1A_HYST),
|
|
DEBUGFS_REG32(DC_DISP_MCCIF_DISPLAY1B_HYST),
|
|
DEBUGFS_REG32(DC_DISP_DAC_CRT_CTRL),
|
|
DEBUGFS_REG32(DC_DISP_DISP_MISC_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_SD_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_SD_CSC_COEFF),
|
|
DEBUGFS_REG32(DC_DISP_SD_LUT(0)),
|
|
DEBUGFS_REG32(DC_DISP_SD_LUT(1)),
|
|
DEBUGFS_REG32(DC_DISP_SD_LUT(2)),
|
|
DEBUGFS_REG32(DC_DISP_SD_LUT(3)),
|
|
DEBUGFS_REG32(DC_DISP_SD_LUT(4)),
|
|
DEBUGFS_REG32(DC_DISP_SD_LUT(5)),
|
|
DEBUGFS_REG32(DC_DISP_SD_LUT(6)),
|
|
DEBUGFS_REG32(DC_DISP_SD_LUT(7)),
|
|
DEBUGFS_REG32(DC_DISP_SD_LUT(8)),
|
|
DEBUGFS_REG32(DC_DISP_SD_FLICKER_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_DC_PIXEL_COUNT),
|
|
DEBUGFS_REG32(DC_DISP_SD_HISTOGRAM(0)),
|
|
DEBUGFS_REG32(DC_DISP_SD_HISTOGRAM(1)),
|
|
DEBUGFS_REG32(DC_DISP_SD_HISTOGRAM(2)),
|
|
DEBUGFS_REG32(DC_DISP_SD_HISTOGRAM(3)),
|
|
DEBUGFS_REG32(DC_DISP_SD_HISTOGRAM(4)),
|
|
DEBUGFS_REG32(DC_DISP_SD_HISTOGRAM(5)),
|
|
DEBUGFS_REG32(DC_DISP_SD_HISTOGRAM(6)),
|
|
DEBUGFS_REG32(DC_DISP_SD_HISTOGRAM(7)),
|
|
DEBUGFS_REG32(DC_DISP_SD_BL_TF(0)),
|
|
DEBUGFS_REG32(DC_DISP_SD_BL_TF(1)),
|
|
DEBUGFS_REG32(DC_DISP_SD_BL_TF(2)),
|
|
DEBUGFS_REG32(DC_DISP_SD_BL_TF(3)),
|
|
DEBUGFS_REG32(DC_DISP_SD_BL_CONTROL),
|
|
DEBUGFS_REG32(DC_DISP_SD_HW_K_VALUES),
|
|
DEBUGFS_REG32(DC_DISP_SD_MAN_K_VALUES),
|
|
DEBUGFS_REG32(DC_DISP_CURSOR_START_ADDR_HI),
|
|
DEBUGFS_REG32(DC_DISP_BLEND_CURSOR_CONTROL),
|
|
DEBUGFS_REG32(DC_WIN_WIN_OPTIONS),
|
|
DEBUGFS_REG32(DC_WIN_BYTE_SWAP),
|
|
DEBUGFS_REG32(DC_WIN_BUFFER_CONTROL),
|
|
DEBUGFS_REG32(DC_WIN_COLOR_DEPTH),
|
|
DEBUGFS_REG32(DC_WIN_POSITION),
|
|
DEBUGFS_REG32(DC_WIN_SIZE),
|
|
DEBUGFS_REG32(DC_WIN_PRESCALED_SIZE),
|
|
DEBUGFS_REG32(DC_WIN_H_INITIAL_DDA),
|
|
DEBUGFS_REG32(DC_WIN_V_INITIAL_DDA),
|
|
DEBUGFS_REG32(DC_WIN_DDA_INC),
|
|
DEBUGFS_REG32(DC_WIN_LINE_STRIDE),
|
|
DEBUGFS_REG32(DC_WIN_BUF_STRIDE),
|
|
DEBUGFS_REG32(DC_WIN_UV_BUF_STRIDE),
|
|
DEBUGFS_REG32(DC_WIN_BUFFER_ADDR_MODE),
|
|
DEBUGFS_REG32(DC_WIN_DV_CONTROL),
|
|
DEBUGFS_REG32(DC_WIN_BLEND_NOKEY),
|
|
DEBUGFS_REG32(DC_WIN_BLEND_1WIN),
|
|
DEBUGFS_REG32(DC_WIN_BLEND_2WIN_X),
|
|
DEBUGFS_REG32(DC_WIN_BLEND_2WIN_Y),
|
|
DEBUGFS_REG32(DC_WIN_BLEND_3WIN_XY),
|
|
DEBUGFS_REG32(DC_WIN_HP_FETCH_CONTROL),
|
|
DEBUGFS_REG32(DC_WINBUF_START_ADDR),
|
|
DEBUGFS_REG32(DC_WINBUF_START_ADDR_NS),
|
|
DEBUGFS_REG32(DC_WINBUF_START_ADDR_U),
|
|
DEBUGFS_REG32(DC_WINBUF_START_ADDR_U_NS),
|
|
DEBUGFS_REG32(DC_WINBUF_START_ADDR_V),
|
|
DEBUGFS_REG32(DC_WINBUF_START_ADDR_V_NS),
|
|
DEBUGFS_REG32(DC_WINBUF_ADDR_H_OFFSET),
|
|
DEBUGFS_REG32(DC_WINBUF_ADDR_H_OFFSET_NS),
|
|
DEBUGFS_REG32(DC_WINBUF_ADDR_V_OFFSET),
|
|
DEBUGFS_REG32(DC_WINBUF_ADDR_V_OFFSET_NS),
|
|
DEBUGFS_REG32(DC_WINBUF_UFLOW_STATUS),
|
|
DEBUGFS_REG32(DC_WINBUF_AD_UFLOW_STATUS),
|
|
DEBUGFS_REG32(DC_WINBUF_BD_UFLOW_STATUS),
|
|
DEBUGFS_REG32(DC_WINBUF_CD_UFLOW_STATUS),
|
|
};
|
|
|
|
static int tegra_dc_show_regs(struct seq_file *s, void *data)
|
|
{
|
|
struct drm_info_node *node = s->private;
|
|
struct tegra_dc *dc = node->info_ent->data;
|
|
unsigned int i;
|
|
int err = 0;
|
|
|
|
drm_modeset_lock(&dc->base.mutex, NULL);
|
|
|
|
if (!dc->base.state->active) {
|
|
err = -EBUSY;
|
|
goto unlock;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(tegra_dc_regs); i++) {
|
|
unsigned int offset = tegra_dc_regs[i].offset;
|
|
|
|
seq_printf(s, "%-40s %#05x %08x\n", tegra_dc_regs[i].name,
|
|
offset, tegra_dc_readl(dc, offset));
|
|
}
|
|
|
|
unlock:
|
|
drm_modeset_unlock(&dc->base.mutex);
|
|
return err;
|
|
}
|
|
|
|
static int tegra_dc_show_crc(struct seq_file *s, void *data)
|
|
{
|
|
struct drm_info_node *node = s->private;
|
|
struct tegra_dc *dc = node->info_ent->data;
|
|
int err = 0;
|
|
u32 value;
|
|
|
|
drm_modeset_lock(&dc->base.mutex, NULL);
|
|
|
|
if (!dc->base.state->active) {
|
|
err = -EBUSY;
|
|
goto unlock;
|
|
}
|
|
|
|
value = DC_COM_CRC_CONTROL_ACTIVE_DATA | DC_COM_CRC_CONTROL_ENABLE;
|
|
tegra_dc_writel(dc, value, DC_COM_CRC_CONTROL);
|
|
tegra_dc_commit(dc);
|
|
|
|
drm_crtc_wait_one_vblank(&dc->base);
|
|
drm_crtc_wait_one_vblank(&dc->base);
|
|
|
|
value = tegra_dc_readl(dc, DC_COM_CRC_CHECKSUM);
|
|
seq_printf(s, "%08x\n", value);
|
|
|
|
tegra_dc_writel(dc, 0, DC_COM_CRC_CONTROL);
|
|
|
|
unlock:
|
|
drm_modeset_unlock(&dc->base.mutex);
|
|
return err;
|
|
}
|
|
|
|
static int tegra_dc_show_stats(struct seq_file *s, void *data)
|
|
{
|
|
struct drm_info_node *node = s->private;
|
|
struct tegra_dc *dc = node->info_ent->data;
|
|
|
|
seq_printf(s, "frames: %lu\n", dc->stats.frames);
|
|
seq_printf(s, "vblank: %lu\n", dc->stats.vblank);
|
|
seq_printf(s, "underflow: %lu\n", dc->stats.underflow);
|
|
seq_printf(s, "overflow: %lu\n", dc->stats.overflow);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct drm_info_list debugfs_files[] = {
|
|
{ "regs", tegra_dc_show_regs, 0, NULL },
|
|
{ "crc", tegra_dc_show_crc, 0, NULL },
|
|
{ "stats", tegra_dc_show_stats, 0, NULL },
|
|
};
|
|
|
|
static int tegra_dc_late_register(struct drm_crtc *crtc)
|
|
{
|
|
unsigned int i, count = ARRAY_SIZE(debugfs_files);
|
|
struct drm_minor *minor = crtc->dev->primary;
|
|
struct dentry *root;
|
|
struct tegra_dc *dc = to_tegra_dc(crtc);
|
|
int err;
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
root = crtc->debugfs_entry;
|
|
#else
|
|
root = NULL;
|
|
#endif
|
|
|
|
dc->debugfs_files = kmemdup(debugfs_files, sizeof(debugfs_files),
|
|
GFP_KERNEL);
|
|
if (!dc->debugfs_files)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < count; i++)
|
|
dc->debugfs_files[i].data = dc;
|
|
|
|
err = drm_debugfs_create_files(dc->debugfs_files, count, root, minor);
|
|
if (err < 0)
|
|
goto free;
|
|
|
|
return 0;
|
|
|
|
free:
|
|
kfree(dc->debugfs_files);
|
|
dc->debugfs_files = NULL;
|
|
|
|
return err;
|
|
}
|
|
|
|
static void tegra_dc_early_unregister(struct drm_crtc *crtc)
|
|
{
|
|
unsigned int count = ARRAY_SIZE(debugfs_files);
|
|
struct drm_minor *minor = crtc->dev->primary;
|
|
struct tegra_dc *dc = to_tegra_dc(crtc);
|
|
|
|
drm_debugfs_remove_files(dc->debugfs_files, count, minor);
|
|
kfree(dc->debugfs_files);
|
|
dc->debugfs_files = NULL;
|
|
}
|
|
|
|
static u32 tegra_dc_get_vblank_counter(struct drm_crtc *crtc)
|
|
{
|
|
struct tegra_dc *dc = to_tegra_dc(crtc);
|
|
|
|
/* XXX vblank syncpoints don't work with nvdisplay yet */
|
|
if (dc->syncpt && !dc->soc->has_nvdisplay)
|
|
return host1x_syncpt_read(dc->syncpt);
|
|
|
|
/* fallback to software emulated VBLANK counter */
|
|
return (u32)drm_crtc_vblank_count(&dc->base);
|
|
}
|
|
|
|
static int tegra_dc_enable_vblank(struct drm_crtc *crtc)
|
|
{
|
|
struct tegra_dc *dc = to_tegra_dc(crtc);
|
|
u32 value;
|
|
|
|
value = tegra_dc_readl(dc, DC_CMD_INT_MASK);
|
|
value |= VBLANK_INT;
|
|
tegra_dc_writel(dc, value, DC_CMD_INT_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tegra_dc_disable_vblank(struct drm_crtc *crtc)
|
|
{
|
|
struct tegra_dc *dc = to_tegra_dc(crtc);
|
|
u32 value;
|
|
|
|
value = tegra_dc_readl(dc, DC_CMD_INT_MASK);
|
|
value &= ~VBLANK_INT;
|
|
tegra_dc_writel(dc, value, DC_CMD_INT_MASK);
|
|
}
|
|
|
|
static const struct drm_crtc_funcs tegra_crtc_funcs = {
|
|
.page_flip = drm_atomic_helper_page_flip,
|
|
.set_config = drm_atomic_helper_set_config,
|
|
.destroy = tegra_dc_destroy,
|
|
.reset = tegra_crtc_reset,
|
|
.atomic_duplicate_state = tegra_crtc_atomic_duplicate_state,
|
|
.atomic_destroy_state = tegra_crtc_atomic_destroy_state,
|
|
.late_register = tegra_dc_late_register,
|
|
.early_unregister = tegra_dc_early_unregister,
|
|
.get_vblank_counter = tegra_dc_get_vblank_counter,
|
|
.enable_vblank = tegra_dc_enable_vblank,
|
|
.disable_vblank = tegra_dc_disable_vblank,
|
|
};
|
|
|
|
static int tegra_dc_set_timings(struct tegra_dc *dc,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
unsigned int h_ref_to_sync = 1;
|
|
unsigned int v_ref_to_sync = 1;
|
|
unsigned long value;
|
|
|
|
if (!dc->soc->has_nvdisplay) {
|
|
tegra_dc_writel(dc, 0x0, DC_DISP_DISP_TIMING_OPTIONS);
|
|
|
|
value = (v_ref_to_sync << 16) | h_ref_to_sync;
|
|
tegra_dc_writel(dc, value, DC_DISP_REF_TO_SYNC);
|
|
}
|
|
|
|
value = ((mode->vsync_end - mode->vsync_start) << 16) |
|
|
((mode->hsync_end - mode->hsync_start) << 0);
|
|
tegra_dc_writel(dc, value, DC_DISP_SYNC_WIDTH);
|
|
|
|
value = ((mode->vtotal - mode->vsync_end) << 16) |
|
|
((mode->htotal - mode->hsync_end) << 0);
|
|
tegra_dc_writel(dc, value, DC_DISP_BACK_PORCH);
|
|
|
|
value = ((mode->vsync_start - mode->vdisplay) << 16) |
|
|
((mode->hsync_start - mode->hdisplay) << 0);
|
|
tegra_dc_writel(dc, value, DC_DISP_FRONT_PORCH);
|
|
|
|
value = (mode->vdisplay << 16) | mode->hdisplay;
|
|
tegra_dc_writel(dc, value, DC_DISP_ACTIVE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tegra_dc_state_setup_clock - check clock settings and store them in atomic
|
|
* state
|
|
* @dc: display controller
|
|
* @crtc_state: CRTC atomic state
|
|
* @clk: parent clock for display controller
|
|
* @pclk: pixel clock
|
|
* @div: shift clock divider
|
|
*
|
|
* Returns:
|
|
* 0 on success or a negative error-code on failure.
|
|
*/
|
|
int tegra_dc_state_setup_clock(struct tegra_dc *dc,
|
|
struct drm_crtc_state *crtc_state,
|
|
struct clk *clk, unsigned long pclk,
|
|
unsigned int div)
|
|
{
|
|
struct tegra_dc_state *state = to_dc_state(crtc_state);
|
|
|
|
if (!clk_has_parent(dc->clk, clk))
|
|
return -EINVAL;
|
|
|
|
state->clk = clk;
|
|
state->pclk = pclk;
|
|
state->div = div;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tegra_dc_commit_state(struct tegra_dc *dc,
|
|
struct tegra_dc_state *state)
|
|
{
|
|
u32 value;
|
|
int err;
|
|
|
|
err = clk_set_parent(dc->clk, state->clk);
|
|
if (err < 0)
|
|
dev_err(dc->dev, "failed to set parent clock: %d\n", err);
|
|
|
|
/*
|
|
* Outputs may not want to change the parent clock rate. This is only
|
|
* relevant to Tegra20 where only a single display PLL is available.
|
|
* Since that PLL would typically be used for HDMI, an internal LVDS
|
|
* panel would need to be driven by some other clock such as PLL_P
|
|
* which is shared with other peripherals. Changing the clock rate
|
|
* should therefore be avoided.
|
|
*/
|
|
if (state->pclk > 0) {
|
|
err = clk_set_rate(state->clk, state->pclk);
|
|
if (err < 0)
|
|
dev_err(dc->dev,
|
|
"failed to set clock rate to %lu Hz\n",
|
|
state->pclk);
|
|
}
|
|
|
|
DRM_DEBUG_KMS("rate: %lu, div: %u\n", clk_get_rate(dc->clk),
|
|
state->div);
|
|
DRM_DEBUG_KMS("pclk: %lu\n", state->pclk);
|
|
|
|
if (!dc->soc->has_nvdisplay) {
|
|
value = SHIFT_CLK_DIVIDER(state->div) | PIXEL_CLK_DIVIDER_PCD1;
|
|
tegra_dc_writel(dc, value, DC_DISP_DISP_CLOCK_CONTROL);
|
|
}
|
|
|
|
err = clk_set_rate(dc->clk, state->pclk);
|
|
if (err < 0)
|
|
dev_err(dc->dev, "failed to set clock %pC to %lu Hz: %d\n",
|
|
dc->clk, state->pclk, err);
|
|
}
|
|
|
|
static void tegra_dc_stop(struct tegra_dc *dc)
|
|
{
|
|
u32 value;
|
|
|
|
/* stop the display controller */
|
|
value = tegra_dc_readl(dc, DC_CMD_DISPLAY_COMMAND);
|
|
value &= ~DISP_CTRL_MODE_MASK;
|
|
tegra_dc_writel(dc, value, DC_CMD_DISPLAY_COMMAND);
|
|
|
|
tegra_dc_commit(dc);
|
|
}
|
|
|
|
static bool tegra_dc_idle(struct tegra_dc *dc)
|
|
{
|
|
u32 value;
|
|
|
|
value = tegra_dc_readl_active(dc, DC_CMD_DISPLAY_COMMAND);
|
|
|
|
return (value & DISP_CTRL_MODE_MASK) == 0;
|
|
}
|
|
|
|
static int tegra_dc_wait_idle(struct tegra_dc *dc, unsigned long timeout)
|
|
{
|
|
timeout = jiffies + msecs_to_jiffies(timeout);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
if (tegra_dc_idle(dc))
|
|
return 0;
|
|
|
|
usleep_range(1000, 2000);
|
|
}
|
|
|
|
dev_dbg(dc->dev, "timeout waiting for DC to become idle\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void tegra_crtc_atomic_disable(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *old_state)
|
|
{
|
|
struct tegra_dc *dc = to_tegra_dc(crtc);
|
|
u32 value;
|
|
|
|
if (!tegra_dc_idle(dc)) {
|
|
tegra_dc_stop(dc);
|
|
|
|
/*
|
|
* Ignore the return value, there isn't anything useful to do
|
|
* in case this fails.
|
|
*/
|
|
tegra_dc_wait_idle(dc, 100);
|
|
}
|
|
|
|
/*
|
|
* This should really be part of the RGB encoder driver, but clearing
|
|
* these bits has the side-effect of stopping the display controller.
|
|
* When that happens no VBLANK interrupts will be raised. At the same
|
|
* time the encoder is disabled before the display controller, so the
|
|
* above code is always going to timeout waiting for the controller
|
|
* to go idle.
|
|
*
|
|
* Given the close coupling between the RGB encoder and the display
|
|
* controller doing it here is still kind of okay. None of the other
|
|
* encoder drivers require these bits to be cleared.
|
|
*
|
|
* XXX: Perhaps given that the display controller is switched off at
|
|
* this point anyway maybe clearing these bits isn't even useful for
|
|
* the RGB encoder?
|
|
*/
|
|
if (dc->rgb) {
|
|
value = tegra_dc_readl(dc, DC_CMD_DISPLAY_POWER_CONTROL);
|
|
value &= ~(PW0_ENABLE | PW1_ENABLE | PW2_ENABLE | PW3_ENABLE |
|
|
PW4_ENABLE | PM0_ENABLE | PM1_ENABLE);
|
|
tegra_dc_writel(dc, value, DC_CMD_DISPLAY_POWER_CONTROL);
|
|
}
|
|
|
|
tegra_dc_stats_reset(&dc->stats);
|
|
drm_crtc_vblank_off(crtc);
|
|
|
|
spin_lock_irq(&crtc->dev->event_lock);
|
|
|
|
if (crtc->state->event) {
|
|
drm_crtc_send_vblank_event(crtc, crtc->state->event);
|
|
crtc->state->event = NULL;
|
|
}
|
|
|
|
spin_unlock_irq(&crtc->dev->event_lock);
|
|
|
|
pm_runtime_put_sync(dc->dev);
|
|
}
|
|
|
|
static void tegra_crtc_atomic_enable(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *old_state)
|
|
{
|
|
struct drm_display_mode *mode = &crtc->state->adjusted_mode;
|
|
struct tegra_dc_state *state = to_dc_state(crtc->state);
|
|
struct tegra_dc *dc = to_tegra_dc(crtc);
|
|
u32 value;
|
|
|
|
pm_runtime_get_sync(dc->dev);
|
|
|
|
/* initialize display controller */
|
|
if (dc->syncpt) {
|
|
u32 syncpt = host1x_syncpt_id(dc->syncpt), enable;
|
|
|
|
if (dc->soc->has_nvdisplay)
|
|
enable = 1 << 31;
|
|
else
|
|
enable = 1 << 8;
|
|
|
|
value = SYNCPT_CNTRL_NO_STALL;
|
|
tegra_dc_writel(dc, value, DC_CMD_GENERAL_INCR_SYNCPT_CNTRL);
|
|
|
|
value = enable | syncpt;
|
|
tegra_dc_writel(dc, value, DC_CMD_CONT_SYNCPT_VSYNC);
|
|
}
|
|
|
|
if (dc->soc->has_nvdisplay) {
|
|
value = DSC_TO_UF_INT | DSC_BBUF_UF_INT | DSC_RBUF_UF_INT |
|
|
DSC_OBUF_UF_INT;
|
|
tegra_dc_writel(dc, value, DC_CMD_INT_TYPE);
|
|
|
|
value = DSC_TO_UF_INT | DSC_BBUF_UF_INT | DSC_RBUF_UF_INT |
|
|
DSC_OBUF_UF_INT | SD3_BUCKET_WALK_DONE_INT |
|
|
HEAD_UF_INT | MSF_INT | REG_TMOUT_INT |
|
|
REGION_CRC_INT | V_PULSE2_INT | V_PULSE3_INT |
|
|
VBLANK_INT | FRAME_END_INT;
|
|
tegra_dc_writel(dc, value, DC_CMD_INT_POLARITY);
|
|
|
|
value = SD3_BUCKET_WALK_DONE_INT | HEAD_UF_INT | VBLANK_INT |
|
|
FRAME_END_INT;
|
|
tegra_dc_writel(dc, value, DC_CMD_INT_ENABLE);
|
|
|
|
value = HEAD_UF_INT | REG_TMOUT_INT | FRAME_END_INT;
|
|
tegra_dc_writel(dc, value, DC_CMD_INT_MASK);
|
|
|
|
tegra_dc_writel(dc, READ_MUX, DC_CMD_STATE_ACCESS);
|
|
} else {
|
|
value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT |
|
|
WIN_A_OF_INT | WIN_B_OF_INT | WIN_C_OF_INT;
|
|
tegra_dc_writel(dc, value, DC_CMD_INT_TYPE);
|
|
|
|
value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT |
|
|
WIN_A_OF_INT | WIN_B_OF_INT | WIN_C_OF_INT;
|
|
tegra_dc_writel(dc, value, DC_CMD_INT_POLARITY);
|
|
|
|
/* initialize timer */
|
|
value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(0x20) |
|
|
WINDOW_B_THRESHOLD(0x20) | WINDOW_C_THRESHOLD(0x20);
|
|
tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY);
|
|
|
|
value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(1) |
|
|
WINDOW_B_THRESHOLD(1) | WINDOW_C_THRESHOLD(1);
|
|
tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY_TIMER);
|
|
|
|
value = VBLANK_INT | WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT |
|
|
WIN_A_OF_INT | WIN_B_OF_INT | WIN_C_OF_INT;
|
|
tegra_dc_writel(dc, value, DC_CMD_INT_ENABLE);
|
|
|
|
value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT |
|
|
WIN_A_OF_INT | WIN_B_OF_INT | WIN_C_OF_INT;
|
|
tegra_dc_writel(dc, value, DC_CMD_INT_MASK);
|
|
}
|
|
|
|
if (dc->soc->supports_background_color)
|
|
tegra_dc_writel(dc, 0, DC_DISP_BLEND_BACKGROUND_COLOR);
|
|
else
|
|
tegra_dc_writel(dc, 0, DC_DISP_BORDER_COLOR);
|
|
|
|
/* apply PLL and pixel clock changes */
|
|
tegra_dc_commit_state(dc, state);
|
|
|
|
/* program display mode */
|
|
tegra_dc_set_timings(dc, mode);
|
|
|
|
/* interlacing isn't supported yet, so disable it */
|
|
if (dc->soc->supports_interlacing) {
|
|
value = tegra_dc_readl(dc, DC_DISP_INTERLACE_CONTROL);
|
|
value &= ~INTERLACE_ENABLE;
|
|
tegra_dc_writel(dc, value, DC_DISP_INTERLACE_CONTROL);
|
|
}
|
|
|
|
value = tegra_dc_readl(dc, DC_CMD_DISPLAY_COMMAND);
|
|
value &= ~DISP_CTRL_MODE_MASK;
|
|
value |= DISP_CTRL_MODE_C_DISPLAY;
|
|
tegra_dc_writel(dc, value, DC_CMD_DISPLAY_COMMAND);
|
|
|
|
if (!dc->soc->has_nvdisplay) {
|
|
value = tegra_dc_readl(dc, DC_CMD_DISPLAY_POWER_CONTROL);
|
|
value |= PW0_ENABLE | PW1_ENABLE | PW2_ENABLE | PW3_ENABLE |
|
|
PW4_ENABLE | PM0_ENABLE | PM1_ENABLE;
|
|
tegra_dc_writel(dc, value, DC_CMD_DISPLAY_POWER_CONTROL);
|
|
}
|
|
|
|
/* enable underflow reporting and display red for missing pixels */
|
|
if (dc->soc->has_nvdisplay) {
|
|
value = UNDERFLOW_MODE_RED | UNDERFLOW_REPORT_ENABLE;
|
|
tegra_dc_writel(dc, value, DC_COM_RG_UNDERFLOW);
|
|
}
|
|
|
|
tegra_dc_commit(dc);
|
|
|
|
drm_crtc_vblank_on(crtc);
|
|
}
|
|
|
|
static void tegra_crtc_atomic_begin(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *old_crtc_state)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (crtc->state->event) {
|
|
spin_lock_irqsave(&crtc->dev->event_lock, flags);
|
|
|
|
if (drm_crtc_vblank_get(crtc) != 0)
|
|
drm_crtc_send_vblank_event(crtc, crtc->state->event);
|
|
else
|
|
drm_crtc_arm_vblank_event(crtc, crtc->state->event);
|
|
|
|
spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
|
|
|
|
crtc->state->event = NULL;
|
|
}
|
|
}
|
|
|
|
static void tegra_crtc_atomic_flush(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *old_crtc_state)
|
|
{
|
|
struct tegra_dc_state *state = to_dc_state(crtc->state);
|
|
struct tegra_dc *dc = to_tegra_dc(crtc);
|
|
u32 value;
|
|
|
|
value = state->planes << 8 | GENERAL_UPDATE;
|
|
tegra_dc_writel(dc, value, DC_CMD_STATE_CONTROL);
|
|
value = tegra_dc_readl(dc, DC_CMD_STATE_CONTROL);
|
|
|
|
value = state->planes | GENERAL_ACT_REQ;
|
|
tegra_dc_writel(dc, value, DC_CMD_STATE_CONTROL);
|
|
value = tegra_dc_readl(dc, DC_CMD_STATE_CONTROL);
|
|
}
|
|
|
|
static const struct drm_crtc_helper_funcs tegra_crtc_helper_funcs = {
|
|
.atomic_begin = tegra_crtc_atomic_begin,
|
|
.atomic_flush = tegra_crtc_atomic_flush,
|
|
.atomic_enable = tegra_crtc_atomic_enable,
|
|
.atomic_disable = tegra_crtc_atomic_disable,
|
|
};
|
|
|
|
static irqreturn_t tegra_dc_irq(int irq, void *data)
|
|
{
|
|
struct tegra_dc *dc = data;
|
|
unsigned long status;
|
|
|
|
status = tegra_dc_readl(dc, DC_CMD_INT_STATUS);
|
|
tegra_dc_writel(dc, status, DC_CMD_INT_STATUS);
|
|
|
|
if (status & FRAME_END_INT) {
|
|
/*
|
|
dev_dbg(dc->dev, "%s(): frame end\n", __func__);
|
|
*/
|
|
dc->stats.frames++;
|
|
}
|
|
|
|
if (status & VBLANK_INT) {
|
|
/*
|
|
dev_dbg(dc->dev, "%s(): vertical blank\n", __func__);
|
|
*/
|
|
drm_crtc_handle_vblank(&dc->base);
|
|
dc->stats.vblank++;
|
|
}
|
|
|
|
if (status & (WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT)) {
|
|
/*
|
|
dev_dbg(dc->dev, "%s(): underflow\n", __func__);
|
|
*/
|
|
dc->stats.underflow++;
|
|
}
|
|
|
|
if (status & (WIN_A_OF_INT | WIN_B_OF_INT | WIN_C_OF_INT)) {
|
|
/*
|
|
dev_dbg(dc->dev, "%s(): overflow\n", __func__);
|
|
*/
|
|
dc->stats.overflow++;
|
|
}
|
|
|
|
if (status & HEAD_UF_INT) {
|
|
dev_dbg_ratelimited(dc->dev, "%s(): head underflow\n", __func__);
|
|
dc->stats.underflow++;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int tegra_dc_init(struct host1x_client *client)
|
|
{
|
|
struct drm_device *drm = dev_get_drvdata(client->parent);
|
|
unsigned long flags = HOST1X_SYNCPT_CLIENT_MANAGED;
|
|
struct tegra_dc *dc = host1x_client_to_dc(client);
|
|
struct tegra_drm *tegra = drm->dev_private;
|
|
struct drm_plane *primary = NULL;
|
|
struct drm_plane *cursor = NULL;
|
|
int err;
|
|
|
|
dc->syncpt = host1x_syncpt_request(client, flags);
|
|
if (!dc->syncpt)
|
|
dev_warn(dc->dev, "failed to allocate syncpoint\n");
|
|
|
|
dc->group = host1x_client_iommu_attach(client, true);
|
|
if (IS_ERR(dc->group)) {
|
|
err = PTR_ERR(dc->group);
|
|
dev_err(client->dev, "failed to attach to domain: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
if (dc->soc->wgrps)
|
|
primary = tegra_dc_add_shared_planes(drm, dc);
|
|
else
|
|
primary = tegra_dc_add_planes(drm, dc);
|
|
|
|
if (IS_ERR(primary)) {
|
|
err = PTR_ERR(primary);
|
|
goto cleanup;
|
|
}
|
|
|
|
if (dc->soc->supports_cursor) {
|
|
cursor = tegra_dc_cursor_plane_create(drm, dc);
|
|
if (IS_ERR(cursor)) {
|
|
err = PTR_ERR(cursor);
|
|
goto cleanup;
|
|
}
|
|
} else {
|
|
/* dedicate one overlay to mouse cursor */
|
|
cursor = tegra_dc_overlay_plane_create(drm, dc, 2, true);
|
|
if (IS_ERR(cursor)) {
|
|
err = PTR_ERR(cursor);
|
|
goto cleanup;
|
|
}
|
|
}
|
|
|
|
err = drm_crtc_init_with_planes(drm, &dc->base, primary, cursor,
|
|
&tegra_crtc_funcs, NULL);
|
|
if (err < 0)
|
|
goto cleanup;
|
|
|
|
drm_crtc_helper_add(&dc->base, &tegra_crtc_helper_funcs);
|
|
|
|
/*
|
|
* Keep track of the minimum pitch alignment across all display
|
|
* controllers.
|
|
*/
|
|
if (dc->soc->pitch_align > tegra->pitch_align)
|
|
tegra->pitch_align = dc->soc->pitch_align;
|
|
|
|
err = tegra_dc_rgb_init(drm, dc);
|
|
if (err < 0 && err != -ENODEV) {
|
|
dev_err(dc->dev, "failed to initialize RGB output: %d\n", err);
|
|
goto cleanup;
|
|
}
|
|
|
|
err = devm_request_irq(dc->dev, dc->irq, tegra_dc_irq, 0,
|
|
dev_name(dc->dev), dc);
|
|
if (err < 0) {
|
|
dev_err(dc->dev, "failed to request IRQ#%u: %d\n", dc->irq,
|
|
err);
|
|
goto cleanup;
|
|
}
|
|
|
|
return 0;
|
|
|
|
cleanup:
|
|
if (!IS_ERR_OR_NULL(cursor))
|
|
drm_plane_cleanup(cursor);
|
|
|
|
if (!IS_ERR(primary))
|
|
drm_plane_cleanup(primary);
|
|
|
|
host1x_client_iommu_detach(client, dc->group);
|
|
host1x_syncpt_free(dc->syncpt);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int tegra_dc_exit(struct host1x_client *client)
|
|
{
|
|
struct tegra_dc *dc = host1x_client_to_dc(client);
|
|
int err;
|
|
|
|
devm_free_irq(dc->dev, dc->irq, dc);
|
|
|
|
err = tegra_dc_rgb_exit(dc);
|
|
if (err) {
|
|
dev_err(dc->dev, "failed to shutdown RGB output: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
host1x_client_iommu_detach(client, dc->group);
|
|
host1x_syncpt_free(dc->syncpt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct host1x_client_ops dc_client_ops = {
|
|
.init = tegra_dc_init,
|
|
.exit = tegra_dc_exit,
|
|
};
|
|
|
|
static const struct tegra_dc_soc_info tegra20_dc_soc_info = {
|
|
.supports_background_color = false,
|
|
.supports_interlacing = false,
|
|
.supports_cursor = false,
|
|
.supports_block_linear = false,
|
|
.has_legacy_blending = true,
|
|
.pitch_align = 8,
|
|
.has_powergate = false,
|
|
.coupled_pm = true,
|
|
.has_nvdisplay = false,
|
|
.num_primary_formats = ARRAY_SIZE(tegra20_primary_formats),
|
|
.primary_formats = tegra20_primary_formats,
|
|
.num_overlay_formats = ARRAY_SIZE(tegra20_overlay_formats),
|
|
.overlay_formats = tegra20_overlay_formats,
|
|
.modifiers = tegra20_modifiers,
|
|
.has_win_a_without_filters = true,
|
|
.has_win_c_without_vert_filter = true,
|
|
};
|
|
|
|
static const struct tegra_dc_soc_info tegra30_dc_soc_info = {
|
|
.supports_background_color = false,
|
|
.supports_interlacing = false,
|
|
.supports_cursor = false,
|
|
.supports_block_linear = false,
|
|
.has_legacy_blending = true,
|
|
.pitch_align = 8,
|
|
.has_powergate = false,
|
|
.coupled_pm = false,
|
|
.has_nvdisplay = false,
|
|
.num_primary_formats = ARRAY_SIZE(tegra20_primary_formats),
|
|
.primary_formats = tegra20_primary_formats,
|
|
.num_overlay_formats = ARRAY_SIZE(tegra20_overlay_formats),
|
|
.overlay_formats = tegra20_overlay_formats,
|
|
.modifiers = tegra20_modifiers,
|
|
.has_win_a_without_filters = false,
|
|
.has_win_c_without_vert_filter = false,
|
|
};
|
|
|
|
static const struct tegra_dc_soc_info tegra114_dc_soc_info = {
|
|
.supports_background_color = false,
|
|
.supports_interlacing = false,
|
|
.supports_cursor = false,
|
|
.supports_block_linear = false,
|
|
.has_legacy_blending = true,
|
|
.pitch_align = 64,
|
|
.has_powergate = true,
|
|
.coupled_pm = false,
|
|
.has_nvdisplay = false,
|
|
.num_primary_formats = ARRAY_SIZE(tegra114_primary_formats),
|
|
.primary_formats = tegra114_primary_formats,
|
|
.num_overlay_formats = ARRAY_SIZE(tegra114_overlay_formats),
|
|
.overlay_formats = tegra114_overlay_formats,
|
|
.modifiers = tegra20_modifiers,
|
|
.has_win_a_without_filters = false,
|
|
.has_win_c_without_vert_filter = false,
|
|
};
|
|
|
|
static const struct tegra_dc_soc_info tegra124_dc_soc_info = {
|
|
.supports_background_color = true,
|
|
.supports_interlacing = true,
|
|
.supports_cursor = true,
|
|
.supports_block_linear = true,
|
|
.has_legacy_blending = false,
|
|
.pitch_align = 64,
|
|
.has_powergate = true,
|
|
.coupled_pm = false,
|
|
.has_nvdisplay = false,
|
|
.num_primary_formats = ARRAY_SIZE(tegra124_primary_formats),
|
|
.primary_formats = tegra124_primary_formats,
|
|
.num_overlay_formats = ARRAY_SIZE(tegra124_overlay_formats),
|
|
.overlay_formats = tegra124_overlay_formats,
|
|
.modifiers = tegra124_modifiers,
|
|
.has_win_a_without_filters = false,
|
|
.has_win_c_without_vert_filter = false,
|
|
};
|
|
|
|
static const struct tegra_dc_soc_info tegra210_dc_soc_info = {
|
|
.supports_background_color = true,
|
|
.supports_interlacing = true,
|
|
.supports_cursor = true,
|
|
.supports_block_linear = true,
|
|
.has_legacy_blending = false,
|
|
.pitch_align = 64,
|
|
.has_powergate = true,
|
|
.coupled_pm = false,
|
|
.has_nvdisplay = false,
|
|
.num_primary_formats = ARRAY_SIZE(tegra114_primary_formats),
|
|
.primary_formats = tegra114_primary_formats,
|
|
.num_overlay_formats = ARRAY_SIZE(tegra114_overlay_formats),
|
|
.overlay_formats = tegra114_overlay_formats,
|
|
.modifiers = tegra124_modifiers,
|
|
.has_win_a_without_filters = false,
|
|
.has_win_c_without_vert_filter = false,
|
|
};
|
|
|
|
static const struct tegra_windowgroup_soc tegra186_dc_wgrps[] = {
|
|
{
|
|
.index = 0,
|
|
.dc = 0,
|
|
.windows = (const unsigned int[]) { 0 },
|
|
.num_windows = 1,
|
|
}, {
|
|
.index = 1,
|
|
.dc = 1,
|
|
.windows = (const unsigned int[]) { 1 },
|
|
.num_windows = 1,
|
|
}, {
|
|
.index = 2,
|
|
.dc = 1,
|
|
.windows = (const unsigned int[]) { 2 },
|
|
.num_windows = 1,
|
|
}, {
|
|
.index = 3,
|
|
.dc = 2,
|
|
.windows = (const unsigned int[]) { 3 },
|
|
.num_windows = 1,
|
|
}, {
|
|
.index = 4,
|
|
.dc = 2,
|
|
.windows = (const unsigned int[]) { 4 },
|
|
.num_windows = 1,
|
|
}, {
|
|
.index = 5,
|
|
.dc = 2,
|
|
.windows = (const unsigned int[]) { 5 },
|
|
.num_windows = 1,
|
|
},
|
|
};
|
|
|
|
static const struct tegra_dc_soc_info tegra186_dc_soc_info = {
|
|
.supports_background_color = true,
|
|
.supports_interlacing = true,
|
|
.supports_cursor = true,
|
|
.supports_block_linear = true,
|
|
.has_legacy_blending = false,
|
|
.pitch_align = 64,
|
|
.has_powergate = false,
|
|
.coupled_pm = false,
|
|
.has_nvdisplay = true,
|
|
.wgrps = tegra186_dc_wgrps,
|
|
.num_wgrps = ARRAY_SIZE(tegra186_dc_wgrps),
|
|
};
|
|
|
|
static const struct of_device_id tegra_dc_of_match[] = {
|
|
{
|
|
.compatible = "nvidia,tegra186-dc",
|
|
.data = &tegra186_dc_soc_info,
|
|
}, {
|
|
.compatible = "nvidia,tegra210-dc",
|
|
.data = &tegra210_dc_soc_info,
|
|
}, {
|
|
.compatible = "nvidia,tegra124-dc",
|
|
.data = &tegra124_dc_soc_info,
|
|
}, {
|
|
.compatible = "nvidia,tegra114-dc",
|
|
.data = &tegra114_dc_soc_info,
|
|
}, {
|
|
.compatible = "nvidia,tegra30-dc",
|
|
.data = &tegra30_dc_soc_info,
|
|
}, {
|
|
.compatible = "nvidia,tegra20-dc",
|
|
.data = &tegra20_dc_soc_info,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tegra_dc_of_match);
|
|
|
|
static int tegra_dc_parse_dt(struct tegra_dc *dc)
|
|
{
|
|
struct device_node *np;
|
|
u32 value = 0;
|
|
int err;
|
|
|
|
err = of_property_read_u32(dc->dev->of_node, "nvidia,head", &value);
|
|
if (err < 0) {
|
|
dev_err(dc->dev, "missing \"nvidia,head\" property\n");
|
|
|
|
/*
|
|
* If the nvidia,head property isn't present, try to find the
|
|
* correct head number by looking up the position of this
|
|
* display controller's node within the device tree. Assuming
|
|
* that the nodes are ordered properly in the DTS file and
|
|
* that the translation into a flattened device tree blob
|
|
* preserves that ordering this will actually yield the right
|
|
* head number.
|
|
*
|
|
* If those assumptions don't hold, this will still work for
|
|
* cases where only a single display controller is used.
|
|
*/
|
|
for_each_matching_node(np, tegra_dc_of_match) {
|
|
if (np == dc->dev->of_node) {
|
|
of_node_put(np);
|
|
break;
|
|
}
|
|
|
|
value++;
|
|
}
|
|
}
|
|
|
|
dc->pipe = value;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_dc_match_by_pipe(struct device *dev, void *data)
|
|
{
|
|
struct tegra_dc *dc = dev_get_drvdata(dev);
|
|
unsigned int pipe = (unsigned long)data;
|
|
|
|
return dc->pipe == pipe;
|
|
}
|
|
|
|
static int tegra_dc_couple(struct tegra_dc *dc)
|
|
{
|
|
/*
|
|
* On Tegra20, DC1 requires DC0 to be taken out of reset in order to
|
|
* be enabled, otherwise CPU hangs on writing to CMD_DISPLAY_COMMAND /
|
|
* POWER_CONTROL registers during CRTC enabling.
|
|
*/
|
|
if (dc->soc->coupled_pm && dc->pipe == 1) {
|
|
u32 flags = DL_FLAG_PM_RUNTIME | DL_FLAG_AUTOREMOVE;
|
|
struct device_link *link;
|
|
struct device *partner;
|
|
|
|
partner = driver_find_device(dc->dev->driver, NULL, NULL,
|
|
tegra_dc_match_by_pipe);
|
|
if (!partner)
|
|
return -EPROBE_DEFER;
|
|
|
|
link = device_link_add(dc->dev, partner, flags);
|
|
if (!link) {
|
|
dev_err(dc->dev, "failed to link controllers\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_dbg(dc->dev, "coupled to %s\n", dev_name(partner));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_dc_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *regs;
|
|
struct tegra_dc *dc;
|
|
int err;
|
|
|
|
dc = devm_kzalloc(&pdev->dev, sizeof(*dc), GFP_KERNEL);
|
|
if (!dc)
|
|
return -ENOMEM;
|
|
|
|
dc->soc = of_device_get_match_data(&pdev->dev);
|
|
|
|
INIT_LIST_HEAD(&dc->list);
|
|
dc->dev = &pdev->dev;
|
|
|
|
err = tegra_dc_parse_dt(dc);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = tegra_dc_couple(dc);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
dc->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(dc->clk)) {
|
|
dev_err(&pdev->dev, "failed to get clock\n");
|
|
return PTR_ERR(dc->clk);
|
|
}
|
|
|
|
dc->rst = devm_reset_control_get(&pdev->dev, "dc");
|
|
if (IS_ERR(dc->rst)) {
|
|
dev_err(&pdev->dev, "failed to get reset\n");
|
|
return PTR_ERR(dc->rst);
|
|
}
|
|
|
|
/* assert reset and disable clock */
|
|
err = clk_prepare_enable(dc->clk);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
usleep_range(2000, 4000);
|
|
|
|
err = reset_control_assert(dc->rst);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
usleep_range(2000, 4000);
|
|
|
|
clk_disable_unprepare(dc->clk);
|
|
|
|
if (dc->soc->has_powergate) {
|
|
if (dc->pipe == 0)
|
|
dc->powergate = TEGRA_POWERGATE_DIS;
|
|
else
|
|
dc->powergate = TEGRA_POWERGATE_DISB;
|
|
|
|
tegra_powergate_power_off(dc->powergate);
|
|
}
|
|
|
|
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
dc->regs = devm_ioremap_resource(&pdev->dev, regs);
|
|
if (IS_ERR(dc->regs))
|
|
return PTR_ERR(dc->regs);
|
|
|
|
dc->irq = platform_get_irq(pdev, 0);
|
|
if (dc->irq < 0) {
|
|
dev_err(&pdev->dev, "failed to get IRQ\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
err = tegra_dc_rgb_probe(dc);
|
|
if (err < 0 && err != -ENODEV) {
|
|
dev_err(&pdev->dev, "failed to probe RGB output: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, dc);
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
INIT_LIST_HEAD(&dc->client.list);
|
|
dc->client.ops = &dc_client_ops;
|
|
dc->client.dev = &pdev->dev;
|
|
|
|
err = host1x_client_register(&dc->client);
|
|
if (err < 0) {
|
|
dev_err(&pdev->dev, "failed to register host1x client: %d\n",
|
|
err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_dc_remove(struct platform_device *pdev)
|
|
{
|
|
struct tegra_dc *dc = platform_get_drvdata(pdev);
|
|
int err;
|
|
|
|
err = host1x_client_unregister(&dc->client);
|
|
if (err < 0) {
|
|
dev_err(&pdev->dev, "failed to unregister host1x client: %d\n",
|
|
err);
|
|
return err;
|
|
}
|
|
|
|
err = tegra_dc_rgb_remove(dc);
|
|
if (err < 0) {
|
|
dev_err(&pdev->dev, "failed to remove RGB output: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int tegra_dc_suspend(struct device *dev)
|
|
{
|
|
struct tegra_dc *dc = dev_get_drvdata(dev);
|
|
int err;
|
|
|
|
err = reset_control_assert(dc->rst);
|
|
if (err < 0) {
|
|
dev_err(dev, "failed to assert reset: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
if (dc->soc->has_powergate)
|
|
tegra_powergate_power_off(dc->powergate);
|
|
|
|
clk_disable_unprepare(dc->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_dc_resume(struct device *dev)
|
|
{
|
|
struct tegra_dc *dc = dev_get_drvdata(dev);
|
|
int err;
|
|
|
|
if (dc->soc->has_powergate) {
|
|
err = tegra_powergate_sequence_power_up(dc->powergate, dc->clk,
|
|
dc->rst);
|
|
if (err < 0) {
|
|
dev_err(dev, "failed to power partition: %d\n", err);
|
|
return err;
|
|
}
|
|
} else {
|
|
err = clk_prepare_enable(dc->clk);
|
|
if (err < 0) {
|
|
dev_err(dev, "failed to enable clock: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = reset_control_deassert(dc->rst);
|
|
if (err < 0) {
|
|
dev_err(dev, "failed to deassert reset: %d\n", err);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops tegra_dc_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(tegra_dc_suspend, tegra_dc_resume, NULL)
|
|
};
|
|
|
|
struct platform_driver tegra_dc_driver = {
|
|
.driver = {
|
|
.name = "tegra-dc",
|
|
.of_match_table = tegra_dc_of_match,
|
|
.pm = &tegra_dc_pm_ops,
|
|
},
|
|
.probe = tegra_dc_probe,
|
|
.remove = tegra_dc_remove,
|
|
};
|