mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
4486baca66
The soc spdif and i2s controllers always only have one compontent, so always require #sound-dai-cells to be 0. Therefore there is no need to duplicate this property in individual boards. So move them to rk3399.dtsi. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
202 lines
3.9 KiB
Plaintext
202 lines
3.9 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "rk3399-sapphire.dtsi"
|
|
|
|
/ {
|
|
model = "Excavator-RK3399 Board";
|
|
compatible = "rockchip,rk3399-sapphire-excavator", "rockchip,rk3399";
|
|
|
|
adc-keys {
|
|
compatible = "adc-keys";
|
|
io-channels = <&saradc 1>;
|
|
io-channel-names = "buttons";
|
|
keyup-threshold-microvolt = <1800000>;
|
|
poll-interval = <100>;
|
|
|
|
button-up {
|
|
label = "Volume Up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
press-threshold-microvolt = <100000>;
|
|
};
|
|
|
|
button-down {
|
|
label = "Volume Down";
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
press-threshold-microvolt = <300000>;
|
|
};
|
|
|
|
back {
|
|
label = "Back";
|
|
linux,code = <KEY_BACK>;
|
|
press-threshold-microvolt = <985000>;
|
|
};
|
|
|
|
menu {
|
|
label = "Menu";
|
|
linux,code = <KEY_MENU>;
|
|
press-threshold-microvolt = <1314000>;
|
|
};
|
|
};
|
|
|
|
edp_panel: edp-panel {
|
|
compatible ="lg,lp079qx1-sp0v", "simple-panel";
|
|
backlight = <&backlight>;
|
|
enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd_panel_reset>;
|
|
power-supply = <&vcc3v3_s0>;
|
|
|
|
ports {
|
|
panel_in_edp: endpoint {
|
|
remote-endpoint = <&edp_out_panel>;
|
|
};
|
|
};
|
|
};
|
|
|
|
rt5651-sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "realtek,rt5651-codec";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,mclk-fs = <256>;
|
|
simple-audio-card,widgets =
|
|
"Microphone", "Mic Jack",
|
|
"Headphone", "Headphone Jack";
|
|
simple-audio-card,routing =
|
|
"Mic Jack", "MICBIAS1",
|
|
"IN1P", "Mic Jack",
|
|
"Headphone Jack", "HPOL",
|
|
"Headphone Jack", "HPOR";
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s0>;
|
|
};
|
|
simple-audio-card,codec {
|
|
sound-dai = <&rt5651>;
|
|
};
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
clocks = <&rk808 1>;
|
|
clock-names = "ext_clock";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_enable_h>;
|
|
|
|
/*
|
|
* On the module itself this is one of these (depending
|
|
* on the actual card populated):
|
|
* - SDIO_RESET_L_WL_REG_ON
|
|
* - PDN (power down when low)
|
|
*/
|
|
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&backlight {
|
|
enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&edp {
|
|
status = "okay";
|
|
|
|
ports {
|
|
edp_out: port@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
edp_out_panel: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&panel_in_edp>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
i2c-scl-rising-time-ns = <300>;
|
|
i2c-scl-falling-time-ns = <15>;
|
|
status = "okay";
|
|
|
|
rt5651: rt5651@1a {
|
|
compatible = "rockchip,rt5651";
|
|
reg = <0x1a>;
|
|
clocks = <&cru SCLK_I2S_8CH_OUT>;
|
|
clock-names = "mclk";
|
|
hp-det-gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>;
|
|
spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&i2c4 {
|
|
i2c-scl-rising-time-ns = <600>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
|
|
accelerometer@68 {
|
|
compatible = "invensense,mpu6500";
|
|
reg = <0x68>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
};
|
|
|
|
&i2s0 {
|
|
rockchip,playback-channels = <8>;
|
|
rockchip,capture-channels = <8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
|
|
num-lanes = <4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_clkreqn_cpm>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
sdio-pwrseq {
|
|
wifi_enable_h: wifi-enable-h {
|
|
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
lcd-panel {
|
|
lcd_panel_reset: lcd-panel-reset {
|
|
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdio0 {
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-sdio-irq;
|
|
clock-frequency = <50000000>;
|
|
disable-wp;
|
|
keep-power-in-suspend;
|
|
max-frequency = <50000000>;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
non-removable;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
|
sd-uhs-sdr104;
|
|
status = "okay";
|
|
};
|
|
|
|
&spdif {
|
|
i2c-scl-rising-time-ns = <450>;
|
|
i2c-scl-falling-time-ns = <15>;
|
|
status = "okay";
|
|
};
|