mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 12:49:08 +07:00
9920322ccd
After successful loading of firmware, a CARD READY indication is received by host. Common device configuration parameters are sent to the device after this. It includes information like device operating mode (Wi-Fi alone or BT coex), power save related parameters, GPIO information etc. As device supports BT coex, this frame is send in COEX queue initially. Based on the operating mode, CARD READY indication is received from each protocol module in firmware i.e. WLAN, BT. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
743 lines
19 KiB
C
743 lines
19 KiB
C
/**
|
|
* Copyright (c) 2014 Redpine Signals Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/firmware.h>
|
|
#include "rsi_mgmt.h"
|
|
#include "rsi_hal.h"
|
|
#include "rsi_sdio.h"
|
|
|
|
/* FLASH Firmware */
|
|
static struct ta_metadata metadata_flash_content[] = {
|
|
{"flash_content", 0x00010000},
|
|
{"rsi/rs9113_wlan_qspi.rps", 0x00010000},
|
|
};
|
|
|
|
/**
|
|
* rsi_send_data_pkt() - This function sends the recieved data packet from
|
|
* driver to device.
|
|
* @common: Pointer to the driver private structure.
|
|
* @skb: Pointer to the socket buffer structure.
|
|
*
|
|
* Return: status: 0 on success, -1 on failure.
|
|
*/
|
|
int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb)
|
|
{
|
|
struct rsi_hw *adapter = common->priv;
|
|
struct ieee80211_hdr *tmp_hdr;
|
|
struct ieee80211_tx_info *info;
|
|
struct skb_info *tx_params;
|
|
struct ieee80211_bss_conf *bss;
|
|
int status;
|
|
u8 ieee80211_size = MIN_802_11_HDR_LEN;
|
|
u8 extnd_size;
|
|
__le16 *frame_desc;
|
|
u16 seq_num;
|
|
|
|
info = IEEE80211_SKB_CB(skb);
|
|
bss = &info->control.vif->bss_conf;
|
|
tx_params = (struct skb_info *)info->driver_data;
|
|
|
|
if (!bss->assoc) {
|
|
status = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
tmp_hdr = (struct ieee80211_hdr *)&skb->data[0];
|
|
seq_num = (le16_to_cpu(tmp_hdr->seq_ctrl) >> 4);
|
|
|
|
extnd_size = ((uintptr_t)skb->data & 0x3);
|
|
|
|
if ((FRAME_DESC_SZ + extnd_size) > skb_headroom(skb)) {
|
|
rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
|
|
status = -ENOSPC;
|
|
goto err;
|
|
}
|
|
|
|
skb_push(skb, (FRAME_DESC_SZ + extnd_size));
|
|
frame_desc = (__le16 *)&skb->data[0];
|
|
memset((u8 *)frame_desc, 0, FRAME_DESC_SZ);
|
|
|
|
if (ieee80211_is_data_qos(tmp_hdr->frame_control)) {
|
|
ieee80211_size += 2;
|
|
frame_desc[6] |= cpu_to_le16(BIT(12));
|
|
}
|
|
|
|
if ((!(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) &&
|
|
(common->secinfo.security_enable)) {
|
|
if (rsi_is_cipher_wep(common))
|
|
ieee80211_size += 4;
|
|
else
|
|
ieee80211_size += 8;
|
|
frame_desc[6] |= cpu_to_le16(BIT(15));
|
|
}
|
|
|
|
frame_desc[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
|
|
(RSI_WIFI_DATA_Q << 12));
|
|
frame_desc[2] = cpu_to_le16((extnd_size) | (ieee80211_size) << 8);
|
|
|
|
if (common->min_rate != 0xffff) {
|
|
/* Send fixed rate */
|
|
frame_desc[3] = cpu_to_le16(RATE_INFO_ENABLE);
|
|
frame_desc[4] = cpu_to_le16(common->min_rate);
|
|
|
|
if (conf_is_ht40(&common->priv->hw->conf))
|
|
frame_desc[5] = cpu_to_le16(FULL40M_ENABLE);
|
|
|
|
if (common->vif_info[0].sgi) {
|
|
if (common->min_rate & 0x100) /* Only MCS rates */
|
|
frame_desc[4] |=
|
|
cpu_to_le16(ENABLE_SHORTGI_RATE);
|
|
}
|
|
|
|
}
|
|
|
|
frame_desc[6] |= cpu_to_le16(seq_num & 0xfff);
|
|
frame_desc[7] = cpu_to_le16(((tx_params->tid & 0xf) << 4) |
|
|
(skb->priority & 0xf) |
|
|
(tx_params->sta_id << 8));
|
|
|
|
status = adapter->host_intf_ops->write_pkt(common->priv, skb->data,
|
|
skb->len);
|
|
if (status)
|
|
rsi_dbg(ERR_ZONE, "%s: Failed to write pkt\n",
|
|
__func__);
|
|
|
|
err:
|
|
++common->tx_stats.total_tx_pkt_freed[skb->priority];
|
|
rsi_indicate_tx_status(common->priv, skb, status);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* rsi_send_mgmt_pkt() - This functions sends the received management packet
|
|
* from driver to device.
|
|
* @common: Pointer to the driver private structure.
|
|
* @skb: Pointer to the socket buffer structure.
|
|
*
|
|
* Return: status: 0 on success, -1 on failure.
|
|
*/
|
|
int rsi_send_mgmt_pkt(struct rsi_common *common,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct rsi_hw *adapter = common->priv;
|
|
struct ieee80211_hdr *wh;
|
|
struct ieee80211_tx_info *info;
|
|
struct ieee80211_bss_conf *bss;
|
|
struct ieee80211_hw *hw = adapter->hw;
|
|
struct ieee80211_conf *conf = &hw->conf;
|
|
struct skb_info *tx_params;
|
|
int status = -E2BIG;
|
|
__le16 *msg;
|
|
u8 extnd_size;
|
|
u8 vap_id = 0;
|
|
|
|
info = IEEE80211_SKB_CB(skb);
|
|
tx_params = (struct skb_info *)info->driver_data;
|
|
extnd_size = ((uintptr_t)skb->data & 0x3);
|
|
|
|
if (tx_params->flags & INTERNAL_MGMT_PKT) {
|
|
if ((extnd_size) > skb_headroom(skb)) {
|
|
rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
|
|
dev_kfree_skb(skb);
|
|
return -ENOSPC;
|
|
}
|
|
skb_push(skb, extnd_size);
|
|
skb->data[extnd_size + 4] = extnd_size;
|
|
status = adapter->host_intf_ops->write_pkt(common->priv,
|
|
(u8 *)skb->data,
|
|
skb->len);
|
|
if (status) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Failed to write the packet\n", __func__);
|
|
}
|
|
dev_kfree_skb(skb);
|
|
return status;
|
|
}
|
|
|
|
bss = &info->control.vif->bss_conf;
|
|
wh = (struct ieee80211_hdr *)&skb->data[0];
|
|
|
|
if (FRAME_DESC_SZ > skb_headroom(skb))
|
|
goto err;
|
|
|
|
skb_push(skb, FRAME_DESC_SZ);
|
|
memset(skb->data, 0, FRAME_DESC_SZ);
|
|
msg = (__le16 *)skb->data;
|
|
|
|
if (skb->len > MAX_MGMT_PKT_SIZE) {
|
|
rsi_dbg(INFO_ZONE, "%s: Dropping mgmt pkt > 512\n", __func__);
|
|
goto err;
|
|
}
|
|
|
|
msg[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
|
|
(RSI_WIFI_MGMT_Q << 12));
|
|
msg[1] = cpu_to_le16(TX_DOT11_MGMT);
|
|
msg[2] = cpu_to_le16(MIN_802_11_HDR_LEN << 8);
|
|
msg[3] = cpu_to_le16(RATE_INFO_ENABLE);
|
|
msg[6] = cpu_to_le16(le16_to_cpu(wh->seq_ctrl) >> 4);
|
|
|
|
if (wh->addr1[0] & BIT(0))
|
|
msg[3] |= cpu_to_le16(RSI_BROADCAST_PKT);
|
|
|
|
if (common->band == NL80211_BAND_2GHZ)
|
|
msg[4] = cpu_to_le16(RSI_11B_MODE);
|
|
else
|
|
msg[4] = cpu_to_le16((RSI_RATE_6 & 0x0f) | RSI_11G_MODE);
|
|
|
|
if (conf_is_ht40(conf)) {
|
|
msg[4] = cpu_to_le16(0xB | RSI_11G_MODE);
|
|
msg[5] = cpu_to_le16(0x6);
|
|
}
|
|
|
|
/* Indicate to firmware to give cfm */
|
|
if ((skb->data[16] == IEEE80211_STYPE_PROBE_REQ) && (!bss->assoc)) {
|
|
msg[1] |= cpu_to_le16(BIT(10));
|
|
msg[7] = cpu_to_le16(PROBEREQ_CONFIRM);
|
|
common->mgmt_q_block = true;
|
|
}
|
|
|
|
msg[7] |= cpu_to_le16(vap_id << 8);
|
|
|
|
status = adapter->host_intf_ops->write_pkt(common->priv, (u8 *)msg,
|
|
skb->len);
|
|
if (status)
|
|
rsi_dbg(ERR_ZONE, "%s: Failed to write the packet\n", __func__);
|
|
|
|
err:
|
|
rsi_indicate_tx_status(common->priv, skb, status);
|
|
return status;
|
|
}
|
|
|
|
static void bl_cmd_timeout(unsigned long priv)
|
|
{
|
|
struct rsi_hw *adapter = (struct rsi_hw *)priv;
|
|
|
|
adapter->blcmd_timer_expired = true;
|
|
del_timer(&adapter->bl_cmd_timer);
|
|
}
|
|
|
|
static int bl_start_cmd_timer(struct rsi_hw *adapter, u32 timeout)
|
|
{
|
|
init_timer(&adapter->bl_cmd_timer);
|
|
adapter->bl_cmd_timer.data = (unsigned long)adapter;
|
|
adapter->bl_cmd_timer.function = (void *)&bl_cmd_timeout;
|
|
adapter->bl_cmd_timer.expires = (msecs_to_jiffies(timeout) + jiffies);
|
|
|
|
adapter->blcmd_timer_expired = false;
|
|
add_timer(&adapter->bl_cmd_timer);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bl_stop_cmd_timer(struct rsi_hw *adapter)
|
|
{
|
|
adapter->blcmd_timer_expired = false;
|
|
if (timer_pending(&adapter->bl_cmd_timer))
|
|
del_timer(&adapter->bl_cmd_timer);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bl_write_cmd(struct rsi_hw *adapter, u8 cmd, u8 exp_resp,
|
|
u16 *cmd_resp)
|
|
{
|
|
struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
|
|
u32 regin_val = 0, regout_val = 0;
|
|
u32 regin_input = 0;
|
|
u8 output = 0;
|
|
int status;
|
|
|
|
regin_input = (REGIN_INPUT | adapter->priv->coex_mode);
|
|
|
|
while (!adapter->blcmd_timer_expired) {
|
|
regin_val = 0;
|
|
status = hif_ops->master_reg_read(adapter, SWBL_REGIN,
|
|
®in_val, 2);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Command %0x REGIN reading failed..\n",
|
|
__func__, cmd);
|
|
return status;
|
|
}
|
|
mdelay(1);
|
|
if ((regin_val >> 12) != REGIN_VALID)
|
|
break;
|
|
}
|
|
if (adapter->blcmd_timer_expired) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Command %0x REGIN reading timed out..\n",
|
|
__func__, cmd);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
rsi_dbg(INFO_ZONE,
|
|
"Issuing write to Regin val:%0x sending cmd:%0x\n",
|
|
regin_val, (cmd | regin_input << 8));
|
|
status = hif_ops->master_reg_write(adapter, SWBL_REGIN,
|
|
(cmd | regin_input << 8), 2);
|
|
if (status < 0)
|
|
return status;
|
|
mdelay(1);
|
|
|
|
if (cmd == LOAD_HOSTED_FW || cmd == JUMP_TO_ZERO_PC) {
|
|
/* JUMP_TO_ZERO_PC doesn't expect
|
|
* any response. So return from here
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
while (!adapter->blcmd_timer_expired) {
|
|
regout_val = 0;
|
|
status = hif_ops->master_reg_read(adapter, SWBL_REGOUT,
|
|
®out_val, 2);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Command %0x REGOUT reading failed..\n",
|
|
__func__, cmd);
|
|
return status;
|
|
}
|
|
mdelay(1);
|
|
if ((regout_val >> 8) == REGOUT_VALID)
|
|
break;
|
|
}
|
|
if (adapter->blcmd_timer_expired) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Command %0x REGOUT reading timed out..\n",
|
|
__func__, cmd);
|
|
return status;
|
|
}
|
|
|
|
*cmd_resp = ((u16 *)®out_val)[0] & 0xffff;
|
|
|
|
output = ((u8 *)®out_val)[0] & 0xff;
|
|
|
|
status = hif_ops->master_reg_write(adapter, SWBL_REGOUT,
|
|
(cmd | REGOUT_INVALID << 8), 2);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Command %0x REGOUT writing failed..\n",
|
|
__func__, cmd);
|
|
return status;
|
|
}
|
|
mdelay(1);
|
|
|
|
if (output != exp_resp) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Recvd resp %x for cmd %0x\n",
|
|
__func__, output, cmd);
|
|
return -EINVAL;
|
|
}
|
|
rsi_dbg(INFO_ZONE,
|
|
"%s: Recvd Expected resp %x for cmd %0x\n",
|
|
__func__, output, cmd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bl_cmd(struct rsi_hw *adapter, u8 cmd, u8 exp_resp, char *str)
|
|
{
|
|
u16 regout_val = 0;
|
|
u32 timeout;
|
|
int status;
|
|
|
|
if ((cmd == EOF_REACHED) || (cmd == PING_VALID) || (cmd == PONG_VALID))
|
|
timeout = BL_BURN_TIMEOUT;
|
|
else
|
|
timeout = BL_CMD_TIMEOUT;
|
|
|
|
bl_start_cmd_timer(adapter, timeout);
|
|
status = bl_write_cmd(adapter, cmd, exp_resp, ®out_val);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Command %s (%0x) writing failed..\n",
|
|
__func__, str, cmd);
|
|
return status;
|
|
}
|
|
bl_stop_cmd_timer(adapter);
|
|
return 0;
|
|
}
|
|
|
|
#define CHECK_SUM_OFFSET 20
|
|
#define LEN_OFFSET 8
|
|
#define ADDR_OFFSET 16
|
|
static int bl_write_header(struct rsi_hw *adapter, u8 *flash_content,
|
|
u32 content_size)
|
|
{
|
|
struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
|
|
struct bl_header bl_hdr;
|
|
u32 write_addr, write_len;
|
|
int status;
|
|
|
|
bl_hdr.flags = 0;
|
|
bl_hdr.image_no = cpu_to_le32(adapter->priv->coex_mode);
|
|
bl_hdr.check_sum = cpu_to_le32(
|
|
*(u32 *)&flash_content[CHECK_SUM_OFFSET]);
|
|
bl_hdr.flash_start_address = cpu_to_le32(
|
|
*(u32 *)&flash_content[ADDR_OFFSET]);
|
|
bl_hdr.flash_len = cpu_to_le32(*(u32 *)&flash_content[LEN_OFFSET]);
|
|
write_len = sizeof(struct bl_header);
|
|
|
|
if (adapter->rsi_host_intf == RSI_HOST_INTF_USB) {
|
|
write_addr = PING_BUFFER_ADDRESS;
|
|
status = hif_ops->write_reg_multiple(adapter, write_addr,
|
|
(u8 *)&bl_hdr, write_len);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Failed to load Version/CRC structure\n",
|
|
__func__);
|
|
return status;
|
|
}
|
|
} else {
|
|
write_addr = PING_BUFFER_ADDRESS >> 16;
|
|
status = hif_ops->master_access_msword(adapter, write_addr);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Unable to set ms word to common reg\n",
|
|
__func__);
|
|
return status;
|
|
}
|
|
write_addr = RSI_SD_REQUEST_MASTER |
|
|
(PING_BUFFER_ADDRESS & 0xFFFF);
|
|
status = hif_ops->write_reg_multiple(adapter, write_addr,
|
|
(u8 *)&bl_hdr, write_len);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Failed to load Version/CRC structure\n",
|
|
__func__);
|
|
return status;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static u32 read_flash_capacity(struct rsi_hw *adapter)
|
|
{
|
|
u32 flash_sz = 0;
|
|
|
|
if ((adapter->host_intf_ops->master_reg_read(adapter, FLASH_SIZE_ADDR,
|
|
&flash_sz, 2)) < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Flash size reading failed..\n",
|
|
__func__);
|
|
return 0;
|
|
}
|
|
rsi_dbg(INIT_ZONE, "Flash capacity: %d KiloBytes\n", flash_sz);
|
|
|
|
return (flash_sz * 1024); /* Return size in kbytes */
|
|
}
|
|
|
|
static int ping_pong_write(struct rsi_hw *adapter, u8 cmd, u8 *addr, u32 size)
|
|
{
|
|
struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
|
|
u32 block_size = adapter->block_size;
|
|
u32 cmd_addr;
|
|
u16 cmd_resp, cmd_req;
|
|
u8 *str;
|
|
int status;
|
|
|
|
if (cmd == PING_WRITE) {
|
|
cmd_addr = PING_BUFFER_ADDRESS;
|
|
cmd_resp = PONG_AVAIL;
|
|
cmd_req = PING_VALID;
|
|
str = "PING_VALID";
|
|
} else {
|
|
cmd_addr = PONG_BUFFER_ADDRESS;
|
|
cmd_resp = PING_AVAIL;
|
|
cmd_req = PONG_VALID;
|
|
str = "PONG_VALID";
|
|
}
|
|
|
|
status = hif_ops->load_data_master_write(adapter, cmd_addr, size,
|
|
block_size, addr);
|
|
if (status) {
|
|
rsi_dbg(ERR_ZONE, "%s: Unable to write blk at addr %0x\n",
|
|
__func__, *addr);
|
|
return status;
|
|
}
|
|
|
|
status = bl_cmd(adapter, cmd_req, cmd_resp, str);
|
|
if (status) {
|
|
bl_stop_cmd_timer(adapter);
|
|
return status;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int auto_fw_upgrade(struct rsi_hw *adapter, u8 *flash_content,
|
|
u32 content_size)
|
|
{
|
|
u8 cmd, *temp_flash_content;
|
|
u32 temp_content_size, num_flash, index;
|
|
u32 flash_start_address;
|
|
int status;
|
|
|
|
temp_flash_content = flash_content;
|
|
|
|
if (content_size > MAX_FLASH_FILE_SIZE) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Flash Content size is more than 400K %u\n",
|
|
__func__, MAX_FLASH_FILE_SIZE);
|
|
return -EINVAL;
|
|
}
|
|
|
|
flash_start_address = *(u32 *)&flash_content[FLASH_START_ADDRESS];
|
|
rsi_dbg(INFO_ZONE, "flash start address: %08x\n", flash_start_address);
|
|
|
|
if (flash_start_address < FW_IMAGE_MIN_ADDRESS) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Fw image Flash Start Address is less than 64K\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (flash_start_address % FLASH_SECTOR_SIZE) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Flash Start Address is not multiple of 4K\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if ((flash_start_address + content_size) > adapter->flash_capacity) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Flash Content will cross max flash size\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
temp_content_size = content_size;
|
|
num_flash = content_size / FLASH_WRITE_CHUNK_SIZE;
|
|
|
|
rsi_dbg(INFO_ZONE, "content_size: %d, num_flash: %d\n",
|
|
content_size, num_flash);
|
|
|
|
for (index = 0; index <= num_flash; index++) {
|
|
rsi_dbg(INFO_ZONE, "flash index: %d\n", index);
|
|
if (index != num_flash) {
|
|
content_size = FLASH_WRITE_CHUNK_SIZE;
|
|
rsi_dbg(INFO_ZONE, "QSPI content_size:%d\n",
|
|
content_size);
|
|
} else {
|
|
content_size =
|
|
temp_content_size % FLASH_WRITE_CHUNK_SIZE;
|
|
rsi_dbg(INFO_ZONE,
|
|
"Writing last sector content_size:%d\n",
|
|
content_size);
|
|
if (!content_size) {
|
|
rsi_dbg(INFO_ZONE, "instruction size zero\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (index % 2)
|
|
cmd = PING_WRITE;
|
|
else
|
|
cmd = PONG_WRITE;
|
|
|
|
status = ping_pong_write(adapter, cmd, flash_content,
|
|
content_size);
|
|
if (status) {
|
|
rsi_dbg(ERR_ZONE, "%s: Unable to load %d block\n",
|
|
__func__, index);
|
|
return status;
|
|
}
|
|
|
|
rsi_dbg(INFO_ZONE,
|
|
"%s: Successfully loaded %d instructions\n",
|
|
__func__, index);
|
|
flash_content += content_size;
|
|
}
|
|
|
|
status = bl_cmd(adapter, EOF_REACHED, FW_LOADING_SUCCESSFUL,
|
|
"EOF_REACHED");
|
|
if (status) {
|
|
bl_stop_cmd_timer(adapter);
|
|
return status;
|
|
}
|
|
rsi_dbg(INFO_ZONE, "FW loading is done and FW is running..\n");
|
|
return 0;
|
|
}
|
|
|
|
static int rsi_load_firmware(struct rsi_hw *adapter)
|
|
{
|
|
struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
|
|
const struct firmware *fw_entry = NULL;
|
|
u32 regout_val = 0, content_size;
|
|
u16 tmp_regout_val = 0;
|
|
u8 *flash_content = NULL;
|
|
struct ta_metadata *metadata_p;
|
|
int status;
|
|
|
|
bl_start_cmd_timer(adapter, BL_CMD_TIMEOUT);
|
|
|
|
while (!adapter->blcmd_timer_expired) {
|
|
status = hif_ops->master_reg_read(adapter, SWBL_REGOUT,
|
|
®out_val, 2);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: REGOUT read failed\n", __func__);
|
|
return status;
|
|
}
|
|
mdelay(1);
|
|
if ((regout_val >> 8) == REGOUT_VALID)
|
|
break;
|
|
}
|
|
if (adapter->blcmd_timer_expired) {
|
|
rsi_dbg(ERR_ZONE, "%s: REGOUT read timedout\n", __func__);
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Soft boot loader not present\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
bl_stop_cmd_timer(adapter);
|
|
|
|
rsi_dbg(INFO_ZONE, "Received Board Version Number: %x\n",
|
|
(regout_val & 0xff));
|
|
|
|
status = hif_ops->master_reg_write(adapter, SWBL_REGOUT,
|
|
(REGOUT_INVALID | REGOUT_INVALID << 8),
|
|
2);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE, "%s: REGOUT writing failed..\n", __func__);
|
|
return status;
|
|
}
|
|
mdelay(1);
|
|
|
|
status = bl_cmd(adapter, CONFIG_AUTO_READ_MODE, CMD_PASS,
|
|
"AUTO_READ_CMD");
|
|
if (status < 0)
|
|
return status;
|
|
|
|
adapter->flash_capacity = read_flash_capacity(adapter);
|
|
if (adapter->flash_capacity <= 0) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Unable to read flash size from EEPROM\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
metadata_p = &metadata_flash_content[adapter->priv->coex_mode];
|
|
|
|
rsi_dbg(INIT_ZONE, "%s: Loading file %s\n", __func__, metadata_p->name);
|
|
adapter->fw_file_name = metadata_p->name;
|
|
|
|
status = request_firmware(&fw_entry, metadata_p->name, adapter->device);
|
|
if (status < 0) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed to open file %s\n",
|
|
__func__, metadata_p->name);
|
|
return status;
|
|
}
|
|
flash_content = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
|
|
if (!flash_content) {
|
|
rsi_dbg(ERR_ZONE, "%s: Failed to copy firmware\n", __func__);
|
|
status = -EIO;
|
|
goto fail;
|
|
}
|
|
content_size = fw_entry->size;
|
|
rsi_dbg(INFO_ZONE, "FW Length = %d bytes\n", content_size);
|
|
|
|
status = bl_write_header(adapter, flash_content, content_size);
|
|
if (status) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: RPS Image header loading failed\n",
|
|
__func__);
|
|
goto fail;
|
|
}
|
|
|
|
bl_start_cmd_timer(adapter, BL_CMD_TIMEOUT);
|
|
status = bl_write_cmd(adapter, CHECK_CRC, CMD_PASS, &tmp_regout_val);
|
|
if (status) {
|
|
bl_stop_cmd_timer(adapter);
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: CHECK_CRC Command writing failed..\n",
|
|
__func__);
|
|
if ((tmp_regout_val & 0xff) == CMD_FAIL) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"CRC Fail.. Proceeding to Upgrade mode\n");
|
|
goto fw_upgrade;
|
|
}
|
|
}
|
|
bl_stop_cmd_timer(adapter);
|
|
|
|
status = bl_cmd(adapter, POLLING_MODE, CMD_PASS, "POLLING_MODE");
|
|
if (status)
|
|
goto fail;
|
|
|
|
load_image_cmd:
|
|
status = bl_cmd(adapter, LOAD_HOSTED_FW, LOADING_INITIATED,
|
|
"LOAD_HOSTED_FW");
|
|
if (status)
|
|
goto fail;
|
|
rsi_dbg(INFO_ZONE, "Load Image command passed..\n");
|
|
goto success;
|
|
|
|
fw_upgrade:
|
|
status = bl_cmd(adapter, BURN_HOSTED_FW, SEND_RPS_FILE, "FW_UPGRADE");
|
|
if (status)
|
|
goto fail;
|
|
|
|
rsi_dbg(INFO_ZONE, "Burn Command Pass.. Upgrading the firmware\n");
|
|
|
|
status = auto_fw_upgrade(adapter, flash_content, content_size);
|
|
if (status == 0) {
|
|
rsi_dbg(ERR_ZONE, "Firmware upgradation Done\n");
|
|
goto load_image_cmd;
|
|
}
|
|
rsi_dbg(ERR_ZONE, "Firmware upgrade failed\n");
|
|
|
|
status = bl_cmd(adapter, CONFIG_AUTO_READ_MODE, CMD_PASS,
|
|
"AUTO_READ_MODE");
|
|
if (status)
|
|
goto fail;
|
|
|
|
success:
|
|
rsi_dbg(ERR_ZONE, "***** Firmware Loading successful *****\n");
|
|
kfree(flash_content);
|
|
release_firmware(fw_entry);
|
|
return 0;
|
|
|
|
fail:
|
|
rsi_dbg(ERR_ZONE, "##### Firmware loading failed #####\n");
|
|
kfree(flash_content);
|
|
release_firmware(fw_entry);
|
|
return status;
|
|
}
|
|
|
|
int rsi_hal_device_init(struct rsi_hw *adapter)
|
|
{
|
|
struct rsi_common *common = adapter->priv;
|
|
|
|
common->coex_mode = RSI_DEV_COEX_MODE_WIFI_ALONE;
|
|
common->oper_mode = RSI_DEV_OPMODE_WIFI_ALONE;
|
|
adapter->device_model = RSI_DEV_9113;
|
|
|
|
switch (adapter->device_model) {
|
|
case RSI_DEV_9113:
|
|
if (rsi_load_firmware(adapter)) {
|
|
rsi_dbg(ERR_ZONE,
|
|
"%s: Failed to load TA instructions\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
common->fsm_state = FSM_CARD_NOT_READY;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(rsi_hal_device_init);
|
|
|